PRE8 driver issue or not?

Hi
I have just bought PRE 8 and installed it on my I7, Windows 7 64 bit, NVIDIA 250 GTS, 6gb ram.
I can start PRE8 editor once, but if I exit the application and try to start the editor again it won't start!
If I restart the computer i can run the editor application again, but if I exit and start over it won't start.
It just says lauching application and nothing more happen. Is this a driver issue?
I have the NVIDIA driver 195.62 or is it a PRE8 problem or is it a W7 64 bit problem?
Edit
I have tried the NVIDIA beta 195.81 driver and this does not solve the problem. What to do?
Update
The beta driver and a few reboots did the trick so far.
But can't i get rid of that annoying Welcome screen and start the editor directly, it seems to make the application start slower than it could be?
The same thing with PSE 8.

The Welcome Screen is part of each program's design, Aspis.
The only way around it is to use Ozpeter's utility, per the FAQs to the right of this forum.
http://forums.adobe.com/thread/503830?tstart=0

Similar Messages

R7770 / Win XP pro driver issue - directx not supported help please!

Hi guys sorry to bother you, and for such a long question.
I've just purchased a brand new MSI branded AMD radeon r7770 to replace my nvidia 8800gt graphics card which finally bit the dust last week.
Despite uninstalling the old nVidia drivers, trying the ones that came with the card and downloading and installing the very latest versions from both the AMD and MSI sites, I still cannot get directx to work. At first glance, the drivers look to be installed OK, (the Catalyst Control Center starts up etc) but none of my games run, and the desktop refresh is incredibly slow. KSP's crash log helpfully states that it cannot find the device driver. When I run Dxdiag.exe all the directx diagnostic tags are greyed out and the info box states that the card does not support directx.
The system is pretty ancient but should still be up to the task as it was a well speced gaming PC in its day:
Mboard: Asus P5K3 Deluxe (intel P35 chipset)
CPU: Intel core2duo Q6600 (quad-core)
mem: 4 gig Corsair ddr3 mem.
PSW: 600W
OS: Win XP pro SP3
I'm aware that this is an old PCI-E 1.0 board and the card is designed around PCI-E 3.0, but the computer boots up and starts Windows just fine. Both the Bios and Windows detect the R7770 correctly. (I'd have thought if this was an issue - it wouldn't go past POST at all and begin beeping like crazy!)
To muddy the waters still further, as a experiment, I installed an old radeon card for test (a crappy Sapphire hd 2600 pro PCI-E version), which is about the same age as the rest of the system.
I couldn't find the drivers disk initally, so downloaded the relevant ones from Sapphire and AMD. Got EXACTLY the same problem as above: it looks as the drivers have installed but no Directx support (which is daft as I used to use that card games until I could afford to replace it with the 8800)
I tried everything I could think of for hours (including disabling driver signing security, stopping anti-virus software, trolling through the windows/ inf, System32 and System dirctories to weed out anything ATI - you name it) then miraculously found the old drivers for the HD 2600. Installed them with no probem at all - everything worked just as it should!
So, I looks to me like the XP drivers on the web are now garbage. Anyone else have similar problems or know of a workaround?
I'm not exactly rich so can't afford Win 7 or the dreaded Win 8 (which I loath) or a new PC, which is why i'm soldering on with this dinosaur!
The only thing I haven't done is splat Windows and do a clean install, do you think that'll help? If so why did the old radeon drivers work (win has been cleanly re-installed many a time since I last used that card, so there was no legacy junk lurcking in the windows diectory or it's registry)
Do you think I'd have better luck with NVidia? If so could you kindly recommend an alternative from them? I know an R7770 is a bit OTT for such an old system, but they are dirt cheap at the mo and not much more expensive than much less powerful cards.
Anyone have any thoughts about UBuntu? If it is a driver issue or there is no workaround, I may need to consider this route. Trouble is none of my legacy games will run on Linux and i'm not sure virtualization is available for my mboard.
Anyways, thanks for your time and for any suggestions you might make
Regards
Mike

