Precal Server installation on App server

Hi All,
Is it advisable to install precal server on the application server ? Also, we are planning to install it on the JAVA server ? Will there be any issues going forward ? Any inputs from your side will be appreciated.

Do not install anything else on your precalc server and especially do NOT install it on your BI server if you run on a Windows platform.
If you don't need Excel workbooks then you can use precalculation without Pre-calculation servesr, using BI Java to send out PD, XML (Excel style) or HTML documents of queries or web templates.
Mostly a basis call . Try to obtain help from them

Similar Messages

Email Enabled lists - where to run the SMTP server? On APP server or on Exchange Server? Or somewhere else?

Hi there,
I need to setup EMail Enabled lists in SharePoint 2010 site. Where do I need to run the SMTP server? On APP server or on Exchange Server? Or somewhere else?
Thank you so much.

The SMTP service cannot run on the Exchange server. You can run it on a SharePoint server, or a stand alone server and share out the drop directory over SMB.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Web Server 6.1 / App Server 7 passthrough

Hi
I having read a couple of posts regarding passthrough functionality between Web Server and App Server - we are still having problems that we hope someone can comment on.
We are running Sun ONE Web Server 6.1 and Sun ONE Application Server 7 (update 2) on the same server with passthrough enabled from the virtual hosts on the web server to the App server. We are using the following obj.conf settings for all our VS web servers but find that when the app server responds with a redirection to index.jsp the Web server does not correctly interpret the context and gives 404 errors. Any advice anyone can proivide would be greatly appreciated.
<Object name="passthrough">
ObjectType fn="force-type" type="magnus-internal/passthrough"
PathCheck fn="deny-existence" path="*/WEB-INF/*"
Service type="magnus-internal/passthrough" fn="service-passthrough" servers="localhost
:81"
Error reason="Bad Gateway" fn="send-error" uri="$docroot/badgateway.html"
</Object>
<Object name="default">
NameTrans fn="assign-name" from="(/*|index.jsp)" name="passthrough"
AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
NameTrans fn="ntrans-j2ee" name="j2ee"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/apps/WebServer/ns-icons" name="es-internal"
NameTrans fn="document-root" root="$docroot"
PathCheck fn="unix-uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index" index-names="admin.jsp,index.html,home.html,index.jsp"
PathCheck fn="set-cache-control" control="no-cache"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service method="(GET|HEAD)" type="magnus-internal/imagemap" fn="imagemap"
Service method="(GET|HEAD)" type="magnus-internal/directory" fn="index-common"
Service method="(GET|HEAD)" type="*~magnus-internal/*" fn="send-file"
Service method="TRACE" fn="service-trace"
Error fn="error-j2ee"
AddLog fn="flex-log" name="access"
</Object>
<Object name="j2ee">
ObjectType fn="force-type" type="text/html,*/*"
Service fn="service-j2ee" method="*"
</Object>
<Object name="cgi">
ObjectType fn="force-type" type="magnus-internal/cgi"
Service fn="send-cgi" user="$user" group="$group" dir="$dir" chroot="$chroot" nice="$nice"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>
<Object name="send-precompressed">
PathCheck fn="find-compressed"
</Object>
<Object name="compress-on-demand">
Output fn="insert-filter" filter="http-compression"
</Object>
thanks!!!

I don't think I explained very well! What I am trying to say is that when the web server receives a response from the App Server (i.e a redirection to /index.jsp) the browser then trys to refer to to this file on the Web Server - where it does'nt exist. I don't know if this is any clearer!

How Web server identify which app server domain it should connect to

Hi All,
I have installed -
application server and created an app server domain HR84DEV.
Web server and created a web server domain peoplesoft
As you all know, to start web server we need to make sure that app server has already been started so as the database server moreover hence, I have first started database instance HR84DEV then started app server domain HR84DEV followed by web server domain peoplesoft
App server knows very well which database instance it should connect to since we mention it on app server configuraiton.
But, How web server domain peoplesoft identifys the app server domain HR84DEV to which it is connected since we nowhere mention the name of app server domain while installing PIA but just JSL/HTTP port and host name.

