Predefined Appraisal - Changing scale descriptions
All,
I am aware that the predefined performance management solution is delivered with a fixed set of scales that you can use. My question is that can you amend the descriptions of these scales so they are incorporated correctly.
An example would be changing the descriptions ONLY (numbers remain the same) of the 90000011 Standard Quality Scale (1-5) that is associated with the predefined from Not Fulfilled, Partially Fulfilled, Met, Exceeds and Fully Exceeds to Not met, Almost there, Good Job, Brilliant and Superstar. And these new descriptions are then incorporated into the predefined WD screen?
As I am without access to a sandbox at present I cannot check.
Cheers,
Ash
Yes it works that way, I did that.
Best regards
Similar Messages
-
How Can I add/change text/description in accounting view of Vendor master ?
/nxk02 --> (give vendor, company code )
then check the check box of 'Accounting info' under Company code data block --> then hit 'Enter'
--> it goes to next screen. Then in this screen, click menu 'Extras' --> then press "Texts" under that menu.
So that popup screen appears with the Description.
I need to know from where these descriptions are coming or where these descption can be maintained ? Because I need to add/change these descriptions to my vendors
YOUR HELP IS HIGHLTY APPRECIATED. Please help....
THANKS IN ADVANCE.Hi Aman,
Because these texts are maintained at Company Code level for the Vendor, they are part of the Accounts Payable configuration in the SAP IMG.
SPRO > Financial Accounting > Accounts Receivable and Accounts Payable > Vendor Accounts > Master Data > Preparations for Creating Vendor Master Data > Define Text IDs for Accounting Texts (Vendors)
Transaction OBT5
Regards,
Monika -
Change material description in MM02
Hi,
System is allowing to change the material description in MM02 from any views.
Requirement is once the material code save, system should allow to change the description of product to user who have authorisation for Basic data 1 and 2 not other views.
Like I am giving Accounting view authorisation to one person, he should not able to change the product description.
Is it possibel and how?
Thanks,
Samir BhattHi,
Description is part of MARA table. If you give full authorization for General data fields to the persons that maintain basic 1 & 2 and does not give this authorization to the persons that are not allowed to change the description, you will achieve what you want. This will allow the financial people to see the general data fields but they will not be able to change them.
Regards,
MdZ -
Is it possible to change the description of an attribute in the local view
I have a characteristic in a query which has multiple attributes. In the global view I am able to change the descriptions on the attributes. But the local view does not show the updated descriptions - it shows the descriptions from the multiprovider? Any way I can match up the local and global view for the attribute descriptions ?
Hello,
Just close and open ur analyzer. Problem is that it is not getting refresh -
How to change the description in CV03(N) transaction ?
How to chnage the long test description in CV03N transaction
Posted: Jan 10, 2010 11:36 PM Edit Reply
Hi Friends,
I have a requirement as below:
1. Excecute the transaction CV04N
2. Give Document value(s) and Excecute
3. Double click on any row on the ALV generated which takes you to CV03N transaction
4. Here in the additional data Tab, I need to concatenate Subject1,Subject3,Subject3 values and this value need to be put Description in the Document data Tab.
Ex:
If Subject1 = Test1, Subject2 = Test2 and Subject3 = Test3 then i have to change the description as Test1
Test2 Test3 When the change followed by save is clicked.
Please drop your suitable answers ASAP.
Below is the code i have used using the BADI 'DOCUMENT_MAIN01' and the method 'AFTER_SAVE'.
Below is the code :
TYPES:
BEGIN OF ty_ausp,
objek TYPE ausp-objek, "Key of object to be classified
atinn TYPE ausp-atinn, "Internal characteristic
atwrt TYPE ausp-atwrt, "Characteristic Value
END OF ty_ausp.
DATA:
w_objek TYPE ausp-objek,
w_ltext(120) TYPE c,
w_name TYPE thead-tdname, "Name
wa_drat TYPE drat,
wa_ausp TYPE ty_ausp,
wa_tline TYPE tline,
wa_draw TYPE draw,
t_ausp TYPE STANDARD TABLE OF ty_ausp,
wa_thead TYPE thead, "SAPscript: Text Header
t_tline TYPE STANDARD TABLE OF tline.
CLEAR w_objek.
w_objek+0(3) = draw-dokar.
w_objek+3(25) = draw-doknr.
w_objek+28(2) = draw-dokvr.
w_objek+30(3) = draw-doktl.
SELECT objek " Key of object to be classified
atinn " Internal characteristic
atwrt " Characteristic Value
INTO TABLE t_ausp
FROM ausp
WHERE objek = w_objek
AND atinn IN ('0000000858', '0000001038', '0000001039' ).
IF sy-subrc = 0.
SORT t_ausp BY objek atinn.
ENDIF. " IF sy-subrc = 0.
