Pre2 gets hot; touchscreen stops responding

I'm finding that my Pre2 gets 'warm' particularly when using the touchstone charger. Once it gets warm, the touchscreen stops responding. Restarting the device doesn't typically help, but normal service is restored once the 'phone cools down again having been removed from the touchstone.
By 'warm' I mean 'pleasantly warm in the hand' rather than 'frighteningly hot', but I've never noticed a 'phone get particularly warm before.
Is this a common fault / feature? Any advice gratefully received ...
Post relates to: Pre 2 p102ueu (Unlocked EU)

Thanks for the replies ... at least it's not just me!
As you say, Internet access is also an issue - five minutes of use seems to require five minutes of rest to cool down again. It's just not usable like that ...
The 'unresponsiveness' appears to afflict the keypad as well as the touchscreen - altogether pretty disappointing.

Similar Messages

Iphone 4s touchscreen stops responding after a minute or so, I then have to wait at least a minute before the touchscreen works again but soon after it stops responding. I have tried hard reset, turning it off over night, etc

Iphone 4s touchscreen stops responding after a minute or so, I then have to wait at least a minute before the touchscreen works again but soon after it stops responding. I have tried hard reset, turning it off over night, etc

Hello,
I had that problem as well and the apple support suggested to turn off the LTE-mode to have a running system and try to exchange the micro-sim by my provider.
THAT was not an option!
BUT it seems to solve my problem in the following way after trying a lot of possibilties:
In the menue properties/help (don't know the exact english word, because I run my phone in german)
I switched on the nice feature 'flash LED' by incomming calls, msgs, and push infos.
Today the flash feature was responding to different push notes very slowly.
By switching this feature off the LTE-mode-tochscreen-not-responding-problem disappeared.
We tried this on a other iphone, not having the metioned problem, and switched the LED-flash:
the problem appeared. Switching the LED-flash off: problem disappeared!
It seems to be a bug that the LED will hint Calls and MSGs in combination with the LTE mode!
treated my phone very hard today to double check, but its still ok.
@Apple:
Please fix that issue in the next update.
Hope, this helps you guys as well.

My touchscreen stopped responding to my finger and I can't unlock the screen...any idea how to remedy this problem?

My touchscreen stopped responding to my finger and I can't unlock the screen...any idea how to remedy this problem?

Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Pro cc gets stuck and stops responding constantly

For some reason my Premiere Pro CC will constantly get stuck performing a task, often incredibly simple ones, never complete it or even start it and then when I right click on it it says it's stopped responding and I have to close program and often restart teh computer and then whatever the task was works perfectly. This happens when adding a new file to the mediaborwser or when rendering something simple very very often. any thoughts?

