Preference Processing: Not able to see PO in Manage Vendor Declaration

Hello All,
I have completed below activities for Preference Processing
1) Material transferred from Feeder to GTS
2) Material Prices & Procurement indicators transferred to GTS
3) BOM Transferred to GTS
4) Material and all BOM item classified
5) Preference indicators and LTVD details are maintained in Product master in GTS
Now I have create a PO for Raw material and the PO is transferred to GTS but i am not able to see the PO in path /SAPSLL/MENU_LEGAL --> Risk Management --> Preference Processing --> Manage Vendor - Based Vendor Declaration --> Display worklist.
Have i missed any configuration?
Awaiting for positive reply
Thanks & Regards
Rahul

It doesn't sound as much that you missed something as it does you'd done one step too many.
In step 5 where you say you have maintained preference/ltvd status in the MM; that's why you wouldn't be seeing your PO listed under 2014 in pref processing. Since you've already manually maintained it's status, you've basically bypassed the need for that PO this year.
If you change the year in Preference Processing however, you should see your PO listed for the FTO in question for 2015. Without the manually maintained material status in place, this material/vendor combination should be relelvant for request with the year pushed out.
Thanks,

Similar Messages

Not able to see task of BPM process in UWL

Dear all,
I am not able to see my task in Portal UWL and getting an error in UWL workset saying, an error occured while trying to connect to provider and detail message says - Unexpected error occured: XMLParser: No data allowed here (:main:, row:6, col:2)
In the Portal Log i can see following error message -
process()
[EXCEPTION]
com.sap.engine.interfaces.webservices.runtime.ProtocolExceptionExt: Authentication failed. For details see log entry logID=0021288C0230293F0000000500006EB3 in security log.
at com.sap.engine.services.wssec.srt.protocols.ProviderSecurityProtocol.logThrowable(ProviderSecurityProtocol.java:1178)
at com.sap.engine.services.wssec.srt.protocols.ProviderSecurityProtocol.handleRequest(ProviderSecurityProtocol.java:527)
at com.sap.engine.services.webservices.espbase.server.runtime.ProtocolProcessor.protocolsHandleRequest0(ProtocolProcessor.java:95)
at com.sap.engine.services.webservices.espbase.server.runtime.ProtocolProcessor.protocolsHandleRequest(ProtocolProcessor.java:70)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:483)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process(RuntimeProcessingEnvironment.java:322)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWOLogging(ServletDispatcherImpl.java:199)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:65)
at com.sap.engine.services.webservices.servlet.SoapServlet.doPost(SoapServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
I am using Portal 7.2 with SP level 08.
Thank and Regards,
M.D.Sahu

Hi Mithileshwar,
Start BPM Process Trigger - Read timed out
Regards,
V Srinivasan

On RZ04 (I am not able to see my spool work process in the list...)

Hi Friends,
I am using ECC6. I have defined 7 (4 dialog, 2 background, 1 spool) work processes on dialog instance.
Now I am trying to define operation mode using rz04. But when I define the number of dialog and background work porcess according to day time or night time. I am not able to see my spool work process in the list. It looks like:
OP Mode______________Dia______BP______BPA______Spo______Upd______Up2______Enq______Sum
B30_AS_Day____________4______3________________________________________________________7
B30_AS_Night___________3______4________________________________________________________7
Please ignore the underline ( It is just for formatting the output).
Please tell me how can I resolve this issue.
Thanks

Hi Tiago,
Yes, I have set the rdisp/wp_no_spo on the instance profile and restarted the instance after update.
Now, I check the value of rdisp/wp_no_spo in RZ11.
It shows like:
Dift value______   0
ProfileVal______    1
Current value____   1
So, Plesae tell me how to resolve this issue.
Thanks & Regards
Ajay Saini

