Preflight objects uses no CMY, but only K?

In Acrobat there are a lot of really great preflights, but I haven’t found a bulletproof check to analyse if there are objects on the CMY-seperations. This would be a timesaver for checking pages which are going to be printed in black only.
The preflight ‘Object uses spot color(s) or Black only (no CMY)’ doesn’t work for CMYK objects with with 0% CMY in it (for example: 0.0/0.0/0.0/1.0). The default black swatch in InDesign is also a CMYK-object :-( I have a sample pdf here, with some characters in rich black and the rest in single black only.
Is there any other preflight in Acrobat that I can use? I’ve tried most of them, but none of them seemed to work.
Thanks in advice!
Roel

You don't say what version of Acrobat it is you have doubts about. I would say that for the question you are raising, version 8 of Professional is very reliable. but since you are placing these ads in InDesign (you don't mention what version of that either), you can use ID's preflight, and also check the separations panel to see if there is any RGB on that page.
As for registration color, it will print on ALL plates, not just CMYK. The problem with having anything in that color besides register and crop marks is that the ink density will be 100% for each of the colors printed, so 400% for a CMYK job. That needs attention.
Al

Similar Messages

I am trying to pair my cell phone and tablet using Messages App, but only MMS messages will come through on my tablet. I've tried pairing and unpaired, reinstalling app on my tablet, and can't figure it out. Any idea how to fix this?

I am trying to pair my cell phone and tablet using Messages App, but only MMS messages will come through on my tablet. I've tried pairing and unpaired, reinstalling app on my tablet, and can't figure it out. Any idea how to fix this?
Thanks

I Shared my most ridiculous situation but didn t log under your problem.
sorry, I gave you your answer under sunshine99 or Dianna. I want out and you want in.
if you not find just email me at [removed]
thanks
Personal information removed as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

Is it possible to update the human task payload without using worklist API but only using advance routing rule.

Hi,
I have one human tasks in BPEL process in which i am using different stages and with using advance routing rules i am routing my task payload to one stage to another.My payload has Task Status and Branch,after approving the human task from first stage I want to send modified value of the Task Status to the next stage without using worklist API or manual updation but only using the advance routing rules,is it possible ??? If anyone have any idea about this than please enlight me with your valuable solutions and advices...
Thanx
Regards
Ajral

Hi SamGoe,
According to your description, my understanding is that you want to update the PoerPoint slide from SharePoint 2010 slide library automatically.
It seems to be not necessary to use Macros. SharePoint provides an OOB way to notify you to check for update to the slide library slides when you open the presentation. PowerPoint does this because you selected the option
Tell me when this slide changes when you copied the slides from the library.
More information, please refer to the link below:
http://office.microsoft.com/en-us/powerpoint-help/sharepoint-slide-libraries-ii-use-slides-in-the-library-RZ010254089.aspx?section=6
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Can't use ssh publickey, but only for a single host

