Precaution(for POSDM) before upgrade BW, current Ver. of POSDM is 7.01 target is 7.01 SP1

Hi Team,
Please let us know the precaution and things that we need to take care before upgrading the POSDM from:
Current7.01 Version
New Version-7.01 SP1
I would appreciate if some one can provide the check list ASAP.
For information we are using the below scenario in POSDM:
1.We are using on WPUBON idocs and sending the same to ECC
CAN someone reply on this.
Thanks
Message was edited by: nishant gupta

Hello,
What is this component ?
3WETN492 Required Add-On component "POASBC" rel."100_730" is not installed
Thanks

Similar Messages

I cannot connect after upgrading Firefox. I work in corporate environment and cannot change security settings. Why this feature was not tested before upgrading to current version?

I cannot connect to ANY web sites (for example, yahoo, google, etc.

[https://support.mozilla.org/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading Firefox]
see also [https://support.mozilla.org/en-US/kb/Firewalls Firewalls]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Bug in Inventory Audit Report before upgradation from SAP B1 2004B to 2005B

Sir,
We upgraded SAP Business One 2004B to SAP Business One 2005B on 26/05/2007. Earlier we were having SAP B1 2004 in which therer was no Inventory Audit Report function in Inventory Reports. After upgradation if we take Inventory Audit Report, the closing quantity of the stock is shown is correct but the value for negative stock quantity is wrong for period before upgradation i.e.upto 26/05/2007. The difference is exactly double of the stock value of that item. The closing quantity and value is OK if we run the report for the period after upgradation i.e. from 27/05/2007 to till date.
For e.g.
If we make A.P.Credit Memo for an item qty.20 value INR 20,000/- based on A.P.Invoice and take Inventory Audit Report, the qty.is posted as -20 but the value is posted as INR 20,000/- but actually it should be INR -20,000/-. That is the value is taken twice of the original value.
Reagrds,
Vishal Takte

Hi Vishal,
Please contact SAP Support for your problem; I think they should be able to help you to fix the problem.
Sorry for any inconvenience,
Frank
PS: Please note that such "application-related" questions fit best into the "SAP Business One" Forum...
Message was edited by:
Frank Moebius

What do i need to do with my current iPhoto before upgrading to iPhoto 11? i don't want to lose any of my photos!

i'm getting ready to upgrade to iphoto 11 so i can use photostream. I just don't want to lose my current photos.

Welcome to Apple Support Communities
When you open iPhoto '11 for the first time, your library will be upgraded in order to be used with iPhoto '11. If this process doesn't finish correctly, you will lose all your photos.
Because of that, the only thing you have to do is to make a backup of your iPhoto library before upgrading. Just open a Finder window, go to the folder where your iPhoto library is (normally, Pictures) and make a copy of it in another folder or drive. With this, you can upgrade safely to iPhoto '11

Upgraded to ios 5, now my voice mail is asking for a password or code to unlock to get voice mail. Didn't have a passcode before upgrade, so how do I reset the passcode?

upgraded to ios 5, now my voice mail is asking for a password or code to unlock to get voice mail. Didn't have a passcode before upgrade, so how do I reset the passcode?

So now I went back to the screen that orginally asked me for my Apple ID and passort, and instead of entering my Apple ID i entered the email address associated with it and the new password. It now tells me "You can't sign in because your account was disabled for security reasons. To enable your account, reset your passwort at iforgot.apple.com"
I have now changed my password twice and it still doesn't work.
Until I get this resolved my tablet is useless.

Test scripts for queries before and after upgrade (bi7.0)

HI,
i need to create a documnet for testing the over all functionality of the queries and wad before upgradation and after upgradation(bi 7.0) like structure, rkf , ckf variables, etc , please guide me and send me if any sample template available on this scenario
Thanks in advance
narasim

You can spool (or put in a database table) in your 10G database the sql statements and their performance metadata (this should be done when the system is really used). After the upgrade you can do the same select as used to spool. the statements in the 10G database and compare them (again in a really used system). A sql statement to use could be:
select inst_id, sql_id, hash_value, executions
,(cpu_time/executions)/1000000 cpu_time
,(elapsed_time/executions)/1000000 elapsed_time
,(disk_reads/executions) disk_reads
,(buffer_gets/executions) buffer_gets
,(rows_processed/executions) rows_processed
from gv$sqlarea
where executions>0
order by inst_id, sql_id, hash_value
Regards, Gerwin

I currently have OSX 10.4.11 and need to upgrade my software. I do not have Time Machine yet. My processor is an intel Core 2 duo. Do I have to upgrade to snow leopard 10.6.8 before upgrading to Mavericks?

I currently have OSX 10.4.11 and need to upgrade my software. I do not have Time Machine yet. My processor is an intel Core 2 duo. Do I have to upgrade to snow leopard 10.6.8 before upgrading to Mavericks?