Connection between webserver and appserver is defined in the configuration.properties file to be found in
\webserv\peoplesoft\applications\peoplesoft\PORTAL.war\WEB-INF\psftdocs\[site]
file contains the entry
# To enable jolt failover and load balancing, provide a list of application server
# domains in the format of; psserver=AppSrvr:JSLport,...
# For example: psserver=SERVER1:9000,SERVER2:9010,SERVER3:9020
## sd="Application Server Connect String", ld="This string embodies the failover and load balancing string for PIA to connect to Application Server domains. Consult the PeopleBooks recommendations on load balancing and failover for more information. The format is psserver=AppSrvr:JSLport where AppSrvr is your fully qualified domain name. Multiple domains should be comma separated", tip="Format: psserver=AppSrvr:JSLport where AppSrvr is your fully qualified domain name, e.g psserver=SERVER1.oracle.com:9000,SERVER2.oracle.com:9010"
psserver=[appservermachine]:[JSL port]
If the webserver cannot connect to your appserver, make sure you can ping the appserver and/or adjust your hosts file to reflect the appserver.

Dreamweaver cs4 come with a web server or web app server ?

dreamweaver cs4 come with a web server or web app server ? Or
can be configured [has menues for] web server local ? When running
a server localhost
http://localhost/... , this can be
run/view a file[in local server] without an internet connection ?
yes without / no needed ?

123polis123 wrote:
> dreamweaver cs4 come with a web server or web app server
? Or can be configured
> [has menues for] web server local ? When running a
server localhost
>
http://localhost/... , this can be
run/view a file[in local server] without an
> internet connection ? yes without / no needed ?
Dreamweaver does not ship with a web server, you have to
install one, or activate one on your system (IIS or Apache for
Widows and Apache for Mac are the common choices). When you define
a site within Dreamweaver you can specify a testing server, as well
as a remote server. If the testing server and/or remote server are
available to your system without an internet connection, then you
can certainly test pages through the web server such as through
http://localhost/
If you are creating HTML pages, then there is no need for a
server at all for creating and testing your pages, but if you are
working with PHP or ColdFusion, then you will need a web server to
work with.
If you have follow up questions, you should ask in the
Dreamweaver General forum (general Dreamweaver usage questions), or
the Application Development forum (questions about dynamically
generated pages), depending on what you're looking to do:
DW General:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=12&catid=189&entercat= y
App Dev:
http://www.adobe.com/cfusion/webforums/forum/categories.cfm?forumid=12&catid=263&entercat= y
Danilo Celic
|
http://blog.extensioneering.com/
| WebAssist Extensioneer
| Adobe Community Expert

WebUtil - File Transfer to File Server instead of App Server of DB

Is it possible to upload a file to server other than the db server or app server?
Thanks.

Hello,
I don't think so. Notice that Webutil allows transfering files only on the App Server machine. With the DB Server, you can only transfert file to/from the database, not the file system.
Francois

Web server connecting to App Server

I want to config Tomcat as Webserver connecting to Sun Enterprise 7 App Server (i.e. access EJB component). How should I configTomcat and Sun Enterprise 7 App Server ?

You should not configure anything special. Just lookup you'r EJBs as you do from any standalone client.

Issue configuring DAD on HTTP Server within 10g App Server

This time with a sensible subject...
I am trying to configure the HTTP Server within 10g Application Server with a DAD pointing to an instance hosted on the same server. However whenever I apply the DAD settings and re-start the server I am told the DAD is down. I have tried many permutations of the connection string all without success. Has anyone else encountered a similar problem and can suggest a resolution. I am carrying out the same steps as I would for a 9i HTTP Server and can only think it is a difference for 10g App Server.

