Preferences won't work!
Hi, I installed a Boot Camp partition from when I was on Leopard, but I recently downgraded back to Tiger.
In System Preferences in the Spotlight prefpane and on the "Privacy" tab, I try dragging in my Windows drive but it just won't go in there and it did in Leopard!
Should I delete all my preference plists or what?
HI,
Try troubleshooting the Safari .plist file.
Quit Safari (Command + Q) Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Launch Safari. Go to Safari / Preferences or Command , (comma) on your keyboard. If the Safari pref pane renders correctly, move that .plist file to the Trash.
Carolyn
Similar Messages
-
Mac Sleep Timer (through 'Energy Saver' in System Preferences) won't work
Hello,
I have a MacBook (13-inch, Mid 2009) running Mac OS X Snow Leopard 10.6.3,
and it has been installed with the latest software updates possible.
(The latest update is the 'Security Update 2010-003')
Previously I was using Mac OS X Leopard 10.5 on my MacBook,
and I can vaguely remember the timed computer sleep through Energy Saver would work.
That is, when the counter's time matches the amount of time I specified (e.g. 10 minutes), the computer enters sleep mode and displays a pulsing power light.
After upgrading to Snow Leopard I can barely remember the scheduled computer sleep will work as I don't really notice how it sleeps / I will shut down my MacBook before I go to bed.
==========
However, last night I was really tired and slept in front of my MacBook unconsciously.
When I woke up, I found that my MacBook didn't display a pulsing power light but a continuously-growing power light.
I tapped the trackpad and the display turned on, so I knew that my MacBook didn't go to sleep a whole night.
*What that means is that the Sleep Timer (through 'Energy Saver' in System Preferences) won't work.*
But the timed display sleep DOES work.
==========
After spending a whole day Googling,
I found that there are plenty of people suffering the same problem as me, although their Macs and OSs vary.
I also found an official support page from Apple concerning the related issue:
Mac OS X: Why your Mac might not sleep or stay in sleep mode
http://support.apple.com/kb/HT1776
I tried the following methods but still can't resolve the problem:
_- boot my MacBook in safe mode_
_- use the 'Disk Utility' to repair Disk Permissions through booting my MacBook from the Mac OS X Snow Leopard Installation DVD_
_- reset NVRAM (Intel-based) (as PRAM is used by PowerPC-based Macs)_
_- reset SMC (System Management Controller)_
NONE of the above-mentioned methods can resolve the problem.
Althought I am sure that the Spotlight isn't indexing the hard drive, and I just start my computer and do nothing and wait for the scheduled computer sleep, the scheduled computer sleep just won't work.
In the other Mac forum, I saw someone suggest installing an application called PleaseSleep:
http://www.dragonone.com/products/macosx/pleasesleep/
It works.
But I really want to find out what caused this problem as this is a function shipped with Mac which is expected to work normally.
What's more, Apple is claiming to be a green Apple, right?
==========
Here's the log taken from 'Console':
- Sleep by closing the lid of my MacBook:
Apr 18 13:21:05 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:21:05 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:21:07 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:23:21 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:23:21.028 PM - Waketime:4/18/2010 1:23:19.410 PM = Deltatime:1.618421972
Apr 18 13:23:21 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:23:21.579 PM - Waketime:4/18/2010 1:23:19.410 PM = Deltatime:2.169138968
Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Clamshell Sleep
Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - EC LID0
Apr 18 13:23:23 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:23:23 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- Sleep by manually clicking the Apple logo in the upper left corner of the screen -> 'Sleep':
Apr 18 13:31:46 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:31:46 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:31:49 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:32:04 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:32:04.033 PM - Waketime:4/18/2010 1:32:02.720 PM = Deltatime:1.313067079
Apr 18 13:32:04 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:32:04.589 PM - Waketime:4/18/2010 1:32:02.720 PM = Deltatime:1.869303048
Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
Apr 18 13:32:06 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:32:06 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- Sleep by manually pressing control + eject, and the press 'Sleep':
Apr 18 13:34:17 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:34:17 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:34:46 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:34:46.080 PM - Waketime:4/18/2010 1:34:44.720 PM = Deltatime:1.360466003
Apr 18 13:34:46 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:34:46.564 PM - Waketime:4/18/2010 1:34:44.720 PM = Deltatime:1.844347000
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 566 ms
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: bootpsessiontransmit: bpf_write(en0) failed: Network is down (50)
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: DHCP en0: INIT transmit failed
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 567 ms
Apr 18 13:34:46 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
Apr 18 13:34:48 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:34:48 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- Sleep by _turning on the application called 'PleaseSleep' based on the settings from 'Energy Saver'_:
Apr 18 13:37:22 Michael-Leungs-MacBook PleaseSleep[288]: Application is enabled
Apr 18 13:37:29 Michael-Leungs-MacBook System Preferences[1136]: * AGCAttach() failed
Apr 18 13:37:31 Michael-Leungs-MacBook [0x0-0x58058].com.apple.systempreferences[1136]: Couldn't find any matches.
Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Checking sleep conditions...
Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Going to sleep...
Apr 18 13:38:23 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback WILL sleep
Apr 18 13:38:23 Michael-Leungs-MacBook PleaseSleep[288]: Sleep notification received from the system
Apr 18 13:38:56 Michael-Leungs-MacBook loginwindow[25]: loginwindow SleepWakeCallback will power on, Currenttime:4/18/2010 1:38:56.042 PM - Waketime:4/18/2010 1:38:54.720 PM = Deltatime:1.321902931
Apr 18 13:38:56 Michael-Leungs-MacBook loginwindow[25]: handleUnlockResult, Currenttime:4/18/2010 1:38:56.571 PM - Waketime:4/18/2010 1:38:54.720 PM = Deltatime:1.850627959
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: PMConnection AirPort configd plug-in com.apple.powermanagement.applicationresponse.slowresponse 707 ms
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: bootpsessiontransmit: bpf_write(en0) failed: Network is down (50)
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: DHCP en0: INIT transmit failed
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: PMConnection IPConfiguration com.apple.powermanagement.applicationresponse.slowresponse 708 ms
Apr 18 13:38:56 Michael-Leungs-MacBook configd[37]: network configuration changed.
Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Sleep: Success - AC 98 - Software Sleep
Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Wake: Success - AC 98 - OHC1
Apr 18 13:38:58 Michael-Leungs-MacBook configd[37]: Hibernate Statistics
Apr 18 13:38:58 Michael-Leungs-MacBook PleaseSleep[288]: Wake notification received from the system
- If I disable 'PleaseSleep' and only depend on the non-working 'Energy Saver', nothing happens.
==========
Looking forward to your replies! Thanks in advance!Found this discussion by googling "com.apple.systempreferencescouldn't find any matches"...
One month ago I bought a brand new Macbook Pro 13", and after a couple of weeks I realized it wasn't sleeping on its own when it should, per the system preferences. (I did sleep when I chose "Sleep" in the menus or closed it... It just wouldn't sleep on its own, while open.) What was extra frustrating was that it was intermittent... It would sleep on its own maybe 1/3 of the time, but other times it would NEVER go to sleep. I deleted PowerManagement.plist, reset the SMC, etc... No luck.
I took it to the "geniuses" at the Apple Store, and the guy took all of five minutes trying to diagnose the problem. When my MBP wouldn't sleep on its own, he promptly replaced it with a new one. That was nice, but I actually would have preferred that he diagnosed and fixed it. (I think the store was so swamped with people coming in for service that day that they were doing anything they could to close cases and get customers out of there ASAP.)
Now, sitting here with my 48-hour-old MBP, I still have the problem. The other one was so new that I had barely put anything on it yet. The only applications I had put on it were MS Office for Mac 2011, Firefox, Chrome, and Adobe Flash Player. I've put Office and Flash Player on this one, but not yet Firefox or Chrome. That's it. No other customization or fancy business.
I looked into the Console just now, and I see the "Couldn'tfind any matches" entry popping up again and again. The last three seemed to pop upright around the time when my MBP should have gone to sleep on its own, but not down to the second, so it's hard to definitively point at that and say it's it for sure.
They need to fix this!! -
Finder window preferences won't work
hi,
i don't seem to get working where the new finder window opens. in Finder Preferences, under General i have selected Documents for the new finder window to open but it still opens in Machintosh HD. i've tried Home and Computer but it doesn't work either, it seems to be stuck to open in Machintosh HD. i've restarted the computer but it still doesn't work. can anyone help? thanks.A_,
Glad to help again.
