PRE9 ? What is max Quality to Burn DVD from 1080i Source????

Dont know if I worded the question properly.
I just bought a Sony HDR-CX350v. It is state of the art HD. I am wondering...? When I look at the quality of my recordings, its awesome. I import to PSE9 and burn to DVD and the quality is significantly less than straight to the camera. So it is recording via AVCHD...and then to PSE9 and then is it being compressed again to play on DVD? I checked all the settings and it doesnt seem to allow to burn at the same quality as I import from camera. Im sorry if this sounds extremely confusing or like I dont know all the variables...I dont. Hopefully I have articulated my situation enough and someone can figure out for me what I am asking. Thanks.

RFMclaughlin3 wrote:
I presume that if I connect the camera to my TV via HDMI (dont have right cable yet) that it will display in full HD.
Correct.
RFMclaughlin3 wrote:
That being the casse, it would seem to me that there must be a way to import files into PRE9, edit, add titles etc and then save to a file without compromising quality of the original HD file? My TV is networked, I must be able to play a file straight to my TV from my PC....? Am I dreaming?
PRE will always rerender a file when creating an output, but you must choose one of the HiDef output formats. Saving to DVD will always (by definition) be StandardDef.
RFMclaughlin3 wrote:
Also, I have tried using PRE9's presets to save the movie for uploading using Flash and MPEG and again the quality is very blurry/marginal. I see great quality videos online, seriously clear productions. How are these done? How can I do the same?
Take a look at John Cloudman recommendations towards the bottom of How can I get the best quality on YouTube? and see if that improves your quality.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Similar Messages

What software is good to burn DVDs from my iMac ?.

What software is good to burn DVDs from my iMac ?.

It's what iDVD is for. If you don't have it:
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

I want to produce wedding dvds.whats the best software to use...final cut x I'm thinking but what about the quality of the dvd?

i want to produce wedding dvds.whats the best software to use...final cut x I'm thinking but what about the quality of the dvd? Can i use idvd?

The only Programms I worked with are DVD Studio Pro and iDVD. You can burn a Video-DVD with Toast but there is no real option to design your Menu. Just a few themes as far as I discovered.
Do you have a Blue Ray Device to burn* the HD-DVD? Are the Bride and Groom able to watch the Blue Ray?
* which is only possible with DVD Studio Pro and not iMovie as far as I know.
This might help
For better quality I would go the Compressor & DVD Studio Pro workflow I just learned.
Export the Movie as is from Final Cut Pro and then use Compressor to encode the File.
Consider delivering the Movie in a different way like a private video on vimeo, a Website or on an SD card which is not really romantic...

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggsts

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggestions on how to overcome the 99 "Chapter limitation" that IPhoto has? Has anyone heard or tried an app called Vilisoft? I read good things but I am not sure if it will do what I want.
Jim

Then use multipel 99 picture slideshows.
You can have up to 8 or 9 slideshows per menu. If you add a sub menu reduce that by 1 and add 8 more to the sub menu. The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows.
However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD. It just becomes a single video/movie file. So you should not have a problem with exporting at the large size, 720 x 540,
and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
OT

Burn dvd from Aperture

burn dvd from Aperture
How do I select photos, projects to burn for a dvd?

Frank's answer tells you hao to export your slideshow movie on a data DVD. But if you want to burn a video DVD that you can play in a DVD player you will need additional software, see Karsten Schlüter's User Tip:
How to create a video-DVD? (Macs without iDVD): Apple Support Communities
Regards
Léonie

How do i burn dvd from iMovie

How do I burn dvd from iMovie. iMac has yesomite installed.

Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

M30x MultiDrive will not burn DVDs from Windows Movie Maker

Hi,
My M30x MultiDrive will not burn DVDs from Windows Movie Maker and other applications.
I have also had problems burning CDs (unbranded) from Windows XP, built in utility.
Does the multidrive have problems, with cheaper brand disks?
Just to note,
The laptop has been back to the support guys three times so far with various issues.
(1) The hard drive failed.
(2) The multidrive failed.
(3) The motherboard got replaced, because of power failures, it wouldnt charge the battery or recognise that the power adapter was plugged in.
Note: The harddisk, not the exhaust fan makes the most noise in mine!
Thanks

Hi
As far as I know the preinstalled burning software (i.e. record now, drag ndrop) disabled the Windows XP burning option. In this case if you want to use the Movie Maker or Windows media player burning option, you should to enable this possibility.
Please go to driver properties (right click). Please select the Recording tab. The option Enable CD recording on this drive should be marked.
I use the Nero burning software and in my opinion its a one of the best burning programs. Furthermore you should try different CD/DVD manufacturers because some CDs and DVDs are not compatible with some drives. Check the TDK CDs and DVDs. I never had any problems with these medias.
Best regards

Can Encore make a Pal DVD from NTSC source?

Can Encore make a Pal DVD from NTSC source?

Convert NTSC <--> PAL http://forums.adobe.com/thread/995779
Regions and NTSC vs PAL http://forums.adobe.com/thread/951042

Video quality of burned DVD way inferior to content viewed in iDVD program

I notice the video and menu quality on my burned DVD is VASTLY inferior to video and menu quality when viewing menus and content in the iDVD program while building the presentation.
Having encoded at "Professional Quality" to a single layer DVD which didn't look so good, a number of posts in this forum suggested that "Best Performance" actually renders the best video quality.
I'm using high-quality media from Verbatim so that's not a problem. The DVD's burn fine.
The content -- all high-quality QT movies with great resolution, color and crisp text and animation, look great in and of themselves, and when viewed in the iDVD program. The menus and clips embedded in the scene select buttons, all look crisp and clean.
Burned to DVD however, the video looks noticeably "worn" and the clips in the buttons lack any kind of crispness or resolution. Definitely disappointing. The animations look herky-jerky.
Anyone know what the problem is?

Hi
No iDVD has a fixed quality - as old time TVs
• PAL 625 lines (720x576)
• NTSC 520 lines (720x480)
so Your Mac screen are way higher resolution.
There are NO HD version of iDVD - yet
*DVD bad quality*
copy of an answer on a similar question - may be of help
the iMovie 08 & 09 don't apply
There are two problems in this question.
• iDVD
• iMovie'08 or 09
iDVD - can only handle Standard definition TV quality - NO version can handle HD !
SD-TV
EU - PAL system = 625 lines analog display (no pixles) 25fps
US - NTSC system = 520 lines and 29.97 fps
That's the best iDVD can do.
iMovie up to version HD 6 - could handle interlaced video (displaying every second line
first then start over with the rest - 25fps = 50 frames of interlaced video
less flickering.
iMovie'08 and 09 has destroyed this by deleting every second line
Result a resolution of
PAL 312 lines
NTSC 260 lines
So photos displayed this way will look crappy.
Improvment
Use iMovie HD 6 or FinalCut Express or Pro
Else only way I know of to get "full" quality is by using other tools all together.
Roxio Toast™ 10 Pro (incl BR-component) and here the included FotoMagico™ for SlideShows.
Toast™ also can burn Blue-Ray - even on standard DVD (but much less eg 20 min movie)
These BR-DVDs Can only be playbacked on a Blue-Ray Player (eg PlayStation 3)
But they look super.
A more specific part reg. FinalCut
I do in FC-Express or Pro
• Export out as a QuickTime .mov file
• Not selfcontained (not important but saves time and spaces)
• NO QUICKTIME CONVERSION (Important)
I use
• Verbatim DVD-R disks
• Burn at a reduced speed x1 or x4 recommended by many)
• Secure a minimum of 25Gb free space on internal boot hard disk for 4x3 SD video
and my guess is that I would secure 5 - 6 times more for 16x9 HD
(Still no version of iDVD can do HD)
Yours Bengt W

Disapointed with picture quality after burning dvd

Hi,
I have iDVD3 and found the little "cheat" so yo could burn to an external DVD writer as I have a LaCie DVD writer. I duly burned my first project but have to say that I am disapointed with the DVD quality compared to DVDs I have burned with TOAST.
I did notice that when burning my DVD on iDVD that it looked as though an error had taken place as a message appeared on screen saying that it couldn't write to the DVD and the tray to teh DVD burner opened however it already had.
Any ideas?