Reviewing the mod_plsql services page, it says 'Module Loaded No'. I have reviewed the httpd.conf and oracle_apache_conf files and both suggest that mod_plsql should be started but this is obviously not the case.

Logging in App Server 7 and App Server 8

Hi,
We have an application (servlets/MDBs/EJBs) running in the Sun Application Server 7 that we want to run on the Sun Application Server 8 (J2EE 1.4.2).
The application has logging facilities with various objects having their own java.util.logging.Logger...
java.util.logging.Logger m_logger = java.util.logging.Logger.getLogger( "ServletLogger" ) ;
m_logger.fine( "How do I get this in the App Server log file?" );
To enable the above logging in App Server 7, I would simply set the global App Server logging level to "FINE" using the admin console. How can I do the same with the App Server 8?
I've tried using the admin console to set the App Server logging levels to "FINE", but they seem to only effect the App Server itself and not the code it is running. I've also tried adding the following properties in the "Logging Levels" page of the admin console...
ServletLogger FINE
ServletLogger.level FINE
.level FINE
but they don't seem to make any difference? Any help will be most appreciated!
Cheers,
Paul

Goto the admin console (port 4848 for default domain).
Click on Topmost Leftmost link -- "Application Server."
choose the "Logging" Tab.
Choose the "Log Levels" tab.
add a new property
com.company.app.applogger FINER and in your code, :-
Logger applogger = Logger.getLogger("com.company.app.applogger "); Now if only I knew how to keep a separate log file for this.

Using 9i reports server on 9i Apps server

I am in the process of migrating from Forms 6i and Reports 6i to running the forms and reports (*.rdf) on an Apps Server. I have managed to get the Forms and its embdeded graphs (*.ogd) working but am getting nowhere with the reports. The old standalone (6i) forms used to have a simple code to do RUN_PRODUCT(REPORTS,<reportfielname>, ... whicg would casue the reports background engine to run on the client and then use the Reports runtime engine.
I have read the documentation on using RUN_REPORT_OBJECT built in but nothing happens .. My Apps Server has a component (created by default?) called Reports Server: rep_AN17001323j. How do I reference that in the Forms Report object code?

Hi,
The problem is indeed that host A is in an other subnet as host B.
When running rwdiag -findAll, you can see which reports servers you can access in your current subnet.
When issuing rwdiag -find <rep> you can try finding the reports server on host B.
After configuring a 2 way reports bridge, I was able to find the reports server on host B
and you should get something like:
Broadcast mechanism used to locate servers
Channel address = 228.5.6.7
Channel port = 14021
'<rep>' found in the network
Time taken - 15 milliseconds
Name = <rep> : null
Thanks for your help!

JAVE UNKNOWN installation Error while installation of App server.

Hello ,
I am using SAPERP2005 IS RETAIL for my Production server. my setup is SOLARIS10 WITH High Availability Scenario
AMDX64 processor i am using for the application server.
DB: MAXDB 7.7.00 BUILD 35.
i am using java 1.4.2_12 version currently. when i started for DI installation on the application server i got the following errors. please help me i am very much greatful to you. It is quite urgent.
bash-3.00# java -version
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
bash-3.00#
ERROR 2007-12-21 13:48:00
CJS-30150 Java processes of instance PIS/D21 [ABAP: ACTIVE, Java: UNKNOWN] did
not reach state PARTRUNNING after 20:00 minutes. Giving up.
ERROR 2007-12-21 13:48:00
FCO-00011 The step start with step key |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instanc
e|ind|ind|ind|ind|10|0|start was executed with status ERROR .
INFO 2007-12-21 14:11:28
An error occured and the user decide to stop.\n Current step "|NW_DI|ind|ind|ind
|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|start".
i cheked the dev_bootstrap log also, please have a look for the below error log
*DEV_BOOTSTRAP LOG*
Error occurred during initialization of VM
Signal chaining not allowed for VM interrupt signal, try -XX:+UseAltSigs.
[Thr 4] JLaunchIAbortJava: abort hook is called
[Thr 4] **********************************************************************
ERROR => The Java VM aborted unexpectedly.
Please see SAP Note 943602 , section 'Java VM crashes'
for additional information and trouble shooting.
[Thr 4] SigISetIgnoreAction : SIG_IGN for signal 18
[Thr 4] JLaunchCloseProgram: good bye (exitcode = -2)
I am waiting for your reply,
Regards,
Sankaranarayanan.G
BASIS CONSULTANT