Hi Flex, thanks for the quick reply and for the advice.
In the end i got it going by changing the boot.ini settings.
They were initially set with the /3GB /fastdetect switch to force the WinXp kernal to run in 1GB, and not take up 2GB as is it's default.
It was set that way to stop a 32bit game (KSP) crashing every 10 minutes or so, through lack of addressable memory.
All I did was simply set the boot.ini back to its default and directx sprung to life. I reset it back to 3GB to make sure it wasn't a fluke and as soon as I did, it killed directx again.
Maybe its a driver issue afterall - probably lack of proper XP support by AMD (This dosen't happen with the old- - 2008 vintage - version 4 ATI radeon drivers.) or perhaps its because the card has twice the memory over my old cards and therefore needs to access a higher portion of I/O allocation than is available in 32bit WinXP.
Its all a bit ironic really as i'm finding the R7770 runs like crap under dirx9 - i'm getting about 30% the frame rate of my old Nvida 8800GT and, as I can't use the 3GB switch anymore, it crashes every 5 mins or whenever I play any resource intensive game.
As the crashes are caused by lack of available address spaces under 32 bit systems, I've bitten the bullet and got 64bit Ubuntu. Got this working in the wee small hours last night - including the R7770 using the AMD catalyst drivers for Linux. Hopefully that will sort things out (and gimmie an excuse to learn a proper OS!)
Wish me luck i can see another "steep learning curve" on the horizon!
Cheers
Mike

ThinkPad USB Keyboard with TrackPoint (55Y9053) driver issue (keys not working)

Hello!
I bought this external keyboard yesterday for my Dell desktop running windows 7 (professional) because I liked the thinkpad keyboard in my thinkpad t400. After plugging in to my desktop and installing the drivers that came in the CD, I noticed some keys (u, o, m, enter(return), l) were not working, i.e., nothing get displayed when I press those keys . When I tried installing it on thinkpad t400 running Windows 7 professional, the same non-working keys were displaying numbers instead of alphabet values.
Please note the keyboard is not 55Y9003 but the newer version 55Y9053. Also, note the trackpoint worked well including scrolling and all other keys were working. Interestingly, when I plugged this keyboard on Ubuntu machine (desktop and laptop), everything worked well without even installing any drivers.
I initially thought it was a hardware problem and got replacement from Amazon. Both the keyboards exhibit the same problem. Given the fact it works nicely on Ubuntu, I think this is a driver issue. I tried installing drivers from thinkpad site including versions 1.6 and 1.7.
I would appreciate if someone can help with the right drivers.
Thank you,
Vinai
Solved!
Go to Solution.

How does the keyboard compare to the one on the T400? I'm considering purchasing one for my desktop because I'm addicted to the TrackPoint.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

Hard drive issue, can not boot past disk utility

I got off work this morning and was wanting to do a clean install of osx10.10, unfortunately I did something bad, with my lack of sleep. I think I canceled the operation when I clicked cancel during the reinstall of OS X. Now I can not boot past the disk utility screen. There is also no sub menu under my listed hard drive "Macintosh HD." Is there a way I can fix this?
It's a brand new MBP, 15inch retina. I had it for only a week and I am at work right now. So if there is anything I can do from here that would be great!!
I also tried to reinstall OS X from the disk utility and when it asked to select disk to install OS X my only option was the recovery HD

Ok, I will try that. I still have my old MBP that I am supposed to be trading in. Good thing i haven't mailed it off yet.
I just reset the SMC and Pram and tried to boot in recovery. Once it downloaded everything online and i went to install OS X, it asked me to select and disk where i want to install. Well, there wasnt a disk listed at all...
So, now I will try to create a USB installer when i get home from work and try that out. I will keep you posted
Thanks,
Keith

Windows 8.1 not working properly, may be due to graphics driver issue

i have installed windows 8.1, but when i press widows key... the menu which opens is laging.... is it normal or some graphics driver issue... help required

Hi
It depands on the type of system/notebook you have installed windows 8.1 on
Please give us the Product # and the modle name of the notebook so that we can answer the question better and also try to find the right drivers if any.
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

When I plug in my Lacie Firewire 800 drive it causes certain apps to crash. Chrome will immediately crash when I open it, so will DVD player. It's only when I plug in my Firewire 800 drive, USB does not cause issues. What's the deal?

