Preferences advanced network connection configure button missing
Checking preferences > advanced > network > connection > configure how Firefox connects to the internet, found that the "settings" button did not appear. Also, the "encryption" tab on the far right was gone.
Most recent changes were to install addons Certificate Patrol and Perspectives. I reverted to a profile saved before they were installed but that made no difference. The troubleshooting data below is without the two addons.
Thanks for the quick response. To answer the first question, the window can't be resized, at least on 10.5. Macs are cranky about such things.
I had been working on isolating the problem since posting the question. It is in my userChrome CSS running under Stylish; so the problem is either the CSS or Stylish or Stylish Custom. In any event not some external thing, which was my main concern. I'm sure that this did not occur with previous combinations of Firefox, userChrome, and the two extensions. The problem may never be fixed, but can be circumvented by just disabling the CSS when needed.
Sorry to have stirred up things, but it was a troubling phenomenon.
Similar Messages
-
Airport Express.
My network suddenly not showing up. Openend system preferences/Network & my network is there. When I open Airport Utility, most option are grayed out except "configure other" with no change. Utility does not provide option for setup assistant where I could just start over. So no wifi without network set up and can't use ethernet/router to troubleshoot. I am stuck any assistance helpful.So I went back to the PC after my original post, and somehow I was able to connect to the AirPort wireless network in the Windows Wireless Network List. Once I did this, it showed up in the AirPort Utility, and I was able to access the internet. I have no idea what fixed the problem, but maybe it was simply a matter of waiting a few minutes before connecting to the network?
-
How to set up Proxy settings manually in Tools Options Advanced Network connection
i want to setup a Proxy on my desktop for secure browsing.. please tell me which IP address and which ports i can use to set the proxy setting manually.
See Tor: https://www.torproject.org/index.html.en
-
Windows 2012 Datacenter R2 - Network Connections Confusion
I have recently created a 2012 Datacenter install with the goal to create virtualize test lab.
As part of the install two connections were created:
1. Labeled 'Ethernet' with Hyper-V Extensible Virtual Switch protocol enabled.
2 Labeled 'Network 2' vEthernet (....Controller - Virtual Switch) with the standard networking protocols enabled.
3. Network 2 interface is connected to the local area network.
Ethernet adapter vEthernet (Realtek PCIe GBE Family Controller - Virtual Switch):
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
Physical Address. . . . . . . . . : BC-5F-F4-3B-11-EE
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.0.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 8.8.8.8
8.8.4.4
NetBIOS over Tcpip. . . . . . . . : Enabled
I am confused with the purpose of the network connection "Ethernet" and Hyper-Virtual Switch protocol and how this relates the "network 2" interface. I uncertain which network connection is the physical connections.
I have tried to research this with "windows 2012 datacenter network connection configuration, setup, and etc.", the results are a lot of the complex examination of setting of Hyper-V implementation, clusters, DHCP, and etc.
I hoping to locate information that will explain the fundamentals of these related technologies (tutorial, youtube videos, etc.). Any helpful advice is welcome.Hi,
Based on the information which you provide, you created an External virtual switch, which binds to the physical network adapter so that virtual machines can access a physical network.
->I am confused with the purpose of the network connection “Ethernet” and Hyper-Virtual Switch protocol and how this relates the “network 2” interface. I uncertain which network connection is the physical connections.
->Network 2 interface is connected to the local area network.
Based on your description, I suppose that you encountered some problems with understanding virtual network switch. When we install Hyper-V and create an external virtual network, the management operating system uses a new virtual network
adapter to connect to the physical network. The network connections consist of the original network adapter and the new virtual network adapter. The original physical network adapter does not have anything bound to it. However, the virtual network adapter
has all of the standard protocols and services bound to it. Here, the “vEthernet” is the new virtual network adapter, and the “Ethernet” was the original physical network adapter. Hyper-V binds the Virtual Network Service Protocol to the physical network adapter
when an external virtual network is created. So the “Ethernet” has the Hyper-V Extensible Virtual Switch only. The physical adapter was equal to a virtual switch at this moment, all networking traffic is routed though the virtual switch.