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

Weblogic portal server getting problem it stops responding again again

i am using weblogic portal 10.1 from last few weeks i am getting continuous problem as the server stops responding. in the admin server logs i have found errors mentioned below
####<Aug 31, 2009 11:59:48 AM FJT> <Error> <ContentManagement> <content-oam> <AdminServer> <[ACTIVE] ExecuteThread: '24' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-74D57518D9A8B9659F4E> <> <1251676788241> <BEA-000000> <
com.bea.content.RepositoryException: java.sql.SQLException: The transaction is no longer active - status: 'Marked rollback. [Reason=weblogic.transaction.internal.TimedOutException: Transaction timed out after 66 seconds
BEA1-74D57518D9A8B9659F4E]'. No further JDBC access is allowed within this transaction.
     at com.bea.content.internal.server.dao.DaoBase.doDatabaseAction(DaoBase.java:287)
     at com.bea.content.internal.server.dao.DaoBase.doQueryActionAndCloseConnection(DaoBase.java:195)
     at com.bea.content.repo.internal.server.dao.NodeDao.hasChildren(NodeDao.java:595)
     at com.bea.content.repo.internal.server.persister.JDBCNodePersister.hasChildren(JDBCNodePersister.java:71)
     at com.bea.content.repo.internal.server.logic.NodeOpsLogic.hasChildren(NodeOpsLogic.java:1031)
     at com.bea.content.repo.internal.server.bean.NodeOpsBean.hasChildren(NodeOpsBean.java:321)
     at com.bea.content.repo.internal.server.bean.RepoNodeOps_ehgg7y_ELOImpl.hasChildren(RepoNodeOps_ehgg7y_ELOImpl.java:1229)
     at com.bea.content.repo.internal.client.common.Node.hasChildren(Node.java:233)
     at com.bea.content.spi.internal.NodeOpsBase.constructNode(NodeOpsBase.java:132)
     at com.bea.content.spi.internal.NodeOpsImpl.getNodesFromRepo(NodeOpsImpl.java:306)
     at com.bea.content.spi.internal.ExtendedNodeOpsImpl.getNodes(ExtendedNodeOpsImpl.java:55)
     at com.bea.content.manager.internal.InternalNodeOpsBean.getNodesImpl(InternalNodeOpsBean.java:952)
     at com.bea.content.manager.internal.InternalNodeOpsBean.getNodes(InternalNodeOpsBean.java:1950)
     at com.bea.content.manager.internal.NodeOpsEJB_ihurl6_ELOImpl.getNodes(NodeOpsEJB_ihurl6_ELOImpl.java:2776)
     at com.bea.content.manager.internal.NodeOpsImpl.getNodes(NodeOpsImpl.java:240)
     at com.bea.content.manager.servlets.jsp.taglib.SearchTag.retrieveNodes(SearchTag.java:598)
     at com.bea.content.manager.servlets.jsp.taglib.SearchTag.doStartTag(SearchTag.java:246)
     at jsp_servlet.__searchwap._jspService(__searchwap.java:351)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.portal.tools.servlet.http.HttpContextFilter.doFilter(HttpContextFilter.java:60)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:315)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
java.sql.SQLException: The transaction is no longer active - status: 'Marked rollback. [Reason=weblogic.transaction.internal.TimedOutException: Transaction timed out after 66 seconds
BEA1-74D57518D9A8B9659F4E]'. No further JDBC access is allowed within this transaction.
     at weblogic.jdbc.wrapper.JTSConnection.checkIfRolledBack(JTSConnection.java:178)
     at weblogic.jdbc.wrapper.JTSConnection.checkConnection(JTSConnection.java:188)
     at weblogic.jdbc.wrapper.ResultSet.preInvocationHandler(ResultSet.java:57)
     at weblogic.jdbc.wrapper.ResultSet_oracle_jdbc_driver_OracleResultSetImpl.next(Unknown Source)
     at com.bea.content.internal.server.common.dbaction.QueryAction.runExecuteStep(QueryAction.java:25)
     at com.bea.content.internal.server.common.dbaction.SqlStatementAction.execute(SqlStatementAction.java:115)
     at com.bea.content.internal.server.dao.DaoBase.doDatabaseAction(DaoBase.java:280)
     at com.bea.content.internal.server.dao.DaoBase.doQueryActionAndCloseConnection(DaoBase.java:195)
     at com.bea.content.repo.internal.server.dao.NodeDao.hasChildren(NodeDao.java:595)
     at com.bea.content.repo.internal.server.persister.JDBCNodePersister.hasChildren(JDBCNodePersister.java:71)
     at com.bea.content.repo.internal.server.logic.NodeOpsLogic.hasChildren(NodeOpsLogic.java:1031)
     at com.bea.content.repo.internal.server.bean.NodeOpsBean.hasChildren(NodeOpsBean.java:321)
