Preflight warnings for registration color -- how to avoid?

In preflighting, is there any way to turn off registration color and font color warnings when checking for spot colors and non-CMYK colors?
I spend a lot of time tunneling through lists of fonts (that use non-CMYK color in their definitions) and registration color notes for crops, register marks, and so on, just to make absolute certain that the "Object uses non-CMYK color" info doesn't contain anything weird.
I've recently moved from CS3 to CS5 Acrobat Pro 9, and hoped there would be some option to turn off font color and registration color messages.
Thanks.

Non-CMYK elements are flattened (if necessary) and converted to CMYK using the fixups, but then they have to be proofed carefully for problems, so it isn't anything we want to add to the routine unless absolutely necessary.
===
Example alerts:
"Object uses non-CMYK color (52 matches on 1 page)"
In the detail folder (after clicking on the open triangle) there are a dozen or so of these, or close variations:
"Page 1: stroked: 0.25 pt 'Registration color'  Black (0.0) overprint: off"
Plus nested folders labeled:
"... Page 1: Further matches (20 out of 42)
... with nested folders with more alerts in that.
===
If it were a simple list, I could scan it for problem, but with all the nested folders and scrolling, it take a fair amount of time (multiplied by 30 or 40 documents, say).
Thank you for your attention. I really appreciate it, though I think my problem is small. I was just hoping there was a way to "ignore registration color in preflight" somewhere that I hadn't found yet.

Similar Messages

  • Error installing iLife 09 - "run preflight script for Registration"

    Hi,
    I am trying to install iLife 09 and am getting the error above (run preflight script for registration) and cant figure out how to fix it. I have run a permissions repair, rebooted and it just doesnt want to let me install. My Install.app is present in /System/Library/CoreServices/Installer.app and have installed all the latest updates for 10.5
    Any ideas?
    Thanks
    Ian
    Edit: I see this could be in the wrong forum - my apologies - please move to the correct forum.
    Message was edited by: BarnRacoon

    I'm having the same problem. I cannot instal Ilife on my new Imac.
    I first tried to install all programs together via the installation guide. but it kept crashing without any reason.
    after that I tried to install each program seperately via the customized installation guide but again the installation guide crashed.
    for each program the following messages appeared:
    run preflight script for iphoto, Imovie etc.
    So what can I do about this. The warning message said I had to contact the manufacturer.
    Thanks

  • Apple App Store is used for Account. How to Avoid It? How to Delete All Sharing Preferences?

