Predefined the Transaction S_ALR_87012284

Hello,
if you open the Transaction S_ALR_87012284 you will find on the tab outputcontrol the field
scope compression. In these field is figure 2 predefined. I want to predefined the figure 3.
Is this possible to predefined this field with figure 3?
Can You explain me how it works?
regards
Mathias

The you'll need to use a transaction variant. Search on the forum. Like e.g.:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d1443e-0184-2c10-c68d-c612f771fe6f?quicklink=index&overridelayout=true

Similar Messages

How do I create a new Work Center for the transaction launcher and links

Hi
The requirement here is for me to find out if I can create a new Work Center that will contain up to 6 assignment blocks and each block having either links to websites and BW reports, or triggers to R/3 applications via the transaction launcher.
Can I do this purely through customising or do I need to create a new view using BSPs? If I can do it through customising please could I have a few pointers to what component I would need to use/copy?
Regards
Declan

Hi Robert,
Thanks again for taking the time to reply.
Just so I understand, if I want to show a work center I need to link it to a component / view? I think this was the original query - do I need a developer to create the view that contains the 6 blocks with their links to reports, transactions and websites? I think when I talk about blocks I mean 1 viewset containing 6 views. There is no SAP standard view that would suit my requirements is there? Even if the work center had 8 views, I can always hide the two views in configuration.
After the developer has created the view, I then reference that component in the target Id in the define logical links section of my work center.
If my understanding is right, then it follows that it is not possible to create a user specific work center without some development.
Is this correct?
Cheers
Declan

Error while running a BDC for the Transaction F-02

Hi,
 I'm getting an error "Parking not possible during Batch Input" while running a BDC for the transaction F-02.
 When i click on the error message it displays the message [b]"In Customizing, you can control whether an error message is issued."
 How to solve this issue?.
 Waiting for ur replies.........
Regards
N.Senthil

Hi,
When you are doing the recording in SHDB, and in the same screen where the TCODE to be recorded is given, there are options that you can choose called "Recording Parameters"...Select the checkbox which says "Not a Batch Input Session", this will set the sy-binpt variable to " "(in a recording by default it is "X")...and you will not get this error...
Also make sure while writing the BDC program to make use of the "bdc options" parameter which has this property to switch of sy-binpt...
 Refer below theard for sample bdc code for f-02.
https://forums.sdn.sap.com/click.jspa?searchID=5126766&messageID=1538409
Regards

