PREDEC_OBJKEY not filled for extractor 0CRM_OPPT_H

Hi all,
within our customer's dataflow we load data from CRM (5.0) to BW (7.0). For loading opportunity header data (0CRM_C04), extractor 0CRM_OPPT_H is being used. However, the preceding opportunity is not being filled from CRM. I've checked RSA3 and no PREDEC_OBJKEY is filled for a opportunity with preceding opportunity.
Does anybody know how to solve this problem? Already checked service.sap.com but i haven't found any valid notes.
Thanks!
Immanuel

Note:
Multiple relationship are possible for preceding opportunity (manually added to document flow), these are filled in Relations tab in transaction CRMD_ORDER within CRM.
Edited by: Immanuel V on Nov 3, 2008 11:40 AM

Similar Messages

SETUP tables not filling for 2LIS_02_ITM

Hello all,
I am trying to run the SETUP process from OLI3BW for few Purchasing doc's
But I do not see any entries in the setup table 'MC02M_0ITMSETUP' after the SETUP run.
and Yes,I have DELETED setup tables data prior to running the Setup process.
I did make sure DS,Extract structure are active and also 2LIS_02_ITM is active in RSA7 .
I could not find any Info on this kind of issue in SDN.
Any help is much appreciated !
Thanks,
Jb

Yes, I did check RSA3,RSA6 and LBWE .
LBWE has active DS for Item/Hdr/Scl(with Green light) and RSA6 has active DS's
But RSA3 has 0 records since SETUP process itself did not run and no data in SETUP table to pull from RSA3.
I schedule the job in the back ground and seems the job runtime was too short with no proper log.
Here are the messages from the Job log.
11:51:49 Job started                          00           516          S
11:51:49 Step 001 started (program RMCENEUA, variant &0000000000016, user name   XXXXXX)   00           550          S
11:52:00 Job finished                                                                        00           517          S
I am confused as whats happening here,I did not encounter such problem before doing SETUP's for Billing etc.
Thanks,
Jb

Error: Balancing field "Profit Center" in line item 324 not filled for t-code:PC00_M99_CIPE

Hi,
Anybody can help me. when I am posting the documents for all employees for the t-code:PC00_M99_CIPE, I am getting the following error,
kindly help me.

If you define document splitting criteria based on Profit Center and if your document contains multiple line items with different profit center, this type of error will come.
To check this, Go to IMG Path -- Financial Accounting (New) --> General Ledger Accounting (New) --> Document Splitting --> Define Document Splitting Characteristics for General Ledger
There check whether the mandatory check box is selected for profit Center.
So check in your document, whether any line item does not have profit center."
thanks
G. Lakshmipathi

LOCPT and LOCSL not filled even though partner function maintained

Hi,
In a nomination, I have the problem that the field LOCPT and LOCSL are not filled for one specific plant location even though I have created the in TC O4TQ for the plant and storage location.
I have checked the specific developments in Z_OIJ_NOM_DEFAULTING (BADI OIJ_NOM_DEFAULTING), but the value is already blank even before the exit is processed, so the problem must be in standard coding.
Can someone kindly tell me how I can best debug the problem? I would either like to know which standard function module is defaulting the LOCPT and LOCSL or have someone explain me how I can set a watch point to the field oijnomi-LOCPT, so that I can find out what the problem is.
Thanks for your help in advance
Petra Just

Hi
The problem is resolved for me ,i have checked further and found that in the vendor master the fax number for the vendor was not maintained correctly because of which the output message was not getting determined and invoice was not getting posted.
i came to know about this error by one tansaction,which i dont remember now..but if you go to SAP and see that the transaction just below MRRL, for automatic invoice posting and try to use that to post the invoice than it will clearly tell you at which stage the message determination is getting failed..there only i came to know that the fax number for vendor was incorrect.

Balancing field "Profit center" in line item 002 not filled

Dear All,
We are making incoming payment from customer in F-28
001     40              1031100881 TRA-IDBI-3384-IC                       240060.00
002     19H            10000106      HYDERABADI BANGELS          240000.00-
003      15              10000106      HYDERABADI BANGELS                60.00-
19 means Special GL credit
H- Security deposit
003   15   10000106      HYDERABADI BANGELS      60.00- (Debit note document)
*While making incoming payment we are getting Error :Balancing field "Profit center" in line item 002 not filled for customer line item.
But there is no field to capture the profit center. Please provide me solution.
Thanks in advance..
Regards,
Saisri.

Hi,
The error is due to document splitting being active, u wont give profit center directly, u need to give cost center. In cost center profit center will be updated.
So, assign cost center for line item 002 i.e in your case posting key 19H and then post.
Hope u understood.
regards
srikanth

To Generate msg if mandatory field is not filled

Hi Experts,
    I want to display msg if mandatory field is not filled , for that i called
CALL METHOD L_MESSAGE_MANAGER->REPORT_ATTRIBUTE_ERROR_MESSAGE
EXPORTING
    MESSAGE_TEXT        = ' PLEASE FILL ALL MANDATORY FIELD '
    ELEMENT             = ELEM_GENRAL
    ATTRIBUTE_NAME      = F_NAME
But i am getting error that F_NAME is not an attribute name but it is attribute name only
What i should do , Please Help

Hi Neeraj,
Remove Required property of that inputfield make it NORMAL.
For example your input field is INPUT...
if input is initial.
* report message
          CALL METHOD lo_message_manager->REPORT_ATTRIBUTE_ERROR_MESSAGE
            EXPORTING
              MESSAGE_TEXT   = 'Pick Quantity Should not be 0... '
              ELEMENT        = wa_temp // element
              ATTRIBUTE_NAME = 'PICK_QTY'.   // Attribute name( name used in context )
endif.
If you not fill input it will raise error message by hilighting the input field.
Cheers,
Kris.