And to the physical machine, due to the physical adapter is a virtual switch now, so the new virtual network adapter is its network adapter now. So we can see the all TCP/IP configurations of vEthernet are the same with the local area
network.
For more details about virtual network switch, please refer to the link below,
http://technet.microsoft.com/en-us/library/dd581798(v=WS.10).aspx
Best Regards,
Tina -
Trying to configure a network connection on Fresh installation!
Hello,
I am new here. I am trying to configure a network connection. I prefer to configure a static Ip connection. So, i want to follow this guide-article:
https://wiki.archlinux.org/index.php/Systemd-networkd .
At the bottom of the page Static ip Network is located. So my main question is what is container and what is host?
Also, i would like a tip if possible, My computer is connected to a switch which gives IP to many computers. For this situation what is best? DHCP or static IP?
Thanks in advance!Ok, Here it comes ,
My internet connection is slow. I have a laptop next to me with windows on it and the difference is huge.
I am posting several outputs of commands.
# ping -c 3 google.com
PING google.com (194.177.211.120) 56(84) bytes of data.
64 bytes from 194.177.211.120: icmp_seq=1 ttl=60 time=15.2 ms
64 bytes from 194.177.211.120: icmp_seq=2 ttl=60 time=16.3 ms
64 bytes from 194.177.211.120: icmp_seq=3 ttl=60 time=21.4 ms
--- google.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 20185ms
rtt min/avg/max/mdev = 15.237/17.679/21.444/2.703 ms
# ping -c 5 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=51 time=72.9 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=51 time=66.6 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=51 time=61.7 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=51 time=70.1 ms
64 bytes from 8.8.8.8: icmp_seq=5 ttl=51 time=65.4 ms
--- 8.8.8.8 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4005ms
rtt min/avg/max/mdev = 61.792/67.407/72.936/3.846 ms
# cat /etc/systemd/network/50-static.network
[Match]
Name=eth0
[Network]
DNS=192.168.7.2 8.8.8.8
Gateway=192.168.7.2
Address=192.168.7.120/24
# time wget [url]http://www.google.com[/url]
--2015-03-05 01:26:33-- [url]http://www.google.com/[/url]
Resolving [url=http://www.google.com]www.google.com[/url] ([url=http://www.google.com]www.google.com[/url])... 194.177.211.113, 194.177.211.117, 194.177.211.121, ...
Connecting to [url=http://www.google.com]www.google.com[/url] ([url=http://www.google.com]www.google.com[/url])|194.177.211.113|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: [url]http://www.google.gr/?gfe_rd=cr&ei=EJX3VLfcB4aJ8Qf-yYDACA[/url] [following]
--2015-03-05 01:26:38-- [url]http://www.google.gr/?gfe_rd=cr&ei=EJX3VLfcB4aJ8Qf-yYDACA[/url]
Resolving [url=http://www.google.gr]www.google.gr[/url] ([url=http://www.google.gr]www.google.gr[/url])... 194.177.211.121, 194.177.211.122, 194.177.211.116, ...
Reusing existing connection to [url=http://www.google.com:80]www.google.com:80[/url].
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘index.html’
index.html [ <=> ] 17.89K --.-KB/s in 0.04s
2015-03-05 01:26:43 (427 KB/s) - ‘index.html’ saved [18317]
real 0m10.441s
user 0m0.010s
sys 0m0.010s
# wget [url]http://www.google.com[/url]
Resolving [url=http://www.google.com]www.google.com[/url] ([url=http://www.google.com]www.google.com[/url])... 194.177.211.117, 194.177.211.116, 194.177.211.119, ...
Connecting to [url=http://www.google.com]www.google.com[/url] ([url=http://www.google.com]www.google.com[/url])|194.177.211.117|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: [url]http://www.google.gr/?gfe_rd=cr&ei=KZf3VM7SB6mH8Qeu_ICIBA[/url] [following]
--2015-03-05 01:35:35-- [url]http://www.google.gr/?gfe_rd=cr&ei=KZf3VM7SB6mH8Qeu_ICIBA[/url]
Resolving [url=http://www.google.gr]www.google.gr[/url] ([url=http://www.google.gr]www.google.gr[/url])... 194.177.211.123, 194.177.211.122, 194.177.211.119, ...
