PRE11 -If not maximized, windows desktop corrupted

I have just installed the PRE11 Trial on a Wndows XP SP3 system and a Windows 7 system. On both I notice the same incorrect behaviour. If run with the main PRE window so that it is not maximized, and then 'drag' the window around the desktop remnants of the PRE window are left behind concealing the desktop data that I was looking for. The only way to correct this is to maximize PRE and then minimize it.
Has anyone else noticed this?

The video card is an Nvidia 7300GT at the latest driver updated yesterday. Although this may be at the lower end of what is needed for video editing, I have successfully generated several videos.
Let me repeat my observation that the error can be exhibited with an empty workspace, so PRE is not using ANY CPU at all. All other applications manage to get the window redraw correct. Many years ago I was a programmer developing Windows GUI Applications, and these sort of issues used to occur because the application did not set the necessary indicators on the Windows API to cause a complete redraw after the window was resized. Could the same be true for PRE?
Has anyone else tried reducing the size of the main PRE window, and then dragging the window around the desktop.
I would also observe that PSE 11 Preview works perfectly in this area, I can reduce the size of the main windo and drag around to no ill effect.

Similar Messages

I have pulled pictures off of my windows desktop to a jump drive to try to put them on my macbook pro (OS 10.7) but they do not show up when I plug in the jump drive.

I have pulled pictures off of my windows desktop onto a usb jumpdrive to transfer to my macbook pro (OSX10.7). when I plug it into my macbook I do not see the picture files. Does OSX not recognize certain files from windows? They are standard .jpg files.

Hello RumDog,
I think this article will help you find the media in your library.
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Discovering and changing the iTunes Media folder location
Note: You would usually only change the iTunes Media folder location to share music between accounts on the same computer. See this article for specific steps on how to accomplish this. Also, see this article if you want to know how to move your music to a new computer.
Mac OS X: Click the iTunes menu and choose Preferences.
Windows: Click the Edit menu and choose Preferences.
Click the Advanced pane. iTunes displays the location of your iTunes Media folder.
You can then:
Note where your media folder is, such as for backing up your media.
Use the Reset button to reset it's location to the default (which is the iTunes folder).
Click the Change button to select a folder for a new location. Once you change this location:
If you make a new or alternate iTunes library, the new location will be used by that library.
Existing files will not be moved unless you choose File > Library > Organize library and choose the option to "Consolidate files."
From: Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Cheers,
Sterling

When I plugged in my iPad 3 into my windows desktop in iTunes it did not show up so I could work with it. How do I get it to show up????

When I plugged my iPad 3 into my windows desktop on iTunes the device did not show up. How do I get the device to show up to work with it????

Then do that.
Maybe you should read the User's Guide.

HT4946 how do i back up my music when my windows desktop is not synced to my ipod

how do i back up my music when my windows desktop is not synced to my ipod ?

See:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

Computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

computer will not boot up on usb cd rom to repair windows problem (corrupt file) what should i do

Which computer? Which Windows?
What are you trying to do?
-Jerry

Compiled executable does not open in maximized window

I have attached a JPG showing the VI Properties that pertain to Window size. Despite the fact that I have indicated in Run-Time Position - Position: Maximized. The compiled executable does not open in a maximized window.
Even stranger, if I take the shortcut for the program and change it's properties (on the target machine) to Open Maximized, it still doesn't open maximized.
I have had this behavior with every compiled executable for a couple of years using versions of LabVIEW 8, 2010, 2011 and currently 2011 SP1. Both the compiling machine and the target machine are Windows XP.
Is there any explanation for this behavior? Any way to correct it?
Solved!
Go to Solution.
Attachments:
VI Properties.JPG ‏81 KB

I think Ravens Fan is correct. The aspect ratio appears to take precedence over the window position.
You can set a property manually in your code to maximize the window.
http://zone.ni.com/reference/en-XX/help/371361H-01/lvprop/vi_fp_winstate/
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Clicking a link opens a smaller window, not a maximized window, how can I fix this?

