Precising storage location in MB1B
Hi. I have a problem with movement type '303'. There is no possibility in our MB1B to precise which storage location we would like to move our matnr to?
http://www.woiz.polsl.pl/eklfeniks/test/
That's a screen from my MB1B. In case of movement type '301' in place of red 'circle' there is a field 'Storage location'. How to achieve that effect in '303' movement type? Where to set that property? I'd be very thankful for useful info. Greetings. P.
Hi,
As per ur screen shot u have entered 2nd screen.
In that place u have to maintain receiving plant not sto loc.
below the item details are the supplying plant details.
So in ur case instead of receiving plant system displaying receiving site.
Path: Tcode: OMBW. select ur mvt type.go to details.double click on transfer postings. see the receiving plant description.
U tel to ur abaper to change the description as mention in above field.
This wil solve ur problem.
Reward if useful
Regards
Viru
Similar Messages
-
QM/MM: Stock transfer from QI to QI in different storage location
Hi Gurus,
I want to transfer a QI stock to QI stock in the same plant but different storage location using MB1B 323 movements. But it has got QM status active. So without taking usage decision it doesn't allow us to move the stock. It needs a special inspection type which allow this transaction.
I dont want to create another inspection lot and dont want usage decision.
Can anyone suggest me the solution?
Thanks
ShivHi Laxman,
Thanks again for your suggestion to use QAC2.
Is there any way of of scapping the same stock stock having inspection lot , status QI w/o UD?
Thanks
Shiv -
Good day!
A material was loaded to an incorrect storage location. Aside from deleting the material, is there a way in which i could edit the storage location?
Thank you so much.Hi,
Transferring Material stock from One Storage location to another doesnot generate any accounting entries / documents. So, you can transfer the storage location stock to correct storage location using MB1B 311or 313 & 315 (Two step Transfer) movement type.
Reg,
Ashok
Rewards Welcome. -
QI stock from one Storage location to other
I have a scenario where QM is implemented and Material is received in storage location "A" against purchase order through movement type 101.But for testing we need to send material to storage location"B"for testing. I want to send the material under inspection lying in storage location "A" to "B" for testing purpose. Is it possible to move stock under quality inspection , If yes through which movement tyep. Is there any process in QM which allows the stock under quality inspection to move.
Thanks in advance
Regards,
Jeewanhi
Goto MB1B and try with this movement types
311 Transfer posting storage location to storage location in one step
The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
Possible special stock indicators: E, K, M, Q
313 Stock transfer storage location to storage location in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
Possible special stock indicators:
K Goods receipt for purchase order to consignment stock
O Goods receipt for purchase order to stock of material provided to vendor
E GR for purchase order or order to sales order stock
Q GR for purchase order or order to project stock.
Regards -
Material transfer from one storage location to another storage location
HI
ISSUE : Actually we have to post 4 no's from storage location 1500 FNWP to 1500 BSTR
.by MB1B T.Code.But System takes 1,001.96gms automatically. *( movement type 911 E ) ( they want to post in units EA )*
Solution : In material master data classification tab given material conversion so when we raise mb1b then automatically it is converted to GRAMS
Is it correct ?what is the base unit of the material?
EA
are UNE and EA maintained as alternative units?
sorry i dont know une meaning but in material master data in addition tab they maintain conversion from EA to Gram.
what is the unit used in the the sales order?
EA -
Storage location selection for variable size item
Hi All
There is a BOM of finished good Material "XYZ" and there is a component "A" in the BOM. This Component A is a variable size item, its a metallic bar of length 4 meters. In BOM XYZ, only 1.5 meters is consumed.
Now when a production order is made for XYZ and the confirmation is done with movement type 261. All the materials are backflushed along with component A . The client's requirement is to transfer the remaining length of component A (i.e. 4 - 1.5 = 2.5 meters ) to a different storage location at the time of confirmation.
Please let me know how is it possible.