LOOP AT t_ausp INTO wa_ausp.
CONCATENATE w_ltext wa_ausp-atwrt INTO w_ltext SEPARATED BY space.
ENDLOOP. " LOOP AT t_ausp INTO wa_ausp.
CLEAR w_name.
MOVE draw TO wa_draw.
w_name+0(3) = wa_draw-mandt.
w_name+3(3) = wa_draw-dokar.
w_name+6(25) = wa_draw-doknr.
w_name+31(2) = wa_draw-dokvr.
w_name+33(3) = wa_draw-doktl.
REFRESH t_tline.
CALL FUNCTION 'DELETE_TEXT'
EXPORTING
CLIENT = SY-MANDT
id = 'LTXT'
language = 'E'
name = w_name
object = 'DRAT'
savemode_direct = ' '
textmemory_only = ' '
local_cat = ' '
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0. "IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. "IF sy-subrc <> 0.
wa_tline-tdformat = '='.
wa_tline-tdline = w_ltext.
APPEND wa_tline TO t_tline.
wa_thead-tdobject = 'DRAT'.
wa_thead-tdname = w_name.
wa_thead-tdid = 'LTXT'.
wa_thead-tdspras = 'E'.
wa_thead-tdtitle = w_ltext.
DATA:
w_function TYPE c,
wa_newheader TYPE thead.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
CLIENT = SY-MANDT
header = wa_thead
insert = ' '
SAVEMODE_DIRECT = 'V'
OWNER_SPECIFIED = ' '
LOCAL_CAT = ' '
IMPORTING
function = w_function
newheader = wa_newheader
TABLES
lines = t_tline
EXCEPTIONS
id = 1
language = 2
name = 3
object = 4
OTHERS = 5.
IF sy-subrc <> 0. "IF sy-subrc <> 0.
Raise message
ENDIF.
REFRESH t_tline[].
CLEAR wa_thead.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
id = 'LTXT'
language = 'E'
name = w_name
object = 'DRAT'
ARCHIVE_HANDLE = 0
LOCAL_CAT = ' '
IMPORTING
header = wa_thead
TABLES
lines = t_tline
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Please help why it is not getting effeted OR
Give a differnt way of Solving this issue.
Please drop your suitable answers ASAP.
Regards,
Rama.PHi Claud,
Go to SPROSRM ServerCross App Basic SettingsNumber rangesDefine transaction typesSelect BUS2200 and double click on transaction typesHere you will see BID (transaction type)--Just double click on this and in the screen that follows change the description.
PS: The system will generate a transport request.
Regards,
Nikhil -
Change the description of the line in the EMOLUMENTS PAID in the FORM16
Hello Seniors,
A small issue regarding the change the name of the FIXED DA to DEARNESS ALLOWANCE in the EMOLUMENTS PAID in the FORM16.
my client asked me to change the description of the DA.
how can i change this, programm HINCF160 is SAP STANDARD it is not changeable.
please help me regarding this.
thanks & regards,
praneeth kumarHi Praneeth,
Even i m trying the same at my company, but it is without ESS...so doing RND on tht... Just check this link out...it may be helpful for you...also i dnt found ur E-mail ID in ur Business card...
http://help.sap.com/saphelp_46c/helpdata/EN/53/6e693fa14411d19d450000e8215202/frameset.htm
Regards,
Prasad Lad -
Change the description of the change request number" in SE10 after release
Hi All
Is there way to change the
"description of the change request number" in SE10
after releasing the change request number?
appreciate your feedback
Thanks you
IverHello
I do not know a way to do it in se10 but a simple program could do the trick.
Include the following code in your program.
update e07t set as4text = 'your new description'
where trkorr = your_cr and langu = 'E'.
Of course you will have to wrestle with the 'moral issue' of directly updating SAP delivered tables
Regards
Greg Kern. -
Hi Gurus,
Can we change the description of the created referenced characteristics in the COPA.
Thank You.
Points will be rewarded for sure.Hi!
Since, the description is in the display mode, while being in editing mode, can't be able to change it.
Is there any way out to change it.
Thank You.
Ravi -
Change the description of the field
Dear All
I have a requirement where in i have to change the decription of the field " sales district" to "cluster" in the customer master.Can anybody please guide me how to do that??I have tried to go to SE11 against the table KNVV & searched for VKBUR field to change the description but wasnt able to navigate further to resolve the issue.Hi,
use transaction cmod. In the menu point GoTo -> Text enhancements -> Keywords -> change. You will see a pop up Key in your data element. Now you can change the field describtion.
Regards
William -
Change the description of the product attributes
Hi,
I want to change the description of the product attributes from 1 - 6(Check Box) in MM02 in the SALES : Sales Org 2 Tab.
How to do this.
Kindly let me know.
Regards
ManojHi dude,
You can try Text Enhancements for ur Data Element in CMOD.
