Preemptive forms getting in the way!
i want to name the album artist for an album "Ministry Of Sound" however when i type Mi it recognises another artist "MIA" and capitalises the m and i so when i continue to type i get "MInistry Of Sound".
any ideas? i don't want to turn it off because its useful most of the time, but this is really getting my goat!
Type in *xMinistry of Sound* then go back and delete the x.
Similar Messages
-
Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799 -
I have my a song purchased from Itunes and would like to use part of it for a ringtone and get all the way thur the process of getting it to my phone but it goes to sync to my phone it doesn't show up in my phone like it says it is suppose to under ringtones. Does anyone have any tips on how to do this.
http://osxdaily.com/2010/09/04/make-free-iphone-ringtones-in-itunes-10/
https://discussions.apple.com/message/17777381 - making a ringtone
Getting ringtones folder to show in iTunes - https://discussions.apple.com/thread/2629494 - iTunes > Preferences. Under the General tab below Show, confirm Ringtones is selected -
I am trying to install iTunes 10.7. The installation gets all the way to the end and says "removing application" then stops and gives me an error message that states there is a missing file and it cannot complete the configuration. Please contact my support or package dealer."
Confused - my old itunes worked fine - haven't removed any programs, etc.,
HelpTry the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
When restoring my backup from my old iphone via my computer to my new iphone, it gets all the way through the restore and then at the end it says there was an error and doesn't restore. Doesn't say what error.
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download
Also... See Here > Configure security software -
I am attempting to re sync my iPad2 with my macbook pro iTunes and i get all the way to where it tells me to connect to iTunes...which my iTunes on my macbook sees as connected, yet my iPad still tells me to connect to iTunes...AND yet it is connected..HELP
Your iPad is going to show "Connect to iTunes" screen until you either set it up successfully or restore it. If you've already set your iPad up in the past, "Connect to iTunes" typically indicates the iPad is in Recovery Mode and you must restore it.
-
Hotspot wifi - other wifi getting in the way
I have this annoying problem. All sorts of wifi signals get in the way of my iPhone, which tries to connect to them instead of staying on 3G. I clearly see the message "wifi not available while your phone is a hotspot", but my iPhone seems to be trying to connect to them anyway. This slows it down a lot.
(when away from home and not using it as a a hot spot, I just turn wifi off)
Thank youYour phone is malfunctioning if it's trying to join WiFi networks when Personal Hotspot is enabled (defeating the Hotspot function). Do the basic troubleshooting steps as described in the User Guide, Appendix B (and elsewhere)
Restart phone
Reset phone
Settings > General > Reset > Reset Network Settings
Restore in iTunes using a backup
Restore in iTunes as new, without using a backup.
There are a couple of things that are unclear from your first post, confusing the issue:
"when away from home and not using it as a a hot spot, I just turn wifi off"
Why do that if you have access to free WiFi?
Also, if you have access to external WiFi, why use your phone (and data plan) as a personal hotspot when you can connect whatever other device you're using directly to that WiFi source? -
Why doesthe start menu stays on and gets in the way of controls when viewing a video full screen?
Since I updated my firefox when ever I try to watch a youtube or other video full screen my start menu stays up at the bottom of the page and gets in the way preventing me from adjusting the volume or finding a specific spot in the video without first downsizing the video using the ESC key. Why is this? It does not happen when I use Internet Explorer.
You can check the settings of the Windows Taskbar via the right-click context menu and make sure that it isn't set to always show on top.
-
Just downloaded book but did not get all the way down now cant play it any answers
just downloaded book but did not get all the way down now cant play it any answers
in iTunes, access your purchase history via your account in the iTunes store, find the file in question, and click on the report a problem button. report the problem. more info in this support article.
clicking here should take you directly to your iTunes store log-in window. -
I tried to download an app an it gets all the way to the installing part an it quits an will not finish downloading. What do I do??
You won't be able to change your rescue email address until you can answer 2 of your questions, you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
Asked previously but no replies so far which has surprised me as it must be something others have come across - it's so obvious and 'in your face': Is it possible to delete the blue bordered box which comes as default and centred on the A4 page whenever I create a blank pdf to add fields to - or indeed convert an existing pdf. It won't allow me to delete it, isn't a text box and just gets selected anytime I try to select anything near it!
Many thanks in advance to anyone who can answer this crazy problem.Hi Gilad,
thankyou! - yes it seems though I was using the text tool when I had this problem: When I had created a few fields in the 'form edit' mode I then may later have added some normal 'comment' fields of text in the normal mode to highlight certain aspects on a form - I used the text tool thinking that was the right way in to add or edit text - I can now see I double click with the hand tool to still be able to access any text field I want to. Yay!
Many thanks for your kind assistance - I shall try this method later on a new form I was trying to create and which was giving me grief.
One last thing then: what is that default text field that can't be deleted actually for - why is it there? After all, a 'blank pdf' should surely be a truly blank pdf? Perhaps this is one for mighty Adobe....?