     at com.bea.content.repo.internal.server.bean.RepoNodeOps_ehgg7y_ELOImpl.hasChildren(RepoNodeOps_ehgg7y_ELOImpl.java:1229)
     at com.bea.content.repo.internal.client.common.Node.hasChildren(Node.java:233)
     at com.bea.content.spi.internal.NodeOpsBase.constructNode(NodeOpsBase.java:132)
     at com.bea.content.spi.internal.NodeOpsImpl.getNodesFromRepo(NodeOpsImpl.java:306)
     at com.bea.content.spi.internal.ExtendedNodeOpsImpl.getNodes(ExtendedNodeOpsImpl.java:55)
     at com.bea.content.manager.internal.InternalNodeOpsBean.getNodesImpl(InternalNodeOpsBean.java:952)
     at com.bea.content.manager.internal.InternalNodeOpsBean.getNodes(InternalNodeOpsBean.java:1950)
     at com.bea.content.manager.internal.NodeOpsEJB_ihurl6_ELOImpl.getNodes(NodeOpsEJB_ihurl6_ELOImpl.java:2776)
     at com.bea.content.manager.internal.NodeOpsImpl.getNodes(NodeOpsImpl.java:240)
     at com.bea.content.manager.servlets.jsp.taglib.SearchTag.retrieveNodes(SearchTag.java:598)
     at com.bea.content.manager.servlets.jsp.taglib.SearchTag.doStartTag(SearchTag.java:246)
     at jsp_servlet.__searchwap._jspService(__searchwap.java:351)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.portal.tools.servlet.http.HttpContextFilter.doFilter(HttpContextFilter.java:60)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:315)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
>
####<Aug 31, 2009 11:59:51 AM FJT> <Error> <ContentManagement> <content-oam> <AdminServer> <[ACTIVE] ExecuteThread: '24' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-74D57518D9A8B9659F4E> <> <1251676791539> <BEA-000000> <
com.bea.content.RepositoryException: An error occurred while trying to find children for node id 162,041.
     at com.bea.content.repo.internal.server.dao.NodeDao.hasChildren(NodeDao.java:606)
     at com.bea.content.repo.internal.server.persister.JDBCNodePersister.hasChildren(JDBCNodePersister.java:71)
     at com.bea.content.repo.internal.server.logic.NodeOpsLogic.hasChildren(NodeOpsLogic.java:1031)
     at com.bea.content.repo.internal.server.bean.NodeOpsBean.hasChildren(NodeOpsBean.java:321)
     at com.bea.content.repo.internal.server.bean.RepoNodeOps_ehgg7y_ELOImpl.hasChildren(RepoNodeOps_ehgg7y_ELOImpl.java:1229)
     at com.bea.content.repo.internal.client.common.Node.hasChildren(Node.java:233)
     at com.bea.content.spi.internal.NodeOpsBase.constructNode(NodeOpsBase.java:132)
     at com.bea.content.spi.internal.NodeOpsImpl.getNodesFromRepo(NodeOpsImpl.java:306)
     at com.bea.content.spi.internal.ExtendedNodeOpsImpl.getNodes(ExtendedNodeOpsImpl.java:55)
     at com.bea.content.manager.internal.InternalNodeOpsBean.getNodesImpl(InternalNodeOpsBean.java:952)
     at com.bea.content.manager.internal.InternalNodeOpsBean.getNodes(InternalNodeOpsBean.java:1950)
     at com.bea.content.manager.internal.NodeOpsEJB_ihurl6_ELOImpl.getNodes(NodeOpsEJB_ihurl6_ELOImpl.java:2776)
     at com.bea.content.manager.internal.NodeOpsImpl.getNodes(NodeOpsImpl.java:240)
     at com.bea.content.manager.servlets.jsp.taglib.SearchTag.retrieveNodes(SearchTag.java:598)
     at com.bea.content.manager.servlets.jsp.taglib.SearchTag.doStartTag(SearchTag.java:246)
     at jsp_servlet.__searchwap._jspService(__searchwap.java:351)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.portal.tools.servlet.http.HttpContextFilter.doFilter(HttpContextFilter.java:60)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:315)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
com.bea.content.RepositoryException: java.sql.SQLException: The transaction is no longer active - status: 'Marked rollback. [Reason=weblogic.transaction.internal.TimedOutException: Transaction timed out after 66 seconds
BEA1-74D57518D9A8B9659F4E]'. No further JDBC access is allowed within this transaction.
     at com.bea.content.internal.server.dao.DaoBase.doDatabaseAction(DaoBase.java:287)
     at com.bea.content.internal.server.dao.DaoBase.doQueryActionAndCloseConnection(DaoBase.java:195)
     at com.bea.content.repo.internal.server.dao.NodeDao.hasChildren(NodeDao.java:595)
     at com.bea.content.repo.internal.server.persister.JDBCNodePersister.hasChildren(JDBCNodePersister.java:71)
     at com.bea.content.repo.internal.server.logic.NodeOpsLogic.hasChildren(NodeOpsLogic.java:1031)
     at com.bea.content.repo.internal.server.bean.NodeOpsBean.hasChildren(NodeOpsBean.java:321)