    Every time I go to the Apple App Store, I have intrusion, relentless stalking, piggy back computer usage, ID Theft, Account takeovers, and theft problems on everything including all brands of email accounts. I keep changing the ID and the passwords intermittently, but attacks continue. Erasing or replacing the HD does not remedy the situation either.
    As of now, the computer has practically empty; 979.87 GB free out of 1TB. It may have a couple of notes, pdf's, and some bookmarks. It was recently erased and is running on the OS X 10.7.5 to avoid Apple App Store updates to Mavericks, Pages, Keynote, etc. The security was set on everything I could think of to use the internet safely. 
    Besides surfing the web, I only did a few things. Because Chrome is better recommended, I used Safari to download Firefox, then used Firefox to download Chrome. Safari won't download it directly. I checked Yahoo mail. I used the Apple ID to post a question in the Apple Communities (within 24-48 hours of today). I changed the password to Apple ID in case there was an issue later. (I have to change the password almost 100% of the time because it gets stolen often) I usually erase Firefox because I don't use it. This time I left it there while I worked on other things & erased it later.
    After reading some online material, the system started to run slow as though there was too much data or space being taken up. Then I felt that someone or someone was using it at the same time. I disconnected the Ethernet and left an idle screen (it will sleep after a few minutes) because no sharing options remained. All fields are depopulated. All internet connection options were turned off and removed. Only the Ethernet remains. Unfortunately, that Bluetooth button can still be turned "on" and/or "discoverable". I don't know it this will still work with Bluetooth turned off  and removed in Sharing. Please clarify that for me.
    When I returned, the screen saver was changed. I expected to use a password to get back onto the computer, but no password was needed. I checked the settings and found the password for logging onto an idle & sleeping screen was removed. No one physically changed things around. This was done remotely or through malware.
    I checked various system preferences, and found the locks to Sharing was open with some of the components set up for usage (public files, bluetooth, remote apple events, etc.). I tried to change some options, but some items did not move. I tried to lock it but it would not lock. I tried other sys pref screens and found that some of them had been dismantled too.
    I tried to open the lock for other changes, but the password to System Preferences was changed.
    Is it normal to get a password popup window to LOCK users & groups when it is OPEN? I don't believe you need a password to lock it. Eventually, open locks closed with no chance to immediately reopen it to adjust the preferences (all passwords were changed).
    The terminal looks like it was used. No history was found. Reseting Password rejected new passwords. iTunes sharing could not be changed and parental control refused to lock. After waiting an hour or two, was able to lock it. I wonder what it was being used for.
    Now that the internet and the network are disconnected (before sending this message), everything is still extremely slow. A single window takes a long time to open. I have no idea what is making it drag and I don't know where to look.
    If history is repeating itself, then the computer is set for piracy just like before. Every place I go is watched, all passwords are captured, all files are checked, all email accounts can be stolen, chat and messages are used (email & computer), iTunes will be logged into, other types of accounts are stolen/taken over, and everything I type is read. Any changes will be sabotaged.
    I am confident that someone in the Apple Community will have the answers to getting rid of this problem for good. If you don't have all the answers, then perhaps you have good resources and referrals (not speculations or guesses).
    I read about apps, software, or devices that either detect or deter this type of problem. What are they and how do they work?
    Q- Also, exactly what are the steps to transfer the OS X 10.7.5, Mavericks, and the future Yosemite to a flash drive or disk to avoid future contact with the Apple App Store or using the Apple ID? (external HD's have been sabotaged in the past-via remote or erasing program of some sort)
    Q- How to permanently get rid of Messages & Chats
    Q- How to permanently remove Dropbox & Public file sharing?
    Q- How to permanently remove all sharing options?
    Q- Are there other ways to share (codes, commands, etc.) that need be to blocked/fixed/patched? If so, then what are they?
    Q- Are computers stalked by IP address? by Network? by computer numbers or codes? or just by traps or their accounts?
    Q- Is there a handy, "go to" type of checklist of where to look or what to do when there is a a suspicion of implants in the computer?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • How to avoid photoshop from changing colours of photos automatically?

    Photoshop automatically change the colour of my photos when dragged and dropped for contouring. How to avoid this?

    PS doesn't change any colors. You need to read up on color management and calibrate your system.
    Mylenium

  • How to avoid white color in photo taking in iphone 4s at night with flash?

    how to avoid white color in photo taking in iphone 4s at night with flash?

    HI Lisa91,
    Here is a link to a post about the same problem you are having and the same printer. You may find the posts helpful as some were able to find a solution. Post number 6 and number 12 specifically have found solutions that worked for them. Hope this helps some.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • Photosmart 8750 - how to avoid white edges on print? And how to match colors from monitor to print?

    Hi all! I´m new here so I hope I ask this in the right forum. Please advice me if this should be in another sub-forum..
    First: The white edges around my photos when printed:
    I can´t figure out how to avoid the white edges when I print my photos.
    If I print in A3 size (or any other size) there´s always the white edges around my photos on the print, and it´s really annoying.
    I make the size in Photoshop (CS4 extended) so that the photo matches the size of the printing paper, but still it gets adjusted when printing so I get the white edges.
    I either print directly from PS or from Windows Photoviewer. (I have Windows 7).
    In PS in the printing dialog box it says Scale to fit media, when I tick this and also have the Show Paper White ticked, it appears that the photo goes exactly as the size is set, but then I can see a thin white edge on top of it, illustrating that the photo will be printed with a white edge on top. If I untick the Scale to fit media, the photo appears to be cut a great deal before printed, so this will destroy my image.
    I usually print from Windows Photoviewer as the colours in PS turns out more different than when saved and printed from Windows. (My next question).  In Windows Photoviewer I only have the option Fit to frame, but in the preview it doesn´t look like any of those two options will give a borderless print.
    In the printers dialoge box for the Paper/Quality I only use the option for A3 HP glossy photopaper, but I see there are other options such as Photo without edges A3, but then the size says 423x303mm which is slightly bigger than the size of the photo.
    Also there´s a box to tick under it, Print without edges and under it Automatic fit without edges.
    Is it something here I should tick or untick?
    What options should I use to get it to print and fill the whole paper?
    Second: How to get the same colours on my print as it shows on my monitor?
    I have tried figuring out this, but I gave up. Though I know there´s something about the Profile´s, just not how to set them..
    As already said, the colours looks quite different when printed directly from PS than saved as .jpg and printed from Windows Photoviewer. In colours the print is closer to the actual colours when printed from Windows than from PS, but BW photos is quite far from as seen on the monitor when printed, from both of them.
    Instead of this nice warm "brownish" hue seen on my monitor, it´s printed with a greenish hue. Really annoying as I spend a lot of time working on my photos to get them as I like.
    In the printer´s dialog box (in Windows) I have disabled the ICM colour management.
    In PS dialog box I´m sure there´s something to do different under the Color Management, but I don´t know what.
    Also there´s probably something different in my monitor´s profile that differs from the printer and PS?
    Anyone who can help with either one or both of my problems??
    That would be highly appreciated so thanks so much in advance!