I've been using publickeys for a long time to connect my laptop to my server, but lately I can't connect when I'm in this place only.
It is the same key and it works perfectly, except when I'm in this specific network. And it doesn't seem to be a firewall issue, because the remote server actually logs the attempt.
I'm all out of ideas. Nothing I try has any effect.
ssh -vvv
OpenSSH_6.1p1, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /home/<user>/.ssh/config
debug1: /home/<user>/.ssh/config line 14: Applying options for <host>
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to <host> port 443.
debug1: Connection established.
debug3: Incorrect RSA1 identifier
debug3: Could not load "/home/<user/.ssh/id_rsa" as a RSA1 public key
debug1: identity file /home/<user>/.ssh/id_rsa type 1
debug1: identity file /home/<user>/.ssh/id_rsa-cert type -1
debug1: identity file /home/<user>/.ssh/id_dsa type -1
debug1: identity file /home/<user>/.ssh/id_dsa-cert type -1
debug1: identity file /home/<user>/.ssh/id_ecdsa type -1
debug1: identity file /home/<user>/.ssh/id_ecdsa-cert type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_6.1
debug1: match: OpenSSH_6.1 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_6.1
debug2: fd 3 setting O_NONBLOCK
debug3: put_host_port: <host>:443
debug3: load_hostkeys: loading entries for host "<host>:443" from file "/home/<user>/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/<user>/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug3: order_hostkeyalgs: prefer hostkeyalgs: [email protected],[email protected],ssh-rsa
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: [email protected],[email protected],ssh-rsa,[email protected],[email protected],[email protected],[email protected],[email protected],ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-dss
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: [email protected],zlib,none
debug2: kex_parse_kexinit: [email protected],zlib,none
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1
debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected]
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit: none,[email protected]
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit:
debug2: kex_parse_kexinit: first_kex_follows 0
debug2: kex_parse_kexinit: reserved 0
debug2: mac_setup: found hmac-md5
debug1: kex: server->client aes128-ctr hmac-md5 [email protected]
debug2: mac_setup: found hmac-md5
debug1: kex: client->server aes128-ctr hmac-md5 [email protected]
debug1: sending SSH2_MSG_KEX_ECDH_INIT
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: <host key>
debug3: put_host_port: <host>:443
debug3: put_host_port: <host>:443
debug3: load_hostkeys: loading entries for host "<host>:443" from file "/home/<user>/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/<user>/.ssh/known_hosts:1
debug3: load_hostkeys: loaded 1 keys
debug3: load_hostkeys: loading entries for host "<host>:443" from file "/home/<user>/.ssh/known_hosts"
debug3: load_hostkeys: found key type RSA in file /home/<user>/.ssh/known_hosts:11
debug3: load_hostkeys: loaded 1 keys
debug1: Host '<host>:443' is known and matches the RSA host key.
debug1: Found key in /home/<user>/.ssh/known_hosts:1
debug1: ssh_rsa_verify: signature correct
debug2: kex_derive_keys
debug2: set_newkeys: mode 1
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2_MSG_NEWKEYS received
debug1: Roaming not allowed by server
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug2: key: /home/<user>/.ssh/id_rsa (0x1d61230)
debug2: key: /home/<user>/.ssh/id_dsa ((nil))
debug2: key: /home/<user>/.ssh/id_ecdsa ((nil))
debug1: Authentications that can continue: publickey
debug3: start over, passed a different list publickey
debug3: preferred publickey,keyboard-interactive,password
debug3: authmethod_lookup publickey
debug3: remaining preferred: keyboard-interactive,password
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering RSA public key: /home/<user>/.ssh/id_rsa
debug3: send_pubkey_test
debug2: we sent a publickey packet, wait for reply
and this is the log from journalctl
Mar 27 09:38:29 xen sudo[29258]: pam_unix(sudo:session): session closed for user root
Mar 27 09:38:32 xen sshd[29196]: debug1: Forked child 590.
Mar 27 09:38:32 xen sshd[590]: Set /proc/self/oom_score_adj to 0
Mar 27 09:38:32 xen sshd[590]: debug1: rexec start in 5 out 5 newsock 5 pipe 7 sock 8
Mar 27 09:38:32 xen sshd[590]: debug1: inetd sockets after dupping: 3, 3
Mar 27 09:38:32 xen sshd[590]: Connection from <host> port 54330
Mar 27 09:38:32 xen sshd[590]: debug1: Client protocol version 2.0; client software version OpenSSH_6.1
Mar 27 09:38:32 xen sshd[590]: debug1: match: OpenSSH_6.1 pat OpenSSH*
Mar 27 09:38:32 xen sshd[590]: debug1: Enabling compatibility mode for protocol 2.0
Mar 27 09:38:32 xen sshd[590]: debug1: Local version string SSH-2.0-OpenSSH_6.1
Mar 27 09:38:32 xen sshd[590]: debug1: permanently_set_uid: 99/99 [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: list_hostkey_types: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: SSH2_MSG_KEXINIT sent [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: SSH2_MSG_KEXINIT received [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: kex: client->server aes128-ctr hmac-md5 [email protected] [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: kex: server->client aes128-ctr hmac-md5 [email protected] [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: expecting SSH2_MSG_KEX_ECDH_INIT [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: SSH2_MSG_NEWKEYS sent [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: expecting SSH2_MSG_NEWKEYS [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: SSH2_MSG_NEWKEYS received [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: KEX done [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: userauth-request for user <user> service ssh-connection method none [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: attempt 0 failures 0 [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: PAM: initializing for "<user>"
Mar 27 09:38:32 xen sshd[590]: debug1: PAM: setting PAM_RHOST to "<host>"
Mar 27 09:38:32 xen sshd[590]: debug1: PAM: setting PAM_TTY to "ssh"
Mar 27 09:38:32 xen sshd[590]: debug1: userauth-request for user <user> service ssh-connection method publickey [prea
Mar 27 09:38:32 xen sshd[590]: debug1: attempt 1 failures 0 [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: test whether pkalg/pkblob are acceptable [preauth]
Mar 27 09:38:32 xen sshd[590]: debug1: temporarily_use_uid: 1000/100 (e=0/0)
Mar 27 09:38:32 xen sshd[590]: debug1: trying public key file /home/<user>/.ssh/authorized_keys
Mar 27 09:38:32 xen sshd[590]: debug1: fd 4 clearing O_NONBLOCK
Mar 27 09:38:32 xen sshd[590]: debug1: matching key found: file /home/<user>/.ssh/authorized_keys, line 1
Mar 27 09:38:32 xen sshd[590]: Found matching RSA key: <key>
Mar 27 09:38:32 xen sshd[590]: debug1: restore_uid: 0/0
Mar 27 09:38:32 xen sshd[590]: Postponed publickey for <user> from <host> port 54330 ssh2 [preauth]
And it just hangs there forever.
If I try to use the same key to log in to other servers (one debian and an openWRT router) it works just fine from this location. This key also works to log in to the archlinux server if I'm on other networks, such as my college's or my other workplace.
Any help is very appreciated. As it stands, I have to log in to my debian server and from there I have to log in to my archlinux server. I wish I could just log in directly as I've done many times in the past.

