PREL 2.0 - Fails to open project

I've used PREL 2.0 for many projects (30-40) and have not yet had this issue. I created a 1 hour project, burned a "Proof" DVD, closed the project after saving and now that project will not open. There were no errors prior to closing the project.
Now, I get the message, "Sorry, there has been a serious error, we will attempt to save your project."
I get the same message with all five of the auto-save files, I do not get this message with any other project, other recent projects open as usual.
This is a job for a client, I can't imagine doing the work again... it's due tomorrow, there's no time. My best option, unless there's a way to debug the original project file, is to simply duplicate my "proof disk" even though there were some minor tweaks I was planning to make before making final DVDs for the customer.
If there's no help, that's OK, but it sure would be nice to polish the last few things for my client. Any help is appreciated.
Thanks, Bryan

Well, the program launches just fine. It's opening that one project that causes the crash to occur.
I let the burn happen over night (since it takes forever to render and burn), perhaps the file was corrupted during that time. Then, the auto-saves would save the corrupted file information as it re-saves every 20 minutes even when I'm not working. Since the program was open all night it kept saving even though I wasn't working.
A virus may be a possibility, however, I created another project the same night and it is not corrupted.
I do have less than 30 gigs free currently, I always seem to be running low on space... unfortunately freeing up space won't undo the damage done, but it could help prevent future problems if that was the cause. Thanks for the suggestion.

Similar Messages

Error message" The file may be damaged or corrupted -1610153464/ also unable to open projects in the background 26:: 142

Hello everyone,
I hope someone can help me.
I am using AE CC/Windows 7 on a Dell computer, 32 GB RAM, 64 bit op system, processors: Intel (R) Xeon (R) CPU x5670 @ 2.93 Ghz 2.93 Ghz (2 processors).
So far I had worked on many projects with no problems and then a few weeks ago the project crashed non stop. The problem was overcome when I got rid of all MP3s and converted them to RAM. Again this was an issue I didn't have in the past and I don't recall changing anything.
Now it seems it is impossible for me to export/render out a project into a Quick time file or even AVI. If its quick time I get this message: After Effects unable to render error an output module failed. The file may be damaged or corrupted -1610153464 and if I am trying to export with AVI I get this message: AE unable to open projects in the background 26:: 142)
This is happening with different projects.
I read the forums and heard that the problem may be a Bug with quicktime and H.264? I never had a problem with it before but again when I try to export AVI I get this error message:
AE unable to open projects in the background
I have a feeling it is quick time related. I have uninstalled and reinstalled QT but still get the problem. It will open old QT files no problem. I tried to download a bug fix update as one post suggested but I think I have the latest which is why it didn't work.
This particular project has a couple of quick media H.264 files. Do I need to convert them? Are they the cause for all of this?
I am sorry I really tried to look for answers in the forums before contacting you here but I cannot find a reason for all this mess, which again only appeared a few weeks ago with no problems for months...if someone can point out an area where I can start looking, I would really appreciate it. Thanks in advance.

update: I converted all the H.264 footage which were in the project to WMV. And I was able to test export with AVI and it turne dout fine (like 10 seconds). However I still got the Error message: "After Effects unable to render error an output module failed, a filme may be corrupted or damaged. Error-1610153464 " when I tried to export H.264 QT..
I don't know what to do now, how can a problem which did not exist suddenly come up. How can I export a QT file? with AVI it will be massive!
Many thanks
Amanda

Failed to open the connection. Error in the Designer when copying ...

