Preformance in mapping

can you give me the order for graphical,java,abap and xslt mappings in preformance point of view?

There are some unfortunate things about XI compared to other ESB EAI framework.
XI just use JAVA, J2EE and Web service technology for design and configuration phase. In run time ABAP engine is the main player which use J2EE engine as RFC destination to handle supporting work.
However other ESB EAI Engine such as Aqualogic, Websphere, Mule, TIBCO etc depend on JAVA as a core engine.
Regarding the view of a programmer who do not have a clue on the powe of JAVA and XSLT and at the same time have to depend on the burdon of some architectural flops in XI , it is nice to say that for the sake of goodness use ABAP mapping as much as possible for complicated mapping.
However provided that XI will one day use JAVA as a core engine and use JAVA technology as a main stream then XSLT and JAVA mapping can rock with even a 2 CPU production machine.
For example, I have a SAP Integration with 45 different plant system for a Telecom supply chain in USA where 2 instance of weblogic server with J2EE and JAVA can handle 35,000 master data changes (IDOCS) from SAP to all plants in 4 hours without breaking a single one. It took more than 3 days to load into the same SAP master data system using ABAP technologies and may be 60 CPU machines too.
If you know what is the power of XSLT, JAVA caching, power of JAVA POJOS, HEAP tuning and provided you have a right infrastructure supported by ESB EAI features such as transformation, translation, routing, then JAVA is the solution.
But if you are from a back ground of customization project, not much clue of software programming and dragged to certain believe then JAVA is not a solution.
I hope to see one day SAP platform use JAVA and J2EE technologies with its full power and keep the right steps SAP took with Netweaver platform.
Thanks

Similar Messages

CRM 5.0 & IS-U EHP4 Replication Problem

Hi all,
in the context of an upgrade of our IS-U (ECC 6.0) to EhP4 we experience an issue during the replication of contracts (Object SI_CONTRACT) from IS-U into CRM (CRM 5.0). As we didn't find any trace of a similar issue somewhere (Google, SAP Notes) I'll breifly describe the issues as well as our solution blow.
After the upgrade the contract BDocs sent from IS-U to CRM (e.g. after performing a move out for a BP) would appear to be processed successfully (green icon in SMW01). However when analysing the BDocs in detail we noticed that they contained no data. Strangely enough, request load for contracts from CRM still worked seamlessly. After some debugging we identified that the issue was that the BDocs (more precisely the BAPIMTCS structure) sent from IS-U contained structure names that where not expected from the mapping module in CRM. The underlying reason was that in table TBE31 the entry for the event IBSSICON had been changed from EECRM_CONTRACT_COLLECT_DATA to ECRM_CONTRACT_COLLECT_DATA.
This table is read in the function module EECRM_DELTA_DOWNLOAD_IBSSICONT. The entry for the event IBSSICON determines which function modules are used to collect the contract data in IS-U and also which function modules are used to preform the mapping to the BAPIMTCS structures.
Changing the entry back to the initial contents solved our problem. After the change the BDocs where filled and processed correctly. This fix seems to be necessary for all CRM version < 5.2.
Christian
Edited by: Christian Drumm on Sep 29, 2010 9:00 AM
Included information on CRM 5.2

Hi Gobi,
Thank you for advice. But:
I've created fields not by using AET - I used documentation that Nicolas suggested me above.
I've enhanced tables and structures that were mentioned there with my z-fields for both sides (CRM and ERP).
Also I looked CRMC_BUT_CALL_FU for CRM Inbound BUAG_MAIN - corresponding standard FMs are marked for call.
Any ideas?
Thanks in advance.
BR,
Evgenia

Sample Custom SSO not working for external userid mapped in userprofile in 11.1.1.8