Hi Sankar
Error indicates memory problem.
1. go to configtool and change the values for > server0 > Max heap size = 2048 MB.
-xx:NewSize=320m
-xx:MaxNewSize=320m
-xms2048m
-xx:PermSize=256m
-xx:MaxPermSize=256m
Please check the note 723909 for any further clarification.
Exclusively for Sun Solaris
Check the following:
1050866 : Java VM terminates under Sun Solaris 5.10 during install.
1048824: JLaunch may fail to start the Java VM during installation
Hope this helps
Cheers !!!
Satish Kumar.

Mail Server Installation on xMII Server

Hi All,
I had installed mail server on xMII Server and created a mail account there.
Inside the BLS I used localhost as server.
And username and password, I given the credentials of mail account created.
The problem is I am not able to send mails(Even I tried running it by creating an XacuteQuery). Please let me know if there is anyother setting that needs to be done from xMII side or from mail server side, so that I can send mails mentioning Server as localhost instead of stating entire IP.
Thanks & Regards,
Ravi kumar

Hi Ravi,
Do you want to send mail from xMII to your mail?
No need to give mail Account and password.Only you give your mail server name , From and To.
Mail server name should be correct.
And other fields like subject and attachment as per your requirement.
Thanks,
Manisha

Migrating from 10.4.11 Server to Mavericks (App) Server

Hello All!
We have recently purchased a new Mac Mini 2.3GHz quad-core i7 with OS Server, in the hope of replacing our current G5 X-Serve running 10.4.11.
I would like it to be known that I am not a server administrative wizard, but am aware that the migration from 10.4.11 to an Intel-based system is not as pleasant as I had imagined.
Our G5 hosts our Mail database (Cyrus IMAP) - and this is my primary concern. I have read that the new Mail service differs hugely from Cryus (Dovecot - if Im not mistaken?). We rely hugely on archive mail for legal reasons and losing it is not an option. I will of course have Carbon Copy Cloned the X Serve before carrying out any migration, and certainly intend to leave the old hog alone if I need to revert to it at a later stage.
The only documentation I can find is the Apple Technical document which outlines how to migrate from 10.4.11 to Snow Leopard Server 10.6 - this is an issue for me, since I have Mavericks now installed on the Mac Mini and "reverting" back to an older OS is rather difficult (especially with no superdrive).
Could anybody please point me in the right direction? Is it likely that I will need to downgrade the Mini's OS first? Or have Apple already produced literature which can guide me through this process?
Help!

Migration Assistant will not overwrite the OS or replace newer versions of applications with older ones. It is designed to do what you presumably want to do: make the transition from the older to newer Mac(s) as smooth as possible.
One thing: if it is convenient to do so, I suggest you connect each old & new Mac by Firewire, with the older one in Firewire Target Disk Mode, to do the Migration. This will be the fastest way to do the migration.