Use the checklist in The Repair functions of Disk Utility: what's it all about? by Dr. Smoke.
Download and reinstall both the Mac OS X 10.4.6 for PPC, and the Security Update 2006-003 Mac OS X 10.4.6 Client (PPC).
If that is unsuccessful follow the troubleshooting checklist in Resolving Disk, Permission, and Cache Corruption, by Dr. Smoke.
;~) -
The only thing I can think that I've done differently is that I'd downloaded a scanner driver from Canon. Everything worked fine for days after that. It wasn't until I shut down the computer and restarted it that I keep getting these prompts to enter keychain passwords and it rejects the only passwords I've ever used. No idea what to do. Any help would be greatly appreciated! :-)
I just found the fix in another post! Here it is, in case anyone has the same issue...
http://support.apple.com/kb/TS5362 -
only opens to auto fill
HI,
Try troubleshooting the Safari .plist file.
Quit Safari (Command + Q) Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Launch Safari. Go to Safari / Preferences or Command , (comma) on your keyboard. If the Safari pref pane renders correctly, move that .plist file to the Trash.
Carolyn -
Email preference won't work in aperture3
Try as i might i am unable to set email size in prefs to anything but full size jpeg
Solution found. Where you select the size of the image for export (email), there is an option to edit the size. Select the Edit button and then specify the size you want in the right hand side of the panel such as 25% of the original size or select the suggested sizes from the left hand side of the panel.
That works even if when you return to the export panel it still looks unchanged. If I selected 50% from the left hand panel, it did change to 50% in the export panel, but if I typed in 25% in the right hand panel, it still said it was going to export 100% but actually did send an image of 25%. -
I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks
Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden -
my spreadsheet created with numbers program version 3.0 created on my mac won't work on my ipad version 2.0. It says I have to save the file with preview option but there is no such option in preferences. Any thoughts?
For the update to run Aperture must be installed in the system Application folder and named simply Aperture, not Aperture3.2.2 or anything else.
I don't know if this would also affect photo stream but if your Aperture is misnamed or installed in an incorrect location fixing that to see if it clears up the problem would be a good first step. -
Need scanner App for Dock. I have Maverick 10.9.5 and Epson Perfection V500 photo. My present app 3.7.1 won't work. Otherwise I have to go into System Preferences every time I scan to Select to switch from the Printer. Thanks for help.
You might give VueScan a try. It should work with your scanner. There's a demo version that you can use initially.
-
The favorites list disapeared from finder's sidebar. The checkboxes on preferences to put them back won't work. What should I do to have them back?
Nope... the word "Favorites" doesn't even appear on the sidebar. As I mentioned, I went to <preferences><sidebar> and all the favorites are unchecked. I tryed to check them but it looks like the checkboxes are disabled.
-
Many of my System preferences won't load in mavericks?
Since updating to 10.9 many of my system preferences won´t load. These are:
- Security: You can’t open Security & Privacy preferences because it doesn’t work on an Intel-based Mac.
- Notifications: Could not load Notifications preference pane.
- Printers & Scanners: Could not load Printers & Scanners preference pane.
- iCloud: Could not load iCloud preference pane.
- Internet accounts: Could not load Internet Accounts preference pane.
- Networks: Could not load Network preference pane.
- Sharing: You can’t open Sharing preferences because it doesn’t work on an Intel-based Mac.
- Users & Groups: You can’t open Users & Groups preferences because it doesn’t work on an Intel-based Mac.
- Parental Controls: Could not load Parental Controls preference pane.
- Date & Time: You can’t open Date & Time preferences because it doesn’t work on an Intel-based Mac.
Any hints on a solution are greatly appreciated!