Not able to see the request in ODS to activate

Hi all,
I have a content ODS, i scheduled a infopack and the data came in thru ok. But inorder to upload the data into the cube, i know i need to activate it before. But when i rightclick and go to activate data in the context menu .. there is a popup which shows all the request id's in the ODS. but i'm not able to see my request to activate it ... Is there some flag has to be set inorder to see the requests in the activation list? once its activated, I think all i need to do is "UPDATE ODS DATA TO DATAPROVIDER" as it is a standard content. Is there something else i need to do ..Pls guide.
Now, I have a new problem, when i'm trying to see the transfer structure, it doesnt open and i get a msg
Transfer method 'TRFC with PSA' is not supported by the source system
Diagnosis
The PSA transfer method is used to transfer data from source system CRM to transfer structure 0xxx_xx_xx_I_BB. Source system CRM does not support a PSA transfer.
Procedure
Define the PSA in the source system.
Its actually a content one i installed and i didnt do any customizations to it... Shouldnt it work out of box? If no!! how can i define PSA in the source system.
Any help is appreciated.
Mav.

Hi Mave,
Kindly check the following:
1.) Are you sure that the loading process finished successfully in the ODS? Kindly ensure it did.
2.) Have you tried providing a longer <b>Date Range</b> in the <i>Request Display</i> (lower right).
--Jkyle

Users not able to see remote users on the node network

Users that belong to one node are not able to see users in another calendar
server node. Both calendar servers are pointing to the same directory server.
Some errors that occur in the log files:
DEXOTEK ERRCODE Ox13608 -> SchedBaseOpen: Section name too long
DEXOTEK ERRCODE Ox13608 -> OpenConnection: SchedBaseOpenOnHost
And when uninode -cws nodeID is run, it does not report being able to see all
the users and resources on the remote nodes.
uninode: connected to hostname.net.xxx.com, node 10000
directory of items: 10 (USERS = 10/RESOURCES = 0)
CONNECTION EX AV Q-SIZE IN-PROCESS IMPORT-DIR
(10000)->xxxxxx.xxx.com(10001) 2 2 0 0 370 (U=370/R=0)
Here is the nodes.ini file:
+ H=xxxxxxx.xxx.com/N=10000
+ H=xxxx.xxx.com/N=10001
all=2
There is a reported bug, that 16 chars is max on domain names for the nodes.ini
file, which means that you need to change that file and use:
     a) an alias that can be resolved on the network with either DNS or local
     host files
     b) use the IP address.
As documented in the release notes, here is the procedure on how to modify the
hostname when it is too long. Or how to modify the hostname for any reason.
Fix for long host names problem
If the fully qualified domain name for your network exceeds 16 characters, it
will be necessary to shorten the host name of all the servers in the Calendar
Server network . These instructions must be carefully followed to avoid causing
problems with the network. Ensure that the procedure is applied to ALL nodes in
the Calendar network.
1) The following procedure should be carried out on each server in the
Calendar network:
a) Bring the Calendar services down.
% unistop -y
b) Run the unidbfix command in export mode.
% unidbfix -export -n node-id
This will create a remotenode.ini file for each node on the server. The file is
located in the node's perm directory.
Example:
If you have two nodes on the server ROCK, node 1(in N1) and node (in N2), the
files are:
/users/unison/db/nodes/N1/perm/remotenode.ini
/users/unison/db/nodes/N2/perm/remotenode.ini
The remotenode.ini file will look something like this:
[1]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni2"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
[2]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni4"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
2) Once you have run unidbfix in export mode on all the servers, proceed as
follows:
a) Compare the remotenode.ini files and verify that the entries are the
same. In each file, you will note that an entry for the local node is not
included.
b) Edit one of the files (on any of the servers). This file will be
referred to as the master file. Add the appropriate entries for the
local node (copy the section from one of the other files). Modify the
RN_HOSTNAME in each of the sections of the master file to shorten the
name.
c) Copy the master file in the perm directories of each node on all the
servers.
3) Once the master file is in the perm directory of all the nodes, proceed as
follows on each server:
a) Run the unidbfix command in the -import mode.
% unidbfix -import -n node-id
b) Edit the nodes.ini file on the hub server and make the same changes to
the host names. You do not need to apply the changes.
c) Edit the [UTL] section of the /users/unison/misc/unison.ini file and
change the host name.
d) Start up the services.
% unistart
4) After all the changes have been made, run the uninode -cws all and
uninode -snc all commands and verify that the results are accurate.