     at com.bea.content.repo.internal.server.bean.RepoNodeOps_ehgg7y_ELOImpl.hasChildren(RepoNodeOps_ehgg7y_ELOImpl.java:1229)
     at com.bea.content.repo.internal.client.common.Node.hasChildren(Node.java:233)
     at com.bea.content.spi.internal.NodeOpsBase.constructNode(NodeOpsBase.java:132)
     at com.bea.content.spi.internal.NodeOpsImpl.getNodesFromRepo(NodeOpsImpl.java:306)
     at com.bea.content.spi.internal.ExtendedNodeOpsImpl.getNodes(ExtendedNodeOpsImpl.java:55)
     at com.bea.content.manager.internal.InternalNodeOpsBean.getNodesImpl(InternalNodeOpsBean.java:952)
     at com.bea.content.manager.internal.InternalNodeOpsBean.getNodes(InternalNodeOpsBean.java:1950)
     at com.bea.content.manager.internal.NodeOpsEJB_ihurl6_ELOImpl.getNodes(NodeOpsEJB_ihurl6_ELOImpl.java:2776)
     at com.bea.content.manager.internal.NodeOpsImpl.getNodes(NodeOpsImpl.java:240)
     at com.bea.content.manager.servlets.jsp.taglib.SearchTag.retrieveNodes(SearchTag.java:598)
     at com.bea.content.manager.servlets.jsp.taglib.SearchTag.doStartTag(SearchTag.java:246)
     at jsp_servlet.__searchwap._jspService(__searchwap.java:351)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.portal.tools.servlet.http.HttpContextFilter.doFilter(HttpContextFilter.java:60)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:315)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
java.sql.SQLException: The transaction is no longer active - status: 'Marked rollback. [Reason=weblogic.transaction.internal.TimedOutException: Transaction timed out after 66 seconds
BEA1-74D57518D9A8B9659F4E]'. No further JDBC access is allowed within this transaction.
     at weblogic.jdbc.wrapper.JTSConnection.checkIfRolledBack(JTSConnection.java:178)
     at weblogic.jdbc.wrapper.JTSConnection.checkConnection(JTSConnection.java:188)
     at weblogic.jdbc.wrapper.ResultSet.preInvocationHandler(ResultSet.java:57)
     at weblogic.jdbc.wrapper.ResultSet_oracle_jdbc_driver_OracleResultSetImpl.next(Unknown Source)
     at com.bea.content.internal.server.common.dbaction.QueryAction.runExecuteStep(QueryAction.java:25)
     at com.bea.content.internal.server.common.dbaction.SqlStatementAction.execute(SqlStatementAction.java:115)
     at com.bea.content.internal.server.dao.DaoBase.doDatabaseAction(DaoBase.java:280)
     at com.bea.content.internal.server.dao.DaoBase.doQueryActionAndCloseConnection(DaoBase.java:195)
     at com.bea.content.repo.internal.server.dao.NodeDao.hasChildren(NodeDao.java:595)
     at com.bea.content.repo.internal.server.persister.JDBCNodePersister.hasChildren(JDBCNodePersister.java:71)
     at com.bea.content.repo.internal.server.logic.NodeOpsLogic.hasChildren(NodeOpsLogic.java:1031)
     at com.bea.content.repo.internal.server.bean.NodeOpsBean.hasChildren(NodeOpsBean.java:321)
     at com.bea.content.repo.internal.server.bean.RepoNodeOps_ehgg7y_ELOImpl.hasChildren(RepoNodeOps_ehgg7y_ELOImpl.java:1229)
     at com.bea.content.repo.internal.client.common.Node.hasChildren(Node.java:233)
     at com.bea.content.spi.internal.NodeOpsBase.constructNode(NodeOpsBase.java:132)
     at com.bea.content.spi.internal.NodeOpsImpl.getNodesFromRepo(NodeOpsImpl.java:306)
     at com.bea.content.spi.internal.ExtendedNodeOpsImpl.getNodes(ExtendedNodeOpsImpl.java:55)
     at com.bea.content.manager.internal.InternalNodeOpsBean.getNodesImpl(InternalNodeOpsBean.java:952)
     at com.bea.content.manager.internal.InternalNodeOpsBean.getNodes(InternalNodeOpsBean.java:1950)
     at com.bea.content.manager.internal.NodeOpsEJB_ihurl6_ELOImpl.getNodes(NodeOpsEJB_ihurl6_ELOImpl.java:2776)
     at com.bea.content.manager.internal.NodeOpsImpl.getNodes(NodeOpsImpl.java:240)
     at com.bea.content.manager.servlets.jsp.taglib.SearchTag.retrieveNodes(SearchTag.java:598)
     at com.bea.content.manager.servlets.jsp.taglib.SearchTag.doStartTag(SearchTag.java:246)
     at jsp_servlet.__searchwap._jspService(__searchwap.java:351)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.portal.tools.servlet.http.HttpContextFilter.doFilter(HttpContextFilter.java:60)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432)
     at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:315)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)