Best regards, MikkelTo further explain:
I didn't need to locate any invisible files in my case. I discovered that I had 4 versions of the System Preferences application on my computer. (The System Preference applicatioin is what loads the preference pains when you seledt System Preferences.) I merely searched for "System Preferences" in spotlight. Spotlight located 4 different versions of the System Preferences application. Some of those versions apparently tied to preference panes that used the old 32 bit encoding from the non Intel processor days. When I clicked on the System Preferences under the Apple menue it was apparently pulling up an old version of the System Preferences applicatioin instead of the correct one in the main Applications folder. I also noted that if I clicked on System Preferernces in the dock or directly in the the Applications folder, I would not have the problem of some of the preference panes not able to be viewed because of the " "it doesn’t work on an Intel-based Mac" message. So I surmised that the correct System Preferences application was in the Applications Folder on the top level of the drive directory like it was supposed to be but that when I clicked on System Preferences from the Apple menue it was loading one of the 3 old System Preferences applications that were buried elsewhere on my hard drive. If you find you have more than one System Preferences application on your hard drive you need to trash the other System Preferences Applications. Before trashing the duplicates, you should test the one in the main Applications folder by directly double clicking it and make sure all the preference panes in it work properly then trash the duplicate System Preferences applications you found in spotlight.
You may also find like I did, that you not only have duplicates of the System Preferences on your hard drive but also several old duplicates of the entire Applications folder buried on your hard drive. if that is the case you should compare each folder and make sure there is nothing in the old duplicate Applications folders you still need. You will probably find that all of the latest versions of your applications are in the main Applications folder where they should be. If so then trash all the old duplicate Applications folders as well. Keep only the main Applications folder on the top level of the hard drive.
Trashing all these extra old Applications folders that held old duplicates of all my applications in them on my hard drive solved a bunch of other problems I was having with some of the applications as well.
For the technically minded: Why does this happen with Mavericks and not with Mountain Lion? I suspect that the old Applications folders and old duplicate System Sreferences applications didn't matter to Mountain Lion because it searched for the System Preference application under the Apple menu differently than Mavericks does. I believe Mountain Lion seached all the top levels of the Application folder before drilling down into any subfolders to find the System Preferences application. Mavericks apparently does it the opposite way. It searches the first subfolder in you Applications folder and drills all the way down in that subfolder first before going to the next subfolder and drilling down in that subfolder all the way to the bottom. So it searches all the subfolders before searching the main level of the Applications folder for System Preferences. Since my old duplicate System Preferences applications where in subfolders with titles that were earlier in the alphabet than the main System Preferences application it searched those subfolders first, found the old System Preferences application in the those earlier folders and loaded the old System Preferences first in the subfolders instead of the correct one further on in the main Applications folder. If any one else has a better idea let me know.
--Scott
micmac2105 wrote:
Hello,
have the same problem, however, I do not understand the hint for solving the problem.
How to show invisible files?
How to find applications/system preferences and call Get info from file menu?
Where are all these things, have never seen them before or heard of them.
Thanks for help
Michael
micmac2105 wrote:
Hello,
have the same problem, however, I do not understand the hint for solving the problem.
How to show invisible files?
How to find applications/system preferences and call Get info from file menu?
Where are all these things, have never seen them before or heard of them.
Thanks for help
Michael
micmac2105 wrote:
Hello,
have the same problem, however, I do not understand the hint for solving the problem.
How to show invisible files?
How to find applications/system preferences and call Get info from file menu?
Where are all these things, have never seen them before or heard of them.
Thanks for help
Michael -
My game center won't load and shows up blank when I try to open it. I've already closed all of my apps and restarted it and it still won't work. Is their anyway to fix it without restoring it and starting over??
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- sign out and the sign back into Game Center
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device. -
Mouse clicks won't work on the browser - any suggestions?
Following an upgrade of Firefox last year, I can't get the mouse clicks to work on the browser. Doesn't matter whether it's left or right buttons. The radio buttons and links get highlighted when you hover the mouse over the links or the buttons but they won't work when clicked. They work on other browsers (Explorer and Chrome) but no longer on Firefox. I'm using it on a Sony Vaio laptop running Windows 7
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
Magic Trackpad won't work with Magic Mouse on brand new 2011 27" i5 iMac
I have a brand new 2011 27" i5 iMac which I bought with Snow Leopard pre-loaded. Naturally, I included the new Magic Trackpad in my purchase, and though there were some problems with the device in SL - such as it going haywire without explanation - it generally worked, although battery levels were erratic (one day 80%, then an hour later 42%, then 80% again).
