Preflight Warning, but no problems
I have a book with multiple documents. I haven't worked on this project for many months, and I'm having trouble getting myself back into it. I'm using CS3, and my mac was recently upgraded to snow leopard.
The book indicates a yellow warning triangle next to some of the filenames. When I run pre-flight, I also see the warning. However, I do not see any problems.
For example, there is a warning next to Links and Images, but then it says:
Links and Images: 2 links found, 0 modifiied, 0 missing
Images: 8 embedded, 8 use RGB color space
Well, I need more clarification than that. I don't see a problem, so I don't know what I'm supposed to fix.
Any guidance?
Thanks
Marion
The yellow triangle next to the filname indicates
That the file was opened and saved when the book wasn't open
OR
That pages have been added or delted from that document - meaning you need to UPdate the Page and Section Numbers
Similar Messages
-
My 27" Imac (A1312/EMC2390) keeps shutting down unexpectedly with no warning or "screen of death". So far I reset the SMC, and zapped the PRAM. I even replaced the power supply but the problem continues. My error and system logs seem unhelpful too. Can anyone help me out?
You can get a shutdown like that if the computer gets too hot. Make sure the air intakes on the bottom and the exhaust vent on the top are clean and are not blocked by something in your workspace like papers or the back of the computer being too close to part of the furniture. You need a good six inches (15cm) of clearance between the exhaust slot and other objects or surfaces.
Anti-virus/internet security software, especially the "pay for" kinds, can increase operating temps. So can third-party backup software furnished with many "name-brand" external hard drives.
Fan motors and/or temperature sensors can fail. If you have the original grey disks that shipped with your iMac, find the on that has Apple Hardware Test (AHT) and run it. If you have a failed heat sensor or fan motor, it will detect it with an error code containing "SNS" if it's a bad sensor or "MOT" if its a bad fan motor.
AHT instructions here:
http://support.apple.com/kb/HT1509
Also see if your iMac 27 falls under theis Apple Repair Extension Program:
iMac 1TB Seagate Hard Drive Replacement Program -
Since I installed Nero 2014 I get an error message when I start iTunes that registry settings for importing and burning cds/dvds have changed probably due to other burning software installed please reinstall iTunes, which I've done using 'repair' option, but the problem persists. I have been able to import cds to iTunes since I installed Nero, but it won't anymore. Does anyone recognize this problem and have a solution? Thanks for any help. Using Windows 7.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes
If you're still getting the error message (especially when you plug in the Touch), I'd check for a device filter confusion on the PC. (They can affect the connection of USB devices to a PC, as well as burning and importing CDs.) For that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters -
sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.
sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
I want to pass along a couple of tips that will get you more and better response on this list.
1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
4) If you have a question first search the examples for something tha
t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
Trying to help,
Welcome to the forum!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Hi I buy pack but the problem is you already purchased in-app purchased but it hasn't been downloaded pls fix it for me and I buy before 15 days pack 19,99 and 4,99 and the same problem want or were can I fit it pls
The e-mail for World Strike support is: [email protected]
You need to contact them with your questions. -
please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect
Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.
-
Can some body give me an advice, my cursor can not be controlled (using pad) after I shut it down, and open again. But this problem goes away after I close and open the lid.
Boot from your OS installer disk and run Repair Disk from Disk Utility.
-
When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?
I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain. -
Kernel panic but software problem
Kernel panic (the "You have to restart your computer" message at startup) is said to come from hardware problems but this seems to be a software problem - maybe somebody can help me!
It started slowly with the fans coming on more often than ususally. Then, I had some kernel panics at startup, usually after two or three false stars, the system would load. Hardware Test said everything was OK, Disc Utility corrected a few permission errors, but the problem persisted. I tried everything: Disconnecting everything, removing PCI card, you name it, nothing helped.
Only thing that did help was start over. "Archive and install" was not good enough, I had to start from zero. Which means that all my iTunes library and all the rest waas lost. Made a disc image on an external HD and went for it.
After that, I upgraded to 10.4.11 and tried the migration assistant. Left some of the programs out from the old installation, but took my Documents folder with me. Imported my iTunes library and iPhoto pictures. Until then, everything was perfect. After that point, the fan started its strange behavior again, and today guess what: You have to restart your c.!
So it must have to do with the programs and data that I imported, and not hardware. Have no idea though - anyone run into similar problems?