and a lot of errors like these and finally in logs at the end we find
####<Aug 31, 2009 3:27:02 PM FJT> <Error> <WebLogicServer> <content-oam> <AdminServer> <[STANDBY] ExecuteThread: '268' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1251689222980> <BEA-000337> <[STUCK] ExecuteThread: '207' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "2,040" seconds working on the request "Http Request: /WapWeb/siteController.jsp", which is more than the configured time (StuckThreadMaxTime) of "2,000" seconds. Stack trace:
     weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:35)
     org.apache.beehive.netui.pageflow.internal.DefaultReloadableClassHandler.loadClass(DefaultReloadableClassHandler.java:188)
     org.apache.beehive.netui.pageflow.FlowControllerFactory.getFlowControllerClass(FlowControllerFactory.java:533)
     org.apache.beehive.netui.pageflow.FlowControllerFactory.createPageFlow(FlowControllerFactory.java:189)
     org.apache.beehive.netui.pageflow.FlowControllerFactory.getPageFlowForPath(FlowControllerFactory.java:163)
     org.apache.beehive.netui.pageflow.FlowControllerFactory.getPageFlowForRequest(FlowControllerFactory.java:127)
     org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:244)
     weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:315)
     weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
     weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     weblogic.security.service.SecurityManager.runAs(Unknown Source)
     weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
     weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
     weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
>
####<Aug 31, 2009 3:27:03 PM FJT> <Error> <WebLogicServer> <content-oam> <AdminServer> <[STANDBY] ExecuteThread: '268' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1251689223109> <BEA-000337> <[STUCK] ExecuteThread: '206' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "2,040" seconds working on the request "Http Request: /WapWeb/siteController.jsp", which is more than the configured time (StuckThreadMaxTime) of "2,000" seconds. Stack trace:
     weblogic.utils.classloaders.ChangeAwareClassLoader.loadClass(ChangeAwareClassLoader.java:35)
     org.apache.beehive.netui.pageflow.internal.DefaultReloadableClassHandler.loadClass(DefaultReloadableClassHandler.java:188)
     org.apache.beehive.netui.pageflow.FlowControllerFactory.getFlowControllerClass(FlowControllerFactory.java:533)
     org.apache.beehive.netui.pageflow.FlowControllerFactory.createPageFlow(FlowControllerFactory.java:189)
     org.apache.beehive.netui.pageflow.FlowControllerFactory.getPageFlowForPath(FlowControllerFactory.java:163)
     org.apache.beehive.netui.pageflow.FlowControllerFactory.getPageFlowForRequest(FlowControllerFactory.java:127)
     org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:244)
     weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:315)
     weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
     weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     weblogic.security.service.SecurityManager.runAs(Unknown Source)
     weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
     weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
     weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
>
####<Aug 31, 2009 3:27:55 PM FJT> <Warning> <Socket> <content-oam> <AdminServer> <[ACTIVE] ExecuteThread: '212' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1251689275482> <BEA-000449> <Closing socket as no data read from it during the configured idle timeout of 5 secs>
####<Aug 31, 2009 3:29:59 PM FJT> <Error> <PortalAdminTools> <content-oam> <AdminServer> <[ACTIVE] ExecuteThread: '83' for queue: 'weblogic.kernel.Default (self-tuning)'> <Webmasters> <> <> <1251689399276> <BEA-415121> <the treeMode cannot be found>
####<Aug 31, 2009 3:29:59 PM FJT> <Error> <org.apache.beehive.netui.pageflow.internal.DefaultExceptionsHandler> <content-oam> <AdminServer> <[ACTIVE] ExecuteThread: '83' for queue: 'weblogic.kernel.Default (self-tuning)'> <Webmasters> <> <> <1251689399282> <BEA-000000> <Could not find exception handler method handleException for java.lang.NullPointerException.>
####<Aug 31, 2009 3:29:59 PM FJT> <Error> <org.apache.beehive.netui.pageflow.internal.DefaultExceptionsHandler> <content-oam> <AdminServer> <[ACTIVE] ExecuteThread: '83' for queue: 'weblogic.kernel.Default (self-tuning)'> <Webmasters> <> <> <1251689399283> <BEA-000000> <Could not find exception handler method handleException for java.lang.RuntimeException.>
####<Aug 31, 2009 3:29:59 PM FJT> <Error> <org.apache.beehive.netui.pageflow.internal.DefaultExceptionsHandler> <content-oam> <AdminServer> <[ACTIVE] ExecuteThread: '83' for queue: 'weblogic.kernel.Default (self-tuning)'> <Webmasters> <> <> <1251689399283> <BEA-000000> <Could not find message-resources for bundle org.apache.struts.action.MESSAGE>
####<Aug 31, 2009 3:29:59 PM FJT> <Warning> <global.internal.AbstractBaseController$LoggerCatalog> <content-oam> <AdminServer> <[ACTIVE] ExecuteThread: '83' for queue: 'weblogic.kernel.Default (self-tuning)'> <Webmasters> <> <> <1251689399283> <BEA-000000> <Exception occured trying to instantiate the null bean.
java.lang.NullPointerException
     at util.tree.TreeController.constructRootWithoutChildren(TreeController.java:483)
     at util.tree.TreeController.view(TreeController.java:172)
     at sun.reflect.GeneratedMethodAccessor637.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:879)
     at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
     at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
     at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
     at global.internal.AbstractBaseController.internalExecute(AbstractBaseController.java:348)
     at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
     at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
     at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
     at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
     at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
     at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
     at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1170)
     at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1201)
     at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
     at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.renderInternal(ScopedContentCommonSupport.java:266)
     at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.render(PageFlowStubImpl.java:135)
     at com.bea.netuix.servlets.controls.content.NetuiContent.preRender(NetuiContent.java:290)
     at com.bea.netuix.nf.ControlLifecycle$6.visit(ControlLifecycle.java:426)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:712)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walkRecursivePreRender(ControlTreeWalker.java:724)
     at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:146)
     at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:375)
     at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:341)
     at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:188)
     at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:142)
     at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:377)
     at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:253)
     at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:206)
     at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:191)
     at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:266)
     at com.bea.netuix.servlets.manager.PortalServlet.service(PortalServlet.java:656)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.jsptools.servlet.PagedResultServiceFilter.doFilter(PagedResultServiceFilter.java:82)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.portal.tools.servlet.http.HttpContextFilter.doFilter(HttpContextFilter.java:60)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:315)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
>
####<Aug 31, 2009 3:31:31 PM FJT> <Critical> <Health> <content-oam> <AdminServer> <weblogic.GCMonitor> <<anonymous>> <> <> <1251689491464> <BEA-310003> <Free memory in the server is 4,431,384 bytes. There is danger of OutOfMemoryError>
####<Aug 31, 2009 3:33:25 PM FJT> <Critical> <Health> <content-oam> <AdminServer> <weblogic.GCMonitor> <<anonymous>> <> <> <1251689605339> <BEA-310003> <Free memory in the server is 2,960,928 bytes. There is danger of OutOfMemoryError>
####<Aug 31, 2009 3:34:07 PM FJT> <Warning> <Socket> <content-oam> <AdminServer> <[ACTIVE] ExecuteThread: '133' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1251689647279> <BEA-000449> <Closing socket as no data read from it during the configured idle timeout of 5 secs>