Reusing existing connection to [url=http://www.google.com:80]www.google.com:80[/url].
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: ‘index.html.1’
index.html.1 [ <=> ] 17.92K --.-KB/s in 0.03s
2015-03-05 01:35:50 (573 KB/s) - ‘index.html.1’ saved [18346]
# lspci -v
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
Subsystem: Gigabyte Technology Co., Ltd Motherboard
Flags: bus master, fast devsel, latency 0, IRQ 26
I/O ports at de00 [size=256]
Memory at fdbff000 (64-bit, prefetchable) [size=4K]
Memory at fdbe0000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at fde00000 [disabled] [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Count=2 Masked-
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number 12-34-56-78-12-34-56-78
Kernel driver in use: r8169
Kernel modules: r8169
# cat /etc/resolv.conf
# This file is managed by systemd-resolved(8). Do not edit.
# Third party programs must not access this file directly, but
# only through the symlink at /etc/resolv.conf. To manage
# resolv.conf(5) in a different way, replace the symlink by a
# static file or a different symlink.
nameserver 192.168.7.2
nameserver 8.8.8.8
# cat /etc/hosts
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain zabArch
::1 localhost.localdomain zabArch
# End of file
# dmesg | grep r8169
[ 4.695019] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.695029] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 4.695227] r8169 0000:02:00.0: irq 26 for MSI/MSI-X
[ 4.695411] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc9000063e000, 00:24:1d:d1:44:ea, XID 1c4000c0 IRQ 26
[ 4.695414] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 6.859386] r8169 0000:02:00.0 eth0: link down
[ 6.859425] r8169 0000:02:00.0 eth0: link down
[ 8.479455] r8169 0000:02:00.0 eth0: link up
# time dig google.com
bash: dig: command not found
real 0m0.002s
user 0m0.000s
sys 0m0.000s
# time echo -e 'GET /HTTP/1.0\nHost: google.com\n\n'|nc 74.125.79.99:80
Error: Couldn't resolve host "74.125.79.99:80"
real 0m0.003s
user 0m0.000s
sys 0m0.000s
My motherboard is GIGABYTE GA-MA785GMT-UD2H
My network card is Realtek 8111C Gigabit Ethernet (10/100/1000Mbit)
I am trying firefox and uzbl-browser.
If any information is missing, please do not hesitate to ask.
Thanks in advance!
Last edited by zabrielza (2015-03-05 07:51:03) -
Mountain Upgrade + Missing Network Connections
I just did the recent Mountain upgrade to 10.8.5 and all my printer network connections and my home network connection (which I paid to have set-up) are now missing. Please tell me there is an easy fix to this problem.
Thanks in advance.I can't tell you there is an easy fix because I don't know what's wrong. Requires troubleshooting.
Please start by doing a Safe Boot (it does some repair stuff in the process).
To do a Safe Boot, restart or turn on the computer. After hearing the gong sound, press and hold the Shift key until you see the progress indicator. Then you can release the shift key. Safe Boot will take longer - up to ten or 15 minutes. You can confirm you are in Safe mode by seeing the words Safe Boot at top of login dialog and top of Finder.
Test your internet while in Safe mode. Let us know that result.
Now, restart in normal mode by Not pressing shift.
Again check internet and tell us the result.
If still not working, go to System Preferences, Network prefs, and tell us every thing you see in that dialog box. (left side, what's listed and what color indicator dots by each, etc.) -
Many users complained some wifi cards missing the
/configure/Advanced „Network Address” funktion.Without this function
does not work normal MAC adresses which begin for example
„00”.There are many
forums people write about (indignantly)
the problem.
picture here
of what
I mean:
stewx.cba.pl/extend-your-free-wifi-by-spoofing-your-mac-address/
older post more links:
social.technet.microsoft.com/Forums/windows/en-US/8f33667e-ba25-442c-a49b-a3aec79b6cc9/windows-781-can-not-change-the-mac-address-on-wifi-and-cannot-load-login-page-in-public-hotspot?forum=w8itpronetworking
I'm curious about the Windows 10 users
experience with different
wifi cards.
