PrE9 mts files in organizer and PrE9

Did anybody experience problem with mts files being properly read (video and audio) in organizer, but once imported in PrE9.0 only video is imported.
I guess if they are properly read in organizer, this means that the appropriate codec is installed on my system (Win 7 ultimate 64bits).
So why only video is imported?
Thanks for any suggestion

Here is result for 1440x1080 next for 1920x1020
ID de menu
: 1 (0x1)
Format
: AVC
Format/Info
: Advanced Video Codec
Profil du format
: [email protected]
Paramètres du format, CABAC
: Oui
Paramètres du format, RefFrames : 2 images
Paramètres du format, GOP
: M=2, N=13
Identifiant du codec
: 27
Durée
: 28s 520ms
Type de débit
: Variable
Débit
: 10,8 Mb/s
Débit maximum
: 16,0 Mb/s
Largeur
: 1 440 pixels
Hauteur
: 1 080 pixels
Format à l'écran
: 16/9
Images par seconde
: 25,000 Im/s
Espace de couleurs
: YUV
Sous-échantillonnage de la chrom : 4:2:0
Profondeur des couleurs
: 8 bits
Type d'image
: Entrelacé
Ordre des images
: Ligne du haut d'abord
Bits/(Pixel*Image)
: 0.277
Taille du flux
: 36,6 Mio (90%)
Audio
ID
: 4352 (0x1100)
ID de menu
: 1 (0x1)
Format
: AC-3
Format/Info
: Audio Coding 3
Extension du mode
: CM (complete main)
Identifiant du codec
: 129
Durée
: 28s 608ms
Type de débit
: Constant
Débit
: 448 Kbps
Canaux
: 6 canaux
Position des cannaux
: Front: L C R, Side: L R, LFE
Echantillonnage
: 48,0 KHz
Profondeur des couleurs
: 16 bits
Mode de compression
: Avec perte
Délai par rapport Vidéo
: -80ms
Taille du flux
: 1,53 Mio (4%)
Texte
ID
: 4608 (0x1200)
ID de menu
: 1 (0x1)
Format
: PGS
Identifiant du codec
: 144
Durée
: 28s 15ms
Délai par rapport Vidéo
: -80ms
1920x1080
Général
ID                               : 0 (0x0)
Nom complet                      : C:\Users\Jean-Yves\Videos\Corps Juin-Sept 2011\00190.MTS
Format                           : BDAV
Format/Info                      : Blu-ray Video
Taille du fichier                : 51,8 Mio
Durée                            : 25s 504ms
Type de débit global             : Variable
Débit global moyen               : 17,0 Mb/s
Débit global maximum             : 18,0 Mb/s
Vidéo
ID                               : 4113 (0x1011)
ID de menu                       : 1 (0x1)
Format                           : AVC
Format/Info                      : Advanced Video Codec
Profil du format                 : [email protected]
Paramètres du format, CABAC      : Oui
Paramètres du format, RefFrames : 2 images
Paramètres du format, GOP        : M=2, N=13
Identifiant du codec             : 27
Durée                            : 25s 400ms
Type de débit                    : Variable
Débit                            : 15,9 Mb/s
Débit maximum                    : 16,0 Mb/s
Largeur                          : 1 920 pixels
Hauteur                          : 1 080 pixels
Format à l'écran                 : 16/9
Images par seconde               : 25,000 Im/s
Espace de couleurs               : YUV
Sous-échantillonnage de la chrom : 4:2:0
Profondeur des couleurs          : 8 bits
Type d'image                     : Entrelacé
Ordre des images                 : Ligne du haut d'abord
Bits/(Pixel*Image)               : 0.306
Taille du flux                   : 48,1 Mio (93%)
Audio
ID                               : 4352 (0x1100)
ID de menu                       : 1 (0x1)
Format                           : AC-3
Format/Info                      : Audio Coding 3
Extension du mode                : CM (complete main)
Identifiant du codec             : 129
Durée                            : 25s 504ms
Type de débit                    : Constant
Débit                            : 448 Kbps
Canaux                           : 6 canaux
Position des cannaux             : Front: L C R, Side: L R, LFE
Echantillonnage                  : 48,0 KHz
Profondeur des couleurs          : 16 bits
Mode de compression              : Avec perte
Délai par rapport Vidéo          : -80ms
Taille du flux                   : 1,36 Mio (3%)
Texte
ID                               : 4608 (0x1200)
ID de menu                       : 1 (0x1)
Format                           : PGS
Identifiant du codec             : 144
Durée                            : 24s 895ms
Délai par rapport Vidéo          : -80ms