Iphone Touchscreen stopped responding when a call came. weird problem.....

My iPhone was working fine. A call came and the touchscreen was not working. Touchscreen replacement was advised. I pressed the top right buttom and home button simultaneously for a restart and touchscreen was not working. I didn't have money so I brought it back home. After 3 weeks I put it for charge on my PC and first it showed charging sign...and then suddenly it asked for my password to unlock and the touchscreen was working fine. I charged fully and the iPhone worked perfectly fine for a day.
When I put it for charge the other day, the touchscreen stopped working. Same problem. I tried to restore factory setting option in which everything will be erased and copied again but error 1604 is coming.
Do I have to change the touchscreen? I don't think the touchscreen is damaged. Maybe software problem. Please help me, guide me.
Thank you in advance!

Well, the dropping may have damaged something, perhaps related to the lock mechanism. Just have it checked in a Care Center.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Whole touchscreen stops responding - major problem!

phone is one month old, has had no bumps or knocks, and suddenly today the touchscreen stopped working. no software updates had been done. all other buttons worked fine, but whole touchscreen behaved like an ordinary piece of glass. reboot only temporary fix, kept freezing within minutes or less, but home button & sleep button always worked - eventually reset whole phone with fresh software in itunes, took hours to set up again, lost all apps layout which is a total pain - and same problem is occuring!
anyone with a fix please reply (hint: this means YOU apple) as i just can't afford my super expensive phone to keep acting like a brick when i'm trying to use it!

thanks for the heads-up re:apple... silly me thinking apple techs might read this thread on an apple website
weekend here now so will head into the store if still doing it on monday... ive read a lot of 3GS users having this problem but not come across any other iphone 4 users as yet. if this problem sounds familiar, please comment, & state what you did to resolve it

IdeaCentre B530 Touchscreen Stopped Responding

Hello,
I've had my B530 for roughly a month and a half, and suddenly, today, the multi-touch feature has completely stopped responding. I have tried restarting the system, calibrating Pen and Touch, troubleshooting, using my fingernail, etc. Unfortunately nothing seems to work. Does anyone have any suggestions?
Thanks.
KayNev

Hello,
I've had my B530 for roughly a month and a half, and suddenly, today, the multi-touch feature has completely stopped responding. I have tried restarting the system, calibrating Pen and Touch, troubleshooting, using my fingernail, etc. Unfortunately nothing seems to work. Does anyone have any suggestions?
Thanks.
KayNev

TS1702 Touchscreen stops responding on fast movements

Hi guys,
I'm using the latest IPad and I am very happy with the device ) But I noticed a strange behavior: When I'm moving my finger very fast on the screen it sometimes "loses" contact - as if my finger (still on the screen) would not be there on screen anymore. Another touch with the same finger and tadaa, it continues to respond.
For example: When using a painting app and I move my finger very fast from one side of the screen to another side the line I painted only follows half of the way. Or if I'm moving on the home screen very fast from one side to another the screen suddenly stops and does not react on my finger anymore.
I already rebooted (sleep + home button), but it changed nothing. And it only happens when moved very fast.
Question: Is this a normal behavior and based on technical circumstances? Or is my device simply... uhm.... "broken"? Hope someone can help me
Ama

Sounds like you have VoiceOver (one of the accessibility features) 'on' - if you turn the volume up do you get a voice saying what you are tapping ? If you do then try triple-clicking the home button and see if that turns it off, and if it does you can then change what a triple-click does via Settings > General > Accessibility > Triple-Click Home.
If that doesn't turn it off then you can either turn it off directly on the iPad (you need to use a tap-to-select and then double-tap to activate/type process and 3 fingered scrolling) to go into Settings > General > Accessibility and turn VoiceOver 'off', or you can do it by connecting to your computer's iTunes : http://support.apple.com/kb/HT4064

Touchscreen stops responding in Mail app?