This function working perfectly, all linux platform,Mac,already in android,the old windows XP,windows 2000,
it's a basicthing.This problem affects some reason only are newer Windows platforms and directly the wifi option.well....it doesn't matter whether the MAC add is 00-14-BF-93-D2-66 or 00:14:BF:932:65 or any other format .. the most important thing is the hex decimal numbers are the same ... so not worry about it...
-
How to disable Setting button in Tools - Options - Advanced - Network..i've read an article that solved this problem..but thats problem contains web adress that couldn't be opened..any other solution???
thanks before
best regard
-ariansyah-You can disable or remove that button, but that won't prevent users from making the changes on the about:config page directly.<br />
You can lock the related network.proxy prefs if you do not want users to change the connection settings.
See:
*http://kb.mozillazine.org/Locking_preferences
* http://kb.mozillazine.org/network.proxy.type
* http://kb.mozillazine.org/network.proxy.%28protocol%29
* http://kb.mozillazine.org/network.proxy.%28protocol%29_port -
When trying to activate facetime get the message i get "could not sign in. Please check network connections
My Apple ID is correct
tried with a new apple Id ...doesn't work neither
My connection is correct..;
I ve seen that this issue is frequent within mac users
Can anyone bring some help?
Thank youHello
Try this... I had the same problem and this worked for me.
Go to your system preferences → network → make sure WI-FI selected → advanced → DNS tab. Add 8.8.8.8 to the DNS servers. Go back to FaceTime and try to verify your account again.
Good luck! -
Bootcamp Windows 7 Wireless Network Connection: No Valid IP Configuration
I just bought a new 13" MBP and have installed Windows 7 Ultimate via Bootcamp 5.0. I installed the Windows Support Software that I had previously downloaded via Bootcamp Assistant on Mac OS. Although the Wireless Network Connection asked for my network key and connects to the network, I cannot access the internet. The troubleshooter find this problem: "Wireless Network Connection" doesn't have valid IP configuration. I am using my old Dell computer and it is connecting to the wireless properly and my MBP can connect on Mac OS, so I don't think it's a router issue. Here are the things I have tried so far to resolve this issue, but none have worked:
Uninstalling the Broadcom Network Adapter driver, restarting the computer, and reinstalling
Repairing the Windows Support Software with the Bootcamp 5.0.5033 Support Software Update downloaded from www.apple.com
Uninstalling the Broadcom Network Adapter driver, restarting the computer, and reinstalling the driver from Bootcamp 5.0.5033
ipconfig /release gives an error about disconnected media.
ipconfig /all says:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Alise-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet
Physical Address. . . . . . . . . : 68-5B-35-7C-FC-A9
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter
Physical Address. . . . . . . . . : A8-BB-CF-1B-54-3A
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::1d6a:752c:62e3:d01b%15(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.208.27(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 313048015
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-C6-A6-83-A8-BB-CF-1B-54-3A
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Bluetooth Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
Physical Address. . . . . . . . . : A8-BB-CF-1B-54-3B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{C38C3280-5682-4E5A-A978-9DD1A96CDBFF}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{ABCE958D-5FDB-4D1E-86F5-ECF01B80E01F}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{749630EF-9B2E-4DF1-9B6F-B38A5237F81A}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Please help!Did you find a solution for this? I have exaclty the same problem.
But I could temporarily solve it by setting an IP, gateway, dns etc manually. But that will only work in my current wifi-network.
I can't even get internet sharing from my iphone -
XML Schema validation error in network configuration. Missing DnsRef
When ever we try to make changes to a Virtual network we receive
XML Schema validation
error in network configuration. Missing DnsRef
We can't make any changes to the Virtual network.
The DNS ref exists as well.
Considering exporting network config and re-importing however we have a lot of networks configured and want to be sure this is the correct way to proceed.
Any feedback much appreciated.
ThanksHi,
We are having the same problem, so you are not alone.
I had an extensive call with Azure premium support and we where able to determine that:
- Nothing is missing or in the wrong place in my exported .xml file.
