Preinstall check failed - Unable to install SAP HANA Client
Hi all,
Recently I had to format my system and after loading the Windows 8 I downloaded the SAP HANA Client, SAP HANA Studio and SAP HANA JDBC Drivers for re-distribution from https://hanadeveditionsapicl.hana.ondemand.com/hanadevedition/ into the default folder which is C:Programfiles:SAP HANA Client and Studio
I installed the client and then the studio and then clicked on the executable ngdbc.jar file and clicked on ok.
Then I went to SAP HANA 70 client win32 folder and clicked on the hdbsetup to load client. I am getting the following error:
Preinstall check failed
SDB::Install::System::getMountPointWin: Malformed file path normalization: "ngdbc.jar"
Can any one please explain what this error is and how do I fix this error. I searched in the forum but could not find anything related to this error.
Thank you.
Regards
Pavan.
I am posting the results of my issues here, to be sure this is documented.
Close all applications
Uninstall SAP/b1 and all related components
Delete folder X:\Program Files\sap
Delete folder X:\Program Files (x86)\sap
Open REGEDIT and clean out all parent keys where "HANA" appears
Install the SAP/b1 client first!
Run the HANA Client installation "...as Administrator"
When the installation runs, it should default to "Install new"
Make sure you set/select the folder path properly to show X:\Program Files\sap\hdbclient
Once the clean-up was finished and the install was restarted, it installed without any issues.
Thanks,
~ terry o.
NOTE: Updated path 03/09/2015
Similar Messages
-
Issues in installing SAP HANA cloud platform tools
Hello Experts,
I am new to AiE/HANA tools.
I am trying to install SAP HANA cloud platform tools, but adding the URL Eclipse Kepler (4.3), URL: https://tools.hana.ondemand.com/kepler in the Eclipse menu.
However, I get the 'This repository is currently not available' message.
Am I doing something wrong here?
Any tips appreciated.
Best Regards
DevPlease check your proxy settings, the address is correct and the repository is there and waiting :-)
Sometime the eclipse need to be restarted when network settings are changed.
Enjoy,
Dobri -
Getting error while installing sap hana development plugin in eclipse luna
Hi Friends,
I am new to sap. I am trying to install sap Hana development plugin in my eclipse luna but getting error in the middle of installation, that I have
mentioned below. Can any one help me on this to get resolve. I am using eclipse luna(32 bit) and my system based 32bit.Hi Jayanchanthres,
Major problem is related to proxy as discussed above.
Check my proxy setting as am also using the PC out of corporate proxy.
Check for the Luno version details check the tools site.
SAP Development Tools for Eclipse
Hope it helps
Regards,
Kannan -
Installing sap hana cloud platform tools
Hallo,
While installing sap hana cloud platform tools into eclipse. i am getting following error message, which state only some software can be installed. Can any
one help me.
thanks,
veera.Please check your proxy settings, the address is correct and the repository is there and waiting :-)
Sometime the eclipse need to be restarted when network settings are changed.
Enjoy,
Dobri -
How to install SAP B1 client in Ubuntu 11.04
Hi everyone!
I use Ubuntu 11.04 and my server is Windows 2003 and SQL Server 2008 to DB
I trying of install SAP B1 client in Ubuntu, to do a change of SO in the work machines. And need documentation to i can do it, because the installer that i have is for Windows SO.
Thanks for all help that can give me...Dear Sai,
Pease delete all temp, recent files from the system then restart the sytem
Then you install client with run as administrator..
Regrads
Ajith -
Unable to start sap hana. -Startup of Instance failed-
I can not start the sap hana, if you know better how to respond, please advise.
Error:
The following is the error log at startup.
Version:
SAP HANA SPS3 Rev.22
Background:
The phenomenon began to occur after failing to recover from. However, it might not matter.
/ Usr/sap/HN1/home/startsap_HDB00.log "contents.