Hi,
WebCenter sites v: 11gR1 (11.1.1.8)
I am in the process of validating Custom SSO Behaviour. I am facing hurdles. I have mentioned below the steps I preformed.
1. Deployed customizable-sso-11.1.1.8.0 .jar in cas/WEB-INF/lib
2. Copied SampleLoginform.jsp file to cas/fatwire
3. Copied the customSampleSSObeans.xml configuration file into cas/WEB-INF/spring-configuration folder.
4. Modified the following bean
        <bean id="customUserConfiguration" class="com.fatwire.wem.sso.cas.sample.SampleConfiguration"
                p:casLoginUrl="http://xyz.com:7001/cas/login"
                p:resolverUrl="http://xyz.com:7001/cs/custom/customCsResolver.jsp"
                p:resolverCredential-ref="resolverCredential"
                p:traceFlag="false"
                p:sampleDomain="mydomain"
                p:sampleFormUrl="http://xyz.com:7001/cas/fatwire/SampleLoginForm.jsp"
                />
Note: p:resolverCredential - I found it new in this bean, as it is not referenced anywhere in the WCS documentation. This resolverCredentail is actually another bean configured in customResolverCredentail.xml under spring-configuration folder. Also, I am not sure if p:sampleDomain has to be modified to suit the environment. Currently I have retained the default value of "mydomain".
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p"
        xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd">
        <description>
                This defines the SitesCS username/password credentials needed for identity resolution
        </description>
        <bean id="resolverCredential" class="com.fatwire.security.common.SecurityCredential">
                <property name="username" value="fwadmin" />
                <property name="password" value="xceladmin" />
                </bean>
</beans>
The default value mentioned for property name username and password were "@username@" and "@password@" respectively. I changed them to fwadmin/xceladmin as in the file above.
5. In WCS Admin UI, I added a user atribute "samplesso" and assigned unique value for couple of users
6. Restarted CAS.
7. On accessin wcs url, I am now redirected to custom sample login page(SampleLoginform.jsp)
    Following are the form fields: username, password, domain, external userid
8. It works fine, if I submit wcs credentails for username,password and default domain (mydomain) and I am taken to the WCS Admin UI
9. But if I submit domain(mydomain) and mapped user(unique value in sep 5) against userid, I get an error page. Following is the error
org.springframework.webflow.engine.ActionExecutionException: Exception thrown executing [AnnotatedAction@5f82e73 targetAction = com.fatwire.wem.sso.cas.web.CustomLoginViewAction@68b18314, attributes = map[[empty]]] in state 'viewLoginForm' of flow 'login-webflow' -- action execution attributes were 'map[[empty]]'; nested exception is java.lang.SecurityException: java.lang.NullPointerException
What is the cause and fix for the problem. Am I supposed to perform any other step?
Is there anything specific to p:resolverUrl="http://xyz.com:7001/cs/custom/customCsResolver.jsp" ? I did not do any deployment corresponding to this, as there was no such step mentioned in documentation.
Thanks

I just recently implemnted this for my current client.
http://xyz.com:7001/cs/custom/customCsResolver.jsp
The context "cs" here is important. For my current client, we installed 11G with context "cm". So for us the the resolver URL is:
http://xyz.com:7001/cm/custom/customCsResolver.jsp and when we login into FatWire we use:
http://xyz.com:7001/cm/login.
If you look in your Sites application folder you should see <Sites App/Context>/custom/customcsResolver.jsp. In the Jsk it's located at:
C:\Oracle\WebCenter\Sites\11gR1\App_Server\apache-tomcat-6.0.32\webapps\cs\custom\customCsResolver.jsp
Regards,
Robert Jackson

How many import maps.

Hi there,
Does anyone know what is the maximum import maps that can be created and saved.
We would like to build about 5 000 predefined import maps, each map being a unique scenarios for the End-User to choose from when preforming an import.
I would like to know if the map table can hold that many maps?
Many thanks in advance.
CH

Hi Chris,
In the above post you mentioned about record and taxonomy attribute linking,please elaborate on this.
I would like to say the links between a record value and taxonomy attribute value depend on the way it is designed.
Once a taxonomy has been designed and say you have 5000 attributes in that.
Each class in that taxonomy will can be linked to the attributes defined for the taxonomy.
for example if I have a class Fan and have attributes like Weight,Height,RPM etc, then only RPM or relevant attributes are linked to that class.
It is important to understand that records are not linked to attributes but they hold the value of Class and they have relevant attributes value with them.So the link between record and attributes in established as classes are linked to attributes.
Thanks,
Ravi

Is there a glitch in maps on the new iOS 6?

I downloaded the new iOS 6 and "maps" does not seem to be working as advertised. It does not speak turn by turn directions, nor is it adjusting my route as I travel. It does not update the distance as I travel and if I veer off route, it noes not adjust to put me back on track. Basically, maps is doing nothing for me. Is there something I need to do to get this to work properly?