See this:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8203.html
You should then see your pcs listed in Finder's sidebar under the shared section.
Regards

Not able to see the Service Desk Message in "Solution_Manager"

Hi Gurus,
Can anyone help me solving my problem,
We are using Solution Manager 4.0, and want to implement service desk for our systems. I have configured the solution manager service desk and we are able to rise the message from satellite system to solution manager, but i am not able to see those messages in "solution_manager" transaction under service desk in solman, but those messages are reflecting in transaction code "dnotifwl" under "No Processer assigned" option of Personal selection>Notifications Tab.
Pease guide me to resolve the problem.
Thanks,
Krishna.J

Hi Nico Effenberger ,
Thanks for ur reply,
1.have not copied slfn to zslf but modified the entries of slf1 and using directly. When i try to copy either it is copying only the entries or saying Entry zslf does not exists in DNOC_TYPE_NOTIF.
2. I am having full authorisation sap_all, and sap_new for my system
3. yes i have created a slfn based on this slf1 messages.
It will be very helpfull if you could send me any doc related to solman service desk configuration you have done.
thanks & regards
Krishna Joish

Not able to see list of Plan applications when click on Navigate- Applica

Hi,
Somehow I am not able to see list of Planning applications when clicking on on Navigate->Applications->Planning from Workspace within Planning 9.3.1. Is there an Internet settings that I would need to change in order to see the list of applications. It seems like there are something disabled within my internet options or within my preferences.
Could someone please help?
Thanks.

Hi,
Is it just yourself that is experiencing this issue.
Are you using IE7, If so
Tools -> Internet Options -> Security -> Custom Level -> Allow script-initiated windows without size or position constraints
Otherwise it could be that you have not been given access.
Cheers
John
http://john-goodwin.blogspot.com/

Merging Patch,after that not able to see column in Presentation layer

Hi,
I am using rpd 11.1.1.5.0 and created patch done for modifications,after merging to original repository not able to see new derived columns in Presentation layer,able to see in BMM and Physical layer.
Little bit urgent as client need to see reports.
Thanks
Karthik

Thank you.... so much.
Solution: clear preferences in home library ~/Library
Preferences> com.apple.Safari.plist

Vendor not able to see bid invitations created one day before

Hi friends,
We are workig with SRM5.0 SP08. I have observed that vendors are not able to see bid invitations processed one day before.
Could you pls suggest the probable reason, if anybody has come across similar problem? Bid invitation version is active and can be seen with purchasers login.
Your responses will be highly appreciated.
Regards,
Prashant

Hi Marcin,
all these bid invitation statuses are not closed. its published only. The problem is bidder is not able to see bid invitations with dates in the past.
Dinesh,
Ur right. There is also problem with search functionality. In fact I can display list of bid invitations only if I am not giving any search criteria.
Regards,
Prashant