NAMED_SEQUENCEs: The transaction is no longer active

Hi all,
          I am currently trying to get Petstore 1.3.1 going on WLS 7.0.0.1 an got
          into quite some trouble (btw, does anyone have experience with this
          cofiguration?). After successful deployment in /application I tried the
          "populate database" link on ~/petstore/index.jsp and got:
          java.sql.SQLException: The transaction is no longer active (status = Committed). No further JDBC access is allowed within this transaction.
               at weblogic.jdbc.jts.Connection.checkIfRolledBack(Connection.java:541)
               at weblogic.jdbc.jts.ResultSet.close(ResultSet.java:293)
               at weblogic.jdbc.rmi.internal.ResultSetImpl.close(ResultSetImpl.java:144)
               at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:96)
               at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:87)
               at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResultSet(RDBMSPersistenceManager.java:1797)
               at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResources(RDBMSPersistenceManager.java:1679)
               at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.execGenKeyNamedSequenceTableUpdateAndQuery(RDBMSPersistenceManager.java:1489)
               at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyNamedSequenceTable(RDBMSPersistenceManager.java:1307)
               at com.sun.j2ee.blueprints.address.ejb.AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.ejbCreate(AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.java:1723)
               at java.lang.reflect.Method.invoke(Native Method)
               at weblogic.ejb20.manager.DBManager.create(DBManager.java:737)
               at weblogic.ejb20.manager.DBManager.localCreate(DBManager.java:716)
               at weblogic.ejb20.internal.EntityEJBLocalHome.create(EntityEJBLocalHome.java:182)
               at com.sun.j2ee.blueprints.address.ejb.AddressEJB_fvu9sn_LocalHomeImpl.create(AddressEJB_fvu9sn_LocalHomeImpl.java:155)
               at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator.createAddress(AddressPopulator.java:94)     at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator.access$7(AddressPopulator.java)
               at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator$1.create(AddressPopulator.java:73)
               at com.sun.j2ee.blueprints.petstore.tools.populate.XMLDBHandler.endElement(XMLDBHandler.java:145)
               at org.xml.sax.helpers.XMLFilterImpl.endElement(XMLFilterImpl.java:595)
               at com.sun.j2ee.blueprints.petstore.tools.populate.XMLDBHandler.endElement(XMLDBHandler.java:158)
               at weblogic.apache.xerces.parsers.SAXParser.endElement(SAXParser.java:1411)
               at weblogic.apache.xerces.validators.common.XMLValidator.callEndElement(XMLValidator.java:1613)
               at weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:1219)
               at weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:396)
               at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:1119)
               at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)
               at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:133)
               at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
               at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
               at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
               at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
               at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
               at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
               at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
               at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
               at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
               at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
               at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
               at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
               at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
               at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.populate(PopulateServlet.java:162)
               at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.doPost(PopulateServlet.java:118)
               at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.doGet(PopulateServlet.java:106)
               at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
               at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
               at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
               at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
               at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
               at com.sun.j2ee.blueprints.signon.web.SignOnFilter.doFilter(SignOnFilter.java:151)
               at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
               at com.sun.j2ee.blueprints.encodingfilter.web.EncodingFilter.doFilter(EncodingFilter.java:77)
               at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
               at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5366)
               at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:721)
               at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3043)
               at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2468)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
          and similar traces for ContactInfo, CreditCard, Account, Profile, ...
          I nevertheless get to the main screen of the Petstore as if everything
          worked well. In fact, it seems like the DB got populated somewhat
          correctly; only tbe named sequence tables are unchanged (btw: are the
          named sequence tables expected to be auto-created with
          create-default-dbms-tables enabled?). The strange thing is that every
          correct row (in my case having the even IDs) is followd by an all (except the
          odd numbered ID field) "NULL" row. This does not happen in all
          ...EJBTABLEs --- Address and ContactInfo for example are affected, but Profile
          is not.
          It seems as if ordering a rattlesnake would work well, even though more
          of the same type of Execptions appear in the jdbc log. I suspect that the
          trouble will start when the 10 cached ID are exhausted.
          I just tried the Petstore 1.3 example provided with WLS 7.0.0.1 on a Linux
          machine and WLS 7.0 on an NT machine andfound petty much the same
          exception after enabling the jdbc log:
          java.sql.SQLException: The transaction is no longer active (status = Committed). No further JDBC access is allowed within this transaction.
               at weblogic.jdbc.jts.Connection.checkIfRolledBack(Connection.java:541)
               at weblogic.jdbc.jts.ResultSet.close(ResultSet.java:293)
               at weblogic.jdbc.rmi.internal.ResultSetImpl.close(ResultSetImpl.java:144)
               at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:96)
               at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:87)
               at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResultSet(RDBMSPersistenceManager.java:1797)
               at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResources(RDBMSPersistenceManager.java:1679)
               at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.execGenKeyNamedSequenceTableUpdateAndQuery(RDBMSPersistenceManager.java:1489)
               at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyNamedSequenceTable(RDBMSPersistenceManager.java:1307)
               at com.sun.j2ee.blueprints.po.address.ejb.AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.ejbCreate(AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.java:1755)
               at java.lang.reflect.Method.invoke(Native Method)
               at weblogic.ejb20.manager.DBManager.create(DBManager.java:737)
               at weblogic.ejb20.manager.DBManager.localCreate(DBManager.java:716)
               at weblogic.ejb20.internal.EntityEJBLocalHome.create(EntityEJBLocalHome.java:182)
               at com.sun.j2ee.blueprints.po.address.ejb.AddressEJB_fvu9sn_LocalHomeImpl.create(AddressEJB_fvu9sn_LocalHomeImpl.java:86)
               at com.sun.j2ee.blueprints.po.purchaseorder.ejb.PurchaseOrderHelper.persistPoCMRInfo(PurchaseOrderHelper.java:116)
               at com.sun.j2ee.blueprints.po.purchaseorder.ejb.PurchaseOrderHelper.persistPO(PurchaseOrderHelper.java:164)     at com.sun.j2ee.blueprints.opc.ejb.MsgBean.doWork(MsgBean.java:103)
               at com.sun.j2ee.blueprints.opc.ejb.MsgBean.onMessage(MsgBean.java:72)
               at weblogic.ejb20.internal.MDListener.execute(MDListener.java:348)
               at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:282)
               at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:263)
               at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2309)
               at weblogic.jms.client.JMSSession.execute(JMSSession.java:2232)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
          Is there a problem with my general setup maybe, or is this exception to
          be ignored? Is that a known issue with Petstore 1.3/WLS7?
          Kai