I have two different systems I am developing an application on.
I copy the entire directory from one system to the other. Both systems have the same environment:
Visual Studio 2010
Crystal Reports for Visual Studio 2010 (the production release, or I think it is the vesion is 13.0.2.0 is the version on the assemblies)
SQL 2008 R2
Today, I started adding Crystal reports to this VS solution. I have a reportdriver class that exports all the reports to an HTTP Stream, but we can sit that aside for now. The problem I am having is strictly with the integrated designer.
I have a bunch of existing reports written for an old Sybase databse. I have ported them to SQL and the table structure matches. I simply add the report to my project, point it to the new datasource (using "Set Datasource Location" - OLE ADO SQL) and then preview the report to be sure it runs.
I am just using "localhost" as my server name for the OLE connection so I...in theory... don't have to change the data source to view it on the other system. Both systems have SQL 2008 R2 installed locally. For my login credentials, I use SQL Security and use the same database login/password on both development machines andthe production server.
Today, I copied my entire project to the other PC (as I do almost every day).. When I open any of the reports (in VS) and try to preview them I get:
Failed to open the connection.
Details: ADO Error Code: 0x80004005
Source: Microsoft OLE DB Provide for SQL Server
Description: [DBNETLIB][ConnectionOpen (Connect().]SQL Server does not exist or access denied.
SQL State: 08001
Native Error: 17 [Database Vendor Code: 17]
I can only guess that I am using two different OLE ADO drivers on the two systems or there is something embedded in the rport or somewhere in my solution that "knows" I am not really on the same system that I initially set them up on and previewd them with.
Am I on the right track? Any idea how I can fix this? Obviously, I don't want to have to setup the datasource for every report in my application (if I do that, the report works) when I copy it from the development to the production server.
I am in a real bind here and under a fast aproaching deadline. Any help is much appreciated!!!
Shayne

Don't use localhost as your server name. It's a reserved name and should not be used in code.
Try this also [Kbase |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353333333433363339%7D.do] SAP Note 1553469 - How to enable Database logging in Crystal Reports for Visual Studio 2010
Edited by: Don Williams on Jan 30, 2011 6:02 AM

Unable to open project file - from one 6.0.2 to another 6.0.3.

Hi
We're at a time-critical stage of finishing our movie, and we need to get the color-corrected sequence from the post-house to our studio so we can make some picture changes and get it back to them. They can open the project file just fine (it was created in 6.0.2, but they since updated their system to 6.0.3), and we have just updated to 6.0.3 also. Quicktime is 7.4.5 (which matches their version). However, they've FTP'd it to us, and we cannot open it here. FCP gives the error "Unable to open project file". It's not the "older version" message which I've seen before, it just ... fails to open it. Almost as if the file were corrupt. However, the post house can re-download the file from FTP and open it there, so this confuses me. I've also tried the file on a FCP 6.0 system (which I can't update because it's an Avid system locked to a certain version of Quicktime) and the same error message.
Would anyone be willing to test the file and see if they can, at least, open it?
Many thanks.
Matt

Have them zip the file... Project files via email often don't open if they aren't zipped..
Jerry

Failed to open the connection. Details: [Database Vendor Code: 53 ]

I'm upgrading one of our applications from Visual Studio 2005 to 2010. In the process I'm also switching our reports to run using Stored Procedures instead of Tables/Views. Everything runs fine on development machines after all the migration work. On the server however, it does not work. And I am getting the error message ""
Server is Windows 2003 Server 32 bit. And yes, I have installed the latest runtimes version 13.0.2000.0 on the server. There have been no other changes on the server other than to switch the target framework on the website in question from .net 2 to .net 4, and then to modify the web.config file to remove references to the older Crystal Reports and replace with references to the newer version.
I've seen many other threads on this "failed to open the connection" errors but none of them are my problem except there is one post that remains unanswered where someone had the same Database Vendor Code 53. I don't know what that error means, spent a considerable amount of time researching that before asking this question.
Lastly, it appears that this error only happens when the report is pulling data from a Stored Procedure rather than Tables/Views. If I re-copy the previous reports, they still work.
The ODBC drivers haven't changed, nor should they. They are fully up to date on that server machine.
I can't think of anything else that would be indicative of anything other than this is a bug. Here is the error text as it shows up in the event log:
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 12/7/2011 3:49:50 PM
Event time (UTC): 12/7/2011 11:49:50 PM
Event ID: 38ce5b5487984e8aa8d2b84493d859a8
Event sequence: 17
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/739252194/Root-1-129677751941252500
    Trust level: Full
    Application Virtual Path: /
    Application Path: D:\Websites\ACE5\Clients\TST\
    Machine name: ACE1
Process information:
    Process ID: 5436
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: InternalException
    Exception message: Failed to open the connection.
Failed to open the connection.
Details: [Database Vendor Code: 53 ]
Failed to open the connection.
Details: [Database Vendor Code: 53 ]
Failed to open the connection.
PackSlipTST0 {638463B4-2196-492A-BD6E-9D82CB1862D5}.rpt
   at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportOptions options, HttpResponse response, Boolean asAttachment, String attachmentName)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToHttpResponse(ExportFormatType formatType, HttpResponse response, Boolean asAttachment, String attachmentName)
   at Distribution_PackingSlips_default.ExportPackingSlips(String CrystalReportPath, Boolean UseStoredProcedure)
   at Distribution_PackingSlips_default.Page_Load(Object sender, EventArgs e)
   at System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e)
   at System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e)
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Failed to open the connection.
Failed to open the connection.
Details: [Database Vendor Code: 53 ]
Failed to open the connection.
Details: [Database Vendor Code: 53 ]
Failed to open the connection.
PackSlipTST0 {638463B4-2196-492A-BD6E-9D82CB1862D5}.rpt
   at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)