Similar Messages

Problems importing .mts files to organizer

I just installed Photoshop Elements and Premier Elements 9. I imported all my pictures and itworked fine. However, the organizer immediately stopped working and closed after I imported my .mts video files. When I try to restart the organizer, it starts up and then immediately freezes and I get a "Elements 9 organizer has stopped working" message and then it shuts down again.
I tried dragging the .mts files directly into the organizer and if I only do one it works fine. However, I get the same error when I try adding a second .mts file the same way. I'm running Windows 7 with 9GB of RAM and an Intel i7 930 processor, so hardware shouldn't be a problem. The videos also run fine on other software, so I'm pretty sure they're not corrupted. I also tried uninstalling both programs and then reinstalling them, but I get the same error. Any ideas on what the problem is or a fix? Tech support couldn't help me and it will be very frustrating if I can't use the organizer for my videos.

I also have a Canon HF200 Camcorder that uses .mts files and just purchased Premiere Elements 8 two months ago. The .mts files will download to the organizer without problem, but both the downloader and the organizer show blank thumbnails. This makes it very difficult to know which clips you are looking at without previewing them first. I have tried converting to .m2ts files, as some suggested, but this does not work either.
I just read of the release of Premiere Elements 9, Has this problem been fixed in Premiere Elements 9?
I am using a new computer with an i7 920 @ 2.67GHz on Windows 7 Ultimate 64bit.
Thanks.

How to edit a file from Organizer and return it to Organizer?

In PSE5, in Organizer, I want to fix a photo. I right-click it and "go to quick fix" or"go to full edit". Editor opens up, I edit the photo, and want to return to Organizer. How to do that? If I try to save, I have to go through several dialogs, including warning that I'm about to replace an existing file, and default option to save a version; which all looks like I'm creating another instance of the file. Or, if I want to fix multiple files, I select them all in Organizer and go to quick fix; once I have finished, I don't see how I can commit all changes back to Organizer (which is showing "edit in progress" on them meanwhile) - I have to save each individual file, going every time through those several dialogs. Am I missing something obvious?

Not missing anything, that's how it works. If you want to replace the
file, go ahead, but most people keep a separate version, so you have
your original, and then the one they changed. That way, if you don't
like what you did, you can always go back to the original. You should
get something like: IMG_001.jpg (let's say that's your original file),
and then IMG_001-edited-1.jpg as the next one in the version set. This
is how Elements works. Most editing does change pixels, so you actually
have a new file. (I know that some editors/organizers do support
non-destructive editing, but you are very limited in what things you can
do.)
-Trish

Elements saves files but organizer and editor loose them

Running Elements 12 on Win 7. I download files from SD card from camera to a subdirectory and they seem to get copied to two places at once. When I work with the files, they open from one of those places but edits save to the other and are not opened again. So, edits seem to disappear. I am unable to load them again without doubling them up in the catalogue.
I assume this is an error in the download (copying process but it is not obvious to me.
I have checked other files downloaded years ago into one folder and I am seeing the same error. I edit a file, save it, and close it and organizer doesn't know where it is. If I open the same file in editor, edit it again, and save it, editor knows this is the second edit, saves it, and organizer again does not find it. Even though checking shows it is saved to the same directory.

In that same window there should be a series of buttons where you choose to see PSE options, PRE options or both.
EDIT However, I doubt you can make this work. Hardly anybody would do it this way, so it's not surprising that PSE isn't set up for it, but FWIW, it's also a problem with things like certain versions of PS with particular versions of organizer.

HT3775 How do I import AVCHD (.mts) files to iphoto and quicktime

How do I import,save, and play AVCHD (.mts) files to iphoto '11 and/or Quicktime?

First thing I'd try is deleting the iMovie Preferences. In the Finder, hold down the Option key and select Library from the Go menu. Navigate to the Preferences folder and find the com.apple.imovie.plist file and delete it.
Try opening iMovie.
If that doesn't work, restart holding down the shift key. It will run some disk checks (progress bar displayed), and then boot to the login window. It will say it is in safe mode on the login screen. Log in and check if iMovie works in safe mode.
From there, I'm not sure. Maybe boot into recovery hd and repair the disk.

Is there any way to open .mts files in Qicktime and FCPX?

Is there any way to open .mts files on the Mac? I am reffering ti opening them in Quicktime and in FCPX. My camera costs a LOT, and I think it's ridiculous that I can't open these files. I can't even find a decent conversion tool to do it for me. Please help!