Tyson Norris wrote:
Hello -
We are attempting to use a design where a connection will remain in use over multiple
transactions.
Is there any way to get weblogic to allow this?No, at least not jts connections. Non-XA connections need our management to
ensure all the work gets committed or rolled back atomically. It doesn't
cost anything to always obtain jts connections in the context of the tx
they are needed.
Besides XA, you could get a plain non-transactional connection and do your
own jdbc commits/rollbacks...
Joe
>
We are currently experiencing the stack trace below, when a database read is
attempting to use the same connection as the previously committed tx.
Thanks for any advice.
Tyson
org.springframework.jdbc.UncategorizedSQLException: (HibernateAccessor): encountered
SQLException [The transaction is no longer active - status: 'Committed'. No further
JDBC access is allowed within this transaction.]; nested exception is java.sql.SQLException:
The transaction is no longer active - status: 'Committed'. No further JDBC access
is allowed within this transaction. java.sql.SQLException: The transaction is
no longer active - status: 'Committed'. No further JDBC access is allowed within
this transaction. at weblogic.jdbc.wrapper.JTSConnection.checkIfRolledBack(JTSConnection.java:118)
at weblogic.jdbc.wrapper.JTSConnection.checkConnection(JTSConnection.java:127)
at weblogic.jdbc.wrapper.Connection.prepareStatement(Connection.java:324) at weblogic.jdbc.wrapper.JTSConnection.prepareStatement(JTSConnection.java:426)
at com.benefitpoint.cmp.hibernate.AbstractDataManager$2.doInHibernate(AbstractDataManager.java:501)
at org.springframework.orm.hibernate.HibernateTemplate.execute(HibernateTemplate.java:150)
at com.benefitpoint.cmp.hibernate.AbstractDataManager.execRawSqlPreparedStatement(AbstractDataManager.java:568)
at

Petstore 1.3.1 NAMED_SEQUENCE problem: "The transaction is no longer active"