Hi,
I don't know whether you've solved the issue in the meantime (your issue was three months ago), but I thought I'd post this reply just to let other people who run into this problem know what happened to me and how I solved it.
I had exactly the same problem as you had. The logging in stopped at exactly the same point in the debugging trace. I too was experiencing the problem from a single network (multiple hosts on the network could not log onto a remote server). Logging into the remote server from other locations (even with the same laptop) worked fine.
The problem turned out to be an MTU problem in my case. I was running an OpenVPN connection to the remote server, and I was logging into it over the VPN. No problems, usually, except for the fact that the network that I was logging in from is a glass fiber network using PPPoE. The MTU on that link is 1460 bytes, not the 1500 bytes that is more common. I had to reconfigure the OpenVPN interfaces (using the OpenVPN configuration options "mssfix 1360", "fragment 1360" and "tun-mtu 1400" on both sides of the connection) to use a smaller MTU on the OpenVPN tunX interface, and everything started working normally again.
Obviously, the MTU was wrong for every connection going over the VPN, but the OpenVPN tunnel was somewhat resistant to this mistake because I turned on LZO compression, which made most packets that were transmitted over the OpenVPN interface (tunX) that were using an MTU of 1500 bytes smaller than the maximum allowed on the actual link. Anyway, the lesson is: set up your MTUs on your links correctly. And turn on "mssfix" so that if you're routing remote hosts' traffic over the OpenVPN tunnel, their TCP stacks will be made aware of the actual MTU of the link.
Hope this helps somebody,
Sven