I just checked this link and it's looks like FCPX have no problem to open it.
http://www.fileinfo.com/extension/mts
.mts is also called AVCHD.
I also check FCPX Documentation here : http://help.apple.com/finalcutpro/mac/10.0.6/#ver2833f855
And it say it can support AVCHD videos.
VLC also support it for watching the video and anyway Quicktime X is useless with many codecs.
Check again to import files in FCPX as i can't test i don't have any .mts files.
Hope this help.
You can read this also if you want to convert them : https://discussions.apple.com/thread/1412182?start=15&tstart=0
I will say it's better to use Handbrake, anyway it's what i use.

Importing MTS Files into organizer

I have about 70 files that are .MTS without the directory structure. When I important them into organizer, they are vertically stretched. How can I fix this?
I have a feeling this question has been answered, but after 45 minutes of searching the forums I was unable to find it.
Regards,
Fan

Fan,
Welcome to the forum.
Unfortunately, you have posted to the Tips & Tricks sub-forum, which is basically a repository for articles on how to do things in Premiere, and gets very few "eyes." Maybe our MOD, Steve Grisetti, can move this out to the main forum, so that more can see it, and can help.
I do not use MTS material, so am not an expert in this area. However, if footage is being stretched, or squeezed, it is usually an issue with the PAR (Pixel Aspect Ratio), and Premiere not picking up the flag for the footage correctly. See this ARTICLE for more background. Usually, one can use Interpret Footage in the Project Panel, to force Premiere to "see" the correct PAR.
Good luck,
Hunt

Organizer 8 terminates when downloading/importing MTS file

I am in Organizer trying to download a video file (MTS) from a memory card. The file shows up for me to select when I do the File > Get Photos & Videos > From Camera or Card Reader. I select it and click done. Then I get the message "Files Successfully Copied" with the message that Organizer will now import the file into the catalog. It asks if I just want to see the catalog entries that were imported. I click Yes. I get a window saying "Getting Media". That window stays up for a few seconds then goes away along with the whole Organizer task.
When I restart Organizer I get a dialog box saying Files Ready for Import. New files have been downloaded and will now be imported. It then asks again if I just want to see catalog entires that were just imported. I say Yes. Again it says Getting Media for a couple of seconds then Organizer again shuts down with no error message.
In order to get out of this "loop" I have to go to the folder where the offending file was downloaded into and delete it. Then when Organizer restarts and tries to again import it, the file isn't there and Organizer displays that in an error message but continues running.
I've reinstalled Photoshop Elements and Premier Elements 8. The file is playable on the camera and other MTS files created around the same time download/import with no problem.
Any suggestions on how to get that MTS file into Organizer?

Mike is having some trouble posting in this thread (and I am too), but he sent me a PM with what he wanted to say:
OK. I think I might have a positive answer for you.
I was getting lost in the upper ASCII characters you showed. In your test file I never could see any--a case of not seeing the trees for the forest.
Your quote marks are getting dropped in your test file. Now, this may or may not affect other factors but it does in some further testing. I believe ID has an issue with dropping quote marks even in a plain ASCII file if the marks are at the beginning of a sentence and the file is tab delimited. Call it a bug.
Because of all the commas and quote marks in your simple file, I think you should be exporting from Google Docs' spreadsheet as a tab-delimited file. This exported file has to be opened in a text editor capable of saving it out as a UTF-16 BE (Big Endian) type of file.
Also, I think you are going to have to use proper quote marks throughout, or change them in the exported tab-delimited file. Best to have a correct source, though.
Here is your sample ZIPped up. I think it works properly. But then again, I think I might be bleary-eyed by now.
http://www.wenzloffandsons.com/temp/merge_psalms_utf-16.zip
Take care, Mike

I need a definitive answer for using Premiere Pro CS4 to work with .m2ts and .mts files

I have a Canon Vixia HF20 and a Sony HDR-XR350V. The Canon gives me .MTS files and the Sony produces .M2TS files. What do I need to do to be able to work with these files in Premiere Pro? I've searched and gotten that I'll need to purchase a codec. But are both file types going to be good with one codec?
Also, what are the steps to getting started? Purchase the codec, load the codec...Will there be any other steps to working with the files in Premiere?
I'm sorry for the basic questions, I'm a photographer! I've never worked with video before, and this is HARD!
Thank you for your help,
Michelle

