Precautions to be taken before going for new PR Release strategy

Dear all,
We are going to implement release strategy with classification at item level release. Current process in our company release strategy without classification at item level release was implemented and its Production for past 3 years.
Need your advice on
1)If we go for new release strategy as off  with existing release strategy -what are the precautions to be taken before implementing new strategy - any problem will happen to existing data with old releases, which already release, yet to release?
2)Once after implementing the new releases, the PR with old release strategy (which is not release yet)u2026does this will trigger new release?
3)Any other which I missed out, please suggest me
Thanks
RS

Hi,
It is better to release all existing PRs using your current procedure without classificaton and clean up.
If you impliment procedure with classification, It depends on the parameters like Plant, value, purchasing group you are going to use in the strategy. Also you may decide whether to have overall req release or item level release of PR by having diffrent release groups.
REgards
Ram
Edited by: ramachandran subramanian on Feb 18, 2009 7:00 AM

Similar Messages

  • Steps to be taken before going for the BI_CONT 7.03 add on

    hi all,
    can anyone tell wat are the steps that needs to be taken before going in for the BI_CONT add on 7.03??? is there any proper procedure that needs to be followed for installing this??
    the last time that we went in for this BI CONT add on 7.03, the process went on for some 4 days... so thats why, we want to be absolutely sure this time around...
    any help would be highly appreciated and duly rewarded...
    Regards
    MM

    Dear Hexaware,
    You can apply BI_CONT add on 7.03 Via T Code SAINT it will take min 6 hour or depends on your database size or system hardware like your system  RAM.
    Thanks
    Pankaj Kumar

  • Pre-requisite before going for training to customise sap business one.

    what are the pre requisite before going for training to customise sap business one according to our requirements...I am going for training on SAP business one to Germany

    Hi
    In SAP B1 there is only 3 Modules.
    1 Technical Basic Knowldege in Programming in Visual Studio
    2 Accounting
    3 Logistics
    2 & 3 are Functional Consultant. Basic Knowledge in Business Management is Enough.
    SAP B1 is easy to learn and Understand.
    You can Manage. Well
    Regards
    Srini

  • Precautions to be taken before design infocube

    hi
    what precautions shuld be taken before designing an infocube?

    Yes Arun You are right
    But you can check with small amount of data also even in Develpoment.It will give you a rough estimate.
    basically that transaction gives you the ratio of all the tables with respect to all the
    data in the Cube it doesn't depend on how much data it contains.
    So if the ratio of the table exceeds the limit ( I think it's 15 to 20 %) those dimension will show you up in red and you do not need to check it in production and you can check it with small amount of data.
    Line items are defenately need to be taken care of and that depends upon the granularity of that particular object in the source system.
    Thanks

  • User Exit for Purchase Order Release Strategy

    Hi,
    I am a little new to this, how do I search for a user exit for purchase order release strategy (TCode ME29N).
    Thanks in advance.
    Mick

