Precalculated Value Set - Query Designer - information Broadcasting NW2004

Hi Buddies,
Needs your help!
i have question regarding to the precalculated Value set distribution type for infomation Broadcasting NW2004.
According to my understanding, firstly i created a broadCasting setting Z_Test based on Query1 to calculated the value Set, for example , for company code.
And then in the Query Designer, New a Query2 which contains a Variable type precalculated value set and its default value point to the broadcasting setting created before.
but when i check the query, it present an error message : 'Default value for Variable 'PM_Comp' are not within permitted value range'.
could anyone can help me out with it?
Thanks a lot!!
B.R
Vivi

Hi,
I am also getting the same error. Have you got any solution ??
Regards,
Sheetal

Similar Messages

Using Precalculated Value Set Characteristic in Query defined on an Infoset

Hi,
I am using a Precalculated Value set for a chracteristic in a Query defined on an Infoset. It shows direct read in SM50 . However I cannot see any SQL statement for the Query through RSRT or ST04 EXplain.
Thanks For your help in Advance..
Kind Regards

Hi..
Is it possible to use a Precalculated Value Set Characteristic Variable in a Query defined on an Infoset?
Thanks
Kind Regards
Anil

Reporting Agent: Precalculated Value Set

Hi everybody,
After schedule package to get precalculated value set has finished, I need to know generated values...do you know what table stores that results?...
The job doesn't generate any spool, just an execution log!
any help is appreciated!
kind regards
Message was edited by:
CESAR BENITO

Hi,
You can use the TCODE REPORTING_AGENT in Bi7 to use reporting agent. But Reporting agent works only for 3.x queries it wont work for 7.0 queries. To precalculate or precache you can use information broadcasting in BI 7.0
Regards,
Raghavendra.

Precalculated value set in process chanin

Hi all,
Can anyone tell me wat is precalculated value set in process chains.
Regards,
Khaja.C

Hi
Pre calculated value sets are used for reporting purposes. They will act as inputs to queries where variables are used.
The values maintained in the value set will be substituted in place of variables in the query at runtime and the query output will be generated. This is done in process chain for automation purposes. Usually they are used in conjunction with BEx broadcaster.
With Regards

Precalculated value set through broad casting

Hi
If i schedule precalculated value set option in broad casting, if i schedule broad casting. wher can i cross check, its compelted and values are ready?

Hi
iam not sure where we can check whether in the tables or in the Process chain itself.
But I have got some info on Broad Casting
Please find the Links below
/people/sap.user72/blog/2005/12/23/summary-of-new-features-for-information-broadcasting-in-sap-netweaver-2004s
/people/community.user/blog/2006/12/28/exception-broadcasting-in-sap-netweaver-2004s
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/296edc90-0201-0010-7982-c6dc0b288296
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00d91245-1f5d-2a10-c795-8394960f56cc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b485d390-0201-0010-8189-91444c74c69f
Hope this will help you
Many thanks
Kiran

Precalculated Value Set

Hi,
I am trying to do the setting for Precalculated Value Set....I have a Query with variables...But the problem is I am not able to see the characterisitic in the left window of Reporting Agent(Value Sets)....Any help is appreciated......

Shreya
I am not sure why it's not showing up but you could create your own characteristics by clicking create new settings button and assign reporting agent.
Thnaks
Sat

Dump when trying to display characteristic values in QUERY DESIGNER

Hi Experts,
Life seems to become a struggle with 7.0 for me :-(.
My current problem:
If I try to display characteristic values in Query Designer (left section of screnn, wthin dimensions) system dumps frequently.
It's that kind of dump, that doen't help really (to my oponion)_
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program
     'CL_RSBOLAP_BICS_SERVICES======CP' has to be
    terminated.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_RSR_X_MESSAGE"
    "CL_RSBOLAP_BICS_SERVICES======CP" or "CL_RSBOLAP_BICS_SERVICES======CM003"
    "HANDLE_UNCAUGHT_EXCEPTION"
... etc.
BW 79, SP21
GUI 7100.4.14.3136
Any ideas?
Thanks in Advance and Regards
Joe

Hi Vikram,
Thanks for reply. Reinstalling GUI was successful, but - error still occurs. ..
Regards
Joe
Edited by: J.F.B. on May 28, 2010 3:02 PM