Hi all,
I am currently trying to get Petstore 1.3.1 going on WLS 7.0.0.1 an got
into quite som trouble (btw, does anyone have expereince with this
cofiguration?). After successful deployment in /application I tried the
"populate database" link on ~/petstore/index.jsp and got:
java.sql.SQLException: The transaction is no longer active (status = Committed). No further JDBC access is allowed within this transaction.
     at weblogic.jdbc.jts.Connection.checkIfRolledBack(Connection.java:541)
     at weblogic.jdbc.jts.ResultSet.close(ResultSet.java:293)
     at weblogic.jdbc.rmi.internal.ResultSetImpl.close(ResultSetImpl.java:144)
     at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:96)
     at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:87)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResultSet(RDBMSPersistenceManager.java:1797)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResources(RDBMSPersistenceManager.java:1679)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.execGenKeyNamedSequenceTableUpdateAndQuery(RDBMSPersistenceManager.java:1489)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyNamedSequenceTable(RDBMSPersistenceManager.java:1307)
     at com.sun.j2ee.blueprints.address.ejb.AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.ejbCreate(AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.java:1723)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.ejb20.manager.DBManager.create(DBManager.java:737)
     at weblogic.ejb20.manager.DBManager.localCreate(DBManager.java:716)
     at weblogic.ejb20.internal.EntityEJBLocalHome.create(EntityEJBLocalHome.java:182)
     at com.sun.j2ee.blueprints.address.ejb.AddressEJB_fvu9sn_LocalHomeImpl.create(AddressEJB_fvu9sn_LocalHomeImpl.java:155)
     at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator.createAddress(AddressPopulator.java:94)     at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator.access$7(AddressPopulator.java)
     at com.sun.j2ee.blueprints.petstore.tools.populate.AddressPopulator$1.create(AddressPopulator.java:73)
     at com.sun.j2ee.blueprints.petstore.tools.populate.XMLDBHandler.endElement(XMLDBHandler.java:145)
     at org.xml.sax.helpers.XMLFilterImpl.endElement(XMLFilterImpl.java:595)
     at com.sun.j2ee.blueprints.petstore.tools.populate.XMLDBHandler.endElement(XMLDBHandler.java:158)
     at weblogic.apache.xerces.parsers.SAXParser.endElement(SAXParser.java:1411)
     at weblogic.apache.xerces.validators.common.XMLValidator.callEndElement(XMLValidator.java:1613)
     at weblogic.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:1219)
     at weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:396)
     at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:1119)
     at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:135)
     at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:133)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at org.xml.sax.helpers.XMLFilterImpl.parse(XMLFilterImpl.java:371)
     at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.populate(PopulateServlet.java:162)
     at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.doPost(PopulateServlet.java:118)
     at com.sun.j2ee.blueprints.petstore.tools.populate.PopulateServlet.doGet(PopulateServlet.java:106)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:20)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at com.sun.j2ee.blueprints.signon.web.SignOnFilter.doFilter(SignOnFilter.java:151)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at com.sun.j2ee.blueprints.encodingfilter.web.EncodingFilter.doFilter(EncodingFilter.java:77)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5366)
     at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:721)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3043)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2468)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
and similar traces for ContactInfo, CreditCard, Account, Profile, ...
I nevertheless get to the main screen of the Petstore as if everything
worked well. In fact, it seems like the DB got populated somewhat
correctly; only tbe named sequence tables are unchanged (btw: are the
named sequences expected to be auto-created with
create-default-dbms-tables enabled ?). The strange thing is that every
correct row (in my case having the even IDs) is followd by an all (except the
odd numbered ID field) "NULL" row. This does not happen in all
...EJBTABLEs --- Address and ContactInfo for example are affected, but Profile
is not.
It seems as if ordering a rattlesnake would work well, even though more
of the same type of Execptions appear in the jdbc log. I suspect that the
trouble will start when the 10 cached ID are exhausted.
Any ideas?
Kai