Assuming your computer has the minimum system requirements yes, upgrade to 10.6.8 and then open the Mac App Store and upgrade to Mavericks. You can only get SL 10.6.x from Apple's online store, it is $20. Prior to upgrading to 10.6.x get an external HD and use a utility such as Carbon Copy Cloner or SuperDuper and make a bootable clone of your system to safeguard all of your valuable data. In the event you have a problem the backup will be invaluable!!!!!
Considering your computer is at best a 2007 iMac I would STRONGLY recommend upgrading your RAM to 6GB, the maximum a 2007 machine can accommodate. You can buy this from either Crucial or OWC (www.macsales.com).
Another option is due to the age of your computer is considering buying a newer machine.

Yosemite mail v8.0 not showing how many messages are in a mailbox. For example inbox. Before upgrading it used to show how many messages you had in your inbox. anyone know how to switch "on" the number of messages?

Yosemite mail v8.0 not showing how many messages are in a mailbox. For example inbox. Before upgrading it used to show how many messages you had in your inbox. anyone know how to switch "on" the number of messages? Or has this feature been removed?

Agreed! This feature was very useful. If you find out how to turn it on, please let me know.
Apple, there is plenty of room in the window header all the way across on both sides of the word "Inbox". It's important to know many messages are in the Inbox. It provides a progress meter when you're cleaning out mail and striving for inbox zero.

Apple automatically charged me for an iCloud upgrade on a device I do not own anymore or know of the current owner. Even though I deleted the device from my account I was still charged for a device I do not have anymore

Apple automatically charged me for an iCloud upgrade on a device I do not own anymore or know of the current owner. Even though I deleted the device from my account I was still charged for a device I do not have anymore. It's very difficult to get to talk to anyone from support. How can I be refunded?

Yes, assuming they are currently on the computer.
If the iPhone has been used as designed, contacts are either in a supported application on the computer or are synced to a cloud service.
Pictures would be copied to the comptuer regularly and then those desired to be on the device would be synced back.

HT1222 10.6.3 everytime I try to upgrade to this ver. it stops at the end because it can't find the folder containing the information package "itunes.msi" I have did a search for msi with no luck in finding it. has anyone have this problem with a soluti

eerytime I try to upgrade to this ver. it stops at the end because it cant find the folder containing the missing "itunes.msi" has anyone else experienced this and is there a solution. help. Using XP service pack 3

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

What precautions should I take before upgrading to iDVD 06 (and iLife 06)?

I have read a few people's experiences on this site about problems encountered after upgrading to iLife 06. I am about to do this and wondered what how I should go about backing up my iDVD and iMovie 5 half-completed projects in case they don't work properly in version 6.
Will a half-completed iDVD 05 project seemlessly covert to iDvd 6 after installation or should I complete it in 5 before upgrading? If I should go ahead and upgrade, in case there are problems, how do I back up my projects in case I need to reinstall iLife 5 to work on them again?
Thanks in advance

Also, I forgot to mention, I had read that not all the themes that are accessible in iDvd 5 are accessible in iDvd 6 - is this true? If so, what happens if I have used one in my half-completed projects?

Upgraded to current iMovie but don't see videos from previous version

Hi
I have an iMac 27" mid 2011, and decided to upgrade yesterday to Yosemite 10.10. The upgrade went fine, but then discovered that iMovie would not work, so i had to run the update for iMovie which is currently 10.0.06. I have discovered that I cannot see any of my previous files from the previous version of iMovie that I created.
I upgraded my mac book pro to Yosemite and that has gone fine and when I upgraded iMovie it has imported all the previous files to the new version.
I did back up both the iMac and the macbook pro before upgrading both machines to my timemachine.
Any ideas as to what the problem is would be greatly appreciated as I don't want to lose my videos.
Many thanks
Belumira

i dont think so as i'm suing same ios ver 5.1 on both iph 4 and 4s. one strange thing is when i use another iphone 4 to restore from icloud, after keyed in my apple id and pw, i can see latest back which i did on my old iphone 4. can this be ph specific problem which i dont think so?
one more question, on my new iphone 4s (after setting up as an new ph but using same apple id) when i go into icloud manage storage, i can see both this phone backup that is only about 20MB and my previous icloud backup that is about 290MB, i can only see as "delete backup" , how can i restore this ? this is what i seriously need to restore. thanks!