Lots of great info here, except for the database; MS SQL? Oracle? Etc?
Database Vendor Code 53 is an error code that the CR engine simply passes straight from the database it's self. E.g.; look at your database error code and you should be able to find a verbose description of the error.
As a test, what happens if you add the report to your project and run it in the CR design part of the .NET IDE?
- A quick google search of Error 53 (for MS SQL - an assumption) comes up with a number of good hits. E.g.;
http://social.msdn.microsoft.com/Forums/en-AU/sqlgetstarted/thread/27684811-1a59-4273-b7ed-3cc990b4f20a
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]
Edited by: Ludek Uher on Dec 8, 2011 6:31 AM

SSRS 2008 R2 - Try to Open RDL - I got an error saying "Failed to open report 'reports_List.rdl' ... "Invalid character in the given encoding. Line 1, position 1".

Hi,
I am working on SSRS 2008 R2.
My Colleague gave me one RDL. I have added it to my SSRS project on BIDS & Tried to Open by double-click on that RDL.
I got a popup error saying "Failed to open report 'reports_List.rdl'. clicked on
Details button & noticed error explanation as . "Invalid character in the given encoding. Line 1, position 1".
When i try to View Code of this RDL, I got another error message saying "Exception from HRESULT: 0x80041FEB"
Can anybody suggest me ... what exactly the root cause of it? how can i resolve it ?
thanks a lot in advance !
best regards,
Venkat

Hi Venkat,
Did you use Visual Studio 2010 on your test? It is a known issue of Visual Studio 2010. Please refer to the following document. It has fix method provided by the Microsoft Web Development Tools team to work around the issue.
https://connect.microsoft.com/VisualStudio/feedback/details/552134/hresult-error-creating-timetracking-sample-web-site-project
Since the issue related to Visual Studio. I suggestion you post the question in the following forum:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=Vsexpressvb
It is appropriate and more experts will assist you.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Error while opening project from P6 EPPM 8.3