I just tried the Petstore 1.3 example provided with WLS 7.0.0.1 and found
petty much the same exception after enabling the jdbc log:
java.sql.SQLException: The transaction is no longer active (status = Committed). No further JDBC access is allowed within this transaction.
     at weblogic.jdbc.jts.Connection.checkIfRolledBack(Connection.java:541)
     at weblogic.jdbc.jts.ResultSet.close(ResultSet.java:293)
     at weblogic.jdbc.rmi.internal.ResultSetImpl.close(ResultSetImpl.java:144)
     at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:96)
     at weblogic.jdbc.rmi.SerialResultSet.close(SerialResultSet.java:87)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResultSet(RDBMSPersistenceManager.java:1797)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.releaseResources(RDBMSPersistenceManager.java:1679)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.execGenKeyNamedSequenceTableUpdateAndQuery(RDBMSPersistenceManager.java:1489)
     at weblogic.ejb20.cmp.rdbms.RDBMSPersistenceManager.getNextGenKeyNamedSequenceTable(RDBMSPersistenceManager.java:1307)
     at com.sun.j2ee.blueprints.po.address.ejb.AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.ejbCreate(AddressEJB_fvu9sn__WebLogic_CMP_RDBMS.java:1755)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.ejb20.manager.DBManager.create(DBManager.java:737)
     at weblogic.ejb20.manager.DBManager.localCreate(DBManager.java:716)
     at weblogic.ejb20.internal.EntityEJBLocalHome.create(EntityEJBLocalHome.java:182)
     at com.sun.j2ee.blueprints.po.address.ejb.AddressEJB_fvu9sn_LocalHomeImpl.create(AddressEJB_fvu9sn_LocalHomeImpl.java:86)
     at com.sun.j2ee.blueprints.po.purchaseorder.ejb.PurchaseOrderHelper.persistPoCMRInfo(PurchaseOrderHelper.java:116)
     at com.sun.j2ee.blueprints.po.purchaseorder.ejb.PurchaseOrderHelper.persistPO(PurchaseOrderHelper.java:164)     at com.sun.j2ee.blueprints.opc.ejb.MsgBean.doWork(MsgBean.java:103)
     at com.sun.j2ee.blueprints.opc.ejb.MsgBean.onMessage(MsgBean.java:72)
     at weblogic.ejb20.internal.MDListener.execute(MDListener.java:348)
     at weblogic.ejb20.internal.MDListener.transactionalOnMessage(MDListener.java:282)
     at weblogic.ejb20.internal.MDListener.onMessage(MDListener.java:263)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:2309)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:2232)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)
Is there a problem with my general setup maybe, or is this exception to
be ignored?
Kai

How to find out the Transactions used per month & the USER who used that

Hi,
1)How to find out the Transactions used per month & the USER who used that?
2)and can i get the above same for minimum 20 month?
System : SAP- Enterprise Core Component.