Thursday, January 05 01:16:26 UTC Trace of system startup / check of SAP System HN1 on 2012
Called command: / usr/sap/HN1/SYS/exe/hdb/startsap HDB00
Starting SAP Instance HDB00
Instance Service on host TECTKOSV043 started
SAP-R/3-Startup Program Rel 802 V2.0 (2008/11/15)
Starting at 2012/01/05 01:16:26
Startup Profile: "/ usr/sap/HN1/SYS/profile/HN1_HDB00_tectkosv043.tecnos.jp"
Setup Environment Variables
(8972) SETENV PATH = / usr/sap/HN1/HDB00/exe: / usr/sap/HN1/HDB00/tectkosv043.tecnos.jp: / usr/sap/HN1/HDB00: / usr/sap/HN1/HDB00 / exe: / usr/sap/HN1/HDB00/exe/Python/bin: / usr / local / bin: / bin: / usr / bin: / usr/bin/X11: / usr/X11R6/bin: / usr / games : / usr / lib / mit / bin: / usr / lib / mit / sbin: / opt / dell / srvadmin / bin: / usr / sap / tools / bin: / bin: / usr / bin: / usr / ucb: / sbin
(8972) SETENV SAP_RETRIEVAL_PATH = / usr/sap/HN1/HDB00/tectkosv043.tecnos.jp
(8972) SETENV PYTHONPATH = / usr/sap/HN1/HDB00/tectkosv043.tecnos.jp: / usr/sap/HN1/HDB00/exe: / usr/sap/HN1/SYS/global/hdb/custom/python_support: / usr/sap/HN1/HDB00/exe/python_support
(8972) SETENV DIR_LIBRARY = / usr/sap/HN1/HDB00/exe
(8972) SETENV LD_LIBRARY_PATH = / usr/sap/HN1/HDB00/exe: / usr/sap/HN1/HDB00/exe: / usr/sap/HN1/HDB00/exe: / usr/sap/HN1/HDB00/exe / Python / lib: / usr/sap/HN1/HDB00/exe/filter: / usr/sap/HN1/HDB00/exe/AFL
(8972) SETENV SHLIB_PATH = / usr/sap/HN1/HDB00/exe:
(8972) SETENV LIBPATH = / usr/sap/HN1/HDB00/exe:
Execute Pre-Startup Commands
(8973) Local: rm-f / usr/sap/HN1/HDB00/tectkosv043.tecnos.jp/trace/py.sapHN1_HDB00
(8974) Local: ln-s-f / usr/sap/HN1/HDB00/exe/Python/bin/python / usr/sap/HN1/HDB00/tectkosv043.tecnos.jp/trace/py.sapHN1_HDB00
(8975) Local: rm-f / usr/sap/HN1/HDB00/tectkosv043.tecnos.jp/trace/HDB.sapHN1_HDB00
(8976) Local: ln-s-f / usr/sap/HN1/HDB00/exe/hdbdaemon / usr/sap/HN1/HDB00/tectkosv043.tecnos.jp/trace/HDB.sapHN1_HDB00
Starting Programs
05.01.2012 01:16:26
ShmDetach
OK
(8979) Starting: local / usr/sap/HN1/HDB00/tectkosv043.tecnos.jp/trace/HDB.sapHN1_HDB00-d-nw-f / usr/sap/HN1/HDB00/tectkosv043.tecnos.jp/daemon.ini pf = / usr/sap/HN1/SYS/profile/HN1_HDB00_tectkosv043.tecnos.jp
(8972) Waiting for Child Processes to terminate.
(8972) **** 2012/01/05 01:16:31 Child 8979 terminated with Status 0. ****
(8979) **** 2012/01/05 01:16:31 No RestartProgram command for program 2 ****
(8972) **** No more Child Processes to wait for.
(8972) Parent Shutdown at 2012/01/05 01:16:31
Execute Post-Shutdown Commands
05.01.2012 01:16:31
ShmDetach
OK
(8972) Exiting with Return-Code 3. (No more child processes)
Startup of Instance failedThis question is not related to the HANA developer center sandboxes - no user can stop/start these systems...
If the issue happened after a failed restore, your database is probably corrupted and cannot be started. Try to restore another backup. You can also try to restore the same backup again, and choose to not replay the log (recover from data files only). You will probably loose some changes, but at least have a consistent state...
--Juergen -
Unable to install SAP B1 on Windows server 2008 R2
Hi
I am unable to install the SAP Business one 2007 B PL00 on Windows server 2008 R2.
Environment is set as following :
1. SQL SERVER 2008 Installed on Server A
2. SAP B1 to be installed on Server B
3 Both servers are in domain
4.Firewall is off
5. ODBC Connection is tested Successfully
6 Port is also seem to be ok.
But after Installing server tool, when trying to install the Server , in server type nothing is displayed.
I also checked the connecting SQL server from the instance .
Please help is this is related to compatibility of Windows server 2008 R2 with 2007 B or so .
Thanks & Regards
RPWindows server 2008 R2 is not a supported OS for a lower 2007 version. You need to install a higher version.