Hi, Michelle.
I'm nowhere near the authority on this stuff that many of the others are here, but I have Premiere Pro CS4 and I work directly with AVCHD .mts files from my Panasonic camera. I simply browse to the directory where the .mts files are located and drag them into the project. I didn't need to purchase any additional codec, this is natively supported in Premiere CS4.
I can't speak to m2ts files as I don't have any gear that generates them.
One thing you do need to know, however, and this is important. Whether you're running a Mac or a PC, if you're going to work with high def footage such as AVCHD, you're going to need a fairly high performance computer with sufficient RAM, good performing hard drives and a fast CPU.
I tried this on a PC that was fine for my recording studio (audio), fine for professional software development, but choked and stuttered working with HD material. That's not a problem with the Adobe software, it's just the nature of the beast. HD is extremely demanding stuff, so you need top flight gear to work with it. I bought a higher performance PC and now it runs just fine.
Hope this helps,
Chris

Efficient way get FCE4 Log and Transfer to read .mts files stored on drive?

Hi All
I've searched the FCE discussion forum and not found an answer verified by more than one user to this question: What is an efficient way to get FCE4 (via the Log and Transfer window) to see .mts files from an AVCHD camera stored on a drive (NOT via the camera -- directly from the drive)?
I am trying to plan the most space-efficient system possible for storing un-transcoded .mts files from a Panasonic AG-HMC151 on a harddrive so that I can easily ingest them into FCE4. I am shooting a long project and I want to be able to look at .mts files so that I can decide which ones to transcode to AIC for the edit.
Since FCE4 cannot see .mts files unless they have their metadata wrapper the question is really 'how do I most efficiently transfer .mts files from the camera to a storage harddrive with their metadata wrappers so that FCE4 can see them via the log and transfer window?'
Nick Holmes, in a reply in this thread
http://discussions.apple.com/thread.jspa?messageID=10423384&#10423384
gives 2 options: Use the Disk Utility to make a disk image of the whole SD card, or copy the whole contents of the card to a folder. He says he prefers the first option because it makes sure everything on the card is copied.
a) Have other FCE users done this successfully and been able to read the .mts files via Log and Transfer?
In a response to this thread:
http://discussions.apple.com/thread.jspa?messageID=10257620&#10257620
wallybarthman gives a method for getting Log and Transfer to see .mts files that have been stored on a harddrive without their metadata wrappers by using Toast 9 or 10.
b) Have any other FCE4 users used this method? Does it work well?
c) Why is FCE4 unable to see .mts files without their metadata wrappers in the Log and Transfer window? Is it just a matter of writing a few lines of code?
d) Is there an archiving / library app. on the market that would allow one to file / name / tag many .mts clips and view them prior to transcoding into space-hungry AIC files in FCE?
Any/all help would be most gratefully received!

I have saved the complete file structure on DVD as a backup, but have not needed to open them yet. But I will add this. As I understand the options with Toast you are infact converting the video to AIC or something like it. I haven't looked into it myself, but I can't imagine the extra files are that large, but maybe there are significant, I don't know. The transcoded files are huge in comparison to the AVCHD file.
A new player on the scene for AVCHD is Clipwrap 2.0. As I understand this product. It rewraps the AVCHD into a wrapper the Quicktime can open and play. This is with the MTS files only, the rest of the file structure is not needed. The rewrap is much faster that the transcode to AIC. So you have the added benefit of being able to play the files as well as not storing the extra files. The 2.0 version (which is for AVCHD) was just recently released. I haven't tried it and don't personally know of anyone who has. You might want to try this, there is a trial version as I recall.

Import MTS files and burn AVCHD files to DVD on PRE13

Hi am used to PRE 10 and want to know if on PRE 13 I can import MTS files into it, and burn AVCHD just as I am used to. The spec does not mention MTS files and implies burning to Blu ray.

I mean burning to DVD disc

Importing of MTS files in PSE8 causes program crash

I am in Organizer trying to download a video file (MTS) from a memory card. The file shows up for me to select when I do the File > Get Photos & Videos > From Camera or Card Reader. I select it and click done. Then I get the message "Files Successfully Copied" with the message that Organizer will now import the file into the catalog. It asks if I just want to see the catalog entries that were imported. I click Yes. I get a window saying "Getting Media". That window stays up for a few seconds then goes away along with the whole Organizer task.
When I restart Organizer I get a dialog box saying Files Ready for Import. New files have been downloaded and will now be imported. It then asks again if I just want to see catalog entires that were just imported. I say Yes. Again it says Getting Media for a couple of seconds then Organizer again shuts down with no error message.
In order to get out of this "loop" I have to go to the folder where the offending file was downloaded into and delete it. Then when Organizer restarts and tries to again import it, the file isn't there and Organizer displays that in an error message but continues running.
I've reinstalled Photoshop Elements and Premier Elements 8. The file is playable on the camera and other MTS files created around the same time download/import with no problem.
Any suggestions on how to get that MTS file into Organizer?