Hi
58 min should put You in the situation of High Quality in iDVD but it
depends greatly how advanced Your DVD-menu is. iDVD can guess that
it is more than 60 min (together) and then put You in best performance.
a. I would downgrade QT to 6.5.2 (Apple support downloads and so on)
b. I don't use - Share to (iDVD, QT or what ever) from within iMovie (if it
is this that You use) but close iMovie, locate project folder/icon and in
this find folder -> Share movie -> iDVD -> use this QT movie in iDVD.
- it doesn't render this way - which harms photos at least)
(And I'm using OS X.3.9 - feel safe with this)
Yours Bengt W

Quality Issues Burning DVD's

I am new to iDVD and iMovie.
I am hoping to be able to burn a DVD that will play on a
standard DVD player hooked up to a TV.
I made a 4 minute movie in iMovie,
then onto iDVD...
Saved movie to HDD
Burned DVDs via disk utility (one at all 3 speeds)
Used high quality DVDs.
The DVDs I created...
only the 4x would play on my standard DVD.
It plays in black and white, not color.
It stops and starts frequently.
Do I have any other options on my Mac?
Should I copy the movie to miniDV and take it to
a company that burns DVD's?
Any advice would be very much appreciated.
I posted this question in the iMovie forum as well...
Thanks in advance,
Kell

What kind of media are you using? Are you using Verbatim or Maxell DVD-R and burning from a disc image at 4x or slower?
Use Roxio Toast or apple's Disc Utilities to lower the burn speed. If your DVD or iMovie has B&W issues where it's not supposed to, then you have a shaky connection / loose cable somewhere. Check all connections (make sure all is snug).

Low quality of burned DVD even if I drag&drop iMovie project into iDVD

Hi all,
I've a iMovie HD project that I want to burn via iDVD (7.0.4).
If I click "Share with iDVD" the quality of the resultung video (which is burned to DVD) is rather poor. As I've read within this discussions, the preferred way is to close iMovie and "drag and drop" the iMovie project into iDVD.
With this way, iDVD (instead of iMovie) will render the movie, which should give a video with far more quality.
Unfortunately, the burned DVD with the "drag and drop" method has the same low quality as the video with "Share with iDVD".
I've done a little research and noticed that the "shared movie" for iDVD (iMovie project->Show package Contents->Shared Movies->iDVD) for a 1:10 video has a filesize of only 32kb!
Is there any way to set the "export" parameters for this "shared movie" (it is a quicktime file)?
The quality of the completed DVD is acceptable if I export the iMovie project to "DV stream" an import this stream into iDVD. But in this case I lose all my chapter markers of the movie ..
Is there any way to export the movie from iMovie HD and keep all the chapter markers for iDVD?
Importing the iMovie HD project into iMovie 08/09 is not an option, as I lose the chapter markers also ..
Thanks in advice,
Kind regards.

Hi,
the iMovie project was created as "DV" project and I imported DV PAL clips. The iDVD preferences are also PAL (25fps) and the quality setting is "professional quality".
I've also tried the setting "best performance" within iDVD (as suggested within this forum), but with the same poor result.
I can see within the iDVD "project info" that iDVD will use "mymovie.mov" within the "Shared Movies->iDVD" of the iMovie project (Show package contents).
As this converted movie is of low quality, I think this is the root of evil.
If I export the movie from iMovie with "Export as DV stream" and import this converted movie into iDVD the quality is ok - but I lose the chapter markers ..
Is there any way to keep the chapter markers?
Kind regards.

Setting quality when burning dvd

Hi, I'm working on my first project on my brand new iMac. Finished creating the 23 minute movie, shared it in iDVD and burned it and found the quality to be quite low. I'll try a better quality dvd, but through reading these posts I've seen mention of settings that relate to the quality of a disk...where would this be in the process? Thanks for the help (and the patience!)