When I installed Lion I did a clean install after backing up to Time Machine - and a Super Dupered external drive. I had some difficulties trying to install Lion from an external flash drive so I deleted again and reinstalled SL, then reinstalled over the SL install I did (with no other software except Mac OS X 10.6.8 and other system updates to facilitate install). Rather than copying apps from my old SL drive, I downloaded fresh copies and reinstalled one by one. I don't use a lot of apps apart from Microsoft Office, browsers and iLife and have not installed any additional scripts, extensions or add-ons (like USB Overdrive). It's a pretty clean install.
Since then, although I'm generally happy with Lion, the Magic Trackpad won't work! It does work for a little while with basic gestures - mainly moving the cursor and scrolling - then it gives up the ghost and loses connectivity. I have done the following:
Disconnected and reconnected the MTP after turning it on and off. MTP works for about two minutes, goes crazy then no response.
Shut the computer down, pulled out the plug, waited two minutes, then started up again. MTP works for about two minutes, goes crazy then no response.
Run Onyx, shut down computer, then pulled out plug (see above).
Checked options in Universal Access, shut off "Ignore other devices when trackpad in use" (or whatever the option is). MTP works for about two minutes, goes crazy then no response.
Turned off the Magic Mouse. MTP works for about two minutes, goes crazy then no response.
But none of this seems to work! I know the MTP is connected because I can see it in the BT menu in the menu bar and also in System Preferences. I have noticed since upgrading that my permissions - which when I bought the computer were totally clean - now run lines and lines about "Library/Core Services" so I am unsure whether this is related. I also notice a lot of people are in the same boat as me, which makes me wonder if it's either a hardware issue or a release issue - after a week or so of totally silent running, my 2TB Hitachi HDD started up with the grumbly tum. I'd really appreciate any tips from anyone out there!Hi, marksaner
You could try installing the latest version of the Synaptics driver. Synaptics is the company that makes the UltraNav driver and drivers for many other computer brands. This driver should have the same functionality as the UltraNav driver, so there's no worry there. You can find the driver here.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it. -
HP LaserJet printer won't work following update
I have just installed the latest Apple update for HP Laserjet printers (9 Sept 2008), and now my HP 2605dn color LaserJet printer won't work. Most applications just quit when I try to print; MS Word just hangs at the dialog box when I press Enter.
I can access the printer utility OK via the Print Preferences.
Has anybody any thoughts why this should be so, and how do I proceed to get my printer working again?
Thanks.OK, I have just answered (part of) my own question.
Re-installing the HP Laserjet package has duplicated drivers for most of the HP laserjet printers in my list of drivers. If I select the second entry of the two identical appearances of the drivers for my printers, they start working again; if I select the first appearance they don't work. So now my printers are working again.
This still doesn't explain why Software Update prompted me to re-install an already installed package. It also gives me the issue of removing all the duplicate entries from my list of drivers, unless I am prepared to live with the clutter and waste of HD space. Any thoughts about how to do this without bombing my printers again?
Thanks.
Maybe you are looking for
-
Hi all, I developed the sample in the link http://www.oracle.com/technology/products/jdev/11/cuecards/adf_set_21/ccset21_ALL.html step by step. But I receive an error when I run the project. The error I get is : WARNING: ADFc: Error while selecting e
-
Purchase order text in info record
Hi!! I want to clean purchase order texts of all info records. How Can i know that info records have Purchase order texts?, Which table can i use?. Thanks, Regards.
-
When I try to install Adobe Acrobat XI Pro, I get an error message, "Key not valid for use in specified state". What is this?
-
2007 Jan 27th - UK - I need to add 3 more 750gb drives to my Mac Pro
Hi Anyone have a good feeling for the best 3 750gb drives to add to my initial 500gb Hitachi HDS725050KLA360 that is fitted as standard. I have heard that Seagate barracudas have some problems. Any concrete benchmarks or actual users war stories woul
-
Application registered with shared services registry 11.1.2.1 - interesting
Here is an interesting situation. Our HFM application has 4 to 5 AD groups in shared services. All groups are ok except one group which keeps dropping out of shared services. Hence the users loggin in from that domain couldnt connect and get the mess