You can use my program...
*& Report Z_ABAP_TCODE_MONITOR
*****& Program Type : Report *
*****& Title : Z_ABAP_TCODE_MONITOR *
*****& Transaction code : ZTCODE_USAGE *
*****& Developer name : Shailendra Kolakaluri *
*****& Deveopment start date : 26 th Dec 2011 *
*****& Development Package : ZDEV *
*****& Transport No : DEVK906086 *
*****& Program Description : This program is to display
*List all tcodes executed during previous day.
*& Show the number of users executing tcodes
*& Modification history
REPORT Z_ABAP_TCODE_MONITOR.
*& List all tcodes executed during previous day.
*& Show the number of users executing tcodes
TYPE-POOLS : slis.
DATA: ind TYPE i,
 fcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
 layout TYPE slis_layout_alv,
 variant TYPE disvariant,
 events TYPE slis_t_event WITH HEADER LINE,
 heading TYPE slis_t_listheader WITH HEADER LINE.
*REPORT z_report_usage.
TYPES: BEGIN OF zusertcode,
date TYPE swncdatum,
user TYPE swncuname,
mandt TYPE swncmandt,
tcode TYPE swnctcode,
report TYPE swncreportname,
count TYPE swncshcnt,
END OF zusertcode.
*data : date type n.
DATA: t_usertcode TYPE swnc_t_aggusertcode,
 wa_usertcode TYPE swncaggusertcode,
 wa TYPE zusertcode,
 t_ut TYPE STANDARD TABLE OF zusertcode,
 wa_result TYPE zusertcode,
 t_result TYPE STANDARD TABLE OF zusertcode.
PARAMETER: month TYPE dats DEFAULT sy-datum.
*PARAMETER: date TYPE dats.
*select-options : username for wa_usertcode-account.
START-OF-SELECTION.
PERFORM get_data.
PERFORM get_fieldcatalog.
PERFORM set_layout.
PERFORM get_event.
PERFORM get_comment.
PERFORM display_data.
FORM get_data .
*date = sy-datum - 2 .
After start-of-selection add this line (parameter Month required 01 as day).
concatenate month+0(6) '01' into month.
CALL FUNCTION 'SWNC_COLLECTOR_GET_AGGREGATES'
 EXPORTING
 component = 'TOTAL'
 ASSIGNDSYS = 'DEV'
 periodtype = 'M'
 periodstrt = month
 TABLES
 usertcode = t_usertcode
 EXCEPTIONS
 no_data_found = 1
 OTHERS = 2.
wa-date = month.
*wa-date = date.
wa-mandt = sy-mandt.
wa_usertcode-account = username.
LOOP AT t_usertcode INTO wa_usertcode.
 wa-user = wa_usertcode-account.
 IF wa_usertcode-entry_id+72 = 'T'.
 wa-tcode = wa_usertcode-entry_id.
 wa-report = space.
 ELSE.
 wa-tcode = space.
 wa-report = wa_usertcode-entry_id.
 ENDIF.
 COLLECT wa INTO t_ut.
ENDLOOP.
SORT t_ut BY report ASCENDING.
CLEAR: wa, wa_result.
endform.
FORM get_fieldcatalog .
fcat-tabname = 't_ut'.
fcat-fieldname = 'DATE'.
fcat-seltext_l = 'Date'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'MANDT'.
fcat-seltext_l = 'Client'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'USER'.
fcat-seltext_l = 'User Name'.
fcat-key = 'X'.
APPEND fcat.
CLEAR fcat.
fcat-tabname = 't_ut'.
fcat-fieldname = 'TCODE'.
fcat-seltext_l = 'Transaction Code'.
fcat-key = 'X'.
APPEND fcat.
ENDFORM.
*& Form SET_LAYOUT
 text
--> p1 text
<-- p2 text
FORM set_layout .
layout-colwidth_optimize = 'X'.
ENDFORM. " SET_LAYOUT
*& Form GET_EVENT
 text
--> p1 text
<-- p2 text
*FORM get_event .
events-name = slis_ev_top_of_page.
events-form = 'TOP_OF_PAGE'.
APPEND events.
*ENDFORM. " GET_EVENT
**& Form GET_COMMENT
 text
--> p1 text
<-- p2 text
*FORM get_comment .
DATA: text(30).
text = 'Billing Report'.
heading-typ = 'H'.
heading-info = text.
APPEND heading.
*ENDFORM. " GET_COMMENT
**& Form top_of_page
 text
--> p1 text
<-- p2 text
*FORM top_of_page .
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = heading[]
I_LOGO =
I_END_OF_LIST_GRID =
*ENDFORM. " top_of_page
*& Form DISPLAY_DATA
 text
--> p1 text
<-- p2 text
FORM display_data .
sort t_ut[].
DELETE ADJACENT DUPLICATES FROM t_ut[] COMPARING ALL FIELDS.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = sy-cprog
 is_layout = layout
 it_fieldcat = fcat[]
 i_save = 'A'
 is_variant = variant
 it_events = events[]
 TABLES
 t_outtab = t_ut
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " DISPLAY_DATA

Application Parameters not working in the Transactional iViews

We had created transactional iViews for calling the standard SAP Transaction: IQS8 and IQS9. Here the issue is that we would like to populate the default screens for these 2 transactions with different set of default values.
So, we created variants and sending them as an application parameter to these trasnactional iViews. When we call this iView it is displaying these default values as per the variant which we are sending. But when executing that transaction, it seems those application parameters that we send through the iView are not being used to call that transaction.
How to enforce the transaction to make it use the application parameters as default values, does any one has any idea?
Please let me know if any one of you have a solution for this.

Hi Venkat,
You might want to try the following approach:
1- Create a new transaction code in your SAP system (using transaction SE93 - maintain transaction) which would be a transaction variant of the transaction you want to call with a specific variant
2- Create a 'SAP transaction' iview that points to the new transaction code you created (SAP information <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm">here</a>)
Hope this helps.
Regards,
Joseph

The system failed to flush data to the transaction log. Corruption may occur.