- Any changes to the VNET's using the web gui interface of https://manage.windowsazure.com is not possible when you have dns servers and use an gateway
- You can download the .xml configuration file of the network and make manual changes to it, then import it again , to add/remove dns servers and or subnet's.
I am currently waiting for an solution, i have let them lower the urgency from A to B (because i can make changes trough xml) and responded to the next support contact (saying he will continue with the issue) that the problems seems to be with azure and
he should speak with the previous person helping me. I have not heard from Azure support since.
SR Number:115021812414226
Open on:02/18/2015 09:28
> There are networks with and without gateways created and the issue is happening on all the networks.
> We are unable to add or remove the DNS servers. (by web gui)
> Also not able to add or remove any subnets. (by web gui)
> Every time the error message is same but the DNS server name is different. (from another subnet then the one we are changing)
> Created CRI- 3405931, but they said it will need WATS team.
> Confirmed with WATS engineer as well and moving case to WATS.
> Cx agreed to lower the severity of the case as they are able to make changes through the network configuration file.
> But they still want to get this resolved soon.
> Agreed and dropped off, reducing severity to B 24/7.
I hope microsoft is going to resolve this soon, as i do not want to edit my xml for little things like adding a subnet all the time. I have requested an status update in the issue.
Should anyone have more information on this, please share it here. -
How to disable Setting button in Tools - Options - Advanced - Network from windows registry?
Dear support,
Now, my office use Firefox as default browser to access WebServer. And there are some policy that users must use ProxyServer. I do not want user change proxy setting in Firefox. How to disable Setting button in Tools - Options - Advanced - Network from windows registry?
Thank you.
TrekyYou can not use the Windows registry to disable items in Firefox. This link shows how to lock down Firefox proxy settings, change the values to suit your needs:
http://www.stbernard.com/ip5kb/iPrism/WhatsNew/50SupportFiles/SupportFiles/IP0460.htm
One minor variation, in step 4 instead of adding that line to all-js, you can create a file called ''local-settings.js'' containing the line shown and save the file in the same folder as all.js -
Workflow mailer configuration -Unable to make a network connection
Hi Friends,
We are trying to configure imap server in 11i workflow notification mailer & getting the error message "Unable to make a network connection".
system configuration:
EBS 11i - windows 2003 server
database - 11.1.0.7
for imap server we are using ms exchange server 2007.
pl help us to resolve this issue .
*Jan 24, 2012 2:13:58 PM GST]:1327400038328:Thread[BES Dispatch Thread,5,main]:0:-1:QLNG-S-012:172.16.4.12:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-51286 : oracle.apps.fnd.cp.gsc.SvcComponentStateMachine.updateComponentStatus(Logger, Connection, int, String, String)]:BEGIN (Logger{mLog=[$Header: AppsLog.java 115.78 2004/12/16 16:17:13 rnix ship $ @23667197 {oracle.apps.fnd.profiles.ExtendedProfileStore@136a43c}],mUniqueId=SVC-GSM-WFMLRSVC-51286,mLevel=4}, oracle.jdbc.driver.OracleConnection@1a7508a, 10006, STOPPED_ERROR, Could not handle the control event -> oracle.apps.fnd.cp.gsc.SvcComponentContainerException: Could not start component; performing rollback -> oracle.apps.fnd.cp.gsc.SvcComponentException: Validation failed for the following parameters -> {INBOUND_SERVER=Unable to make a network connection.