Error Message-- For Balancing field "Profit Center" is not filled

Hi All,
When I do Shipment Start get Error-Message for Balancing field "Profit Center" is not filled!
A PGI for the DNXXXXXXXX is not possible!
Can u please help me how to resolve this issue ?
WM Baby

Hi,
AS per configuration , there is prifit centre assignment .Enter the profit centre in the field of profit centre by the help opf F4.
Regards,
Andra

Services tab in Service Purchase Order for Limit SC is not filled in

Hello All
As per the standard behaviour if a Free text SC is created for Services , the PO is created with one line item having description as " service item " and under the Services tab we can see the line items.
But when we create a SC from Limit for Services ( if we select Confirmation and Invoice ), The PO is created just like normal PO with item category as "D" and we do not see any line item in the Services tab in the PO.
Could you please let us know why this difference between Free text SC and for Limit SC.
Thanks in Advance.
Regards
Bharath Valleri

Hello Bharath,
What you describe is standard.
1- Limit SC
A limit item in SRM can give two kinds of R/3 PO items:
b- If you set "Invoice and confirmation" during Limit SC item creation, this means you will confirm your item, so R/3 PO item for service can only be created as category item "D",
Nevertheless, for your R3 PO item, you have populated an expected value (and you can fill in also an overall limit if check box "Unlimited" was not set at SC item creation).
That's why "Service" tab is empty. The "Limit" tab is populated in this case: confirmation will be done according to PO item expected value and not according to PO item quantity
a- If you set "Invoice only"during Limit SC item creation, this means confirmation is not allowed for you item, so R/3 PO item can only be created as item "B" (blanket). Blanket PO cannot be confirmed.
2- Free text SC
For a free text SC item with product type "Service", R/3 PO item will be a "D" category item.
"Service" tab is filled in with quantity and net price: confirmation will be done according PO item quantity.
So, main difference between Free text SC and Limit SC is quantity or expected value based confirmation.
Regards.
Laurent.

Initial filling of logistic table is not working for Volume Tracking

Hi,
I have set up the TSCA 12B scenario for volume tracking. When starting the initial filling of the logistic tables the system recognizes the composition correctly (log file is OK). However the result is that table CCRCT_EHS_COMP is not filled at all and the table CCRCT_EHS_COMP_REG is filled correctly. Has anyone experience what could be the reason that table CCRT_EHS_COMP is not filled?
Thanks,
Paul
I found the solution. There are 2 different version of determining the composition for TSCA 12B. I changed to the other one and the problem was solved.
Edited by: P. Hensgens on Feb 21, 2012 1:17 PM

Hi,
You have to debug the entire system behaviour , the approval process using the second approver.
As first step , please check the security level of the second approver. Restart of workflow is based on the security level of the approver.
you can find the parameter for security level in the personalization tab of the user .
there is one function module which determines wether the workflow should be restarted (or) not.
i do not remember the exact name of the function module.
1)start transaction se37
2)enter bbpwflrestart*.
3) system will return a number of function modules , of them one function module determines wether to restart the workflow (or) not.
Please check what does the above function module return for the user and the shopping cart , there will be one parameter 'restart' which triggers the start

I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures, even though I did and have checked multiple times. Please help, it's for Mother's Day.

I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures and that I need to in order to purchase it, even though I did and have checked multiple times. Please help, it's for Mother's Day.

Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

Live type files look grainy and do not fill the background when used for green screen backgrounds.

live type files look grainy and do not fill the background when used for green screen backgrounds. Ideas?

What I want to do is somehow make my entire iMovie project smaller by compressing it somehow but without losing any footage or audio or quality. At the moment the project is a 56GB iMovie project lasting approx 1hr. I have a mixture of miniDV footage, titles created in Live Type (they are better quality than anything available in iMovie) and audio.
The miniDV footage is automatically compressed when it transfers from my camcorder to my Mac, no worries there.
The LiveType titles contain a motion background (imported into LT) and then text which appears and disappears at set points. The titles vary in length but are about 5 seconds each.
The file size for the LT titles is approx 180MB per clip, the movie requires about 20 or so of these clips, making a very large file size overall.
Is there a way that I can save something in LT so that the file size is smaller yet still keep the quality and use the clip in my iMovie ?

Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

Bad video card, call Apple, get a case number and return it.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

HT203782 older programming will not fill my screen! where is the aspect ajustment for this devise? roku

when watching older tv programing my tv screen does not fill up! where is the aspect ajustment? roku & netgear have them my tv screen fills up using them!

depend on the source I suppose if you play non widescreen media on a widescreen tv there is no magic way to make it display full screen unless you cut up top and buttom

2lis_02_itm: bwvorg not filled

Hello all,
We face the following problem with extractors 2lis_02_itm and 2lis_02_scl.
Even though the transaction keys are properly maintained in the customizing (Transaction Key Maintenance for SAP BW), the field BWVORG is not filled.
We have taken a look at multiple SAP-notes, eg. 684465. However that didn't solve the problem.
Any more ideas why the field is not filled?
Thanks in advance!
Konrad

Hello,
SAP Note 353042 helped. The industry sector was not specified in our system!

PREDEC_OBJKEY not filled for extractor 0CRM_OPPT_H

Similar Messages

Maybe you are looking for