We have a windows server 2008 R2 Virtual machine and we are getting the following Warning Event.
Event 51 Volmgr
The system failed to flush data to the transaction log. Corruption may occur.
Any idea what is wrong with this server? Why this event is occurring?

Hi Jitender KT,
Before going further, would you please let me know the complete error message that you can find (such as a
screenshot if you can provide)? Please check and confirm in Event Viewer if there other related event you can find, such as Event 57 and so on. Meanwhile, can you remember what operations you have done before the warning occurred?
Based on current message that you provided, please run
Chkdsk command to check if you can find error. The issue seems to be related to the storage device. Please refer to the following similar question.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/044b10af-c253-46de-b40d-ce9d128b83d7/event-id-57-source-volmgr?forum=winservergen
In addition, please also refer to the following link. It should be helpful.
http://www.eventid.net/display-eventid-57-source-volmgr-eventno-8865-phase-1.htm
Hope this helps.
Best regards,
Justin Gu

Portal Runtime Error while checking the Transaction in Portal

Hi all,
We r in the phase of setting the configuration of Portal. We did the the template installer but when iam checking the transactions in Portal ( System Administration--> Support--->SAP Apllication) , it is throwing me the following error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Missing Property 'ClassName' in property file for layer'Transaction/WinguiSSOLayer'..
See the details for the exception ID in the log file
Can anybody help me in this regard.
Thank in Advance.

Hi Niyati,
I guess check through -->
Under "Personalize > User Profile" the checkbox "Activate Accessibility Feature" must be unchecked!
as, people earlier also faced this issue and SAP provided this solution.
Also an alternative solution for this is like --
Go to:
<Drive>\usr\sap\<SID>\JC<Instance No.>\j2ee\cluster\server<Server No.>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\portal\portalapps\com.sap.portal.appintegrator.sap\property\Transaction
and see the content of the 'WebGuiSSOLayer.properties' file.
One of the entries is ''ClassName'. The value on a 'valid' portal is: com.sapportals.portal.sapapplication.itsdetection.ITSDetectionLayer
If it's not the case, then go to:
<Drive>\usr\sap\<SID>\JC<Instance No.>\j2ee\cluster\server<Server No.>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd
rename the file 'com.sap.portal.appintegrator.sap.par.bak' to 'com.sap.portal.appintegrator.sap.par' open the par file and edit the file ''WebGuiSSOLayer.properties' (add the relevant entry for ClassName).
Save the file (still with the par extension)
Restart the portal (if everything is OK then the bak extension will be added to the filename).
Just try this, hope it works.
Reward points if helpful
Regards,
Shailesh Nagar
Edited by: Shailesh Kumar Nagar on Jan 22, 2008 7:16 AM

FBL3N Report -not able to get all the transaction code details

Hello,
when FBL3N report ran for one the expenses account (time paid off - project charges account) , only few line items are displaying the transaction code like CJ88 and CJ8G.
can you please tell me why all the line items are not showing the transactions codes and is there any know situation when the T- codes are not displayed.
What I need to do, to get all the T- codes in the report ?
I really appreciate your help.
Regards
Radha

I know it is a line item report and I was expecting to see the transaction code details in the report for every line item. But in I'm not able to see all T- codes for all the line items
Thanks
Radha

Doubt in layers of the Transaction

Hi Gurus,
Can anyone explain what is the difference between following 4 at the transaction level. How each individual will helpful in the transaction process....
1) Item Categories.
2) Item Category Group
3) Item Categories Usages
4) Item categories Determination.
With example is greatfull......
Regards,
Sap Adherent.
Moderation: Kindly search before you post

Hi Pepe,
Thanks for the response.
As you mentioned they have different statuses.
In the status profile they maintained the lower and higher values (1-10) for all the listed.
So, does this impacts the visibility of the drop down?
I thought that, it (high/low) only acts not to allow the user to change the statuses from bottom to top.
Regards,
Fedor.