When I plug in my Lacie Firewire 800 drive into my Mid-2009 Macbook Pro running Mountain Lion - 10.8.2, it causes certain apps to crash. Chrome will immediately crash when I open it, so will DVD player. It's only when I plug in my Firewire 800 drive, USB does not cause issues. What's the deal?
I've restarted, verfied the disk, repaired permissions, smc reset.. don't know what else to do..

Contact Lacie since it's their product you are having issues with.

Super drive issue not working after upgrade of Maverick or Mountain Liont

Super drive issue not working after upgrade of Maverick or Mountain Liont
try this commands , it will wrk and respond after few trys
go to APPS - Utiltiy - Terminal
Put these commands in
drutil status
drutil info
drutil getconfig
drutil eject
it will keep ejecting for bit or sign of life in it and after couple try in 5 mins it will wrk. and dont waste ur money to buy new one .

Super drive issue not working after upgrade of Maverick or Mountain Liont
try this commands , it will wrk and respond after few trys
go to APPS - Utiltiy - Terminal
Put these commands in
drutil status
drutil info
drutil getconfig
drutil eject
it will keep ejecting for bit or sign of life in it and after couple try in 5 mins it will wrk. and dont waste ur money to buy new one .

HP DVD RAM UJ8DB Driver Issue, not updating, please help

Hi, I am trying to insert cd/ dvd but it does not detect any cd or dvd i found this issue today. It never showed this issue in the past. I checked on forums, opened device mangager and also tried to uninstall, restart and update or install driver for HP UJ8DB, but it doesn't fix it says windows has determined the driver software is up to date. Please help me fast i want to install antivirus software. I have windows 8.1 PC

It is not a driver issue:
http://support.microsoft.com/kb/314060
The above Microsoft article will take you through the possible issues. Does the drive show up in device manager? The BIOS?
Can you boot from it? It is likely either a corruption of the registry which the linked article shows how to fix, or the drive itself is bad and needs to be replaced. Post back to answer the questions so we can help.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).

Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

Very slow wine game/nouveau driver issue

Hello everyone, I'm trying to play a game (Civ 4) using wine. However, it was extremely laggy, and since it runs well on Windows (I have dualboot) plus it's not a very recent game and my laptop is reasonnably well-equipped, I thought it should work well on arch as well. Here is the link in the wine db. I should also add that I'm a very novice wine user so that might well be the (a) source of problem(s). Apart from the lagging, according to the sensors, the CPU's temperature rose from ~50°C to ~100°C within about A MINUTE.
I checked cpupower to see that the cpu was allowed to run at max speed and tried optirun to use the NVIDIA graphics card rather than the Intel graphics card I have installed. I'm by no means sure that the drivers are installed or configured properly by the way...
Starting with optirun looked to work (the loading screen came up) but when the main window should've been loaded, the application terminated with the following output:
err:winediag:wined3d_dll_init The GLSL shader backend has been disabled. You get to keep all the pieces if it breaks.
libGL error: dlopen /usr/lib32/xorg/modules/dri/nouveau_dri.so failed (/usr/lib32/xorg/modules/dri/nouveau_dri.so: wrong ELF class: ELFCLASS64)
libGL error: unable to load driver: nouveau_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: nouveau
libGL error: dlopen /usr/lib32/xorg/modules/dri/i965_dri.so failed (/usr/lib32/xorg/modules/dri/i965_dri.so: cannot open shared object file: No such file or directory)
libGL error: unable to load driver: i965_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: i965
[VGL] ERROR: glXCreateContextAttribsARB symbol not loaded
terminate called without an active exception
Before today I only used optirun for VLC (though I don't really see a difference) and to check whether it would run with glxgears. Neither case had any problems. I tried softlinking nouveau_dri.so from the "/usr/lib/..." to the "/usr/lib32/..." directory as well as copying it but neither helped.
Some info:
Graphic cards:
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/820M / GT 620M/625M/630M/720M] (rev ff)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
Packages:
local/xf86-video-intel 2.99.916-2 (xorg-drivers xorg)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-nouveau 1.0.11-1 (xorg-drivers xorg)
Open Source 2D acceleration driver for nVidia cards
local/nouveau-dri 10.2.8-1
Mesa drivers for Nouveau
local/bumblebee 3.2.1-3
NVIDIA Optimus support for Linux through VirtualGL
Some advice how to fix the driver issue or about what else might be causing the problems is greatly appreciated!