Hi Gordon ,
It means I have to install SAP 2007 B PL10 afterwards upgrade it to the latest patch level .
But searching in the forms , i have seen some bopdy installed the SAP 2007 B PL15 on Windows server 2008 R2.
Thanks in advance
Regards
RP -
Online backup with redolog failed on newly installed SAP server
Dear All,
Pls check the below log which was taken newly installed SAP server .
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: beflcufp.and 2011-03-14 15.32.17
BR0484I BRBACKUP log file: D:\oracle\IBQ\sapbackup\beflcufp.and
BR0252W Function remove() failed for 'D:\oracle\IBQ\102\database\sap.ora' at location BrInitOraCreate-1
BR0253W errno 13: Permission denied
BR0252W Function remove() failed for 'D:\oracle\IBQ\102\database\sap.ora' at location BrInitOraCopy-7
BR0253W errno 13: Permission denied
BR0166I Parameter 'control_files' not found in file D:\oracle\IBQ\102\database\initIBQ.ora - default assumed
BR0274W File 'D:\oracle\IBQ\102\database\CTL1IBQ.ORA' not found
BR0280I BRBACKUP time stamp: 2011-03-14 15.32.20
BR0319I Control file copy created: D:\oracle\IBQ\sapbackup\CNTRLIBQ.DBF 12664832
BR0063I 17 of 17 files processed - 26652.203 MB of 26652.203 MB done
BR0204I Percentage done: 100.00%, estimated end time: 15:56
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2011-03-14 15.56.42
BR0340I Switching to next online redo log file for database instance IBQ ...
BR0321I Switch to next online redo log file for database instance IBQ successful
BR0117I ARCHIVE LOG LIST after backup for database instance IBQ
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination D:\oracle\IBQ\oraarch\IBQarch
Archive format ARC%S_%R.%T
Oldest online log sequence 308
Next log sequence to archive 311
Current log sequence 311 SCN: 2870470
Database block size 8192 Thread: 1
Current system change number 2870472 ResetId: 745348120
BR0017E Offline redo log file 'D:\oracle\IBQ\102\RDBMS\ARC00310_0745348120.001' not found
BR0056I End of database backup: beflcufp.and 2011-03-14 15.56.43
BR0280I BRBACKUP time stamp: 2011-03-14 15.56.43
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2011-03-14 15.56.43
BR0291I BRARCHIVE will be started with options '-U -jid ALLOG20110314153206 -d disk -c force -p initIBQ.sap -cds'
BR0280I BRBACKUP time stamp: 2011-03-14 15.56.44
BR0292I Execution of BRARCHIVE finished with return code 3
RegardsDear all,
Backup got failed pls check below logs (Note : Kernal also upgraded and ORACLE_SID
ORACLE_HOME also set .
BR0063I 17 of 17 files processed - 26652.203 of 26652.203 MB done
BR0204I Percentage done: 100.00%, estimated end time: 15:27
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.46
BR0340I Switching to next online redo log file for database instance IBQ ...
BR0321I Switch to next online redo log file for database instance IBQ successful
BR0117I ARCHIVE LOG LIST after backup for database instance IBQ
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination D:\oracle\IBQ\oraarch\IBQarch
Archive format ARC%S_%R.%T
Oldest online log sequence 312
Next log sequence to archive 315
Current log sequence 315 SCN: 2952702
Database block size 8192 Thread: 1
Current system change number 2952704 ResetId: 745348120
BR0018I Waiting for the next offline redo log file...
BR0202I Saving space_log
BR0203I to D:\oracle\IBQ\sapbackup\IBQ ...
BR0202I Saving D:\oracle\IBQ\sapbackup\beflmnyz.and
BR0203I to D:\oracle\IBQ\sapbackup\IBQ ...
BR0202I Saving D:\oracle\IBQ\sapbackup\backIBQ.log
BR0203I to D:\oracle\IBQ\sapbackup\IBQ ...
BR0056I End of database backup: beflmnyz.and 2011-03-16 15.27.54
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.55
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.55
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.55
BR0291I BRARCHIVE will be started with options '-U -jid ALLOG20110316151050 -c force -p initIBQ.sap -cds'
BR0280I BRBACKUP time stamp: 2011-03-16 15.27.57
BR0292I Execution of BRARCHIVE finished with return code 3
BRArchive is not done ,
Kindly advise. -
Unable to install SAP Passport certificate
I'm getting exactly the same problem that Nancy Ruff was in thread 439036, "Not able to install SAP Passport certificate". That is, every time I try to download the certificate I get to the error page asking to set the flag to allow ActiveX controls to run. A 'partial' certificate is installed, but it doesn't work properly and has to be removed each time.