    HI Lisa91,
    Here is a link to a post about the same problem you are having and the same printer. You may find the posts helpful as some were able to find a solution. Post number 6 and number 12 specifically have found solutions that worked for them. Hope this helps some.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • How to avoid db file parallel read for nestloop?

    After upgraded to 11gr2, one job took more than twice as long as before on 10g and 11gr1 with compatibility being 10.2.0.
    Same hardware. (See AWR summary below). My analysis points to that Nestloop is doing index range scan for the inner table's index segment,
    and then use db file parallel read to read data from the table segment, and for reasons that I don't know, the parallel read is very slow.
    AVG wait is more than 300ms. How can I fluence optimier to choose db file sequential read to fetch data block from inner table by tweaking
    parameters? Thanks. YD
    Begin Snap: 13126 04-Mar-10 04:00:44 60 3.9
    End Snap: 13127 04-Mar-10 05:00:01 60 2.8
    Elapsed: 59.27 (mins)
    DB Time: 916.63 (mins)
    Report Summary
    Cache Sizes
    Begin End
    Buffer Cache: 4,112M 4,112M Std Block Size: 8K
    Shared Pool Size: 336M 336M Log Buffer: 37,808K
    Load Profile
    Per Second Per Transaction Per Exec Per Call
    DB Time(s): 15.5 13.1 0.01 0.01
    DB CPU(s): 3.8 3.2 0.00 0.00
    Redo size: 153,976.4 130,664.3
    Logical reads: 17,019.5 14,442.7
    Block changes: 848.6 720.1
    Physical reads: 4,149.0 3,520.9
    Physical writes: 16.0 13.6
    User calls: 1,544.7 1,310.9
    Parses: 386.2 327.7
    Hard parses: 0.1 0.1
    W/A MB processed: 1.8 1.5
    Logons: 0.0 0.0
    Executes: 1,110.9 942.7
    Rollbacks: 0.2 0.2
    Transactions: 1.2
    Instance Efficiency Percentages (Target 100%)
    Buffer Nowait %: 99.99 Redo NoWait %: 100.00
    Buffer Hit %: 75.62 In-memory Sort %: 100.00
    Library Hit %: 99.99 Soft Parse %: 99.96
    Execute to Parse %: 65.24 Latch Hit %: 99.95
    Parse CPU to Parse Elapsd %: 91.15 % Non-Parse CPU: 99.10
    Shared Pool Statistics
    Begin End
    Memory Usage %: 75.23 74.94
    % SQL with executions>1: 67.02 67.85
    % Memory for SQL w/exec>1: 71.13 72.64
    Top 5 Timed Foreground Events
    Event Waits Time(s) Avg wait (ms) % DB time Wait Class
    db file parallel read 106,008 34,368 324 62.49 User I/O
    DB CPU 13,558 24.65
    db file sequential read 1,474,891 9,468 6 17.21 User I/O
    log file sync 3,751 22 6 0.04 Commit
    SQL*Net message to client 4,170,572 18 0 0.03 Network