Need to use Group By but only want to group some of the columns not all

Hello all! I am having some issues here. I am rather new to SQL and I am getting stuck with grouping. I have the query below but I only want to group by these columns, instead of all the columns in my select statement.
ah.fund,
ah.dept,
ah.org,
ah.acct,
t.fund,
t.dept,
t.org,
t.acct
This will eventually go into Oracle reports builder. Is there any way I can archive this at all? The query will return all the t for a given time period, but they need to be grouped by the fully qualified account number which consists of the fund, dept, org and acct columns.
Thanks in advance!
SELECT ah.fund,
     ah.dept,
     ah.org,
     ah.acct,
     LPAD(ah.fund,3,0)||LPAD(ah.dept,2,0)||LPAD(ah.org,4,0)||SUBSTR(ah.acct,1,2) acct_no,
     LPAD(ah.fund,3,0)||LPAD(ah.dept,2,0)||LPAD(ah.org,4,0)||ah.acct acct_no1,
     t.fund,
     t.dept,
     t.org,
     t.acct,
     t.ACTIVITY_DATE,
     t.TYPE,
     t.AMT,
     t.description,
     t.TRANS_NO,
     t.RECEIPT_NO,
     DECODE(t.PO_NO,NULL,t.JOURNAL_NO,t.PO_NO) J_NO,
     DECODE(t.WARRANT_NO,NULL,t.WIRE_NO,t.WARRANT_NO) W_NO,
     t.VENDOR_NO,
     v.name||' ' ||v.first_name name,
     MIN(ah.eod_date)
FROM ah,
     t,
     v
WHERE ah.fund BETWEEN SUBSTR(:p_acct_from,0,3) AND SUBSTR(:p_acct_to,0,3)
     AND ah.dept BETWEEN SUBSTR(:p_acct_from,4,2) AND SUBSTR(:p_acct_to,4,2)
     AND ah.org BETWEEN SUBSTR(:p_acct_from,6,4) AND SUBSTR(:p_acct_to,6,4)
     AND ah.acct BETWEEN SUBSTR(:p_acct_from,10,5) AND SUBSTR(:p_acct_to,10,5)
     AND FLOOR(ah.acct/10000) IN (6,8)
     AND SUBSTR(ah.acct,3) != '000'
     AND ah.eod_date BETWEEN :p_from_date-1 AND :p_to_date
     AND t.fund (+) = ah.fund
     AND t.dept (+) = ah.dept
     AND t.org (+) = ah.org
     AND t.acct (+) = ah.acct
     AND TO_DATE(t.activity_date, 'dd-mon-yy') >= TO_DATE(:P_FROM_DATE,'dd-mon-yy')
     AND TO_DATE(t.activity_date, 'dd-mon-yy') <= TO_DATE(:P_TO_DATE,'dd-mon-yy')
     AND t.type IN( 'PI','JE','PR','VD','VU','AC','AD')
     AND (
          (:p_year = TO_CHAR(CURRENT_DATE,'YYYY')
          AND (t.po_no IS NULL
          OR (select TO_CHAR(open_date,'YYYY') FROM r WHERE po_no = t.po_no ) = TO_CHAR(CURRENT_DATE,'YYYY') ) )
          OR ((select TO_CHAR(open_date,'YYYY') FROM r WHERE po_no = t.po_no ) = :p_year )
AND v.vendor_no (+) = t.vendor_no
GROUP BY ah.fund,
     ah.dept,
     ah.org,
     ah.acct,
     t.fund,
     t.dept,
     t.org,
     t.acct,
     t.ACTIVITY_DATE,
     t.TYPE,
     t.AMT,
     t.description,
     t.TRANS_NO,
     t.RECEIPT_NO,
     DECODE(t.PO_NO,NULL,t.JOURNAL_NO,t.PO_NO),
     DECODE(t.WARRANT_NO,NULL,t.WIRE_NO,t.WARRANT_NO),
     t.VENDOR_NO,
     v.name||' ' ||v.first_name
ORDER BY LPAD(ah.fund,3,0)||LPAD(ah.dept,2,0)||LPAD(ah.org,4,0)||SUBSTR(ah.acct,1,2),
     LPAD(ah.fund,3,0)||LPAD(ah.dept,2,0)||LPAD(ah.org,4,0)||ah.acct;

In reports builder you can group the columns without having to group it in your query. It is also known as the break report which contains multiple groups in its data model.
    |            Q_1               |
                  |
                  |
    |       GRP_department         |
    | dept_no                      |
    | dept_name                    |
                  |
                  |
    |         GRP_employee         |
    | emp_no                       |
    | emp_first_name               |
    | emp_last_name                |
    | emp_middle_name              |
    | emp_date_of_birth            |
    | ...                          |
    ------------------------------

How to access SMP if I don't use SAP product but only MaxDB?

Hi All,
I am sorry if this is answered elsewhere, I am a MaxDB user and our company operates a website with MaxDB as the data engine behind it since 2003. Recently I am evaluating if we can use synchronization to scale out, however I hit road blocks when I research information and most are on SMP which requires a login. How can I get access there ?
Regards,
Chris

Hi Chris,
the SAP Service Marketplace is for SAP customers only.
Anyhow, especially for MaxDB there are many information available for public use.
There's the [WIKI|https://www.sdn.sap.com/irj/scn/wiki?path=/display/maxdb/main] and the [MaxDB Website|http://maxdb.sap.com/] that includes online searchable documentation, as well as trainings materials and presentations from the MaxDB events.
A good starting point is always the [MaxDB Homepage here in SDN|https://www.sdn.sap.com/irj/sdn/maxdb].
If you don't find your questions answered with these options, you can always post your question here to the forum.
Anyhow, what information did you want to look up and only find them in the SAP notes on SMP?
Especially if you're an "Open Source"-MaxDB user, most of the available documentation is already made accessible via the resources I mentioned.
regards,
Lars

Iphone says i have used 12.5gb but only got 700mb left

Hi,
I have just checked my Iphone 5c storage on my phone and pc and it says that I only have 746mb left and I have used 12.5gb of my 16gb storage limit. Where can the other storage have went to? I'm totally stuck as my apps and everything don't add up to 16gb.
Thanks

Some is taken up by the operating system, the rest is explained by the reporting method, just like your computer.
http://en.wikipedia.org/wiki/Gigabyte
How OS X and iOS report storage capacity - Apple Support

Can you have two Apple ID that you use for purchases but only one library?