I'm running IE6 SP2 and have checked all the settings indicated (as Nancy did) and they are all OK.
Unfortunately, her solution was to remove NTuser.DAT and log in again (to recreate it). I can't do this as it will lose all other registry settings, so I need to find out what the problem actually is.
Can anyone help?
Derek Dongray.Hi,
If you are unable to configure SAP passport certificate due to ActiveX issues, I recommend you download and install Internet Explorer ActiveX update. This works for Windows XP and Vista also (If you have IE 7 too). See the website below:
http://support.microsoft.com/kb/912945
Reward if the issue is resolved
Rgds,
Raghu -
Unable to install SAP webAS on Windows 2003
Hi Everyone , I am trying to install SAP WebAS Java 6.4. We use an Oracle Database and i want to deploy
our web apps on the SAP WebAS . I get this error during installation :
ERROR 2004-11-09 15:00:39
CJS-00081 Assertion failed: in
function sapdb_sql_query(db_nm, sql_s, db_node) {
var ret_s = "";
var sdbInst = new sdbInstance();
sdbInst.dbName = db_nm;
sdbInst.dbHost = (db_node == undefined) ? installer.getHostName() : db_node;
var r_arr = sdb_sql_query(sql_s, sdbInst);
ASSERT(arguments.callee, r_arr != undefined, "ERROR EXECUTING DBMCLI COMMAND!");
if (r_arr[0] == "false") {
var err_msg = "ERROR EXECUTING SQL QUERY: ";
for (var i_cnt = 1; i_cnt < r_arr.length; i_cnt++) {
err_msg = err_msg + r_arr[i_cnt];
ASSERT(arguments.callee, false, err_msg);
} else {
end_l = new RegExp("END");
for (i_cnt = 0; i_cnt < r_arr.length; i_cnt++) {
if (end_l.test(r_arr[i_cnt])) {
ret_s = r_arr[i_cnt + 1];
break;
return ret_s;
ERROR EXECUTING SQL QUERY: OKERR-24988,ERR_SQL: sql error-5015,Missing keyword:USERGROUP,TIMEOUT,STANDARD,RESOURCE,REPLICATION,NOT,LIKE,EXCLUSIVE,DBA,COSTWARNING,COSTLIMIT,CACHELIMIT
How do i get over this problem ?
Thanks
RaviHello Ravi,
this problem probably occurred when a SQL user was trying to be created using a password with special characters, but failed.
Could you please copy the last couple of lines of the protocol named 'XCMDOUT.log' into this thread?
Regards,
Roland -
Unable to install SAP Netweaver 2004s in Solaris x64
I am trying to install SAP Net2004s in solaris x64 and it has JDK1.6.
For some reason the SAPINST keeps giving error "JDK version 1.5.0 and above is not supported by SAP.
I downloaded and installed j2sdk1.4.2_24_b06 as per note 716604.
Created environment variable as
export JAVA_HOME=/opt/j2sdk1.4.2_24
export PATH=$PATH:$JAVA_HOME/bin
export SAPINST_JRE_HOME=opt/j2sdk1.4.2_24
now if i execute java -version, again it is showing as Jdk1.6
which java
/usr/bin/java
i am able to execute xclock.
I renamed the softlink in /usr/java to java.old and created new one as /usr/java pointed to /opt/j2sdk1.4.2_24
after this if i execute java -version, it gives an error "Error occurred during initialization of VM
java/lang/NoClassDefFoundError: java/lang/Object"
Now i checked the java executables, it is located in /opt/j2sdk1.4.2_24/bin/amd64/ (all java executables)
Now i set the env PATH /opt/j2sdk1.4.2_24/bin/amd64 before the variable /ur/bin/java
I tried creating env as "export PATH=$PATH:$JAVA_HOME/bin/amd64". But no luck.
I would really appreciate if someone could help me to pass through this error.