Adding column values in query designer

Hi,
I have requirement to add value in query designer the values should look like this
Column A     Column B
10                    10
20                    30
30                    60
40                    100
the first values of column B will be same as Column A 10. The second value of column B = column A 1st value +Column A second value similarly Third value of column B = 1st + 2nd + 3rd values of column a. So on and so forth
Any help will be highly appriciated.
Regards,
ray

Hi
Just create the formula and go to the properties of that formula and go to the calculattion tab and in the "CALCULATE SINGLE VALUE AS " select the option the additive ( not sure but once check that will perform additive operation plz once check it) and select the cumulative check box.
I think u can get it , because in one of my project i did that calculation.
Hope u got it,
Thanx & Regards,
RaviChandra

Diff between Precalculated Value set and Precalculated web template

Hi Friends
Can any one tell the Diff between Precalculated Value set and Precalculated web template
Where we will use these
Thanks

Hi,
The Reporting Agent is a tool used to schedule reporting functions in the background.
The following functions are available:
●      Evaluating exceptions
●      Printing queries
●      Pre-calculating Web templates
●      Pre-calculating characteristic variables of type pre-calculated value sets
●      Pre-calculation of queries for Crystal reports
go through,
pre-calculated value sets
[http://help.sap.com/saphelp_nw04s/helpdata/en/28/734d3caa70ea6fe10000000a114084/frameset.htm]
[http://help.sap.com/saphelp_nw04/helpdata/en/84/00783b3af21f5ee10000000a11402f/content.htm]
Pre calculating Web template:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9e/9f653ade969f4de10000000a114084/frameset.htm
Basically when you have a Precalculated Template, the system first run a report (which has been scheduled) and read the data from there when you run your template. This can imrpove the performance respect to online read data.
[http://help.sap.com/saphelp_nw04s/helpdata/en/6e/b5663a5fb46752e10000000a11402f/frameset.htm]
[Pre calculated web template;
Hope this helps...

Hide a row or column for characteristic value # in Query Designer

Hi gurus,
I would if we could hide a result row / column if one of the characteristic value is #. The requirement is actually to remove the meaningless row / column from the whole result set. For example, I have a char Material Group in the column. Since not every Material is assigned to a Material Group, I will get the following layout:
Material_Group A
Material_Group B
Material_Group C
Is it possible to define in query designer so that the column with # will automatically not be displayed?
Thanks,
Meng

Hi Meng,
I guess we have the same users..
But there is one thing that is going to make a non sense on the report: if you do not display the "#" for material group, then the total of your query by material group will not be the summation of what is displayed on the screen...and if the user explort the information in Excel (pretty sure they will do so), you will have some calls that your query does not balance....
Based on that assumption, tell the users to assign a material group to the materials, so that this unassigned column disappears. You could even give them a control report listing all the parts that do not have a material group
If this is a standard business rule not to have a material group for all parts, then, what you could do is to change the text for empty rows for Material group, then the "#" will disappear and wil be under the text description you defined.
But keep in mind that your data is made of materials which do not have a material group in their definition, noraml or not ?
PY

Error when executing a Query through information Broadcasting

Dear SDN,
We have configured information Broadcasting in the Web Reports---
Scheduled and then when executing the following error is coming
500 internal server error - Microsoft internet explorer
Error when processing your request
What has happened?
The URL http://xyz.com:8000/sap/bw/BEx was not called due to an error.
Note
The following error text was processed in the system BWD : Please enter a valid value for characteristic 0CALMONTH.
The error occurred on the application server asalbwd_BWD_00 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
START-OF-SELECTION of program RSRD_BROADCAST_PROCESSOR
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system BWD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server asalbwd_BWD_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server asalbwd_BWD_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http-c:900-u:VENKAT -l:E-s:BWD-i:asalbwd_BWD_00 -w:0-d:20080708-t:133744-v: ERROR_MESSAGE_STATE-e:Please enter a valid value for characteristic 0CALMONTH.
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please suggest us to resolve this error..
Help will be greatly appreciated with points..
Thanks in advance

Hi
Thanks...
I have given only Fiscal Year/Period Variable
Other than Fiscal Year/Period Variable....No Variables in that Query..
In FI Queries, I did not use 0CALMONTH Variable...
I do not know why it is giving that error..
Please suggest us to resolve this error..
Thanks in advance

Is Precalculation server a prerequisite for Information broadcasting

Hello Everybody,
I wanted to know is installation and configuration of pecalculation server a prerequisite for enabling Information broadcasting feature in BW 3.5 i.e; inorder to send emails to users .I mean inorder to send mails to users is it necessary to install pecalculation server first.
Regards,
Saumya