Thanks in Advance
RohitFULL STEPS:
1.first do mb1b 311 mvmt transfer posting for the components from raw-stor location to prod stor location. you can do for A
2. do GI for the components. for A for that final product . consume 1.5 so. the remaining component will be (3 ) there in the stor. location as per sap. (check in mmbe)
3. then do mb1b 311 transfer posting for the A component to raw-stor location. from the prod stor location.
or rever the transfer posting mb1b 312. -
Transfer of stock between two storage locations within a plant in two steps
Hi,
We have a plant 6400 & we have two storage locations 6401 & 6402. Each storage location belongs to a department which are located at some distance from one another.
The material to be moved from one storage location to another using a truck.
For the above mentioned process can we have the following process
(1) In first posting the material is issue from the storage location to a transit
(2) In second posting the material from the transit is received into the storage location
I am looking for a feature that is possible between two plants, can we have a similar feature available within a plant.
Warm regards,
UmeshHi Umesh,
It would be a business decision i suppose. If those 5 nos. are lost / damaged in transit & needs to be scrapped, then the ownership needs to be decided first. If it lies with the sender, then reverse the 5 nos. (MB1B mvt is 314) & then proceed with your scrapping or if it lies with the receiver then receive the 5 nos & then proceed with the scrapping.
Posting in system is one aspect, but a clear business rule is the key factor. So discuss with your materials mgmt personnel to define the process flow.
Hope the above helps.
Regards,
Vivek -
Transfer posting between storage location
Hi
2 questions: we are going to create a new storage location to make material movements:
1- We have to move stock between storage location.
Storage A(new): without WM
Storage B: under WM.
We would like to know wich is the best practice to do the transfer: MB1B? 301/311 movement type?
2 - If we decided to create a new storage location with WM. Wich are the recomendations or the points we have to consider:
Under the same Warehouse numer? A knew storage type? Wich are the activities in SPRo?
Thanks in advance for the help
Regards
Enzohttp://help.sap.com/saphelp_erp60_sp/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm
If it is the same physical Warehouse you could use the same Warehouse, otherwise a new or no Warehouse.
If the Storage Locations are near by and stock doesn't cross public roads and it's manually initiated, suggest just use a one step as it's the simplest process.
If there's a significant distance but on-site use two-step or if stock transferred by public roads, use STO. -
Authorization Control for Transfer Posting's Storage Location
Dear Gurus,
Hi ! May I know is that SAP has any Authorization Object to control Transfer Posting (SAP R3 4.0B) ?
Let say in MB1B I only allow certain user to do transfer posting with P230 storage location, how should I control it ? With Authorization Profile?
I had tried remove all storage location P230 authorization M_MSEG_LGO from those user who are not allow to use, but sad to say that most of the user who allow to use transaction MB1B also able to do good receipt or transfer posting with storage location P230.
I had check those user's profile, actually in their authorization, there could not get P230 in their M_MSEG_LGO authorization object.
Thank you!
Warm regardsHi,
I did not tried OLMB before, but I couldn't get the option you ask me to click.
Please refer to the screen, is it the Basis Administration is what you mention lately?
[http://www.pikipimp.com/pp/pimped_photo/s/image/40/552/543/OLMB-compiled.JPG?ts=1232093107390]
I had assign the storage location P230 to the authorize users, but the problem now was those unauthorized users also can use the storage location P230 to do Transfer Posting (MB1B) although I did not assign to them in PFCG.
Thank you.
Warm regards. -
HU Configuration for Storage Location
Hi everyone.
In the following point of config, there is something I do not understand.
I hope somebody can explain it to me.
HU Requirement for Storage Locations and Default Values for Deliveries
Are the Vendor and Customer needed in this table?
If they are, what purpose do they serve? What are they needed for?
And again, if they are, do they represent the Plant? or what?
Should they be created with special characteristics?
I know a lot of questions, But I do not understand.....