Besides agreeing with the notion above, you lack lib32-nouveau-dri and thus are unable to use acceleration with 32bit programs which is the undelying issue here.

Hard drive issues after update 10.10.3

Question also posted here:Hard Drive Issues (Both new and old)
I'm trapped in a HDD nightmare with my MacBook Pro mid-2012.
I updated to Yosemite 10.10.3 (with the Photos app). A couple of days after the update, I was watching a movie on my TV screen via HDMI. In the middle of the movie I removed the HDMI cable from the MacBook Pro and everything freezes. I forced shut down (Note: My HDD was encrypted). After I forced shut down, I tried to turn on and the loading screen would never stop loading - like, 14 hours stuck with the progress bar. Since I have backups, I decided to access DU and format my HDD. I tried everything. For real. Every command line I could type on Terminal to format, repair, erase and/or partition. I read almost every issue-related questions on the forums and stack exchange groups for a week (even posted my issue here: http://apple.stackexchange.com/questions/181090/erasing-and-partitioning-hard-dr ive-from-internet-recovery?noredirect=1#comment215695_181090).
So, I decided that it was a HDD failure and bought a new one.
I bought the Seagate 1TB SSHD Hybrid - ST1000LM014. Installed the new fresh disk and guess what? All those same problems again. I´m not able to restore from Time Machine because it doesn't recognize the disk in the restore page. But the disk is recognized in the DU. When I try to erase or partition the new SSHD, the same old errors: File system formatter failed. Yes, I tired GUID Partition Table, all of the security options, etc.
Please. Any light that you can throw at this issue, I'll be very grateful for. BTW, the new SSHD is recognized and the SMART Status says: Verified.
Any ideas on *** is going on?
Thanks in advance!
MacBook Pro (13-inch Mid 2012), i7, 8GB RAM

After I erase the hard drive (I assume one pass of writing zeros is good enough, 7 passes not needed?) do I turn off the laptop, then turn on and insert the Install Disk? Will there be a prompt telling me when to put in the disk? Or do I put in the disc right after erasing?
One pass is fine. If you've previously backed up your hard drive to an external hard drive using SuperDuper!, which is what I use and recommend, or another program, if it created a bootable drive, you want to boot off of it, bring up SuperDuper! and copy the drive back to the internal hard drive. SuperDuper also makes the drive bootable. When done, reboot, and you should be all set. If you're using Time Machine, you'll want to install the operating system, then restore the Time Machine backup. SuperDuper! is available from http://www.shirt-pocket.com/superduper/superduperdescription.html
Finally- should I update the OS? Is there a problem with the newest update that caused this crash, or was it just a spurious glitch/bad luck?
I've been running 10.5.8 for awhile with no issues, and would recommend moving to it.

Error message: The scn engine received a request fro an I/O driver which is not currently installed on the controller.

