Prefix timestamp before the name of the file

Hi Experts,
Can we prefix timestamp before the name of the file?
Generally file name followed by timestapm instead of that
can we add timestamp before file name? .If so please let me know .
thanks in advance
N.P.Babu

Hi,
all you need to do it to create the filename
in one of the tag in your xml message and
then use variable substitution:
refere to Variable Substitution section on this page
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
it's easy but using
Adapter-Specific Message Attributes
with sp14 is much better
Regards,
michal

Similar Messages

Verizon Chat advises pdf attachment non-download from AOL email is a software problem and directs me to Apple Support. I see "can't access cellular data network" in an instant before the file's icon turns into the file's name.

Verizon Chat advises pdf attachment non-download from AOL email is a software problem and directs me to Apple Support. I see "can't access cellular data network" in an instant before the file's icon is replaced by the file's name. In Inbox three emails in a row show there is an attachment. My iPad 3rd gen. runs 7.1.

You have Acrobat Pro on your system. It will try to open PDFs, and of course it will fail. You must uninstall it. Then, you will need a PDF reader. So install Adobe Reader. That seems quite simple, but perhaps something is wrong. If anything goes wrong with these two steps (1) uninstall Acrobat Pro (2) install Adobe Reader, then please let us know the details.

Does the EBCC takes the timestamp of the files into account when the synchronisation occurs?

We are running WL Portal 7.0 sp2.
I had to re-deploy an older version of our portal application.
I put back the old portal webapp and ran the EBCC to synchronize the approprate
portalApp-project.
In the EBCC I specified "Update all the files in the project." but after the deployment
I received several stacktraces concerning webflows that couldn't be found.
Does the EBCC takes the timestamp of the files into account when the synchronisation
occurs?

tomk wrote:
The PKGBUILD has a depends array and a makedepends array. Anything that's required at runtime goes in the depends array, and must be installed for the application to run successfully. Anything that's only required at buildtime foes in the makedepends array, and can be removed from the system after the application has been built.
man PKGBUILD and various wiki pages for more details.
Anything that's only required at buildtime foes in the makedepends array, and can be removed from the system after the application has been built.
==================
Who remove them ? user or the abs ??
I think the best method is file dependence , not package dependence.....
Software is arranged by package. but its dependence is file. When Install a package, pacman check its file dependence, and install the packages which include those files....
If a not explicit installed package 's file does not required by any other packages , it can be removed automatically !
In this situation ,pacman can find packages that not needed after compilation, and remove them.
Last edited by iamybj (2010-03-22 03:15:06)

Can't open MPEG that opened before: "The file is not a movie file."

I have an unusually large (for me) MPEG file that I succeeded in downloading and viewing sometime in the last year and a half, and I kept it on my disk despite its being over 3GB because I thought I might want to look at it again. Now I do, only it won't open: "The movie could not be opened. The file is not a movie file." I tried using Time Machine to bring back earlier versions of QuickTime - 7.5 and 7.5.5 as I recall; I now have 7.6.2 - but these wouldn't open the file either, so I figure it may have something to do with a change in the system. In any event, should it be possible to open this file (again, it did open previously, with no problem), and if so how? Thanks.

I have a similar major problem and wonder if it its to do with file sizes or codecs. I recorded video at work from a laparoscopic medical camera and output the video at the end of the session from the device's hard-drive to my 16GB memory stick. It is a 750Mb with file extension .mp4 and I now get exactly the same message as others if try to open it with Quick time (I can't open it with anything else either and nor could our medical illustration department). I bought the quick time pro upgrade as was told that would probably work and got same problem. Interestingly, I have had a second problem today having worked on a separate movie I put together in i-movie that I had recorded from a hi-def panasonic camcorder, imported and successfully edited (with ease) in i-movie and exported it "uncompressed" as a quicktime movie. It was only 5mins of video and produced a 15GB file. I wanted to save this onto a 16GB memory stick, but found out that the FAT32 folder system doesn't allow that file size! So, I formatted the memory stick to "Mac extended journalled", and was able to save the entire file onto the stick. But, now it won't open in quick time! I get the same message as above! Does anybody have any idea what these two issues might be?

Timestamp when the file was modified

Hello everybody,
Is there a way to do the following:
When a forms specific field line is modified, the username (which was used to logon to a computer) and the current time would be entered to a specific field in the form?
Using: Adobe ES 8.21xxxx
Many thanx in advance

You can get the current time in HH:MM:SS format by using the below syntax in FormCalc.
$host.messageBox(Num2Time(Time(), "HH:MM:SS"));
For different formats please check the help in your designer.
I am not sure about getting the user name from the local computer. I am under the impression that it is not allowed to read the local user specific information for security reasons but I could be wrong.
Thanks
Srini

IOS 8: Spoken audio or speech stops before end of the file

Hi,
I try to use iTunes Match on my iPhone (iPhone 6 , iOS 8 latest version). Uploaded files like audio books or other spoken files stop about 30 seconds before the file ends. Unfortunately I can't fix the problem. What can I do?
It's the same playing the files from the cloud or playing them after downloading.
It's the same to third party player like écoute.app.
This problem doesn't arise with music files.
Who can help me?