    Its not possible to say anything just by looking at the events.You must understand that statspacks and AWR actualy aggergate the data and than show the results.There may be a very well possibility that some other areas also need to be looked at rather than just focussin on one event.
    You have not mentioned any kind of other info about the wait event like their timings and all that.PLease provide that too.
    And if I understood your question corretly,you said,
    How to avoid these wait events?
    What may be the cause?
    I am afraid that its not possible to discuss each of these wait event here in complete details and also not about what to do when you see them.Please read teh Performance Tuning book which narrates these wait events and corresponding actions.
    Please read and follow this link,
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/instance_tune.htm#i18202
    Aman....

  • My macbook keeps asking me to use an administrator and their password to continue but nobody seems to know who is the administrator for this computer...does anyone know how to avoid this this or figure out who the administrator is?

    My macbook keeps asking me to use an administrator and their password to continue but nobody seems to know who is the administrator for this computer...does anyone know how to avoid this this or figure out who the administrator is?

    Lynne130,
    to figure out which users have administrative privileges, open the Users & Groups pane of System Preferences; each user other than the Guest User will be shown with a description of either “Admin” or “Standard”. It’s typical for the first user created on a Mac to be an administrative user.

  • How to avoid duplicate posting of noted items for advance payment requests?

    How to avoid duplicate posting of noted items for advace payments request?

    Puttasiddappa,
    In the PS module, we allow the deletion of a component pruchase requisition allthough a purchase order exists. The system will send message CN707 "<i>A purchase order already exists for purchase requisition &</i>" as an Iinformation message by design to allow flexible project management.
    If you, however, desire the message CN707 to be of type E you have to
    modify the standard coding. Doing so, using SE91, you can invoke the
    where-used-list of message 707 in message class CN, and to change the
      i707(cn)
    to
      e707(cn)
    where desired.
    Also, user exit CNEX0039 provides the possibility to reject the
    deletion of a component according to customers needs e. g. you may
    check here whether a purchase order exists and reject the deletion.
    Hope this helps!
    Best regards
    Martina Modolell

  • How to avoid special stock indicator for intercompany sales transitions.

    Hi Friends
    I have an issue Intercompany sales .if I  enter intercompany plant(Delivering plant) in the sales order system is taking special stock indicator and looking for sales order stock.
    If I enter company code plant for sales from unrestricted stock, system is not taking special stock indicator.
    Please advice how to avoid special stock indicator for intercompany sales transitions.
    Thanks in advance.
    SRK

    Ravi,
    Special stock is generally determined by the MRP strategy group in the material master of the plant against which you place your order.  The strateg(ies) contained in the strategy group will determine the SO requirements type, which will in turn determine whether or not the order is 'account assigned' (special stock).  
    It is normal to only have one strategy contained in a strategy group.  However (and I seldom recommend this) SAP will support multiple strategies within one strategy group.  In this case, you could have both MTS and MTO orders against the same plant/material, by manually altering the requirements type in the sales order.  This scenario is usually difficult for a planner, and involves additional manual attention to make everything work.
    I suggest that your first avenue is to change the Strategy group in the material master of the delivering plant to one that supports MTS.  This has a big impact in Controlling and in Production Planning, so ensure that all affected functional groups are aware of what you are doing, and of the resulting changes that they will experience.  The transition from MTO to MTS must be carefully controlled.
    If you are not a PP expert, I suggest you consult with your local PP expert before embarking on this change.
    Best Regards,
    DB49

  • After adding MIME type in sharepoint server, file click opens a popup for file to open as readonly or edit, How to avoid this popup

    After adding MIME type in sharepoint server,
    File click opens a popup for file to open as readonly or edit, How to avoid this popup
    Popup Details:
    You are about to open --> File Details
    How would you like to open --> ReadOnly, Edit
    OS: Window 7
    Jagadish

    this is likely caused by the library requiring check-out/check-in. For a file to be editable, the file needs to be checked out.
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • How to avoid password prompt in shell script for zip password protection