Apart from standard apps, the only thing I use is Cubase but I haven´t touched it for a long time.Hi, thanks for your reply! I am now trying to rebuild everything using 10.4.7 ... seems the driver for the audio card (m-audio) was at least causing problems. I´ll see if it was the only one. I did the system updates whenever they popped up in software update but there wasn´t even a driver available for 10.4.11.
If that´s not it, I´ll try to use your tips! Thank you! -
After upgrading to Yosemite on my macbook pro,the spinning wheel doesn't go away.I have reset the SMC and the PRAM but the problem still persists.Can anyone please help
Try starting in Safe Mode
OS X: What is Safe Boot, Safe Mode?
Try booting to Recovery and repairing the startup disk
OS X: About OS X Recovery - Apple Support
Reinstall Yosemite
OS X Yosemite: Reinstall OS X
This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum. -
Hello,
I'm having probelms backing up my information to my iCloud account. I tried to reset the account and erase everything in my account but the problem is still there. The problem is that my iPhone is not able to complete the backup process and all it is saying a problem occured.
Someone Pleas let me know how to reset my account, delet everyhting in the Cloud and start a new backup.
Thanks very much,
Dalal TammarWelcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up -
In my iPad 2 with IO6 today I can not send emails from my gmail account, they go to the outbox directly...why? How can i solve this problem? ..I restarted the IPad but the problem was not solved. Please help.
Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you use MobileMe/ iCloud or another server based sync solution like Google or Yahoo?
4. Do other changes to synced information like Address Book content sync successfully back and forth?
Based on your description it sounds like you have a 1 way sync issue. Events sync fine between the iOS devices and fine from the computer to the iOS devices but not from the iOS devices to the computer.
Try:
Backup your computer and iOS devices before doing anything else:
http://support.apple.com/kb/HT1427
http://support.apple.com/kb/ht1766
Ensure all the devices in use are fully up to date: Apple > Software Update / Settings > General > Software Update
Make separate backups of critical data:
Backup your computer Addressbook: http://docs.info.apple.com/article.html?path=AddressBook/4.0/en/ad961.html
Backup your computer iCal: http://support.apple.com/kb/HT2966
Reset syncing on your Mac: http://support.apple.com/kb/TS1627
Reply back if that does not resolve your issue.
Hope that helps. -
All of the music on my Ipod Touch is blown out after I synched it with my new MacBook. I didn't get the 'synch' warning-- but now can't find my library of songs. I'm about to panic!
The iPod backup that iTunes makes does not inlcuded synced media like apps and music. Thes those iTunes are not restored to the iPod unless they are in the iTunes library.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
My friend sold me his iPod touch 3 gen 32gb but the problem is it's disabled an it ses to connect to iTunes an when I do connect it ses first I have to enter the password on the iPod but I can't cuz the screen stays the same what should I do
connect it in recovery mode, then set it up as a new device.
-
My ipod touch displays message" ipod touch disabled,connect to itunes. Ipod touch does no connect with i tunes. I hold on/off switch on ipod touch until Apple log appears on the screen, but the problem persists. Any suggestions ? I am running Itunes 10.6(7) My Mac OS X Version is 10.5.8.
I connected ipod touch to my IMAC while holding on/off switch as stated to by anothe community memberand problem is solved. I wasable to update and reatore. I have been trying to solve the disable problem
for weeks. althou you did not actually solve the problem, In time you probably would. You were on the right track Thank you.
This helped me
rbrookstone
Maybe you are looking for
-
PR release strategy issue comes when Line items in PR added by two different persons, PR Release strategy(overall release) not getting triggered. Release strategy is working fine if i create PR with only one user id. Both id's maintained in classif
-
Hdmi to vga connection using apple tv-2
how can we connect apple tv-2 to a vga projector? what should we use? can we use an hdmi to vga adapter sold separately?
-
CDs Will Not Display in iTunes Source list
1. CDs load to the desktop. 2. iTunes launches and does the CDDB search. 3. CD does not show up in source list. 4. Blown prefs, repaired permissions...same results. Any ideas? Thanks.
-
WL5.1sp8-NSAPI-IE-Status bar shows page is loading for minutes
I'm using WL5.1sp8, NES4.1sp6 on a Solaris 7 to deliver JSP pages over https. I notice that the status bar on the bottom line of IE5 (windows NT) indicates that the page is still loading for minutes, even though the page appears to be complete. What
-
How do I get iTunes Help to work? (v 11)
After entering a term in Help - search, it provides a list of Help Topics that do nothing when clicked.