}. Parameters were -> {INBOUND_MAX_IGNORE_SIZE=1000, INBOUND_MAX_LOOKUP_CACHE_SIZE=100, ATTACH_IMAGES=Y, ALLOW_FORWARDED_RESPONSE=Y, INBOUND_UNSOLICITED_THRESHOLD=2, NODENAME=WFMAIL, SEND_UNSOLICITED_WARNING=Y, AUTOCLOSE_FYI=Y, PROCESSOR_READ_TIMEOUT_CLOSE=N, INBOUND_PROTOCOL=IMAP, ATTACHED_URLS=WFMAIL:ATTACHED_URLS, [email protected], PROCESSOR_OUT_THREAD_COUNT=1, EXPUNGE_ON_CLOSE=Y, ATTACH_STYLESHEET=Y, OUTBOUND_CONNECTION_TIMEOUT=120, INBOUND_MAX_RET_EMAIL_SIZE=100, MAX_INVALID_ADDR_LIST_SIZE=100, PROCESSOR_MAX_LOOP_SLEEP=60, SEND_ACCESS_KEY=N, PROCESSOR_IN_THREAD_COUNT=1, FRAMEWORK_APP=1, CLOSED=WFMAIL:CLOSED, INBOUND_FETCH_SIZE=100, SUMMARY=WFMAIL:SUMMARY, ENABLE_STYLESHEET=N, PROCESSOR_ERROR_LOOP_SLEEP=60, OPEN_MAIL_FYI=WFMAIL:OPEN_MAIL_FYI, FRAMEWORK_RESP=20420, ALTERNATE_EMAIL_PARSER=oracle.apps.fnd.wf.mailer.DirectEmailParser, INBOUND_PASSWORD=_8#6#$##88^9494^!$$89$#^666@#496^#4!$8$ `A+A9+*|!$^}^&%|#}!@%^$09|@}$#}0+, RESET_NLS=N, HTTP_USER_AGENT=Mozilla/4.76, PROCESS=PROCESS, OPEN_MAIL_DIRECT=WFMAIL:OPEN_MAIL_DIRECT, PROCESSOR_LOOP_SLEEP=5, MESSAGE_FORMATTER=oracle.apps.fnd.wf.mailer.NotificationFormatter, [email protected], FRAMEWORK_USER=0, CANCELED=WFMAIL:CANCELED, OUTBOUND_PROTOCOL=SMTP, DISCARD=DISCARD, [email protected], FROM=Workflow Mailer, PROCESSOR_DEFER_EVTDATA_READ=Y, SEND_CANCELED_EMAIL=Y, WARNING=WFMAIL:WARNING, PROCESSOR_MAX_ERROR_COUNT=10, INBOUND_CONNECTION_TIMEOUT=120, HTMLAGENT=http://qlng-s-012.qalhatlng.int:8000/pls/PROD, INBOX=INBOX, OPEN_INVALID_MORE_INFO=WFMAIL:OPEN_INVALID_MORE_INFO, OUTBOUND_SSL_ENABLED=N, INBOUND_SERVER=172.16.4.3, OPEN_MORE_INFO=WFMAIL:OPEN_MORE_INFO, MAILER_SSL_TRUSTSTORE=NONE, INLINE_ATTACHMENT=N, OPEN_INVALID=WFMAIL:OPEN_INVALID, EMAIL_PARSER=oracle.apps.fnd.wf.mailer.TemplatedEmailParser, DIRECT_RESPONSE=N, OPEN_MAIL=WFMAIL:OPEN_MAIL_OUTLOOK, HTML_DELIMITER=DEFAULT, FRAMEWORK_URL_TIMEOUT=30, COMPONENT_LOG_LEVEL=1, SUMHTML=WFMAIL:SUMHTML, PROCESSOR_READ_TIMEOUT=10, DEBUG_MAIL_SESSION=N, INBOUND_SSL_ENABLED=N, OUTBOUND_SERVER=qlng-s-003.qalhatlng.int})
[Jan 24, 2012 2:14:38 PM GST]:1327400078003:Thread[ComponentMonitor,5,main]:0:-1:QLNG-S-012:172.16.4.12:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-51286 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10006
[Jan 24, 2012 2:14:46 PM GST]:1327400086473:Thread[BES Dispatch Thread,5,main]:0:-1:QLNG-S-012:172.16.4.12:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-51286 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:(BusinessEvent{name=oracle.apps.fnd.cp.gsc.SvcComponent.start, key=SVC:24-JAN-2012, priority=50, correlationId=null, sendDate=Tue Jan 24 14:14:40 GST 2012, receiveDate=null, From Agent: , To Agent: , Last Subscription= , Error Message=null, Error Stack=null, [email protected], COMPONENT_ID=10006, CONTAINER_PROCESS_ID=51286, CONTAINER_TYPE=GSM, BES_PAYLOAD_OBJECT=false})
[Jan 24, 2012 2:14:56 PM GST]:1327400096565:Thread[BES Dispatch Thread,5,main]:0:-1:QLNG-S-012:172.16.4.12:-1:-1:EXCEPTION:[SVC-GSM-WFMLRSVC-51286 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent(int, String, String)]:Successfully retrieved component details from the database*Thanks for your update.