When I click links that open in a new window, that new window is not maximized, like the browser window that I used to click the link. How can I fix this?
I prefer using new windows instead of new tabs, and I have been doing this forever. I had turned OFF the automatic updates for Firefox, but this newest update was installed anyway. If there is no setting to open all new links in windows the same size as the main window, is there an option to revert this update?

Hi Mumps,
There is a feature in Firefox that forces window.open() to open in a new window.
browser. block. target_new_window
Reference (http://kb.mozillazine.org/Firefox_:_FAQs_:_About:config_Entries)
Same window size should be default. It should open the window of the same size. Try to reset firefox if this is not happening. (about:support page > Reset)

Windows desktop application -- version of this file is not compatible with the version of Windows you're running

I am developing on 64-bit Windows7 Enterprise using VisualStudio 2013. I created a new Windows desktop VB.net application and just created a release build of the default solution/project targeting "Any CPU". I provided the EXE to a
colleague who is also running 64-bit Windows7 Enterprise but receives the following error...
"The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see
whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
I changed the build configuration to create a "x86" build but my colleague received the same error. Any ideas why this would be happening (I checked and my colleague has .Net4 Framework installed as well)? Thank you for your time and
response!
Sunish Abraham
"The version of this file is not compatible with the version of Windows you're running.
Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."

Hi sunisha,
According to your description, you'd like to run the application in your colleague's computer.
I provided the EXE to a colleague who is also running 64-bit Windows7 Enterprise but receives the following error...
If you want to test the application, you could provide the whole Debug folder to colleague instead of the single exe.
"The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
Check if the collegue's computer is running 64-bit windows:
Enter Control Panel, click on System and Security.
Under this, you can view the system type. This will describe whether you have 32-bit or 64-bit.
You can also try compatiblity mode.
If the program is not compatible, then you may try to install and run the program in compatibility mode.
Use the following steps:
1)   Right click on the Program
2)   Click on Properties
3)   Click on Compatibility tab
4)   Select Run this program in compatibility mode and select Windows Vista or whatever operating system the program was running successfully.
And if you still have questions, I suggest you deploy the application to the Local Network with clickOnce, then your collegue can install the application from the network.
#ClickOnce deployment
http://msdn.microsoft.com/en-us/library/t71a733d(VS.80).aspx
And also, you could recreate a new small application in your computer in Any CPU, then check if this small new application can work well in your colleague's computer. This can judge if the problem is caused by your application.
If you have any other concern regarding this issue, please feel free to let me know.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

After reopening Firefox does not remember which desktop was used for each window. Can you help, please.

I'm using two displays and several desktops on my Mac (OS X 10.9.4).
When I need to restart Firefox, it remembers to open windows from last session in correct display, but does not remember which desktop was used for each window. So when the application starts, it opens all windows on a desktop which is currently active instead of reopening them on desktops used during the last session. How to fix the issue?

Hi Nerva,
Thank you for your question, there is a add on I have been recommended to custom set up of opening windows in new monitors. It's called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master].
However, in regards to the session remembering which monitor the window was open in, in the profile folder there is a file that stores window positions and dimensions. It is called localstore.rdf.
Please stay tuned for more investigation, as there are definitely bugs on file for similar issues. Pinpointing it is the hard part.

Possible to Clone Windows Desktop and not to expand?

We want to use a 19" LCD Screen ond the first DVI and a Beamer on the second DVI output on a Sun Ray 2 FS. Both devices should show the same Windows XP desktop (we don't want to expand the Windows Desktop). Is this possible with VDI 3?

Not sure if it will achieve exactly as you want but, have you heard of splitview?
http://www.splitview.com/
Cheers,
Hardik

I can not get sync to work between my windows desktop and mac notebook

I have Windows Desktop, a mac notebook, and an android phone.. my desktop and phone sync fine, but i can not get my notebook to sync to my desktop..

Try rebooting your router.

TS4194 When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing. How do i fix this? Thank you in advance.