The Precalculation server is only needed if you want to distribute workbooks. In order to distribute workbooks, the BW needs access to a computer with Excel on it. The precacluation server service software can be installed on a standard desktop PC. It can be installed on mutliple desktops, or you can consider a centralized server, but for initial testing, a desktop will do. There are a number of OSS Notes to apply, several from SP 17 that deal with problems occuring as a result trying to distribute multiple wkbks simultaneoulsy.
You do NOT need it to distribute either query links or html formatted output.
You also need an IGS server if you want to be able to send your output in a zip file format.
Don't have the link handy, but try searching SDN on Precacluation Server - there is a good paper (think it was a How To...) that was just written in April on troubleshooting Precalculation Server issues.

All Dates displayed for "Characteristic Values" in Query Designer

Hello Experts,
We are on BI 7.0, level 13. I am having an issue within the Query Designer with regards to dates. I have a write-optimized DSO that contains 3 date fields (for example, ZDATE1, ZDATE2, and ZDATE3). Each date InfoObject is of type DATS so the system automatically creates it with reference to 0DATE.
When I create a query in the Query Designer, on the left hand side, I expand the "Characteristic Values" node under each date field. The Query Designer shows the same list of values for each of the 3 dates even though they are not valid values posted in the DSO for those fields.
For example, ZDATE1 only has 1 value posted in the DSO (01/01/2005).
ZDATE2 only has 1 value posted in the DSO (01/01/2006).
ZDATE3 only has 1 value posted in the DSO (01/01/2007).
Bute when I expand the "Characteristic Values" node in the Query Designer, I see ALL THREE values under each date field. I would expect to only see the 1 value posted for the InfoObject in the DSO. Also note that each InfoObject is defined to show "Only posted values in InfoProvider".
It appears that Query Designer will show all values for the reference InfoObject 0DATE instead of the ones posted to the actual InfoObject in the DSO. If I delete the data in the DSO, the Characteristic Values list still remains because they exist in 0DATE. Anyone encounter this before? How can I get the Characteristic Values list to only show posted values for that InfObject?
Thanks for your help!
J

Thanks for the response. I went into the DSO and right clicked on each of the Date fields. I looked at the Provider-specific properties and there is the option for "Query Exec.FilterVal" which only restricts what values appear when restricting during execution, not during query creation.
Is there someplace else I should look or someplace else I can make change to only display posted dates when creating a query? Thanks!

Value for a characteristic changed with an other value in Query Design

I want to change the value for a characteristic (Type) in Query Design (not the description, the value).
In my cube I have these values:
Customer *** Type
22222********SmallCorp
22223********SmallCorp
22224********MedCorp
The report should like:
Customer *** Type
22222********LEGALENTITIES
22223********LEGALENTITIES
22224********LEGALENTITIES
Or only the "SmallCorp" value should be changed in LEGALENTITIES.
How to do that?
Thanks,
Dragos

You can write an exit to replace Type SmallCorp to LEGALENTITIES.
But this will reflect in other queries too....
Or If change in modelling is still an option, you can add one more Type 2 in the cube and update in the transformation with Constant = LEGALENTITIES. Use the Type 2 in the queries.

Filter certain InfoObject values in Query Designer

Hi
I've the following scenario:
- InfoObject 0ACCOUNT contains some account numbers with prefix 'XYZ' followed by a number, e.g. 'XYZ12345'
- These values may never be shown to the analysts, i.e. I need to filter (remove) them in the characteristic restrictions of the Query Designer
How can I do that? Hard-coding all these values makes no sense as new account numbers could be created anytime.
I think the only solution is using a customer exit or does someone have another idea?
Thank you for you help
Patrick

Hi Patrick,
Exclusion with multiple values generally hampers query performance, so better I would suggest you to include required values in filter if that is feasible (As I know there is some limit on number of filter value inclusion also).
You can simply create a customer exit variable on 0ACCOUNT, select all the master data values of 0account in internal table and then delete the values starting with 'XYZ'.
DELETE i_t_account where 0account CP 'XYZ'.
after that you need to populate all these values in variable. I would suggest you to do this operation in I_STEP = 2, otherwise if you do it in step 1 then it might take some time for user to see the selection screen.
Regards,
Durgesh.

Precalculated Value Set - Query Designer - information Broadcasting NW2004

Similar Messages

Maybe you are looking for