Because you are working with an AVCHD video file, I suggest that you
-- post your question over on the Adobe Premiere Elements forum because it will have more participants importing AVCHD files to the Organizer. See
http://forums.adobe.com/community/premiere/premiere_elements
-- also you could try initiating the Get Media for that problematic AVCHD video from within Premiere Elements 8: it might be successful. However, even if it is not successful you may get more responses in the Premiere Elements forum when asking questions on initiating the Get Media from Premiere Elements.
Good luck.

Using Adobe Media Encoder CS4 for MTS files

Hey everyone, I did some searching on this topic to no avail so here I am.
Anyway, I recently got an HD camcorder that records in 1080i AVCHD.
I have no problems getting the MTS files off of my camera but as I'm sure you can imagine, working with those files is a whole other issue.
I've found that Adobe Media Encoder CS4 works great in encoding these files to QuickTime format (.mov) but the problem is that the resulting file size is actually bigger than the original MTS file which is unacceptable, especially considering I'm encoding the files from 1920x1080 down to 1280x720.
Does anyone have any experience using AME CS4 to convert MTS files to a more workable 720p format for uploading to YouTube?
I've tried a number of different custom settings to no avail (where you see an "or" is where I've tried different options):
Format: QuickTime
Video Codec: MPEG4-Video or H.264
Quality: 100
Width: 1280
Height: 720
Frame Rate: 29.97 or 23.976
Field Type: Lower First or Upper First or Progressive
Aspect: Square Pixels (1.0)
I won't list the audio options because I don't think that has any bearing on my problem.
Any ideas as to why the encoded file sizes are actually larger than the MTS file sizes? Maybe AME CS4 is not what I should be using for this task?
Thanks for your help,
Tom

I figured it out.
If you select H.264 as the format you can then select YouTube Widescreen HD for the preset.
This will set everything up to convert your MTS file to 720p and reduce the file size by around 30% with little quality degradation in my experience so far.
The only problem I encountered was the video was kind of choppy when the camera panned but that was remedied by upping the frame rate from 24 to 29.97.
Hope this helps someone and if anyone has any suggestions to improve efficiency or reduce file size post it in here.

Encoder keeps crashing with camera MTS files during batch operation

I am trying to convert MTS files to WMV and I am constantly getting crashes.
"Microsoft WIndows: Close programs to prevent information loss... Your computer is low on memory...Adobe Media Encoder.exe"
and
"Adobe Media Encoder Debug Event: Adobe Media Encoder has encountered an error. [..\..\Src\Win\WinFile.cpp-785]"
I do have 8gb of memory with no other programs running and this is 1080/60 converted to 720/30 video and TaskManager shows I have memory to spare.
I have a lot of these and it's neccessary that I do a batch encode. The thing is that I can usualy encode the first item in the list but as the second one begins it crashes.
So it is possible for these files to be encoded successfully (the file plays fine) but the batch process is failing. It is not dependant on the specific file but just any file that isn't the first one in the list it seems.

Physical Memory (MB)
Total: 8173
Cached: 3601
Available: 3693
Free: 1708
Kernel Memory: 297 paged 84 nonpaged
Commit (MB) 6865/9195
(these values fluctuate as i was recording them so they are off a little bit in relation to each other)
I have also set my page file to go from 256mb MIN to 1024mb MAX because I have a SSD for Windows and i wanted to save space. I heard it was not neccessary if you have a lot of ram... I will have 16gb of ram again soon (as i just sent the other 8gb in for replacement). So maybe this could be an issue..?

MTS file playback in CS6

I upgraded to CS6 on my editing machine from CS5. When I import an MTS file into CS6 and play it back on the timeline the playback drops frames and the sync between video and audio lags and drops out. I can do the exact same thing with the exact same clip in CS5 and everything plays back fine. I have the exact same seq settings in both. Playback is through Black Magic video card version 7.5.5 Anyone have a clue what the problem is?

See if this applies to you...
CS6 Bug AVCHD http://forums.adobe.com/thread/1004369?tstart=0
-and http://forums.adobe.com/thread/1004369?start=0

PrE9 mts files in organizer and PrE9

Similar Messages

Maybe you are looking for