App Server Fails to Start after Installation

Hi,
I've spent a whole day struggling with this, looking through forum discussions and trying out every single suggestion I've come across in the forums. I'm running out of ideas now and really appreciate any help I can get with this problem.
I'm trying to install SJSC2 (also tried with SJSC2u1 with the same outcome) on a new HP notebook (nw9440) running WinXP_sp2. I'm using the default installation done by HP.
My installation path is C:\Java\SunCreator2 (C:\Java\SunCreator2_1 for update 1).
After the installation the App server fails to start up and gives the below error in the server.log.
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d779c9d, pid=5368, tid=5760
# Java VM: Java HotSpot(TM) Client VM (1.5.0_06-b05 mixed mode)
# Problematic frame:
# V [jvm.dll+0x99c9d]
# An error report file with more information is saved as hs_err_pid5368.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
Upon looking at the install.log in the rave_home directory, I noticed the below sequence of errors.
Timeout waiting for domain creator to go to starting state.
Compiler warnings:
line 44: Attribute 'debug-options' outside of element.
line 62: Attribute 'port' outside of element.
line 73: Attribute 'port' outside of element.
line 84: Attribute 'port' outside of element.
line 105: Attribute 'port' outside of element.
line 116: Attribute 'port' outside of element.
line 127: Attribute 'port' outside of element.
line 145: Attribute 'port' outside of element.
line 156: Attribute 'port' outside of element.
CLI156 Could not start the domain creator.
The following script has unexpected output: "C:\Creator2\bin\deploy-ws.bat"
Aug 14, 2006 11:27:33 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:35 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:37 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
The following script has unexpected output: "C:\Creator2\bin\deploy-ejbs.bat"
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI137 Command create-jdbc-connection-pool failed.
CLI137 Command create-jdbc-resource failed.
CLI137 Command create-jdbc-connection-pool failed.
CLI137 Command create-jdbc-resource failed.
Aug 14, 2006 11:27:52 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:53 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:55 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
Aug 14, 2006 11:27:57 PM com.sun.appserv.management.client.ProxyFactory getInstance
SEVERE: ProxyFactory.getInstance: Failure trying to create a new ProxyFactory: java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.
CLI171 Command deploy failed : Deployment of application failed - java.io.IOException: Unable to connect to admin-server. Please check if the server is up and running and that the host and port provided are correct.; requested operation cannot be completed
I've tried every workaround I've seen in the forums such as installing under different paths (both with spaces and without spaces), cleaning all the temporary files in the Temp directory, renaming the productregistry in the windows system directory. Each time I get the exact same error in the install.log.
I also tried installing the stand alone SUN App Server 8.1_02_2005Q2 as well as 8.2. I don't seem to have any issue with this installation or running of the stand alone server at all on the same machine.
Really appreciate any help I can get. TIA....
rgds,
KC

Hi,
After spending more time looking through the forum, I came across the below thread which has worked in my case (though it was suggested for Sol10x86).
http://forum.sun.com/jive/thread.jspa?threadID=62404&messageID=243113
This is the workaround that worked in my case.
> $ cd <Creator_Home>/SunAppServer8/lib
$ mv processLauncher.xml processLauncher.xml.trayIcon
$ cp processLauncher.xml.bak processLauncher.xml
# If you have a domains/creator/config/domain.xml
$ cd ../bin
$ ./asadmin start-domain creator
This started the app server. After that I was able to start and stop app server within the JSC as well.
Only difference between these two xml files seem to be,
processLauncher.xml.trayicon
<main_class classname="com.sun.rave.tray.RavePEMain"/>
processLauncher.xml
<main_class classname="com.sun.enterprise.server.PEMain"/>
Possibly pointing to a bug in the "com.sun.rave.tray.RavePEMain" class.
Thanks for your suggestions guys... and especially to Marco and Greg.
Rgds,
Kc
Message was edited by:
Kc

Separate Apps ... Separate App Server Installations?

We are purchasing Oracle App Server. Can 2 separate applications utililize a single installation of App Server? If not, can the separate installations either be on 2 separate physical servers or 2 virtual servers?
Thanks

Thanks for your response - I'll try to be more clear.
We have 2 applications - App A and App B. Each uses Oracle Application Server (OAS) AKA Internet Application Server (IAS). We have Server1 with OAS/IAS installed on it. Can App A and App B each use the OAS/IAS installation on Server1 or does App A need to run on Server1 and App B on Server2?

Precal Server installation on App server

Similar Messages

Maybe you are looking for