Thanks,
AlainHello Alain,
When you are making the storage location is HU managed, and when you try to execute any IM transactions like stock transfer, transfer posting, system doesn't directly post a material document unlike in regular non HU managed locations.
For example if you try to execute MB1B-311 from HU managed location to non HU location, system tries to create an outbound delivery document. And to create this outbound delivery document you need a customer and this is the place where system gets that customer information. Same is the case for vendor in inbound delivery.
And it doesn't require to create deliveries all the time if you want to execute these inventory transactions. VLMOVE transaction can be used to posting material document without deliveries.. But not all business scenarios will use VLMOVE as it has its own limitations.
Regards
Gopal -
Stock Transport Order UB order- Delivering Storage Location
We have UB / Stock Transport orders in place. Now we start a new flow of Stock Transport orders from a different Storage Location. When creating a UB order I only have the option to enter delivering Plant, not delivering SLoc.
So far I have a configged a new SLoc, SLoc reference , a new Shipping Condition.
What can I do to pull my materials for this new flow from my new SLoc?
Please let me know what you think, and I will be grateful.
NickHi All,
Check out You have assigned all Company code, Plant & Storage location. If it is assigned properly you will get it in Stock Transport order. T.Code: Mb1b Movement type: 301 you can check it out
I thing it solves your problem.
Regards,
Pherasath -
Specify Storage location in Movement type 311 - Migo
Dear All
we have 3 plants 1000 , 2000 , 3000 , every plant have many storage location as the following :
plant 1000 ( A01 , A02 , A03 )
plant 20000 ( B01 , B02 , B03 )
plant 1000 ( C01 , C02 , C03 )
i have on user "XX" access only plant 1000 ( A01 , A03 ) for some movement type (101 - 161 - 261 ) , also he used movement type ( 301 - 311 - 313 -315 ) to transfer from his storage location A01 , A03 to other storage location B01 , B02 , B03
when we add transaction MIGO to the user XX
how can i specify that user can only transfer to storage location B01 , B02 , B03 without access any movement to the storage location B01 , B02 , B03 .
i need help urgentlyHi,
You may maintain the authorization check for storage location in the path: OLMB - Authorization Management - Authorization Check for Storage Locations. Now, use the authorization object M_MSEG_LGO to restrict the usage based on user role. Refer the KBA: 1668678 - No authorization check for storage locations in inventory management
But if you are using one step procedure for stock transfer (301), then the user should have authorization for both plants to transfer the goods. If you want to restrict the same, you may go for two step procedure. But in case of 311 & 313, both the storage locations are entered in MB1B and hence both the storage locations are checked for authorization. Refer the note: 205448 - Authorization check M_MSEG_LGO for stock transfers
Regards,
AKPT -
Could WM setup same location in different storage location type ?
Hi
Now we have same part but which is bought from different vendor by currency RMB or USD.
We hope when we receive material, it will receive material by currency into different storage locatio type , Or Could we use mb1b to move mateiral in different storage location type ?
If there is any advice, please tell me , Thanks
Thanks
AliceHi, Expert
Really appreciated for your help. Currently for same part, we possibily buy it by different currency . Somteimes it's RMB, sometimes it's USD.
We use migo to receive these mateirals , most are in WM module, Some in IM module. Currently, when we receive po, in stock, we only track the qty. but now we hope to find a way if we also could mark the currrency on the same materails.
To provide matierals to production , we still need place the material in on location. Since when we delivery material /componet, we don't care its currency.
So we think if in WM, we could use different storage locaiton type for one location and seperated by different currency ?
Thanks
alice -
Turn off ATP for a Storage Location
Hi,
I want to turn off ATP for a Storage Location.
I am aware of a setting on IMG where we can have this done but not able to find the right node.
Can someone help me with it?
availability check NOT TO CHECK the stock at the storage location level
Thanks,
MikeAvailability checks can be triggered either automatically or manually:
The availability of components in an order can be checked automatically during order creation and/or order release. You specify in CustomizingOPJK per order type and plant whether the availability should be checked automatically. In addition, an automatic availability check can be carried out when the order is saved.