    Hi
    I am trying to set password protection to my oracle database export backup. Once the backup completed, it should compress with a password protection. Thats the plan. Initialy we were using the gzip for the compression. Then realized that there is no password protection for the gzip. Started using zip option. I tried using
    zip -P <password> filename
    But it was throwing below error.
    -bash-3.2$ zip -P expreports REPORTS_2013FEB14.dmp
    zip warning: missing end signature--probably not a zip file (did you
    zip warning: remember to use binary mode when you transferred it?)
    zip warning: (if you are trying to read a damaged archive try -F)
    zip error: Zip file structure invalid (REPORTS_2013FEB14.dmp)
    Not quite sure why.
    Then I used zip -e REPORTS_2013FEB14.dmp.zip REPORTS_2013FEB14.dmp
    But this prompting for the password. As I am trying to put the command in the script. It will be tough if it prompts for the password.
    I would like to know how to avoid the password prompting by saving somewhere or how the code should be written. Tried using expect feature of shell script. Below was the code I tried. It didnt work.
    [oracle@SF40V6636 test]$ cat repexp.sh
    zip -e REPORTS_imp.log.zip REPORTS_imp.log
    expect "Enter password:"
    send "imprep"
    expect "Verify password:"
    send "imprep"
    So please help in avoiding this password prompt or let me know how to change the code.
    Thanks
    SHIYAS M

    How about using gpg and adding a secret key to the requirement of a password? No one should be able to decrypt your file, not by knowing only the password.
    1. Generate a public and private key pair:
    $ gpg --gen-key
    When it shows "We need to generate a lot of random bytes…" open another terminal session and type "dd if=/dev/sda of=/dev/null" to create traffic. When the public and secret key created and signed you can Ctrl-C the dd command.
    To see what you have created:
    $ gpg --list-keys
    2. Encrypt and gzip your stuff:
    $ tar zcf stuff.tgz file_or_folder
    $ gpg recipient "Some Name" encrypt stuff.tgz
    $ rm -f stuff.tgz
    3. Decrypt and extract the archive:
    $ gpg batch yes --passphrase "password" -d stuff.tgz.gpg > stuff.tgz
    $ tar zxvf stuff.tgz
    Again, knowing the password alone will not let anybody decrypt your stuff.

  • How do I get HP to comp me for cyan color cartridge that quit working? CP1215

    Two months ago I purchased a new cyan ink cartridge. The printer had been working fine until a couple of days ago. I got this error message: catridge memory error on cyan.
    It says for me to replace the cartridge. This is for HP Color LaserJet CP1215. Shouldn't HP at least comp me because the cartridge stopped working long before it should have. 

    Hi @pgas ,
    I have sent you a private message. If you are not sure how to check your private messages then this post has instructions that will guide you through the process.
    Thanks for visiting the HP Support Forum
    I work for HP. However I speak only for myself, not for HP nor anyone else

  • How to avoid Build Array function inside a For (while) Loop?

    Hi there,
    I have a simple question about how to avoid using Build Array function inside the loop. Now I want to remove the Build Array funtion inside the loop to improve the performance (To get better memory management). Any idea how to do that?
    Thanks a lot!
    Warmest regards,
    Chong

    It's been my experience that using the auto-indexing to build an array
    on a For loop is just as good as initializing and replacing elements.
    The For loop knows before it runs how many iterations it has to run and
    can allocate the array ahead of time.
    You're better off initializing and replacing when using a While loop
    because it does not know how many iterations it will run and can't
    pre-allocate the array ahead of time.
    Ed
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

  • How To avoid column heading for only total line in ALV list Display

    Hi,
    How To avoid column heading for only total line in ALV list Display.

    Hi,
    to change colunm header field catlog is built
    look at the example below
    Changing column text headers
    use this to change, hide, or alter the ALV columns
    CLEAR: gt_fcat.
    READ TABLE gt_fcat WITH KEY fieldname = 'TEXT1' " ***
    *TEXT1 is your field name
       ASSIGNING <gtfcat>.
    IF sy-subrc = 0.
       <gtfcat>-coltext   = 'Date Type'.
       <gtfcat>-no_out    = ' '.
       <gtfcat>-tooltip   = 'Date Type Text from IT0019'.
       <gtfcat>-seltext   = 'IT0019'.
    keep seltext to '' if u want to hide
    ENDIF.
    regards
    austin

Maybe you are looking for