Well, in early iTunes Match days all worked fine with these files. This problem appears since itunes shows the german information "Bestimmung der Information zur unterbrechungsfreien Wiedergabe" (translate.google.de: "Determination of Information for Seamless playback").

When opening a folder, its takes ages to show the files

Hi All,
I have a 2012 Macbook Pro running Lion (as you can probably guess!), with a 512Gb SSD and 8Gb Ram. Its a pretty fast machine and i'm really happy with the way it runs, however when I open a folder to view files, it opens and shows a blank folder and then I get the black pinwheel in the bottom left/right hand side and I have to wait for sometimes over 30 seconds before the files in that folder are shown!?
Does anyone have any ideas why this happens? One thing to point out is that it doesn't always happen and its not restricted to particular folders. I can open a folder and it will show the files straight away, however I can re-open that folder and it will take up to 30 seconds to show the files...
I've tried rebooting and running nothing, but it still happens. And I have also tried the normal disk utilities to check permissions, etc and I think these are fine too..
You guys are my last hope before I start to talk to apple and log a support call - Help!
Cheers

First off, I do not recommend looking at your time machine while it is running. You can tell if it is running by making sure its menubar icon is shown in Apple menu -> System Preferences -> Time Machine. If the icon is moving, it is running. You can manually backup, which I recommend over automatic backup, as automatic backup can get in your way. Spotlight, if it is indexing (check the menu in the upper right that looks like a magnifying glass), will also slow matters down, and adding things you don't want Spotlight to search to your Apple menu -> System Preferences -> Spotlight -> Privacy pane will help. Note this affects areas you can search in Time Machine as well. If searching content of files is of little interest to you, I find Find Any File much quicker for finding by file name. Backup when you aren't doing anything else, as otherwise, you may find yourself backing up files that haven't had the opportunity to close.
Time Machine also works best if your destination drive is at least twice as capacious as your source drive. Otherwise it is spending a lot of time trying to find places for the archived files, and barely is more archival than a simple clone.

CS5: Could not complete your request because the file is not compatible with this version of Photosh

After several hours creating a PSD file in Photoshop CS5 I attempted to revert some changes and got this error "Could not complete your request because the file is not compatible with this version of Photoshop".
I closed the file and restarted Photoshop and still get this error.
I restarted the computer and still get this error. Now my hours of work are WASTED!
This file was created using Photoshop CS5 Extended and was never in any other software.
Details:
Mac Photoshop CS5 (12.0 running in 32 bit mode)
File had a video layer (h.264)
MaxBook Pro 2.8Ghz
OSX 10.6.3

I was able to open the file in Photoshop CS2 and all layers were intact. PS CS2 gave me the message: "A layer is corrupt and will be discarded." Turns out that was the video layer. The file itself was fine and I am again working on it in PS CS5.
Which leads me to ask: If a video layer gets corrupted why can't PS CS5 open it?
PS CS2 had no problem opening the file, it just flatteded the video layer - it even kept the current key frame.
Additional info: Just before the file went bad I made a level adjustment to the video layer and set a keyframe in the animation panel. Then I saved and got the error "Could not complete your request because the file is not compatible with this version of Photosh' in Photoshop Macintosh". Also the source H.264 video file appears to be fine, it's only a 5 second clip and it play fine in every app - even PS CS5.

Timestamp in Java log and trace files.

Hi SAP'ies
Running PI 7.11 on AIX 6.3 we face an issue with the content of log and trace files from Java.
Eg.
The file DefaultTrace_00.0.trc is timestamped 18-05-10 11:16:15. (The same time as the time of the OS/AIX)
Looking inside the file the last statement is timestamped 2010 05 18 09:16:15.
How can we ensure that the content of these Java files are timestamped with OS time?
Looking into ABAP files like dev_w0 the timestamp of the file and the content are equal.
Best regards,
Teddy Løv Andersen

Hello All
Best way to convert the default trace time is , visit the site
http://www.csgnetwork.com/epochtime.html
here enter , for example if you have the following in default trace
#1.#00265510DE7300120000000F000022030004C77AD7309DF5#1345230317066#com.sap.portal.fpn.rdl
1345230317066 is time stamp , enter this in the above site to get the time
Fri Aug 17 2012 21:05:17 GMT+0200
Regards

How do you change name of the files before sending files to FTP site?