Not able to see any of the application,system windows in jdev

Hi everyone,
I am facing a strange problem in jdev 10.1.3.1.I am not able to see any of the application,system and other window.I tried clicking the view button in the toolbar and clicking on the application and system navigator to show off in the window,but there was no luck.I continue to see a blue screen.Even i deleted the jdev10.1.3.1 and installed again the new jdev10.1.3.1 but still then its not showing me the windows.When i tried to explore more clicking Tool->Preferences it gave me the following exception:
java.lang.NullPointerException
     at oracle.tip.tools.ide.tx.addin.MapperOptionsPanel.load(MapperOptionsPanel.java:412)
     at oracle.tip.tools.ide.tx.addin.MapperOptionsPanel.onEntry(MapperOptionsPanel.java:400)
     at oracle.ide.panels.MDDPanel.enterTraversableImpl(MDDPanel.java:926)
     at oracle.ide.panels.MDDPanel.enterTraversable(MDDPanel.java:899)
     at oracle.ide.panels.MDDPanel.mav$enterTraversable(MDDPanel.java:106)
     at oracle.ide.panels.MDDPanel$Tsl.updateSelectedNavigable(MDDPanel.java:1348)
     at oracle.ide.panels.MDDPanel$Tsl.updateSelection(MDDPanel.java:1216)
     at oracle.ide.panels.MDDPanel$Tsl.actionPerformed(MDDPanel.java:1210)
     at javax.swing.Timer.fireActionPerformed(Timer.java:271)
     at javax.swing.Timer$DoPostEvent.run(Timer.java:201)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
     at java.awt.Dialog$1.run(Dialog.java:515)
     at java.awt.Dialog.show(Dialog.java:536)
     at java.awt.Component.show(Component.java:1300)
     at java.awt.Component.setVisible(Component.java:1253)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:55)
     at oracle.ide.panels.TDialogLauncher.showDialog(TDialogLauncher.java:276)
     at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:597)
     at oracle.ide.config.IdeSettings.showDialog(IdeSettings.java:391)
     at oracle.ide.cmd.IdeSettingsCommand.doit(IdeSettingsCommand.java:47)
     at oracle.ide.controller.CommandProcessor.invoke(CommandProcessor.java:259)
     at oracle.ide.controller.IdeAction.performAction(IdeAction.java:541)
     at oracle.ide.controller.IdeAction$1.run(IdeAction.java:772)
     at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:789)
     at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:498)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
     at java.awt.Component.processMouseEvent(Component.java:5488)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
     at java.awt.Component.processEvent(Component.java:5253)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3955)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1774)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
I dont have any clue on this.
Please help me in resolving the problem and finding some solution to this.
Thanks & regards

Try and see if this helps:
http://blogs.oracle.com/shay/2006/11/10
Although it seems that just removing JDeveloper and reinstalling from scratch should have done this.

Not able to see iby_fd_extract_ext_pub custom tags of in XML data

Hi Experts,
I have customized the iby_fd_extract_ext_pub package to add the custom tags in the payment format xml data.Package status is valid but I am not able to see any of the custom element in the XML Data.
Please share your experience if you faced similar issue.
Regards,
Brajesh

1. Do not prefix it just put your code in and compile - unless you want to call XX_IBY_FD_EXTRACT_EXT_PUB from IBY_FD_EXTRACT_EXT_PUB to have minimal impact to IBY_FD_EXTRACT_EXT_PUB.
2. You won't be able to put in an additional parameter, you'll need to derive the Payment Process Profile from SQL by linking from payment document to payment process to payment process profile; or just get the org from, say, the first invoice in the batch - as long as you always group by organization this will be fine.
3. Yes, it is probably that a patch will overwrite your customization - make sure you test it after each IBY patch - use applcust.txt and make sure your DBA's check adpatch logs for the file being overwritten!
Regards,
Gareth
http://garethroberts.blogspot.com
http://www.virtuate.com

Not able to see scope Compensate

HI ,
i am using Bpel 1.1
I have created two Services one is Flight Booking Service,another is Hotel booking Service,i have implemented compensation. i have raised exception thorough the "Throw", i used catch all to hold the this exception.in that catch i have i used Compensate , to roll back the booked services,
but in the Compensate i am not able to see the scopes of the Airline,HotelScopes.
Below is my Travlmgmt.bpel in whihc i have used the two services:
<?xml version = "1.0" encoding = "UTF-8" ?>

<process name="TravlMgmt"
         targetNamespace="http://xmlns.oracle.com/AirLine_Booking/TravelPlan/TravlMgmt"
         xmlns="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
         xmlns:client="http://xmlns.oracle.com/AirLine_Booking/TravelPlan/TravlMgmt"
         xmlns:ora="http://schemas.oracle.com/xpath/extension"
         xmlns:bpelx="http://schemas.oracle.com/bpel/extension"
         xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
         xmlns:ns1="http://xmlns.oracle.com/AirLine_Booking/Hotel/HotelBooking"
         xmlns:ns2="http://xmlns.oracle.com/AirLine_Booking/Project1/AirlineBooking"
         xmlns:bpel2="http://docs.oasis-open.org/wsbpel/2.0/process/executable">