When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing. How do i fix this? Thank you in advance.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Odd graphical corruption of windows desktop - UPDATE

Hi,
Been running my new system for a couple of weeks now with no problems.
However today, after leaving the PC off all day, I came to turn it on to be presented with one strange looking windows desktop.
Multi coloured dots covered the screen, and although not heavily spread, they were evident.
They also appeared to move as on screen actions were carried out, for example, scrolling a page in IE.
After a warm reboot the problem has vanished, and hasn't occoured since (today).
Ive seen this kinda thing before with older cards, and it usually came down to some fundemental hardware issue.
Im hoping this isn't the case.....
Are there any known issues or problems that may causes this?
All temps were normal with the GPU at only 55 degrees.
Nothing is overclocked.
System config should be in my sig.
Thanks in advance.

Quote
Originally posted by Raven
it may or may not be your problem but your psu is crap.
q-tec is the worst of the worst and i would not even turn on a computer with it and its also way to weak.
when you cold start the computer uses a huge amount of power to spin up harddrives and fans for example.
and its possible that can affect the gfx card and when you reboot the card resets and it fixes itself.
yeah, thats the only part of the PC I didnt buy, it was actually given to me, and I had a feeling it was trash.
Still, Ive havent noticed any power related issues after 2 weeks, but I think it may be a good idea to swap it out for a good power unit.
Any suggestions as to a good one thats not too expensive?

NEW HP Pavilion 500-205t CTO Desktop PCComputer not loading Windows 7

For a year and a half, I had an HP pc that wouldn't load Windows 7 properly. I finally had enough and bought ANOTHER pc and it was delivered YESTERDAY. After spending $500 on a new tower, but before I added my printer or loaded any of programs or favorites on it, I discovered that this PC has the same issue!!! Now, I'm even more frustrated than before.
If I leave the pc without shutting it down, and press on any key or move the mouse to wake it up later, the only thing I have is the desktop picture. There are no icons, no way to do anything. Using control/alt/delete just gives me a blank screen.
I have to shut down with the power button, hold in until the screen says it's going to sleep, then push the power button back on. If I choose boot normally,it goes to the Windows logo screen, then it totally bypasses the "Welcome" screen (showing Windows Home Edition) and goes directly to the desktop. No icons appear and I have to repeat the first couple of steps and choose boot in safe mode or safe mode with networking. Then, I can shut down and restart and hold my breath until I see Windows 7 loading.
Originally, on my other pc, I thought it was the software itself. I ended up taking everything off my computer, saving to flash drives, and restoring back to the original state. This didn't help. I don't know if it was a hardware problem or a software problem, but the same issue came with this new unit.
Can someone offer me guidance? I have always loved HP and have a laptop, two desktops, an all-in-one printer, and two laser printers, all HP. However, this can certainly change real fast if I can't find a fix for this issue. (I ran HP's trouble shooter, but it didn't give me any information.)

Hi mrs5pennies,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your computer is not able to boot successfully, that the icons on your computer are not showing up, and I would be happy to guide you towards a resolution!
To begin, I recommend following this document on Computer Does Not Start (Windows 7). The sub-section you will need to click on is for Standard Steps to resolve most startup problems. This should help with the startup proccess of when your computer boots into Windows. The next step I would suggest would be to ensure that all of your important Windows Updates are completed. This can be done by following this document on how to Install Windows updates in Windows 7.
If the issue persists, please call our technical support at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Hp desktop p6218l, play mp3 128lb/s not smooth, windows 7 ultimate

help me!
Hp desktop p6218l, play mp3 128lb/s not smooth, windows 7 ultimate.Every driver is install
Thanks

I'm getting the same issue; I have winamp playing an mp3; openned internet explorer; scroll the mouse wheel.. and the sound emitting from my speakers is horrible.. song slows down as if processor processes through the sound.. need help

PRE11 -If not maximized, windows desktop corrupted

Similar Messages

Maybe you are looking for