This started happening yesterday - haven't recently updated iOS (still on 5.1.1) or installed any new apps etc....
I'll open the Mail app, be browsing messages etc, and all of a sudden I can't type or click any of my messages or any other buttons in the app, however if I press the home button I can use everything else as normal... if I quit the process and then re-open the Mail app it works fine again for a little while but then stops......??
Any ideas?

I also bought a Dell Inspiron 15 7537 and I had the same problem as OP, but on Fedora 21 64-bit with Gnome 3.14. I haven't tried any other distros or DEs. However, both Arch and Fedora run systemd, so I think my solution work the same on both systems. I fixed it by doing the following steps:
1. Create a script that reloads the kernel module hid_multitouch.
$ sudo mkdir /opt/touchscreen-fix
$ cd /opt/touchscreen-fix
$ echo '#!/bin/sh
/sbin/rmmod hid_multitouch && /sbin/modprobe hid_multitouch' | sudo tee resume.sh
$ sudo chmod +x resume.sh
Executing this script after a resume will make the touchscreen work again. However, it will of course not run automatically after a resume.
2. Schedule the script to run after resume.
Create the systemd service file:
$ echo '[Unit]
Description=Fix touchscreen after resume
After=suspend.target
[Service]
Type=simple
ExecStart=/opt/touchscreen-fix/resume.sh
[Install]
WantedBy=suspend.target' | sudo tee /etc/systemd/system/touchscreen-fix.service
Enable it:
$ sudo systemctl daemon-reload
$ sudo systemctl enable touchscreen-fix
Done! And that's all! I'm not sure if you also might need to restart the computer for it to work.
To accomplish this I used the following resources:
https://wiki.archlinux.org/index.php/Po … leep_hooks
http://unix.stackexchange.com/questions … -at-resume
https://bugs.launchpad.net/ubuntu/+sour … omments/28
Last edited by MaTachi (2014-12-16 13:35:21)

My touchscreen stopped responding

Hi, my touchscreen is not responding after my new update to windows 8.1 i have tried going to the pen and touch setting but it has no option there, i tried the device manager but i dont see the mouse and other pointing device instead i see mice and other pointing device and it only has one option the alps pointing device, i tried configuring it but i need to touch the screen to do that, i dont know what else to do i miss the touch gesture and really need help fixing it. Thanks.

Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Why does my iPad 3rd gen. stop responding after 5 minutes of use? The home button still works but the touchscreen doesn't react.

This is getting incredibly annoying. I've had this thing for 3 months and I can't use it for more than 5 mins at a time because the touchscreen stops responding!!! I tried restoring it to its factory defaults and it still keeps messing up.

Make Sure iOS is updated to the latest version
Reboot the device by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings
If that doesn't work, then update iTunes on computer, backup device to iTunes, then restore the device.
iTunes: Backing up and Restoring iOS software
http://support.apple.com/kb/HT1414?viewlocale=en_US
Device not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US&locale=en_US
Finally, set up a repair

Lenovo Flex 10 touchscreen stops working after 1 hour of use.

Just bought a new Lenovo Flex 10 from a retail and it works perfectly except that after an hour of use the touchscreen stops working, the computer still works ok, but only with the mousepad. The notebook came with Windows 8.1, and I haven't installed any program on it. I need an urgent response please, since i've been looking for days in the community and other support pages, and still can't get a satisfactory answer and the period to get the a refund are about to expire.
Thanks in advance.

hi riglesias,
Welcome to the Lenovo Forums.
Once the Touchscreen stops responding, can you check the following:
1. Open System Properties and see if the Touch functionality is still there
- Link to picture (Touchscreen feature is not detected)
- Link to picture (Touchscreen feature is detected)
If the Touchscreen feature is detected, proceed to Step 2.
2. Press the Windows key‌ +R, type devmgmt.msc and press Enter. On the Device Manager, navigate to the Human Interface Devices section and uninstall anything that says HID-compliant device (this is the driver that controls the touchscreen). When finished, reboot the system and observe.
3. If the Touchscreen is still not working, hold the Shift Key and hit the restart button inside Windows and you should be able to see the image below then try to tap on the screen to test and observe. I
If the touch capability is still not functioning, I recommend you contact lenovo for service.
- Link to picture
- Support phone list
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Lightroom 2.3 stops responding with keyword reorg (win 64bit - Vista)