<partnerLinks>
    
    <partnerLink name="travlmgmt_client" partnerLinkType="client:TravlMgmt"
                 myRole="TravlMgmtProvider"/>
    <partnerLink name="Hotel_Service" partnerLinkType="ns1:HotelBooking"
                 partnerRole="HotelBookingProvider"/>
    <partnerLink name="Flight_service" partnerLinkType="ns2:AirlineBooking"
                 partnerRole="AirlineBookingProvider"/>
</partnerLinks>

<variables>
    
    <variable name="inputVariable"
              messageType="client:TravlMgmtRequestMessage"/>
    
    <variable name="outputVariable"
              messageType="client:TravlMgmtResponseMessage"/>
    <variable name="Invoke_AirLine_Book_InputVariable"
              messageType="ns2:AirlineBookingRequestMessage"/>
    <variable name="Invoke_AirLine_Book_OutputVariable"
              messageType="ns2:AirlineBookingResponseMessage"/>
    <variable name="Invoke_Hotel_HotelBook_InputVariable"
              messageType="ns1:HotelBookingRequestMessage"/>
    <variable name="Invoke_Hotel_HotelBook_OutputVariable"
              messageType="ns1:HotelBookingResponseMessage"/>
    <variable name="Invoke_Flight_Cancel_Cancel_InputVariable"
              messageType="ns2:AirlineCancelRequestMessage"/>
    <variable name="Invoke_Flight_Cancel_Cancel_OutputVariable"
              messageType="ns2:AirlineCancelResponseMessage"/>
    <variable name="Invoke_Hotel_Cancel_HotelCancel_InputVariable"
              messageType="ns1:HotelCancelRequestMessage"/>
    <variable name="Invoke_Hotel_Cancel_HotelCancel_OutputVariable"
              messageType="ns1:HotelCancelResponseMessage"/>
    <variable messageType="bpelx:RuntimeFaultMessage" name="FaultVar"/>
    <variable messageType="bpelx:RuntimeFaultMessage" name="FaultVar_1"/>
</variables>
<faultHandlers>
    <catchAll>
      <sequence name="Sequence6">
        <compensate name="Compensate1" />
        <compensate name="Compensate2" />
      </sequence>
    </catchAll>
</faultHandlers>