Drill down facility which leads to a particular tab in the transaction

Hello Experts!
Could anyone help me on this please?
I am displaying a number of sales orders on an ALV grid. A user can double-click on a particular field say "partner no." of any sales order that is displayed. This should open the transaction crmd_order for that particular order number at the item level with the tab "Partner" being displayed. Is this possible? If yes, how do i go about implementing this? I am using OO concepts for the ALV display. Sample code will be greatly appreciated.
Thanks and Regards,
Smitha

*define this in the top include (declarations part).
*--- Local Class for event handling in ALV processing
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
 METHODS:
* Track the double_click event on ALV Grid
 handle_double_click
 FOR EVENT double_click OF cl_gui_alv_grid
 IMPORTING e_row e_column es_row_no.
ENDCLASS. "lcl_event_receiver DEFINITION
*& Class lcl_event_receiver Implementation
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_double_click.
** reads the alv table with the selected rows
 READ TABLE <name of the alv tab>_0100 INTO <structure of alvtab>
 INDEX es_row_no-row_id.
 IF sy-subrc = 0.
** set parameters for the initial values, like order number..etc..
** with the values in the structure of alvtab
** Call transaction CRMD_ORDER (skip intial screen if necessary).
 ENDIF.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
*Also, you need to set handler for the grid
data event_receiver TYPE REF TO lcl_event_receiver.
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_double_click FOR <enter grid control name here>.
Hope this helps.
Sajan Joseph.

ST22 , Need to get the Transaction and Pgm name using a FUNCTION MODULE ?

Hi All,
I need to create a Report for monitoring Dumps which is seen in ST22 every day.
The function module RS_ST22_GET_DUMPS gives the dump information . But i need to fetch the Program name and the transaction where the dump has happened for my report.(Like when we double click the alv output in ST22 and the next list gives us the complete information , Transaction , Main program name ...etc)
Kindly suggest me and help me on this .
Regards,
Richard A

Hi
Funcion module RS_ST22_GET_DUMPS will return the program names where the dump has taken place.
Pass this program name to function module RPY_TRANSACTION_READ to get the trascation code of the program.
Regards
Srilaxmi

Define event types in Customizing and restart the transaction.

how to define event to restart the transaction in BADI
I have given error message in badi. it is giving
No SAP Event Management communication for events; no event types def
    Message no. /SAPTRX/ASC084
Diagnosis
    You have not defined event types for the business process types.
    therefore not possible to communicate event data to SAP Event
    Management.
System response
    The communication of event data is aborted.
Procedure
    Define event types in Customizing and restart the transaction.

Hi Kevin,
What DataSource does your testalias refer to?
- If it is a custom DataSource, you must have created this custom DataSource also.
- If it is the default DataSource, you shouldn't have this problem in general...
In either case, you can try deploying your DataSource and/or DataSource alias together with your application:
http://help.sap.com/saphelp_nwce10/helpdata/en/45/07d2eeea3e0485e10000000a155369/frameset.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/45/c82cd460a42e96e10000000a155369/frameset.htm
I hope that helps!
Regards,
Yordan

Running BDC program in background for the transaction VL02N

Hi All,
I have coded a BDC program (call transaction method) for the transaction code VL02N. I can able to run the program manually & successfully. But if I execute the program in background(SM36), it is going to dump giving CNTL_ERROR.
Note: I am not using any of the GUI_UPLOAD, GUI_DOWNLOAD funciton modules in the program. But I am using the FTP command funtion modules like( FTP_COMMAND, FTP_CONNECT, FTP_DISCONNECT and FTP_SERVER_TO_R/3).
<removed_by_moderator>
Thanks in advance.
Ramesh.
Edited by: Julius Bussche on Jul 8, 2008 5:55 PM

VL02N is an enjoy transaction. You cant run it in background. Please try VL02.
Thanks
Romit

Predefined the Transaction S_ALR_87012284

Similar Messages

Maybe you are looking for