I am trying to re-organise my keywords - making them more heirarchical, and renaming some to keep things tidy. In doing this I'm constantly getting LR2.3 stop responding.
Some background info:
Now I have a fair few images in my current catalog - 40,000 (approx), which is stored on a dedicated WD raptor drive - which is the fastest drive I have. My CR2 raw files are split between my local disk (images being worked on), and a NAS device (older images). The Catalog is 1.3MB in size.
I would consider the quantity of images in my catalog and my setup to be something resembling that of a standard professional configuration, and I would have hoped that by version 2.3, the Lightroom code would have been better optimised to deal with the handling of large quantity metadata updates. I can only presume that Adobe have a lot more functional design and code optimisation on their to-do list for future revisions of LR - at least I'm desperately hoping so! The problem appears to be this:
In my keyword heirarchy, if I rename a top level keyword to something new, then it has to amend all image records in the database (catalog) - most of the 40,000 in my case, and I appreciate that this takes time to do. What LR doesn't do whilst these updates are taking place, is give any user feedback - it simply seems to stop functioning until it's ready to hand back user control to the operating system. The thing is, as you haven't got a clue what's going on, you just assume that the application has crashed - and for all I know it may have as all I see if I try to interact with lightroom during the hang is my task bar reporting that the application is "(not responding)". Looking at the Resource Monitor in Vista there seems to be a large network load during the time of the hanging - now I can't understand this as LR should simply be updating the records in the catalog which is on a local drive, and not having a need to access my raw files, many of which are on a network drive. If this is the cause of the slow down then it shows that there is a desperate need for revision of the functionality of Metadata updates within LR.
I'm just hoping that Adobe take stock and for future revisions of LR, concentrate on performance issues, and amending of functionality or code structure to better tune the handling of data, rather than just adding more tools and functionality to the release which slows the app even further. I'm just hoping that LR will fulfil my needs at a professional level at some point in the near future as this app is core to the running of my business - and at the moment it's having an impact on my ability to do exactly that!
Anyone else with performance issues like this?
Thanks, Paul A

This has nothing to do with network access. I have been running the Winessentials Process Monitor app to try to figure out what's going on and I firmly believe this to be an issue with the Lightroom code. Once LR stops responding, the Lightroom process seems to go into an endless loop consuming memory on each iteration (I.e. a memory leak). Process Explorer shows every file handle and (as the directory of images I am displaying holds locally stored images only) none of the file handles are for network based files - all local files. This is what it's using in a nutshell:
The catalog file (2 handles on this)
The Catalog journal file
the thubnail cache (2 handles on this)
a whole load of internet explorer data files inc: history.ie5\index.dat; cookies\index.dat; Content.ie5\index.dat (no idea why it requires IE data access)
a couple of truetype fonts
a few temporary files in the user temp folder
loads of windows device files
access to the C:\Program FilesCommon Files\Adobe\Adobe Version Cue CS4\Client\4.0.1 directory (even though I don't have version cue installed to my knowledge! - certainly no service running for this)
Private Bytes is now sitting at 1.9GB (RAM being used by LR) and its continually on the up.
During the hang, LR is trying to spawn a new thread and Process Explorer is reporting this as "Thread Lightroom.exe (6008): 6040" then moments later <Error Opening Thread>, then it loops, each time more memory is taken up.
Since updating this message the memory usage by LR is now at 2GB!
This has completely stopped responding now!
**UPDATE** After an hour of being non-responsive, LR burst back to life. I just amended one of the keyword tag options again (this tag matches against 21,000 images), removing the 'export with keywords' option, clicked OK and it's stopped responding again!
Paul A

Safari could not open page because the server stopped responding

"Could Not Open Page.... Safari could not open page because the server stopped responding"
....but it could worked just fine for the first 2 weeks of iPhone4 ownership.
WiFi network at home, working fine with MacBook, visiting friends' phones, my new iPhone4 - no problems. Had to power down the modem & router very briefly last night. Rebooted, MacBook connected fine, iPhone doesn't - it goes through the motions - shows all signs of full connection, full signal, password accepted etc etc - but web pages will not open, displaying after 30 secs the warning message above.
Tried at work on another wireless network - same response.
Have gone through all the FAQs, reset network settings, forgotten network etc - still nothing.
Anyone experienced the same and fixed it?
cheers

I'm having a very similar problem, but it's with my 3G connection, not with wifi. The display tells me there is 3G connectivity, and I get the loading symbol, but pages stop loading a few seconds after I try to open them, and some time later I get the "server stopped responding" message. That happens with addresses I know are working, such as Google. Some times, restarting the iPhone or the internet connection (by switching plane mode on and off) solves the issue, but it has been happening often these days.

Pre2 gets hot; touchscreen stops responding

Similar Messages

Maybe you are looking for