<sequence name="main">
    
    <receive name="receiveInput" partnerLink="travlmgmt_client"
             portType="client:TravlMgmt" operation="process"
             variable="inputVariable" createInstance="yes"/>
    <flow name="Flow_of_Hotel_Flight">
      <sequence name="Sequence">
        <scope name="Scope_Airline" variableAccessSerializable="yes">
          <bpelx:annotation>
            <bpelx:general>
              <bpelx:property name="userLabel">AirLineScope</bpelx:property>
            </bpelx:general>
          </bpelx:annotation>
          <compensationHandler>
            <sequence name="Sequence4">
              <assign name="Assign_Airline_Cancel">
                <copy>
                  <from variable="Invoke_AirLine_Book_OutputVariable"
                        part="payload" query="/ns2:BookingResponse/ns2:PNR"/>
                  <to variable="Invoke_Flight_Cancel_Cancel_InputVariable"
                      part="payload" query="/ns2:CancelRequest/ns2:PNR"/>
                </copy>
              </assign>
              <invoke name="Invoke_Flight_Cancel"
                      inputVariable="Invoke_Flight_Cancel_Cancel_InputVariable"
                      outputVariable="Invoke_Flight_Cancel_Cancel_OutputVariable"
                      partnerLink="Flight_service" portType="ns2:AirlineBooking"
                      operation="Cancel" bpelx:invokeAsDetail="no"/>
              <assign name="Assign2">
                <copy>
                  <from variable="Invoke_Flight_Cancel_Cancel_OutputVariable"
                        part="payload" query="/ns2:CancelResponse/ns2:Status"/>
                  <to variable="outputVariable" part="payload"
                      query="/client:processResponse/client:Status"/>
                </copy>
              </assign>
            </sequence>
          </compensationHandler>
          <sequence name="Sequence2">
            <assign name="Assign_AirLine">
              <copy>
                <from variable="inputVariable" part="payload"
                      query="/client:process/client:FlightNumber"/>
                <to variable="Invoke_AirLine_Book_InputVariable" part="payload"
                    query="/ns2:BookingRequest/ns2:FlightNum"/>
              </copy>
              <copy>
                <from variable="inputVariable" part="payload"
                      query="/client:process/client:CustomerName"/>
                <to variable="Invoke_AirLine_Book_InputVariable" part="payload"
                    query="/ns2:BookingRequest/ns2:Name"/>
              </copy>
            </assign>
            <invoke name="Invoke_AirLine"
                    inputVariable="Invoke_AirLine_Book_InputVariable"
                    outputVariable="Invoke_AirLine_Book_OutputVariable"
                    partnerLink="Flight_service" portType="ns2:AirlineBooking"
                    operation="Book" bpelx:invokeAsDetail="no"/>
            <assign name="Assign1">
              <copy>
                <from variable="Invoke_AirLine_Book_OutputVariable"
                      part="payload" query="/ns2:BookingResponse/ns2:Status"/>
                <to variable="outputVariable" part="payload"
                    query="/client:processResponse/client:Status"/>
              </copy>
            </assign>
          </sequence>
        </scope>
      </sequence>
      <sequence name="Sequence1">
        <scope name="Scope_Hotel" variableAccessSerializable="yes">
          <bpelx:annotation>
            <bpelx:general>
              <bpelx:property name="userLabel">HotelScope</bpelx:property>
            </bpelx:general>
          </bpelx:annotation>
          <compensationHandler>
            <sequence name="Sequence5">
              <assign name="Assign_Hotel_Cancel">
                <copy>
                  <from variable="Invoke_Hotel_HotelBook_OutputVariable"
                        part="payload"
                        query="/ns1:processResponse/ns1:ConformationCode"/>
                  <to variable="Invoke_Hotel_Cancel_HotelCancel_InputVariable"
                      part="payload"
                      query="/ns1:CancelRequest/ns1:ConfirmationCode"/>
                </copy>
              </assign>
              <invoke name="Invoke_Hotel_Cancel"
                      inputVariable="Invoke_Hotel_Cancel_HotelCancel_InputVariable"
                      outputVariable="Invoke_Hotel_Cancel_HotelCancel_OutputVariable"
                      partnerLink="Hotel_Service" portType="ns1:HotelBooking"
                      operation="HotelCancel" bpelx:invokeAsDetail="no"/>
              <assign name="Assign4">
                <copy>
                  <from variable="Invoke_Hotel_Cancel_HotelCancel_OutputVariable"
                        part="payload" query="/ns1:CancelResponse/ns1:Status"/>
                  <to variable="outputVariable" part="payload"
                      query="/client:processResponse/client:Status"/>
                </copy>
              </assign>
            </sequence>
          </compensationHandler>
          <sequence name="Sequence3">
            <assign name="Assign_Hotel">
              <copy>
                <from variable="inputVariable" part="payload"
                      query="/client:process/client:HotelName"/>
                <to variable="Invoke_Hotel_HotelBook_InputVariable"
                    part="payload" query="/ns1:BookingRequest/ns1:HotelName"/>
              </copy>
              <copy>
                <from variable="inputVariable" part="payload"
                      query="/client:process/client:CustomerName"/>
                <to variable="Invoke_Hotel_HotelBook_InputVariable"
                    part="payload" query="/ns1:BookingRequest/ns1:PersonName"/>
              </copy>
            </assign>
            <invoke name="Invoke_Hotel"
                    inputVariable="Invoke_Hotel_HotelBook_InputVariable"
                    outputVariable="Invoke_Hotel_HotelBook_OutputVariable"
                    partnerLink="Hotel_Service" portType="ns1:HotelBooking"
                    operation="HotelBook" bpelx:invokeAsDetail="no"/>
            <assign name="Assign3">
              <copy>
                <from variable="Invoke_Hotel_HotelBook_OutputVariable"
                      part="payload" query="/ns1:processResponse/ns1:Status"/>
                <to variable="outputVariable" part="payload"
                    query="/client:processResponse/client:Status"/>
              </copy>
            </assign>
          </sequence>
        </scope>
      </sequence>
    </flow>
    <throw name="Throw1" faultName="bpelx:remoteFault"
           faultVariable="FaultVar_1"/>
    