    Hi
    Check the following Exits and BADI for Pur Requisition
    Enhancement
    MEVME001 WE default quantity calc. and over/ underdelivery tolerance
    MM06E001 User exits for EDI inbound and outbound purchasing documents
    MM06E003 Number range and document number
    MM06E004 Control import data screens in purchase order
    MM06E005 Customer fields in purchasing document
    MM06E007 Change document for requisitions upon conversion into PO
    MM06E008 Monitoring of contr. target value in case of release orders
    MM06E009 Relevant texts for "Texts exist" indicator
    MM06E010 Field selection for vendor address
    MM06E011 Activate PReq Block
    MMAL0001 ALE source list distribution: Outbound processing
    MMAL0002 ALE source list distribution: Inbound processing
    MMAL0003 ALE purcasing info record distribution: Outbound processing
    MMAL0004 ALE purchasing info record distribution: Inbound processing
    MMDA0001 Default delivery addresses
    MMFAB001 User exit for generation of release order
    MRFLB001 Control Items for Contract Release Order
    AMPL0001 User subscreen for additional data on AMPL
    LMEDR001 Enhancements to print program
    LMELA002 Adopt batch no. from shipping notification when posting a GR
    LMELA010 Inbound shipping notification: Transfer item data from IDOC
    LMEQR001 User exit for source determination
    LMEXF001 Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001 Customer-Specific Source Determination in Retail
    M06B0001 Role determination for purchase requisition release
    M06B0002 Changes to comm. structure for purchase requisition release
    M06B0003 Number range and document number
    MEQUERY1 Enhancement to Document Overview ME21N/ME51N
    MELAB001 Gen. forecast delivery schedules: Transfer schedule implem.
    MEFLD004 Determine earliest delivery date f. check w. GR (only PO)
    MEETA001 Define schedule line type (backlog, immed. req., preview)
    ME590001 Grouping of requsitions for PO split in ME59
    M06E0005 Role determination for release of purchasing documents
    M06E0004 Changes to communication structure for release purch. doc.
    M06B0005 Changes to comm. structure for overall release of requisn.
    M06B0004 Number range and document number
    Business Add-in
    ME_PROCESS_REQ_CUST Enhancements for Processing Enjoy PReqs: Customer
    ME_PROCESS_REQ Enhancements for Processing Enjoy PReqs: Internal
    ME_PROCESS_PO_CUST Enhancements for Processing Enjoy Purchase Order: Customer
    ME_PROCESS_PO Enhancements for Processing Enjoy Purchase Order: Intern.
    ME_PROCESS_COMP Processing of Component Default Data at Time of GR: Custome
    ME_PO_SC_SRV BAdI: Service Tab Page for Subcontracting
    ME_PO_PRICING_CUST Enhancements to Price Determination: Customer
    ME_PO_PRICING Enhancements to Price Determination: Internal
    ME_INFOREC_SEND Capture/Send Purchase Info Record Changes - Internal Use
    ME_HOLD_PO Hold Enjoy Purchase Orders: Activation/Deactivation
    ME_GUI_PO_CUST Customer's Own Screens in Enjoy Purchase Order
    ME_FIELDSTATUS_STOCK FM Account Assignment Behavior for Stock PR/PO
    ME_DP_CLEARING Clearing (Offsetting) of Down Payments and Payment Requests
    ME_PURCHDOC_POSTED Purchasing Document Posted
    SMOD_MRFLB001 Control Items for Contract Release Order
    EXTENSION_US_TAXES Extended Tax Calculation with Additional Data
    ARC_MM_EKKO_WRITE BAdI: Enhancement of Scope of Archiving (MM_EKKO)
    ARC_MM_EKKO_CHECK BAdI: Enhancement of Archivability Check (MM_EKKO)
    MM_EDI_DESADV_IN Supplementation of Delivery Interface from Purchase Order
    MM_DELIVERY_ADDR_SAP Determination of Delivery Address
    ME_WRF_STD_DNG PO Controlling Reminder: Extension to Standard Reminder
    ME_TRIGGER_ATP Triggers New ATP for Changes in EKKO, EKPO, EKPV
    ME_TRF_RULE_CUST_OFF BADI for Deactivation of Field T161V-REVFE
    ME_TAX_FROM_ADDRESS Tax jurisdiction code taken from address
    ME_REQ_POSTED Purchase Requisition Posted
    ME_REQ_OI_EXT Commitment Update in the Case of External Requisitions
    ME_RELEASE_CREATE BAdI: Release Creation for Sched.Agrmts with Release Docu.
    ME_DEFINE_CALCTYPE Control of Pricing Type: Additional Fields
    ME_CHANGE_OUTTAB Enrich ALV Output Table in Purchasing
    ME_CHANGE_CHARACTER Customer-Specific Characteristics for Product Allocation
    ME_CCP_DEL_DURATION Calc. of Delivery Duration in CCP Process (Not in Standard)
    ME_CCP_BESWK_AUTH_CH BAdI for authorization checks for procuring plant
    ME_CCP_ACTIVE_CHECK BAdI to check whether CCP process is active
    ME_BSART_DET Change document type for automatically generated POs
    ME_BAPI_PR_CREATE_02
    ME_BAPI_PR_CREATE_01
    ME_BAPI_PO_CREATE_02
    ME_BAPI_PO_CREATE_01
    ME_BADI_DISPLAY_DOC BAdI for Internal Control of Transaction to be Invoked
    ME_ACTV_CANCEL_PO BAdI for Activating the Cancel Function at Header Level
    MEGUI_LAYOUT BAdI for Enjoy Purchasing GUI
    ME_CHECK_ALL_ITEMS Run Through Items Again in the Event of Changes in EKKO
    ME_COMMTMNT_REQ_RE_C Check of Commitment Relevance of Purchase Requisitions
    ME_COMMTMNT_REQ_RELE Check of Commitment Relevance of Purchase Requisitions
    ME_COMMTMNT_PO_REL_C Check for Commitment-Relevance of Purchase Orders
    ME_COMMTMNT_PO_RELEV Check for Commitment-Relevance of Purchase Orders
    ME_COMMITMENT_STO_CH BadI for checking if commitments for STOs are active
    ME_COMMITMENT_RETURN Commitment for return item
    ME_CIP_REF_CHAR Enables Reference Characteristics in Purchasing
    ME_CIP_ALLOW_CHANGE Configuration in Purchasing: Changeability Control
    ME_CIN_MM06EFKO Copy PO data for use by Country version India
    ME_CIN_LEINRF2V BADI for LEINRF03 excise_invoice_details
    ME_CIN_LEINRF2R BADI for CIN India - Delivery charges
    ME_CHECK_SOURCES Additional Checks in Source Determination/Checking
    ME_CHECK_OA Check BAdI for Contracts
    Reward points if useful
    Rgds,
    Naren