Tcode CMOD, Goto>text enhancements>Data Elements-->NewDEcust Doc.
Regards
Srikanth M -
How to change the description of Transaction Type
hi ,expert
i want to change the description of Tansaction type.
eg, change the description of BUS2200 :'RFx ' to 'RFQ' .
please give me some advice. thanks in advance.
regards
claudHi Claud,
Go to SPROSRM ServerCross App Basic SettingsNumber rangesDefine transaction typesSelect BUS2200 and double click on transaction typesHere you will see BID (transaction type)--Just double click on this and in the screen that follows change the description.
PS: The system will generate a transport request.
Regards,
Nikhil -
The textbox to change the description of the iCloud email account that existed in all previous versions of iOS, and is available for all other types of email accounts under iOS 8, appears to have been removed. Without this textbox, it is not possible to change the default description of "iCould", or to change a description that was set with a previous version of iOS. The description field still exists, as the value that I set on a previous version of iOS is still being used by some of my iOS devices, but there is currently no way to change it via the current iOS 8 UI. The description field is available to change for all other kinds of email accounts.
Confimed. And I hope they put it back soon.
I used an iCloud backup to transfer everything on my iPhone 5s to my iPhone 6. The (modified) description for my iCloud account transferred and appears the way I want it to appear on my iPhone 6. However, it cannot be changed.
Alternatively, I also have a new iPad Air 2 that I set up as a completely new iPad (i.e. I did not transfer anything from an older iPad). The iPad shows the description for my iCloud account as the default: "iCloud." It, too, cannot be changed.
True, this is only a minor annoyance, but it would be less of an issue if Apple had not removed a feature that previously existed in iOS 7.
I'm not sure if the removal was intentional or unintentional, but, again, I hope this gets fixed soon. In the meantime, I would be interested in anyone can find a workaround. -
Can you change the description in contacts from iCloud\
In contact can you change the description from "icloud" to a differant name?? I have several accounts and want them to have a unique name. Any Help?
You mean in the Music App .... And you can't. You can only view songs in a list.
-
Changing the description field in AP Invoice
Hi is it possible to change the description field in an 'open' posted AP or AR invoice? I assume you have to credit note the invoice and re enter it with the new line item description which seems a long way around when only the text is being changed and not the coding or amounts.
thanks judiHi,
All marketing documents, whether closed/open, do allow the user to change the remarks/narrantion. This field is located in the Footer Fields - left corner of the form.
Pls check out.
Assign points if useful.
Thanks,
Srikanth -
How to change infoobject descriptions in a query after change the infoobjec
Hi all,
Imagine that you have 200 queries in production and need to change some descriptions in 2 infoobjects. eg:
Infooject 1 = "Customer Sales View"
Changed to "Cust.View of New MKT"
Infooject 2 = "Material for sales"
Changed to "Material"
Is there any way to change all queries automatically ? Via Report or Function or Transaction ?
Suggestions ?
Best Regards,
Mauro.Hello Madhukar,
We recently had upgraded to NW2004s and in few queries even when I login with different language for instance Portugese the infoobject descriptions still show up in english and are not changed.
Can you please let me know if I need to update the RSZELTXT table along with other tables. If so can you please forward me the ABAP Code in order to do the same.
Your help would be really appreciated if you can reply promptly as our UAT is pending on this issue.
Let me know.
Thanks
Dharma.
Maybe you are looking for
-
Memory Question for min 2011 iMac
I want to add more memory for my imac. I done the searches but I'm getting bits and pices of info so here are my questions ( I have 8gb of memory installed now. 2x4 gb) 1. how much can i put in the 16 apple says or 32 ive read? (or any inbetween)? 2.
-
With my MacBook Pro, OS X Yosemite, iPhoto 9.6, I find I have two iPhoto libraries. I discovered this when opening iPhoto today. One has only a few old images; the other, all current images. I cannot export images from the current image library.
-
How can I Write a sine wave in an Access-fil​e?
I measure a sine wave in LabView 6i. How can I write the datas automatically to an Acces-file, at the same time? In my program, I managed it with Execute SQL.vi, I change a number in a SQL statement(String) -> after this I push start and then it writ
-
Cannot reject/delete sales order line item due to del.date in 2210
Hi all, not sure if anyone else had this issue already.... Situation : Sales order line item entered with delivery date in 2210. We would like to correct this order but can't.... every time SAP issues error : Error determining posting period (info
-
Varray ORA-06533: Subscript beyond count
Hi all In my package body i've declared create or replace package body mng_res_pack is TYPE rest_ans_type IS VARRAY(5) OF NUMBER(1); rest_ans rest_ans_type:=rest_ans_type(); PROCEDURE fetch_rest_data IS rest_rec restore_users%ROWTYPE; MONE NUMBER :=0