Sky,
Are you still having trouble with the Speech-to-Text (STT)?
Since SIRI came out on iOS devices, I mainly use it in lieu of that on my iMac. With the current OS X 10.8.4 and when ever the "new" STT rolled out, I was hopeful it would be a vast improvement over the previous version, but marginal at best.
A few years back, I worked for a Big Box retailer and got a pretty sweet deal on Dragon for Windows, and it worked well enough...especially if you have a paper to write, I found it useful to rattle off a rough draft; however, I still feel the price is a bit much for what it does.
I think Apple could blow STT out of the park for iMacs and MacBooks if they could integrate a SIRI like interface that could out preform most STT programs out there...
That being said, the integrated text-to-speech (TTS) is awesome! You can easily convert text documents into iTunes tracks or just highlight and with a tap on the keyboard have your text read aloud! One of my favorite built-in features that works really well!
Best Regards,
~
JSMNKCMO

Remote System and Remote Key Mapping at a glance

Hi,
I want to discuss the concept of Remote System and Remote Key Mapping.
Remote System is a logical system which is defined in MDM Console for a MDM Repository.
We can define key mapping enabled at each table level.
The key mapping is used to distinguish records at Data Manager after running the Data Import.
Now 1 record can have 1 remote system with two different keys but two different records cannot have same remote system with same remote key. So, Remote key is an unique identifier for record for any remote system for each individual records.
Now whenever we import data from a Remote System, the remote system and remote key are mapped for each individual records. Usually all records have different remote keys.
Now, when syndicating back the record with default remote key is updated in the remote system that is sent by xml file format.
If same record is updated two times from a same remote system, the remote key will be different and the record which is latest contains highest remote key.
Now, I have to look at Data Syndication and Remote key.
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back. But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
Regards
Kaushik Banerjee

You are right Kaushik,
I have not done Data Syndication but my concept tell if there is duplicate record with same remote system but different remote keys both will be syndicated back.
Yes, but if they are duplicate, they needs to be merged.
But if same record have two remote keys for same remote system then only the default remote key is syndicated back.
This is after merging. So whichever remote key has tick mark in key mapping option(default) , it will be syndicated back.
Pls refer to these links for better understanding.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/80eb6ea5-2a2f-2b10-f68e-bf735a45705f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/7051c376-f939-2b10-7da1-c4f8f9eecc8c%0c
Hope this helps,
+ An

Error while deleting a mapping

Hi all,
I am getting the following error while deleting a mapping. My client version is 10.2.0.4.36
API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
oracle.wh.util.Assert: API5072: Internal Error: Null message for exception. Please contact Oracle Support with the stack trace and details on how to reproduce it.
     at oracle.wh.util.Assert.owbAssert(Assert.java:51)
     at oracle.wh.ui.jcommon.OutputConfigure.showMsg(OutputConfigure.java:216)
     at oracle.wh.ui.common.CommonUtils.error(CommonUtils.java:370)
     at oracle.wh.ui.common.WhDeletion.doActualDel(WhDeletion.java:512)
     at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:203)
     at oracle.wh.ui.common.WhDeletion.deleteObject(WhDeletion.java:283)
     at oracle.wh.ui.jcommon.tree.WhTree.deleteItem(WhTree.java:346)
     at oracle.wh.ui.console.commands.DeleteCmd.performAction(DeleteCmd.java:50)
     at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:189)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:478)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Thanks in advance!
Sebastian

These type of Internal Errors are all too common in OWB and it's difficult to diagnose the exact problem.
I'd suggest closing the Design Centre, going back in and trying to delete it again, this will often resolve Internal errors.
There's also an article on Metalink Doc ID: 460411.1 about errors when deleting mappings but it's specific to an ACLContainer error, so may or may not be of use.
One of the suggestions is to connect as the Repository Owner rather than a User and try to delete the mapping.
Cheers
Si
Edited by: ScoobySi on Sep 10, 2009 11:44 AM

FileName in ABAP XSLT Mapping

Dear SDN,
In an integration scenario we are using sender File Adapter and a ABAP XSLT Mapping.
Is there any way to get the source FileName from such mapping. Im trying to use the adapter-specific message attributes, but it doesn't work, and I didn´t find an example, probably I and doing somthing wrong.
regards,
GP

Thank you for your help,
I just try to access the adapter-specific attibutes using:
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:variable name="filename" select="key:create('http://sap.com/xi/XI/System/File', 'Directory')" />
</xsl:stylesheet>
but the following error raised:
<SAP:Stack>Error while calling mapping program YXSLT_TEST (type Abap-XSLT, kernel error ID CX_XSLT_RUNTIME_ERROR) Call of unknown function</SAP:Stack>
have you had this situation?