  • Badi for Purchase Requisition Release Strategy

    Can any help me to know about the BADI for Purchase Requisition Release Strategy .Is their any BADI to  control the PO Price for a PR release strategy
    Thanks for your help

    This badi is for schedule agreement ?
    BAdI: Release Creation for Scheduling Agreements with Release Documentation
    Use
    You can use this Business Add-In (BAdI) to influence release creation.
    This BAdI is used in the application component Scheduling Agreements (MM-PUR-OA-SCH).
    This BAdI includes the following methods:
    Change Data Before Release Creation (BEFORE_CREATION)
    Change Data After Release Creation (AFTER_CREATION)
    This BAdI is called during manual and automatic release creation.

  • External mail for workflow of release strategy for PO

    Dear All,
    I have configured the workflow of two step release strategy for purchase order and the internal mail is getting generated in the sap business workplace with the error message SWF_RUN 594 this i have taken care with SWE2 with changing the settings of "Behaviour upon error feedback" from "default" to "do not change linkage"
    Now the requiremnt is that the message has to be send to first level releaser through external mail and once first level release the PO external mail should be send to second level releaser.
    Please help me with the configuration step that is to be done
    Thanks in advance
    Naveen Singh

    Schedule the report Rswuwfml2. this will send workitem from sap inbox to respective user external mail id maintain in user master.

  • New po release strategy

    hi,
    i am having xxxxx class for po release strategy with 3 characteristics-(plant, po value and document type)
    now i want to have only 2 characteristics with document type and PO value.
    again i want to use new release codes for my new strategy, keeping the same class for release strategy.
    can i define new release strategy using the new codes?, then what shall be the impact of the same on below
    1. already released PO, now want to amend,(after new release strategy implimented)- what would be the effect on PO?? which release codes shall hit the same?
    2. already release PO(i understand there wont be a problem in GR, as release ia already effected)
    3. new PO shall catch the new strategy- no problem with the same.
    for implimenting the new strategy using the same class, can i delete the old release strategy with codes or i just need to remove the value mentioned in the classification view of the release proceedure.