I have checked as per the metalink doc "242941.1" . i am getting below message only for IMAP.
*C:\prod\scripts>%AFJVAPRG% -classpath %AF_CLASSPATH% -Dprotocol=imap -Ddbcfile=
c:\prod\prodappl\fnd\11.5.0\secure\PROD_qlng-s-012\prod.dbc -Dserver=qlng-s-003.
qalhatlng.int -Dport=995 -Dconnect_timeout=120 -Ddebug=Y -Daccount=oracle1@qlng
.om -Dpassword=System123 -DdebugMailSession=Y oracle.apps.fnd.wf.mailer.Mailer
MLRTST : oracle.apps.fnd.cp.gsc.Logger.Logger(String, int) : Logging to System.o
ut until necessary parameters are retrieved for Logger to be properly started.
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.
IMAPStore,Sun Microsystems, Inc]*
Kindly suggest need to any setup in ms exchange server or firewall level.
Thanks -
I just went from OS 10.6 to 10.8. The arrow button is gone from the scrollbar. I do not see the option in "Systems Preference" any more. Am I missing something. If it is gone, is Apple going to bring it back?
John R M wrote:
Thank you. I believe Apple shoud give you the option as to whether or not you may want to use the arrows.
Apple give users what they want?
Good luck there, the head of iOS Scott Forstall was canned, I suspect this was his favorite picture.
However I bring salvation and sanity, the option to go back to the wonderous Snow Kitty.
How to revert your Mac to Snow Leopard
How to erase and install Snow Leopard 10.6
Be sure to vent to Apple for the stupid changes here
https://www.apple.com/feedback/macosx.html -
InDesign Crashing on file open - Missing Font / Network Connection Lost
For starters I am using InDesign 5.5 When I open the file, either by clicking on the file through finder or or opening it through indesign I get the following error message:
The document "file name.indd" uses one or more fonts which are not currently available on your system.
I can't press either Find Font or OK - wheel spins then after 30 seconds or so and then I get the message:
The network connection was lost for the file "file name.indd", or the file was modified by another process.
Press OK. Nothing happens. Activity monitor says Indesign is using 100% of the cpu and not responding. The file is on my local machine and nothing has changed on it since the last time I opened it without issues 3 days ago. I'm not running anything that could be using the file or any of the images the file uses. I have downloaded and installed the font that was missing and the error message hasn't changed. Any ideas?Try the option: save a copy for duplicate a file
Hope,it works
Maybe you are looking for
-
I would like to copy my iPhoto (9.4.1) library from my Mac Pro (10.7.5) to a Macbook Pro (10.7.5). Can I drag the iPhoto Library from the Pictures folder to Air Drop and send them to the MacBook? If I then move that to the Pictures folder on the MacB
-
Error when create a new SQLJ File
Hi Any idea why I am getting the following error when I try to create SQLJ file? Caught SQL Error: could not instantiate class: com.sap.dictionary.database.catalog.XmlCatalogReader
-
RoboHelp reordered my linked FM files
I have a RoboHelp project that is linked to a FrameMaker book. I have been having problems with the linking - I make changes to the FM files and update the RoboHelp project but the changes don't always take effect - so I shut down both programs. I op
-
Regarding customer account not updated properly
Hi gurus My customer account is not updated plz solve my issue. one material is sold to customer for rs 9/- insted of rs 10/- the difference amount is posted in sd side, all taxes are updated in background processing. How we will update in customer.
-
I get an error message in creatice cloud whehn I try to download Apps. It says to contact customer support. I have been on chats and read forums and tried: Unistalling and reinstalling Creative Cloud Renaming the OOBEE folder in the library Running A