Sample source code for fields mapping in expert routine

Hi All
Iam writing the expert routine from dso to cube for example I have two fields in dso FLD1,FLD2
same fields in infocube also ,can any body provide me sample abap code to map source fields to target fields in expert routine,your help will be heighly appreciatble,it's an argent.
regards
eliaz

Basic would be ;
RESULT_FIELDS -xxx = <SOURCE_FIELDS> -xxx
you have the source fields as source, and result fields for as the target. In between you can check some conditions as in other routines of transformation.
BEGIN OF tys_SC_1, shows your source fields ( in your case DSO chars and key figures)
BEGIN OF tys_TG_1, , shows your result fields ( in your case Cube characteristics)
Hope this helps
Derya

How can I distinguish different action mapping in one ActionClass file?

I would like to create a ActionClass which will handle 3 mapping which comes from /add, /show or /del.
My question is how can I change the code so that the ActionClass servlet can distinguish the request from different url mapping ? Can anyone give me some short hints? Thx.
struts-config.xml
<action-mappings>
<action name="MemberInfoForm" path="/add" scope="request" type="com.myapp.real.MemberAction">
<action name="MemberInfoForm" path="/show" scope="request" type="com.myapp.real.MemberAction">
<action name="MemberInfoForm" path="/del" scope="request" type="com.myapp.real.MemberAction">
</action-mappings>MemberAction.class
public class MemberAction extends org.apache.struts.action.Action {
    private final static String SUCCESS = "success";
    public ActionForward execute(ActionMapping mapping, ActionForm form,
            HttpServletRequest request, HttpServletResponse response)
            throws Exception {
        return mapping.findForward(SUCCESS);
...

http://struts.apache.org/1.2.x/api/org/apache/struts/actions/MappingDispatchAction.html
http://struts.apache.org/1.2.x/api/org/apache/struts/actions/DispatchAction.html
Thank you so much for all of your suggestion.
I read the document of MappingDispatchAction and its note say:
NOTE - Unlike DispatchAction, mapping characteristics may differ between the various handlers, so you can combine actions in the same class that, for example, differ in their use of forms or validation.........
I wonder in DispatchAction, we can also have various forms or validation as MappingDispatchAction does, just by using different name in the action tag, for example:
<action input="/p1.jsp" name="MForm1" path="/member" scope="session" parameter="action" type="com.myapp.real.MemberAction">
<action input="/p2.jsp" name="MForm2" path="/member" scope="session" parameter="action" type="com.myapp.real.MemberAction">
<action input="/p3.jsp" name="MForm3" path="/member" scope="session" parameter="action" type="com.myapp.real.MemberAction">Hence, it is not the difference as stated from the NOTE, right?
Edited by: roamer on Jan 22, 2008 10:32 AM

How can I save to the same map every time when printing pdfs?

How can I save to the same map every time when printing pdfs?
Finder points to the document map even when I chose a different map recently.
I often print series of pdfs from the print dialog box, I'd like to choose the map to save to and then have all subsequent pdf prints automatically directed to the same map until I decide otherwise.

that link seems to be broken right now:
403 Error - Forbidden - No cred, dude.

Sensor Mapping Express VI's performance degrades over time

I was attempting to do a 3d visualization of some sensor data. I made a model and managed to use it with the 3d Picture Tool Sensor Mapping Express VI. Initially, it appeared to work flawlessly and I began to augment the scene with further objects to enhance the user experience. Unfortunately, I believe I am doing something wrong at this stage. When I add the sensor map object to the other objects, something like a memory leak occurs. I begin to encounter performance degradation almost immediately.
I am not sure how I should add to best add in the Sensor Map Object reference to the scene as an object. Normally, I establish these child relationships first, before doing anything to the objects, beyond creating, moving, and anchoring them. Since the Sensor Map output reference is only available AFTER the express vi run. My compromise solution, presently, is to have a case statement of controlled by the"First Call" constant. So far, performace seems to be much better.
Does anyone have a better solution? Am I even handling these objects the way the community does it?
EDIT: Included the vi and the stl files.
Message Edited by Sean-user on 10-28-2009 04:12 PM
Message Edited by Sean-user on 10-28-2009 04:12 PM
Message Edited by Sean-user on 10-28-2009 04:16 PM
Solved!
Go to Solution.
Attachments:
test for forum.vi ‏105 KB
chamber.zip ‏97 KB