Hi,
I am currently working in a new application with a cRIO system and I am having some issues when try to run a VI. My actuall configured hardware is as follow:
-cRIO-9113 4 slot chassis
In this chassis I have installed 3 NI 9514 servo interface modules in slot 1, 2 and 3
-cRIO-9022 Real-Time Controller
-NI 9144 8 slot expansion chassis
In this chassis I have installed:
-Slot 1: NI 9213 (16ch thermocouple inputs module)
-Slot 2: NI 9201 (8ch ±10 V analog input module)
-Slot 3: NI 9263 (4ch ±10 V analog output module)
-Slot 4: NI 9426 (32ch sourcing digital input module)
-Slot 5: NI 9426 (32ch sinking digital input module)
-Slot 6: NI 9476 (32ch sourcing digital output module)
In the controller I have installed the following softwares:
-IndCom for EtherCAT Scan Engine Support 1.2.0
-LabVIEW NI SoftMotion Module 9.0.0
-LabVIEW NI SoftMotion Module Scan Engine Support 9.0.0
-LabVIEW Real-Time 9.0.1
-LabVIEW PID and Fuzzy Logic Toolkit 9.0.0
-Web Server for LabVIEW RT 2.0.0
-Language Support for LabVIEW RT 1.0.0.3
-NI Scan Engine 1.1.0
-NI Scan Engine Advance I/O Access 1.1
-NI-Motion 8.0.0
-NI-RIO 3.4.0
-NI-RIO IO Scan 1.4
-NI-VISA 4.6
-NI-VISA Server 4.6
Well, I made VI to test my inputs and outputs, and the problem that I am having is that when I try tu run the VI, in the deployment window I get an error message that read: The scan engine received a request for an I/O driver which is not currently installed on the controller.
Apparently there is another driver that I need to instal in the controller, but I have no idea of what driver could be. If someone have any idea of what this problem could be, I really will appreciate your help.
Ferdinand Martinez
FMO Automation LLC

Hi nausfaratu,
Can you elaborate a little further? What are you doing in your VI? Are you getting this error when you build it into a Real-Time Application (EXE) or when you just run it from the development environment? Is that the recommended set of software or did you do a custom software install on the controller?
Aaron P
National Instruments
Applications Engineer
http://www.ni.com/support

DVD & Blu Ray Burner Drive Trays Do Not Stay Open When Media is in the Drive

I have a problem with both Windows 8/8.1 and the Windows 10 Technical Preview (there is no issue when I run Windows 7).
I have 2 optical drives: 1) DVD Burner and 2) Blu Ray Burner (I just got the second drive a few weeks ago). They are attached to the secondary SATA Chip (see below for specifics).
The problem I'm having is that when I eject media from either drive, the drive does not stay open, but rather immediately closes. Before I got the Blu Ray Burner, I had this problem with just the single DVD Burner by itself. I was hoping when I installed
Windows 10 Technical Preview that this problem would not be present, but it is present in that O/S as well.
This problem will repeat continuously if I attempt to use the eject button and so I either have to grab the disc while the tray is moving, or if I press the eject button again on the drive at the right time, I can get it to re-open and not close (this
is tricky to get the button timing right as it seems like it has to be done close to when the drive tray is fully extended when it starts retracting). It usually takes me 5 to 10 button presses to get it to stay open. Sometimes it will stay open for about
0.5 to 1s before it closes again, but most of the times it just immediately closes. I also have the same problem if I use the software eject feature by right clicking on the drive and choosing eject.
Of course, the expected behavior is that pressing the eject button should open the tray, but not close it immediately allowing you to remove the disc.
Here is some background information about my system and how the drives are connected:
1. Motherboard: Gigabyte GA-EP45-ED3P Revision 1.0 LGA 775
2. Interface (for both drives): Gigabyte SATA II Chip - 2 x SATA 3 GB/s connectors (GSATA2_0, GSATA2_1) supporting up to 2 SATA 3 GB/s devices
3. Memory: 8 GB (4 x 2 GB)
It should be noted that I tri-boot between Windows 7, 8/8.1, and 10 Technical Preview and that this issue is not present in Windows 7, but has always been there in Windows 8/8.1 and now it is present in 10TP as well.
I've had this system for just over 6 years now and it is still going strong. It should be noted that I have both drives on the secondary SATA chip (as identified above), which is meant to be used with removable SATA devices.
Since the problem exhibits itself in both Windows 8/8.1 and 10TP, a reinstall of the O/S will have no affect on this problem and so this appears to be some other issue that is consistent between Windows 8/8.1 and 10TP.
I'd appreciate your support in looking at this issue - thanks!
Matt Caspermeyer
P.S. I also submitted this feedback through the Insider Program.
Matt

Hey Zagayer,
Thanks for using Apple Support Communities.
As you now have two optical drives in your Mac Pro, you need to be able to choose which drive to eject. That is built into the system. You just hold the Option key while tapping eject for the 2nd drive.
OS X Mountain Lion: Eject a disk
http://support.apple.com/kb/PH10613
If your computer has two optical drives, hold down Option-Media Eject or Option-F12 to eject a disc from the second drive.
Have a nice day,
Mario

Apple iPod USB Device driver issue on Win XP - syncing shuffle 2nd gen.