Okay well the question pretty much asks its all but can you?

Drag all of the music into the library from wherever it is now.
You will have to provide info if you want help.
Where is the music now?
Sogns are songs. You can put them anywhere you like.

Can use the internet but only one computer at a time...

I have a very old PC with no ethernet ports and i have one macbook pro. I just bought an airport base station and have connected it to my modem via an ethernet cable, and the modem is then connected to my PC via USB.
This set up allows me to connect wirelessly with my macbook pro, but if i want to connect to the net via my PC it won't let me...unless i turn off the base station and then reboot the modem. but now i can't connect wirelessly.
Apple guys say, because I'm not connected directly to the PC from the base station (due to no ethernet ports) I'll never get round this problem. Before I give up, is there any thoughts on how i can resolve this catch 22?
Macbook Pro Mac OS X (10.4.6)

When I encountered the same problem a while back, I discovered that I had mistakenly connected the ethernet cable from my modem into one of the <-----> (ethernet) port on the back of my Airport instead of the O (WAN) port.
It belongs in the O port.
I hope your problem is this simple to solve.

Trying to export QuickTime but only the first 30 seconds exports

I'm trying to export my 3 minute long project using QuickTime conversion but only the first 30 seconds of the sequence exports. How do I get the full video to export?

If you're trying to export it to WMA or WMV, you need to purchase a version of Flip4Mac which includes that capability. QuickTime cannot create files in those formats without third-party software which provides the necessary engine; even though it appears that QuickTime is doing the conversion, it's not.
(43184)

How to match filters to moving object using motion tracking ?

Hi:)
Excuse me for imperfect english.
I'd like to perform the famous face wrao effect that I've seen in a tutorial for ADOBE AE.
I've to match move a filter (like distortion-bulge) o a moving object using motion tracking, but i've nit able to perform it.
(I want to distort an eye in a face that moves it)
THanks

Specialcase gives an excellent tutorial here:
http://motionsmarts.com/tutorials/matchmove1/mm1.html
Patrick

My phone says there's 0 bytes available but only 6 GB are used the phone is supposed to be 8 GB I have no pictures at all and only 6 apps this is really bothering me please help I can't even take pictures because it says I've no storage

My phone says there's 0 bytes available but only 6 GB are used the phone is supposed to be 8 GB I have no pictures at all and only 5 apps this is really bothering me please help I can't even take pictures because it says I've no storage I also have no messages at all

My iPhone is a 16GB and it says 9.0GB Available and 3.7GB used; I suspect the missing 2.3GB is occupied by the system software.

How can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

how can you use iMessage between 3 iPads with 3 different users but only one Apple ID?

No you do not need separate Apple ID's in order to use 3 devices with one Apple ID. I use 4 devices to Message and FaceTime and all use the same Apple ID. You do need to add additional email addresses for the other devices.
Look at this very informative video for the instructions.
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

I need to use up all my credits in ITunes but only have $.25. How do I do this as nothing is worth $.25? The reason I need to do this is to change my country for purchases on my Credit Card that is not a US credit card

I need to use up all my credits in ITunes but only have $.25. How do I do this as nothing is worth $.25? The reason I need to do this is to change my country for purchases on my Credit Card that is not a US credit card

Click here and ask the iTunes Store staff to zero your account balance.
(114902)

Can you help me on something? I restored my iPod and everything I had was gone. (What I Wanted) But then when I looked at my Usage It said I only have 22.5 GB Available and I Used 6.0 But I didn't. I also looked at my Backup storage and it still had all o

Can you help me on something? I restored my iPod and everything I had was gone. (What I Wanted) But then when I looked at my Usage It said I only have 22.5 GB Available and I Used 6.0 But I didn't. I also looked at my Backup storage and it still had all of my backup from before I restored. I deleted all my backup because it said I used all of my Backup Available. And now when I try and backup it says there is no more room or whatever to backup and Its 5/5.

You are not addressing Apple here. We are all just users like yourself
lost/stolen
No app on the iOS device is required.
- If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
- You can also wipe/erase the iOS device and have the device play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
- There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

Preflight objects uses no CMY, but only K?

Similar Messages

Maybe you are looking for