I agree with Hunter, your current solution is simple and effective, and I can't really visualize a much better way to accomplish the same task.
Just as a side-note, the easiest and simplest way to force execution order is to use the error terminals on the functions and VIs in your block diagram. Here'a VI snippet with an example of that based on the VI you posted. (If you paste the image into your block diagram, you can make edits to the code)
Since you expressed some interest in documentation related to 3D picture controls, I did some searching and found a few articles you might be interested in. There's nothing terribly complex, but these should be a good starting point. The first link is a URL to the search thread, so you can get an idea of where/what I'm searching.You'll get more hits if you search from ni.com rather than ni.com/support.
http://search.ni.com/nisearch/app/main/p/q/3d%20picture/
Creating a 3D Scene with the 3D Picture Control
Configuring a 3D Scene Window
Using the 3D Picture Control 'Create Height Field VI' to convert a 2D image into a 3D textured heigh...
Using Lighting and Fog Effects in 3d Picture Control
3D Picture Control - Create a Moving Texture Using a Series of Images
Changing Set Rotation and Background of 3D Picture Control
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support

Numbers/Address Book and Google Maps

I would love to integrate my spreadsheet of addresses or my Address Book with Google Maps.
Is this possible? Somehow?
I take a lot of trips across the country and don't always know when I will be driving by my friends. But if I had a map I could glance at to see where they all are, I would know that I could schedule a lunch with a friend halfway or something like that.
I have heard about MapPoint, but don't know if there is anything like this that is free/affordable/non-MS.
Thanks!

Integrating in Numbers would not be automatic. You'd have to format links to assign to each address.
I've seen plug-ins to use Google maps with Address Book. Try a search on MacUpdate or VersionTracker for Address Book.
I think one of the features for Address Book in Leopard is integration with Google maps.

Mapping/invoking key codes in a GameCanvas's main game loop.

I'm trying to bind some diagonal sprite movement methods to the keypad. I already know that I have to map out the diagonals to key codes since key states only look out for key presses in the upper half of the phone (d-pad, soft buttons, etc...). Problem is, how do I invoke them in the main game loop since a key state can be encapsulated in a method and piped through the loop? What makes this even worst is a bug that my phone maker's game API (Siemens Game API for MIDP 1.0, which is their own implementation of the MIDP 2.0 Game API) has, in which if I override the keyPressed, keyReleased, or keyRepeated methods, it will always set my key states to zero, thus I can't move the sprite at all. Also, it seems that my phone's emulator automatically maps key states to 2, 4, 6, and 8, so my only concern is how do I map the diagonal methods into 1, 3, 7, and 9, as well as invoking them in the main game loop? Enclosed is the example code that I've been working on as well as the link to a thread in the Siemens (now Benq Mobile) developer's forum about the bug's discovery:
http://agathonisi.erlm.siemens.de:8080/jive3/thread.jspa?forumID=6&threadID=15784&messageID=57992#57992
the code:
import com.siemens.mp.color_game.*;
import javax.microedition.lcdui.*;
public class ExampleGameCanvas extends GameCanvas implements Runnable {
private boolean isPlay; // Game Loop runs when isPlay is true
private long delay; // To give thread consistency
private int currentX, currentY; // To hold current position of the 'X'
private int width; // To hold screen width
private int height; // To hold screen height
// Sprites to be used
private GreenThing playerSprite;
private Sprite backgroundSprite;
// Layer Manager
private LayerManager layerManager;
// Constructor and initialization
public ExampleGameCanvas() throws Exception {
super(true);
width = getWidth();
height = getHeight();
currentX = width / 2;
currentY = height / 2;
delay = 20;
// Load Images to Sprites
Image playerImage = Image.createImage("/transparent.PNG");
playerSprite = new GreenThing (playerImage,32,32,width,height);
playerSprite.startPosition();
Image backgroundImage = Image.createImage("/background2.PNG");
backgroundSprite = new Sprite(backgroundImage);
layerManager = new LayerManager();
layerManager.append(playerSprite);
layerManager.append(backgroundSprite);
// Automatically start thread for game loop
public void start() {
isPlay = true;
Thread t = new Thread(this);
t.start();
public void stop() { isPlay = false; }
// Main Game Loop
public void run() {
Graphics g = getGraphics();
while (isPlay == true) {
input();
drawScreen(g);
try { Thread.sleep(delay); }
catch (InterruptedException ie) {}
//diagonalInput(diagonalGameAction);
// Method to Handle User Inputs
private void input() {
int keyStates = getKeyStates();
//playerSprite.setFrame(0);
// Left
if ((keyStates & LEFT_PRESSED) != 0) {
playerSprite.moveLeft();
// Right
if ((keyStates & RIGHT_PRESSED) !=0 ) {
playerSprite.moveRight();
// Up
if ((keyStates & UP_PRESSED) != 0) {
playerSprite.moveUp();
// Down
if ((keyStates & DOWN_PRESSED) !=0) {
playerSprite.moveDown();
/*private void diagonalInput(int gameAction){
//Up-left
if (gameAction==KEY_NUM1){
playerSprite.moveUpLeft();
//Up-Right
if (gameAction==KEY_NUM3){
playerSprite.moveUpRight();
//Down-Left
if (gameAction==KEY_NUM7){
playerSprite.moveDownLeft();
//Down-Right
if (gameAction==KEY_NUM9){
playerSprite.moveDownRight();
/*protected void keyPressed(int keyCode){
int diagonalGameAction = getGameAction(keyCode);
switch (diagonalGameAction)
case GameCanvas.KEY_NUM1:
if ((diagonalGameAction & KEY_NUM1) !=0)
playerSprite.moveUpLeft();
break;
case GameCanvas.KEY_NUM3:
if ((diagonalGameAction & KEY_NUM3) !=0)
playerSprite.moveUpRight();
break;
case GameCanvas.KEY_NUM7:
if ((diagonalGameAction & KEY_NUM7) !=0)
playerSprite.moveDownLeft();
break;
case GameCanvas.KEY_NUM9:
if ((diagonalGameAction & KEY_NUM9) !=0)
playerSprite.moveDownRight();
break;
repaint();
// Method to Display Graphics
private void drawScreen(Graphics g) {
//g.setColor(0x00C000);
g.setColor(0xffffff);
g.fillRect(0, 0, getWidth(), getHeight());
g.setColor(0x0000ff);
// updating player sprite position
//playerSprite.setPosition(currentX,currentY);
// display all layers
//layerManager.paint(g,0,0);
layerManager.setViewWindow(0,0,101,80);
layerManager.paint(g,0,0);
flushGraphics();
}EDIT: Also enclosed is a thread over in J2ME.org in which another user reports of the same flaw.
http://www.j2me.org/yabbse/index.php?board=12;action=display;threadid=5068