Kind Regards,
Pete -
I'm a gamer and I play in windowed mode, and every now and then this gets in my way of playing. It's super annoying and I have to either close out Firefox or move my taskbar to the top, which isn't optimal.
I'd like to be able to play in windowed mode, with a browser open if I so need, without accidently hovering over it and causing this stupid tooltip to block the spells I need to use.
http://i55.tinypic.com/10e25xe.jpg
That's what I'm talking about.
I use Windows 7.
I've disabled the thumbnail previews.
All other taskbar icons have the registry edit that extends hover time so that I have to hover for a long time for it to display, so it's fine.
I've tried the Firefox about:config where I disable the browser.chrome thingy and those things related to that.
Is there any way to get rid of this display that when you hover over the web browser it tells you the name of the page you're on?Wade and Monica,
Thanks for your help.
Wade, it hit me when you asked "why is it a png" file and I realized that I was using the wrong file. Sometimes its hard to see the forest for the trees! Problem for banner artwork fixed and I have now used the correct logo file so no more dotted line.
The dotted line only appears on the the png version of the logo. There's no coloured background on the logo file. She gave me the file as both an eps and a png file. I'm pretty sure she created the logo in Illustrator. I've been using the png file for the website, which is what I thought it worked well for. And the eps one for my print materials.
I have no clue why I grabbed the png instead of the eps logo file I usually use, but thanks for pointing out the obvious since I wasted time trying to fix it and was getting very frustrated at what had suddenly gone "wrong".
I still have that dotted line on the png file of the logo but I'll have to figure that out another day.
Thanks again!
Hasmi -
So my iPhoto told me to restore my library from a backup due to a problem with the file. First, there wasn't enough space so I deleted all kinds of stuff. I finally got it to restore and then it told me it needed to repair, thumbnmails, etc. It gets almost all the way to the end and then it tells me the file is damaged and to restore from a backup. It is like I am in an endless loop and I can't get to my photos. HELP ME
I restored it again last night. After the restore I have 52 GB left of space. The library is 71 GB. I opened iphoto and it says there are inconsistencies and it needs to repair. It is doing the repair now. What usually happens is that it does the repair and then starts the rebuild thumbnail part and gets to the very end of that before failing
-
Win QT7 & interactive movies : Internet explorer gets in the way reasonless
A problem when trying to see interactive quicktime movies in windows QT7 :
each time i click on an active zone on the movie, i get an error message telling me that Internet Explorer can't find the movie(path). and a blank IE window opens.
Other than that the movie reacts and plays fine, but each click on it makes it necessary to click twice in order to keep viewing the content (once for dissmissing the dialog box, an one other to close the appearing IE window)
therefore it's absolutely un-usable.
I urgently need a fix for that : the movies are all made on a mac with keynote, and this issue is not codec-related.
For mysterious reasons, IE thinks it's involved when a click is made on the movie...
On the other hand, opening the same movie INSIDE an IE windows through the IE plug-in works like a charm.
But the CDs i Design are autorun and use quicktime, not IE, i can not tell my clients they have to go though the harrassing steps to get to the movie file and open it manually in IE (plus they where designed to be full screen...)
It worked fine with QT6 (but for many a reasons i need my clients to have QT7 installed)
HEEEEEEEEElP !Have you sent feedback?
This is a problem that affects Keynote users as well, so they've been sending feedback. If the problem is easily reproducible (and it is) so that they don't need additional information form you, you'll probably not receive any response.
These forums are for user to user support only, so that's why you won't get any response from Apple here. -
I have 2 iphones,one with a sim card installed and one without.Before I upgraded to ios 8 I received Imessages on both,however this is no longer possible because it asks me for a code for forward text messaging that I am unable to get.I HAVE THE SAME APPLE ID ON BOTH.Can this be fixed?
Hi mopster555,
Thanks for the question. If I understand correctly, you are not receiving messages on two iOS devices. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iOS: Troubleshooting Messages - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario
Maybe you are looking for
-
I need help, speach over got accidently turned on in my Iphone 6, now i cant get into my phone it wont take my pass word and when I try to use Siri it says not available what do I do
-
Im trying to get an audigy one platinum working with windows vista. I got the vista drivers from the creative website and installed. No problem. However i noticed the 'breakout box' in my dri'vebay wasnt working. So i checked device manager and I've
-
Hi All While creating a service requisition ( item category D), the material group field on the item level is a required entry. Is there a I can make the material group field as optional. In "Defining screen layout at document level" we have the mate
-
XI adapter Engine message archiving
HI We are trying to archive th messages in the AE in the XI box. This is somehow not clickng. we have performed the DAS functions and also tried to schedule jobs from the RWB. Still the data is not archived as the job logs show that there is no recor
-
ACL blocking traffic towards the management interface on WLC 5508
Hello All, I need to apply an ACL in WLC 5508 such that it would allow https traffic on management interface only from selected clients. For same, I have created an ACL permitting only the intended users while blocking the rest. Have applied the sam