    thank u.
    my point is while re-defining the release proceedure.
    earlier i had 150 release strategies and arround 40-50 release codes. now only 12 release codes
    i just need to get confirm, if i create a new release code and assign a new release strategy using the same class(only deleting the plant characteristics), what will happen to old po(released) for which now we are amending.
    i assume i need to delete/remove all the data of old release strategy available in classification view, and keeping the release codes as it is in release pre-requisites fr old release strategy.
    or just any body briefe me what are all the condition for changing the exsiting release strategy.if i need to create new release code,release strategy by using the same release class.

  • PO user exit for payment terms release strategy

    Hi friends,
    My requirement is to any changes to Payement terms in PO should trigger the re-release of the po....
    Plz. explain... How to proceed...
    which user exit i have to use........
    Thanks in advance,
    Navin.....

    My requirement is after changing of payment terms my release strategy is not changing for released po... i want to reset it for re-release after changes made to po changes....... which user exit i should should......or any other alternative....
    Rgds,
    Navin

  • Creating Roles for Purchase Req. release strategy with classification

    Hi friends,
    Since I have created Purchase req rel strategy where I have four release strategy
    1. For Plant 1 When value <= 5000 (Officer) will release , release code 01 release release strategy r1 and rel code L1
    2 For Plant 1 When value >= 5000 (Manager) will release , release code 01 release release strategy r2and rel code L2
    Now the manager will have 2 release code,if  officer is absent he could release the requisition.
    Same has to be done for plant 2
    The release Group and code needs to be assigned to the Roles , could anybody tell  me  where i could know about roles and will be able to create roles and assign authorisation objects to the Roles , and release group and code to the enduser.
    though its a basis job , since I have no idea , I mean I have never worked with Roles ,as now I have created the Release strategy with classification I need to assign authorisation objects to the Roles as I have four release strategy
    1. For Plant 1 lower value of requisition 1 codeL1(Officer)
    2  For higher value of requisition 2 code say Li and L2(Manager)
    Manager should have 2 codes if  officer is absent he could release
    Same has to be done for Plant 2
    Thanks N Regards
    Siddhartha

    Hii,
    Steps:
    1) Create a Role
    2) Add the authorization Object  M_EINK_FRG by taking the manual option
    3) Assign Release Code and Release Grp
    4) Assign the Role to the User ID which has the authorization of the Release Code and Grp.
    Regards,
    Kumar

  • Extracting values for characteristic on release strategy of Preq

    hello
    we have Preq release strategy based on classification and the release is based on amount. in the class, one of the characteristics contains the amount above which the strategy is being triggered: how can I extract all the values for all the strategies from this characteristic? is there a table for it?

    Hi,
    Please check the AUSP table for release strtegies and CAWN table for characteristics. Please check below link for additional information. Thanking you.
    Release strategy tables

  • Workflow for purchase requisition release strategy

    Hi all,
    I need an urgent help on Workflow for Purchase Requisition Release. The requirement is that when a purchase requisition with a given combination (Purchasing Group, Material Group and Account Assignment Category) is created and saved, it should trigger a workflow for approval of release or rejection to one specific business manager. If he dont responds in 2 days, it should be sent to other business manager. If any one of them releases the requisition, it should send a mail to the requestor that the requisition is released. And if it is rejected, then also a mail to be sent to the requester informing that his requisition is rejected...
    Can anyone take some pain and guide me step by step procedure to implement this or to use any existing one.... I know its BUS2009 thats used in this but really dont know how to implement it properly.
    Its urgent...
    Edited by: Hima on Apr 11, 2008 12:45 PM

    Check this link
    http://help.sap.com/saphelp_47x200/helpdata/en/04/92762546f311d189470000e829fbbd/frameset.htm
    Thanks
    Arghadip

  • IPod 5th Gen going for new battery: backup tips/tricks/warnings?