Okay...you lost me...I thought that's what I was doing?
If you mean try hitTestPoint ala this:
wally2.addEventListener(Event.ENTER_FRAME, letsSee);
function letsSee(event:Event)
          // create a for loop to test each array item hitting wally...
          for (var i:Number=0; i<iceiceArray.length; i++)
               // if you don't hit platform...
          if (wally2.hitTestPoint(iceiceArray[i].x, iceiceArray[i].y, false)) {
          wally2.y -= 5;}
                      return;
That's not working either.

Key mapping Generator Tool

Scenario
One customer has two systems: System A and System B in his landscape. System A serves as the central server for item master data management. He maintains the same set of item master data in System B as that of System B manually. Now, the customer wants to use B1i to keep the item master data in System B automatically up to date as that in System A.
Use this tools to create the keys in the Bizstore.
Please read carefully the documentation before proceeding.
Lot of success,
Felipe

Hi all,
When running the tool I get an exception.
I have created a csv with all the cardcodes in it that need to be pushed. I have uploaded the tool to B1i. I've supplied the parameters and when I click execute the thing throws an exception.
Input path:
D:\B1i\Tools\Mapping Tool\Extracted\B1i2005PL05 or PL06\Reference\Common_BP.csv
Bizflow to execute:
/com.sap.b1i.datasync.keymapping/bfd/KeyMappingGeneration.bfd
Parameters: SenderSysId=0010000100,SenderObjectTypeId=B1.2005_BP,SenderKeyName=CardCode,SenderKeySelectionPath=BOM/BO/BusinessPartners/row/CardCode,ReceiverSysId=0010000102
Exception:
HTTP Status 500 - com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414) caused by: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414) caused by: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414) caused by: com.sap.b1i.utilities.UtilException: UTE001 Nested exception: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414) caused by: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0x0(:main:, row:1, col:414)
What is wrong?
Kind regards,
Dwight

Preformance in mapping

Similar Messages

Maybe you are looking for