Hello fellow iPod shuffle users. Any of you run into this problem using the following configurations? Any advise/recommendations/workarounds much appreciated as I've burned 3 days on this issue and I'm still stonewalled.
I personally think it's a device driver issue/bug and am searching for a way to update my Apple iPod USB device driver for Win XP. Two brand new ipod shuffles (received for Christmas 2008) are both behaving this way, so the problem most likely points to a global software issue more-so than to shuffle hardware issue.
PROBLEM STATEMENT: Driver data i/o streaming issue does not allow shuffle to sync data with iTunes after initial sync (i.e. reading the content of the shuffle is good, but writing modified content fails). Posted error message "The ipod ... cannot be synced. Required disk cannot be found". After cracking the hood on my device driver, the problem seems to point to the Apple iPod USB device driver for Win XP. Driver will recognize the shuffle and read to it, but subsequent write attempts will result in device driver balks that "this device cannot start (code 10)".
ATTEMPTED WORKAROUNDS:
*Read All "How to Get Started Manuals" to make sure I was using the right technique for syncing my two shuffles from within iTunes... tried and failed
*Ensure only one shuffle was plugged in at a time (saw notice that two shuffles plugged in at the same time is not yet a supported config)... tried and failed
*The 5 R's as recommended by Apple Support... tried and failed.
*I've tried all 3 built in USB ports on my Lenovo T60. no love... tried and failed.
*Per discussion board: From Window's Device Manager-> Scaned for new hardware while shuffle was syncing...tried and failed.
* Per Discussion board: From Window's Disk Management -> Ensured shuffle came up as a FAT32 filesystem... connection tore down as quickly as windows recognized it.... tried and failed.
*From Windows Software config utility: Ran repair to re-install itunes 8... same results.
*From Windows software management utility: Uninstalled and reinstalled itunes 8... same results.
Hardware: IBM Thinkpad/Lenovo T60. Using build in k/b & no external mouse. Has 3 USB built in ports.
Software: Windows XP Pro SP2/iTunes 8.0.2/shuffle (2nd gen) driver 1.0.4 (same behavior using the original driver 1.0.3).
Apple iPod USB Device properties:
Driver Provider - Microsoft
Driver Date - 7/1/2001
Driver Version - 5.1.2535.0
Digital Signer - Microsoft Windows Publisher

Hi. Ive got pretty much the same problem.... Got a new shuffle for christmas..having real problems syncing with itunes. Funnily enough I managed to get 25 tracks on it but then it just stopped. error message says " The ipod shuffle cannot be synced. The required disk cannot be found." Ive done restore, and downloaded a reset utility thingy to try but still no joy.

Windows 7 Driver Issue

I cannot get my windows 7 home premium N (64-bit) PC to load the driver for my iphone 3g. I formatted my hard drive and reinstalled a fresh OS (windows 7) trying to fix this issue (moments ago).
The computer knows that it is an iphone. It shows up in the device manager under "other devices" and is listed as "iphone" with the yellow ! next to it. It is not showing up under Universal Serial Bus controllers.
I have tried to update the driver - pointing to the path C:program files(x86)/commonfiles/apple/mobiledevicesupport - with no luck. I have tried to uninstall the device and reinstall it. I have tried all usb ports on my computer. I have tried different usb cables (all apple) and had no success. My iphone will successfully connect to my father's computer (vista) with no problems. It will also connect to my G4 laptop and sync without issue. so it is not an iphone hardware issue. this is specific issue with my PC.
I even tried manually downloading the driver off of a website and still no luck. The message I get when connecting is "Device driver software was not successfully installed," with a red X - No driver found in the dialog box.
I just installed the latest itunes on a newly formatted drive. still no luck.
I am getting very frustrated and have tried all advice found on the web - including all recommendations at the apple support site.
Please help!

Seach the forum for P55 chipset - that might give you some insight.

PRE8 driver issue or not?

Similar Messages

Maybe you are looking for