    Hello everyone:
    I have had my iPod 5th generation for 3 years or more; over the past 9 months or so the battery has been struggling to hold a charge. It has gotten to a point where even using all the tips for extending the battery life, I can only play about 5 to 8 songs before it dies completely and needs a recharge. It will usually show as being completely charged after 10-15 minutes (using a wall charger or a USB port makes no difference); if I use it at that point or leave it on the charger for 24 hours, it makes no difference.
    I've been saving for and planning on getting an iPhone, but it has not happened yet, so tonight I bit the bullet and made plans to send my little buddy in to have the battery replaced. I understand that, when I get the device back, I will need to re-load all of my music onto it.
    I have my iPod synched to my laptop, with all of my music from home saved to the hard drive there. I have also turned on home sharing, so I can share with my home desktop. (Both machines run Windows 7.) I am looking for advice/suggestions/warnings/tips to make sure I have everything saved and backed up properly, so that I can plug the device in and re-synch it when I get it back without losing anything. Any thoughts are welcome, be it in the form of a note here or a link to something I should read before I get the little sucker bubble-wrapped and shipped out!
    Thanks in advance for any help,
    Emmie

    See if y missed anything hee:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Going for the wicked Double-Chase-card-combo

    I'm looking to get the Chase Sapphire Preferred card sometime in the next couple of months for gathering travel miles but I am unimpressed with the 2x points only on travel/dining. Chase Freedom is a great combination to have with CSP (5x points on rotating categories including groceries/gas/amazon) since points can be transferred to CSP which, in turn, can be converted to frequent flier miles on a 1:1 ratio. This, obviously, can translate into big returns for travel. I'd prefer to get both cards all in one shot and just take the big hits to my credit now. After that, I'd just garden for a couple of years before going for anything else. Quick credit overview: FICO sits at around 735Utilization always <10% (now it's sitting at 3%)Good income-to-expense ratio (< 30%)Only 1 credit card @ $7500 limit2 inquiries within 12 months... 4 inquiries within 24 monthsAAoA 4.75 yrs with oldest account at 13.5 yearsNo baddies on any of the 3 CRs Has anyone tried doing this (2 cards at one time)? Any success stories? Any advice for moving forward with this?  

    SecretAzure wrote:
    axnjxn wrote:
    Hmm... is that 5 new credit card accounts or 5 new accounts in general? I looked it up and the purpose of this policy is to prevent card churn that has gained steam in the last few years. It would really suck if they held ALL new accounts to this standard. I only have 1 credit card and no plans to "churn" but my 3 student loans all began reporting 3 years ago, I got my only card 2 years ago, and we bought a house last year. That makes 5 and it would really suck to have to wait 2 years to get the CSP. EDIT: I have read that it is 2 years not 5 years. In that case, I will (hopefully) be good to go.Rejecting for 4 accounts in under 2 years. I won't be eligible for CSP until next February (if I chose to get it) because of this new rule. Be patient. Thanks for the advice. But in the last 2 years, I only have opened 2 new accounts and I don't see a reason to wait any longer for the CSP. By the time I apply in Sept, my score should be sitting around 740-750. We need to start gathering points up for the European trip we want to take in 4 years

  • Just tried to sign up for new ps offer?

    just signed up before deadline for new monthy ps and lightroom offer - already have lightroom but the monthly price for cs is good. Adobe has all my credit card details but would not complete - and told me not to reload page in case of duplication. I assume there are lot of people accessing the server and now I am stuck in limbo not knowing if I have signed up or if I go through the process again will I be paying twice. and if I ring tomorrow will they say that I passed the deadly. Not a good way to do business...

    If I ring tomorrow will they say that I passed the deadly.
    I don't have an answer to your question since I don't work for Adobe but just so you know, the deadline for signing on to the Photoshop Photography Package was recently extended by Adobe to Dec 31.
    https://blogs.adobe.com/photoshopdotcom/2013/12/9-99-photoshop-photography-program-extende d-to-dec-31.html

Maybe you are looking for