Hi guys,
my environment is SQL Server 2008 R2.
Currently, I'm trying to figure out how to tackle the following project:
I have over 100 files that I need to send via FTP on daily basis.
Before doing so, I must change the extension of the file to a specific characters stored in a sql server table, for example if the file name is Store1.txt the new name will be Store1.111
I was hoping that you guys can point me in the right directions :-)
Codernater

I would use a script task for renaming, Pass the data from the SQL table with the extension you want via a object variable to the script task iterate the files in the directory and rename as requried
this code and link would help you
http://stackoverflow.com/questions/12347881/renaming-files-in-folder-c-sharp
DirectoryInfo d = new DirectoryInfo("....");
FileInfo[] infos = d.GetFiles();
foreach(FileInfo f in infos)
File.Move(f.FullName, f.FullName.ToString().Replace("abc_","");
Abhinav http://bishtabhinav.wordpress.com/

Can we remove timestamp which is added infront of the file name, in archive

Can we remove timestamp which is added infront of the file name of datafile which was imported succesfully , in archive folder, i have a requriment to move file from archive folder to another folder, but programmer is finding diffficulty in moving the file which has time stamp, he can move file with date stamp, but not able to move file which has time stamp, is there is any option in MDIS.Ini file or anywhere in import manager or console to modify the file names , or remove timestamp when file is moved in archive folder.
does anyone faced similar issue, require help.........

Hi,
Moving file from Ready directory to Archive directory is MDM internal process and I strongly feel it is not possible to control the naming convention of File to be placed in Archive directory.
But you can explain what problem you developer is facing while moving file from Archive directory to some other directory..then we can think about solution to acheive this. Also on which operating system you MDM server is installed.
Regards,
Shiv

I have difficulty pasting text into the file name field(prefix only) while saving files.

OS: WinXP sp3
FF: 3.6.3
I have difficulty pasting text into the file name field (prefix only) while saving files. example: File name is Pic123.jpg and I want to rename it ABC123.jpg and I have ABC loaded into the WinXPsp3 clipboard. When I highlight\right-click\delete "Pic" then attempt to paste the ABC, I get either no reaction, or upon multiple paste attempts, the ABC is appended to the end of the file, after the extension, as "Pic123.jpgABC". If I delete this unwanted suffix, or repeat the process several times, eventually I can delete the unwanted portion of the prefix and paste the desired text. Sometimes it works fine first try, but mostly it takes several tries. I'm using Firefox 3.6.3 but the problem existed in whatever previous version I had too. This issue only occurs when using the delete/paste; I can always manually change the name by typing. Thank you for your help.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
A possible cause is that the server sends a wrong response header.
The server may not comply to RFC 5987 and sends a wrong Content-Disposition:attachment; filename header.
* https://developer.mozilla.org/en/Firefox_8_for_developers#Network

Use of ( * ) prefix before the table name

Friends,
Can anybody clear me the importance of prefixing the *(asterik) before the table name in the program.
Eg. Tables: *mara,
*cstk.
Many Thanks,
Albert.

When you need two distinct work areas of the same database table in your program, you can use two tables declarations like
Tables: mara, *mara.
Typical use is on a screen, that has a table control. Here same table fields may appear on the main screen as well as in the table control. You use normal work area ( mara) to refer to main screen fields and the other work area ( *mara) for table control fields.

HT203164 How do I fix a problem when downloading cd into iTunes, "the file name is invalid or too long"? I have never had this problem before until recently.

The message "the file name is invalid or too long" pops up when I try to download a cd onto iTunes. I never had this problem before but lately it has been happening. What can I do to fix this?

iPhoto Menu ->
Preferences ->
Accounts ->
Delete and recreate your email settings.
Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

When I download something from the Web, the "Downloads" window opens, but the window remains blank. Before it used to at least show the name of the file and I could open the file from the "Downloads" window. Is there a way to get this functionality back?

I'm running Windows XP which is updated to latest version (which I think might be Service Pack 3, but not positive.) Mozilla Firefox is version 5.0. I tend to use Google as my search engine so most of the stuff I download comes through sites found through Google, which is also updated.
At some time in the past (maybe a few versions ago) when I would download a file from the Web, the "Downloads" window would open and in the window would be displayed the name of the file I was downloading or had just completed downloading. I think I used to be able to then click on that file name and the file (or the installation file if needed to start the new program) would open. I am currently using Firefox 5.0 (the "About Firefox" screen says this is up to date) and when I download a file or document, the "Downloads" window appears on the screen as it always has in the past, but it remains blank, i.e., nothing appears in the downloads box. I don't remember making any configuration changes, etc., that may have caused the window to remain blank, but I could be mistaken. I know how to find the items I've downloaded (My Documents / Downloads) and can usually guess what the name of the downloaded file might be, but it used to be much easier when something (anything) showed up in the downloads window.
I'd love for someone to tell me about a simple fix for this. I'm willing to be quite embarrassed that I did something I shouldn't have.'''

In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Prefix timestamp before the name of the file

Similar Messages

Maybe you are looking for