Thanks in advance.install a fresh JDK just need 64 bit version
and set the environment variables accordingly,
i did install java64bit and out put java -version is j2sdk1.4.2_24 64bit
created env
export JAVA_HOME=/opt/j2dsk1.4.2_24
export PATH=$JAVA_HOME/bin:$PATH
export SAPINST_JRE_HOME=/opt/j2dsk1.4.2_24
export DISPLAY=XXX:0.0
able to execute xclock
But got the same error when i try to execute ./sapinst
error "GUI not Connected......."
i wonder that in java 64 bit,the executables are located in /opt/j2sdk1.4.2_24/bin/amd64/(all java executables)
but when we execute ./sapinst, it shows as it is searching the executables in /opt/j2sdk1.4.2_24/bin
i don't know if that matters.
but just want to let you know that, i was able to get the sapinst gui, when pointing to java1.6 version, but unfortunatly sap won't support above java1.5.
path of java1.6 executables - /usr/jdk/jdk1.6../bin/(all java executables)
Please help me resolving this issue. -
SCCM 2012 Client Check Fail after CU4 install
I've had a problem with my SCCM clients failing the client check since CU4 was installed last week. The number of failed clients has gone up everyday since the install to the point where I'm now at 50% failure (943 machines) and growing.
The reason the console lists for Errors show as:
681 Client Prerequisites
446 WMI Event Sink
446 SMS Agent Host service status
175 Client WMI provider
This is coming from the most client check failures I've seen in my environment is 10. I can still send some packages to about 300 of the failed client check machines, but I get nothing on the rest.Hi,
Is there any error in the log files as Torsten mentioned?
Technical Reference for Log Files in Configuration Manager
http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_ClientOpLogs
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Unable to Install SAP BO 3.1 On windows 8
Hi Experts,
When I try to install SAP BO 3.1 on my PC,I am getting the below error.
I have windows 8 on my system
please view the screen shot and do the need full for me in this
Thanks in Advance.....Make sure to restore your Windows 8 Image on your laptop. You probably have other programs running which are conflicting with the installation.
Also make sure you have the right Microsoft Visual C++ loaded into your laptop.
When running the installation execute it with windows xp compatibility.
After you are doing so you should be all set.
Best Regards,
Anuar Holland. SAP BO Senior Consultant -
Unable to run SAP HANA Cloud Connector on windows 8.1
Hi Experts,
I am trying to run SAP HANA Cloud Connector on Windows 8.1 machine , i could see the go.bat command response as below:
But when i run https://localhost:8443 URL in a browser, i don't see any response. Just a blank screen.
By looking at the logs:
#ERROR#com.sap.scc.jni#Start Level Event Dispatcher# #Cannot load the Cloud Connector native library. (exception java.lang.UnsatisfiedLinkError: no sapscc20jni in java.library.path)
As per this reference https://help.hana.ondemand.com/help/frameset.htm?204aaad4270245f3baa0c57c8ab1dd60.htmlInstallation on Microsoft Windows OS it doesn't talk anything about support of HCC on Windows 8.1, just wondering if above error is because of it.
For more details, PFA log files.
Regards,
JKAs a workaround have tried copying sapscc20jni.dll file from auditor folder at sapcc-2.4.0-windows-x64 into Windows\System32 and it worked like a charm
Thanks Virinchy P
Regards,
JK -
Hi,
I am trying to install SAP GUI 710 on my system which has Windows Vista as the OS. I have downloaded 3 zip files from the SAP Market place. They are
50083078_2.zip
50083078_4.zip
50083078_5.zip.
None of these zip files contain the .exe file which will help me in installing the SAP GUI.
Let me know if there is any other link to download the GUI files.
I do have SAP GUI 470 on my system now.
Thank you in advance.
Shankar.Hi Dieter,
You are right that there are .exe files in that folder. But when I try to execute them, it says that the exe file NWSAPSETUP.exe is not present in its respective folder. And after that the execution stops.
I doubt that there is something else which i need to do, can you please forward me or let me know the steps involved in implimenting the SAP GUI 710.
Thank you in advance.
Regards,
Shankar.
Maybe you are looking for
-
I don't know if this is a bug or what but I find it quite annoying: Illustrator CS4 sometimes slightly (1 or 2 'millipixels') changes the size or location of my artwork without any reason. Examples: - I save using the .ai format. When I open that fil
-
How to view .flv files?
How view flv files in nokia 5233? Moderator's Note: We have moved your post and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.
-
How I can get my contacts , photo and app back
How can I get my contacts, photos and apps back?
-
Help reqd to config.Eclipse + Lombaz for debugging on Weblogic 8.1
By: c srini Help-Eclipse Lombaz config -debug on Weblogic [ reply ] 2005-07-12 21:31 Require help to configure my project in Eclipse with Lmbaz onto Weblogic 8.1. Following is a brief scenario of my problem: I have an existing web-based project that
-
How do I sync/copy the photo albums I created on my 4S to my Mac and then to my iPad?