Welcome to the Forum...
Select "Project Info" under "Project" menu item...
Select "Professional Quality" for "Encoding" for the best quality rendering to DVD. The "Best Perf" option is a misnomer...read below for details...
More info from Apple Help file:
+The encoding settings in iDVD are the following:+
◼
+Best Performance+
+When you select Best Performance, iDVD encodes your video in the background as you’re working on your project instead of waiting until you burn it. This can significantly reduce the amount of time it takes to create a finished DVD. This is a good choice if your project is an hour or less in duration (for a single-layer disc). You’ll finish your project more quickly, and the encoding quality will be excellent for the amount of video you have.+
+Best Performance encodes your video at a preset bit rate that produces great quality for projects that can easily fit on your disc. If you have a larger project that needs to be squeezed onto a disc, you should select one of the other encoding options.+
◼
+High Quality+
+This is the best encoding option for larger projects that are between 1 and 2 hours long (for a single-layer disc). With this setting, iDVD chooses the best bit rate possible for the amount of data you need to fit onto your disc. It’s the only option that “squeezes” all the data onto a disc at a bit rate that ensures a high video quality in your burned DVD. Because iDVD does not encode in the background with this option, it takes longer to burn your disc. The encoding process begins when you burn the DVD instead of when you start working on your project.+
◼
+Professional Quality+
+The Professional Quality option uses advanced technology to encode your video, resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about time.+

Burn DVD from video

Somewhat a rookie so go easy on me. I produce a 30 minute TV show in Final Cut Express. I print to video for my media that I give the TV station. I'm often asked to present one of my episodes to a club, etc. A DVD is most convenient for this. I've never had luck printing a good DVD from FCE...I'm sure it's my technique. So, I got the smart idea of using my edited and finished video that I would send to the TV station and use iDVD OneStep (iLife 09) to produce a DVD. Everything seemed to go fine until I put my new DVD in a DVD player...no sound. The image quality is very good and very happy with that...but no sound. What have I done wrong or is iDVD simply not made for this purpose?

Hi
There is a lot to this. Some basic.
DVD - is a standard in it self - CAN only do SD-Video (as old CRT-TVs at it's best)
Neither iDVD, Roxio Toast™ or DVD-Studio Pro - can do anything better.
(Roxio Toast 10 (11) Pro incl BD-component - Can burn to Blu-Ray and even small movies
as this on Standard DVDs - BUT they NEED a Blu-Ray Player to be viewed)
*DVD quality*
1. iDVD 08, 09 & 11 has three levels of qualities. (vers 7.0.1, 7,0.4 & 7.1.1)
iDVD 6 has the two last ones
• Professional Quality *(movies + menus up to 120 min.)* - BEST
• Best Performances *(movies + menus less than 60 min.)* - High quality on final DVD
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) *(movies + menus up to 120 min.)* - slightly lower quality than above
About double on DL DVDs.
2.Video from
• FCE/P - Export out as full quality QuickTime.mov *(not selfcontaining, no conversion)*
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly eg x4 (x1) (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc).
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW)
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a shortlived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-layer.
*Blu-Ray / BD* can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to plyback
The BD-encoded DVDs can be playbacked IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera recorde in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are plabacked by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choise before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
*unclemano wrote*
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround eg EnergySaver
• Don’t let HD spinn down or be turned off (in EnergySave)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screensaver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
Yours Bengt W

What happened to share to a DVD from iMovie?

I upgraded to the latest iMove... CAN NO LONGER SHARE TO A DVD?????? What gives?

It's been removed from the latest iMovie. Actually with the old iMovie one should use the Share ➙ Media Browser option instead of the Share ➙ iDVD option as the latter gives poorer results.
Now one should export out of iMovie at 480p and manually add the move file to the iDVD project.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

PRE9 ? What is max Quality to Burn DVD from 1080i Source????

Similar Messages

Maybe you are looking for