You can always trigger a manual availability check
The checking scope is defined via the Checking Group (in the material master) and the valid Checking Rule (in Customizing).
They define:
Which MRP elements are taken into account in the check
Which inventory categories are taken into account
Whether the replenishment lead time is taken into account
Whether the check is also to be carried out at storage location level
In Customizing (checking control) you specify which quantity is used to check the availability of a material. You can choose between the following:
Availability Check Against Planned Independent Requirements
In the check against planned independent requirements, the system only checks the open planned independent requirement quantities created for the components. This means that the ATP quantity is not included in this availability check nor are receipts or stocks.
This type of availability check is most useful:
if assembly planning or phantom assembly planning is used to plan the components
if quick statements about the availability situation are required and the results from this check are precise enough
The system uses the open planned independent requirements quantity at component level to determine a committed quantity and this quantity is copied to the planned order header in the Committed quantity field. As opposed to the availability check according to ATP logic, however, the committed quantity is not recorded in the dependent requirements. The planned independent requirements of the components are not consumed by the committed quantity but by the complete dependent requirements quantity. In availability checks that follow, the system can only commit quantities for the amount of planned independent requirements that have not yet been consumed.
In the availability check against planned independent requirements, the following dates/quantities are not calculated:
overall commitment date
partial commitment date/quantity
ATP quantity
In the check according to ATP logic, the system checks whether the dependent requirements of each component are covered by specific receipt and issue elements or by stock. This check is carried out dynamically, that is, each time you carry out the check, the system recalculates the current situation. If a quantity can be committed for the requirement date, the system enters precisely this quantity as the committed quantity in the dependent requirements and the ATP quantity for the components is reduced by the committed quantity. Therefore, in the next availability check, dependent requirements can only be committed for the amount of the remaining ATP quantity. -
Material transfer through storage location
Dear Sir,
Our company following process is incomplete, kindly correct us please if we are following wrong method:
Current method
1. We have two storage location one is 2101 (for production) and other is 2001(for warehouse).
2. Whenever we receive the material GRN is been done in storage location 2001
3. Then production people while doing packing plan, ask for material from storage location 2001 to 2101
4. For this production people create reservation through mb21 and reservation number gets created.
5. Then warehouse people transfer the material through mb1a through movement type 311
Issues:
1. Reservation list remains as it in mb25
Solution required :
1. How can warehouse people can transfer the material through generated reservation number so that reservation list can be closed.
2. Or any other method if we are following some wrong systemIs the manual reservation created for movement 311? and also, MB1A is for GI; MB1B is for transfer. Why are you using MB1A?
Also, when they do MB1B are they referencing the reservation?
Maybe you are looking for
-
Need info on Accessing portal services within a Web Dynpro application
Hi, I need information on Accessing portal services within a Web Dynpro application.I want to explore this topic.Can anyone give useful links? Thanks in advance. Rajani N
-
Ical-problem: since 10.8.3 i can't choose a calender which is in a folder
before updating to 10.8.3 it was no problem to choose a calender which is organized in a folder for new or existing event.
-
IPod mounting issues with iTunes 7.0.2
My computer is having trouble mounting my iPod. Initially, I thought the problem lied with the iPod since files appeared corrupted. But the files returned and iPod diagnostics gave it a healthy status. Today, my external firewire drive did not mount;
-
Help with java digital signing code
hello people. can anybody help me? i have find a java code to resolve my problem with sending pay in soap envelope with digital signature and attached certificate. i compiled it with jdk jdk1.6.0_37. and it works. i need it to work in built-in jvm in
-
I have camera EOS30 with two lenses: EF28-80mm 3.5-5.6II and EF 75-300mm 4-5.6III. I want to buy a digital camera to use these two lenses. Which digital DSL to choose? Thank you very much. Weihong