    <reply name="replyOutput" partnerLink="travlmgmt_client"
           portType="client:TravlMgmt" operation="process"
           variable="outputVariable"/>
</sequence>
</process>

by manually specifying the scope name in the compensation activity it is solved

Not able to see the TPZ files

Hi,
Please help.
I am facing a problem while transporting a request to Production environment. I am using File Level Transport. When I create a transport file, it is successfully created in development system's /export location. Basis team moves the file production system's /import directory.
But here I am not able to see the imported tpzfile via Tool->import design objects , in Production environment.

Hi,
Please find below from sap help.
After a successful import, the Integration Builder moves the imported TPZ files into the directory <systemDir>/xi/repository_server/importedFiles. The support package stack of imported software component versions is displayed on the Details tab page for the relevant software component version in the Integration Builder. If an error occurs, this information is important for support. Take one of the following precautions to retain the overview of the imported XI content:
● If the release and the support package stack are clear from the file name of the TPZ file, simply leave the files in the directory importedFiles (see above).
If a file with the same file name already exists in the directory importedFiles, the Integration Builder adds the date and time of the import to the file name of the imported export file. This enables you to check which file was imported last.
● After a successful import, you can keep the packed files, from whose naming convention you can derive the support package stack. Move them into the directory importedFiles, for example.
If version conflicts occur during the import, you can process and resolve them in the Enterprise Services Builder. In the case of corrupt export objects, you can force the import and skip objects that cannot be imported. The import is then incomplete and references to objects that are not imported are lost.
Regards,
Venkata S Pagolu

Not able to see write statements in spool

Hi,
    When i'm executing a bdc program using call transaction in background i'm not able to see the write statements in the spool.Please let me know if there is anything which should be done to send the write statements to spool.
thanks in advance,
poornima

Hi poornima
The best way to do is store it in memory once your BDC is done use FMs to do the writing process .
CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
      listobject       = l_abap
EXCEPTIONS
NOT_FOUND        = 1
OTHERS           = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
LIST_INDEX               = -1
WITH_LINE_BREAK          = ' '
IMPORTING
LIST_STRING_ASCII        =
   TABLES
     listasci                 = ascitab
     listobject               = l_abap
EXCEPTIONS
EMPTY_LIST               = 1
LIST_INDEX_INVALID       = 2
OTHERS                   = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Writing Messages
LOOP AT ascitab FROM 6.
    WRITE: ascitab-line.
ENDLOOP.
Regards
Hitesh

Not able to see published task and not able to reset version for the task

Hi,
Created a task ,validated,by selecting the task clicked Publish button in tools to publish the task.
In Client Application(Callcenter) navigated Administration-Business Process->Task Deployment
Here not able to see published task to activate.
Tried twice by copying record but not able to see.
I am not able to reset version for the task created.
Could you please let me know how to overcome these.
Using sample database of siebel8.0.0.5
Thank you

Hi Dude,
To trobleshoot this you need to do the following steps:
1) cross check in tools the srf which you are compling , the same srf should be used by the clent application i.e. call center
2) the secound thing is in the Siebel tools there is a toolbar at the top, from where you have published the task, there beside you will find a button called Revise you can revise you task, first select task and click revise button.
3) and also you remember a task which you create is validated by right clicking the task record and choose validate.
4) remember, a task which you create should be registered same as like responsibilities, by navigating to Administration-Applicatrion > Task
Register the task with same name as you have used in Siebel Tools.
As, for best practices after creating a task first validate it, then after register it in Administration-Applicatrion > Task , then after toolbar there is a button callled publish and activate click that one .
and that's All.
Regards,
Neeraj Verma

Preference Processing: Not able to see PO in Manage Vendor Declaration

Similar Messages

Maybe you are looking for