-23045 AuthNameErr in Mac Manger for OS9 after upgrading to 10.4

Hello all. We have recently upgraded our G4 based Xserve from 10.3 to 10.4 Server. In the process because of several network changes done over this holiday season I also had to change the IP address of this server from 10.0.16.45 to 10.1.12.230. At that time I also changed the DNS records to point to the new IP Addy.
Since then when a user logs into a OS9 Client machine they are able to login with their password properly however they are give the error code "-23045 Unknown Error" and told that their home directories cannot be mounted. They can then either say yes and go into the machine anyways without their personal settings or say no and go back to the login screen. Now our server has dual Copper NICs and a 1000SX Fiber card as well. For years we used the Fiber card with the IP 10.0.16.45, but with the addition of Link Agg to 10.4 I now have them all in use. The Fiber card kept its original IP address, but I added the new IP (10.1.12.230) to the Link Agg.
All of our DNS records point to the Link Agg (10.1.12.230) currently. I was hoping to do a way with the old IP all together, but when we found this issue I reenabled it.
I have done some net research and in the process have found that most posts say this error has something to do with DNS in a lot of cases. I did change our DNS records when I made the change to the server. I even added PTR records as noted in Apple Mac Manger Mailing list, but still no luck. In our setup I do not use LDAP AFP mount points for home directories. In Workgroup Manager everyones home dir is just /home/teacher which worked fine before. We currently haven't evolved up yet:>
In my testing I have found that if I do change a user over to use an AFP point instead of the vanilla way they do in fact work and login, but its horribly slow! I went into the Share section of Workgroup Manager and checked off /home/teacher to be and LDAP AFP mount point. I then changed a user to have their home dir there then instead of the old way. I could login and everything appear to work. However the wait time on login and logout was longer then usual. We do have the MMLocalPrefs Extension enabled so we do expect some login delay, but it is sooo much worse in this configuration. I tested out general AFP share point directly
through the chooser on nonMM machines, Windows Filesharing, FTP access, and also Server to Server transfers (we also have a newer G5 Xserve I put 10.4 on as well which has the dual Link Agg.) In all of those cases File Transfer was very very fast.
One more weird thing I noted. I thought maybe now that I made changes something could be up with MM itself. I logged in as SysAccess and then launched the Mac Manger Admin piece. I was looking at our Student group who mounts up a directory at login which is where we keep Reading Counts. Now when I was looking at the volumes section it says "MSE on 10.0.16.45" which was the old IP. I removed it from the list and saved. Swapping back to the chooser real quick I mounted MSE manually using the new IP 10.1.12.230. I went back into the MM client and moved MSE back over to the right pane for mount on login. Again it said "MSE on 10.0.16.45" Still the old IP even though I used the new IP to mount it. I tried this test a bunch of different ways trying to force the mount as being on 10.1.12.230 but was never successful. This test sorta tells me that for some reason something in MM is holding on to the old IP. If thats so that makes sense why the error code would be saying the name isn't right.
I read another post on the above mentioned list where someone mentioned that they formatted their clients and this problem went away. Though I don't want to this I kinda wonder if theres some sort of On Client cache of MM info or maybe even a file in my users own personal perfs which is causing this issue. If so what would be the proper way to go about working that issue out.
So above is what all I know. I want to run some new tests Tuesday to try to track this issue down further, but in the mean time I figured it wouldn't hurt to post here so that maybe someone with Experience in old school Mac Management may know the answer or have better suggestions:> Thanks.
-Jesse C. Smillie
Gateway School District
Monroeville, PA
Xserve G4 and an Xserve G5 Mac OS X (10.4.3)

I called Apple Educational support and more or less they told me that the way I was doing home dirs isn't possible anymore in 10.4. So I changed over to AFP LDAP points and its working now. Still a tad bit slow, but thats a question for another post.h
-Jesse

Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. How can I retrieve my photos without buying iPhoto?

Before upgrading my system from Snow Leopard to Mountain Lion I had taken a backup of iPhoto library in my external drive. But now when I try to open that package, I'm directed to app store to buy new iPhoto. Why would apple install iPhoto by default with Snow Leapord and make us import all our photos in it at the first place, and now ask for money if we want to retrieve our photos back on mountain lion? What if they make contacts a paid app with the next OS upgrade, and then bully us to pay money if we want our contacts? This is something very dissappointing on Apple's part. I need answers here.

I fail to remember if the installer gave me an option to keep my applications.
The Mountain Lion installer will not delete applications. It will only mark applications, that are not compatible with your current system with a "forbidden" sign in the icon. And you cannot launch them.
Does your iPhoto icon in the Applications folder look like this?
Then your iPhoto version is incompatible and cannot run with Mt. Lion. If it is iPhoto '11, with a versionnumber starting with 9.x.x., you can upgrade it by downloading a newer version from the Apple downloads site http://support.apple.com/kb/DL1650.
But if you have 8.x.x, you need to buy an upgrade.
Regards
Léonie

I want to backup my phone before upgrading to ios5 but I get an error message itunes could not back up the iphone because a session could not be started with the iphone. Please help me..

I want to backup my phone before upgrading to ios5 but I get an error message: itunes could not back up the iphone because a session could not be started with the iphone. I want to go to ios5, but I do not want to lose everything. I've gone to my device under preferences and I have no backup currently.
I have a Verizon Iphone 4 and a PC.
Please help me..

Hi Judy,
Im using windows 7 and im not a computer wizard, i've tried the method by using the instruction for Win7 but it does not work, same problem still exist.
Could uninstall itunes and reinstall it back on my pc fix my problem, please advise...... Many Thanks!
VBR,
ray

Precaution(for POSDM) before upgrade BW, current Ver. of POSDM is 7.01 target is 7.01 SP1

Similar Messages

Maybe you are looking for