Hi All,
I had done connection between P6 and PRA using windows service.
But when i am trying to open P6 project and entering my user "admin" user ID and password i am getting below error.
Login failde to user admin.
Error;
Code=80041b5c
Code meaning= IDispatch error #6492
Source=P3eIntegration.P3ejLink.1
Description=error-Login failed
When i am clicking on "OK" and opening log file, i am getting below error.
Creating the Java Virtual Machine...
Settings being used from HKEY_CURRENT_USER\Software\ORACLE\Primavera Risk Analysis\Primavera are
IntegrationApplicationLocation =
IntegrationJarFiles = C:\Program Files (x86)\Oracle\WS\WS8.1\WSIntegration.jar;C:\Program Files (x86)\Oracle\osdt_core.jar;C:\Program Files (x86)\Oracle\osdt_saml.jar;C:\Program Files (x86)\Oracle\osdt_wss.jar;C:\Program Files (x86)\Oracle\osdt_xmlsec.jar;C:\Program Files (x86)\Oracle\WS\WS8.1\p6ws-jaxws-client.jar;C:\Users\kishor.kokitkar\Desktop\SAFARI\Software\apache-cxf-2.2.7\apache-cxf-2.2.7\lib\cxf-manifest.jar;
IntegrationJRELocation = C:\Program Files (x86)\Java\jre7
IntegrationBootstrapFile = BREBootStrap.xml
JVMHeapSize = 512M
Java Virtual Machine Created...
Connecting to Primavera P6 using Java API...
Checking connection configuration...
Failed to Import Project...
The following messages have been written to the Java Console:
Apr 30, 2014 6:55:53 PM org.springframework.context.support.AbstractApplicationContext prepareRefresh
INFO: Refreshing org.apache.cxf.bus.spring.BusApplicationContext@1a01e8a: display name [org.apache.cxf.bus.spring.BusApplicationContext@1a01e8a]; startup date [Wed Apr 30 18:55:53 IST 2014]; root of context hierarchy
Apr 30, 2014 6:55:53 PM org.springframework.beans.factory.support.DefaultListableBeanFactory registerBeanDefinition
INFO: Overriding bean definition for bean 'org.apache.cxf.transport.http.policy.HTTPClientAssertionBuilder': replacing [Generic bean: class [org.apache.cxf.transport.http.policy.HTTPClientAssertionBuilder]; scope=singleton; abstract=false; lazyInit=false; autowireMode=0; dependencyCheck=0; autowireCandidate=true; primary=false; factoryBeanName=null; factoryMethodName=null; initMethodName=null; destroyMethodName=null; defined in URL [jar:file:/C:/Users/kishor.kokitkar/Desktop/SAFARI/Software/apache-cxf-2.2.7/apache-cxf-2.2.7/lib/cxf-2.2.7.jar!/META-INF/cxf/cxf-extension-http.fixml]] with [Generic bean: class [org.apache.cxf.transport.http.policy.HTTPClientAssertionBuilder]; scope=singleton; abstract=false; lazyInit=false; autowireMode=0; dependencyCheck=0; autowireCandidate=true; primary=false; factoryBeanName=null; factoryMethodName=null; initMethodName=null; destroyMethodName=null; defined in URL [jar:file:/C:/Users/kishor.kokitkar/Desktop/SAFARI/Software/apache-cxf-2.2.7/apache-cxf-2.2.7/lib/cxf-2.2.7.jar!/META-INF/cxf/cxf-extension-http.fixml]]
Apr 30, 2014 6:55:53 PM org.springframework.beans.factory.support.DefaultListableBeanFactory registerBeanDefinition
INFO: Overriding bean definition for bean 'org.apache.cxf.transport.http.policy.HTTPServerAssertionBuilder': replacing [Generic bean: class [org.apache.cxf.transport.http.policy.HTTPServerAssertionBuilder]; scope=singleton; abstract=false; lazyInit=false; autowireMode=0; dependencyCheck=0; autowireCandidate=true; primary=false; factoryBeanName=null; factoryMethodName=null; initMethodName=null; destroyMethodName=null; defined in URL [jar:file:/C:/Users/kishor.kokitkar/Desktop/SAFARI/Software/apache-cxf-2.2.7/apache-cxf-2.2.7/lib/cxf-2.2.7.jar!/META-INF/cxf/cxf-extension-http.fixml]] with [Generic bean: class [org.apache.cxf.transport.http.policy.HTTPServerAssertionBuilder]; scope=singleton; abstract=false; lazyInit=false; autowireMode=0; dependencyCheck=0; autowireCandidate=true; primary=false; factoryBeanName=null; factoryMethodName=null; initMethodName=null; destroyMethodName=null; defined in URL [jar:file:/C:/Users/kishor.kokitkar/Desktop/SAFARI/Software/apache-cxf-2.2.7/apache-cxf-2.2.7/lib/cxf-2.2.7.jar!/META-INF/cxf/cxf-extension-http.fixml]]
Apr 30, 2014 6:55:53 PM org.springframework.beans.factory.support.DefaultListableBeanFactory registerBeanDefinition
INFO: Overriding bean definition for bean 'org.apache.cxf.transport.http.policy.NoOpPolicyInterceptorProvider': replacing [Generic bean: class [org.apache.cxf.transport.http.policy.NoOpPolicyInterceptorProvider]; scope=singleton; abstract=false; lazyInit=false; autowireMode=0; dependencyCheck=0; autowireCandidate=true; primary=false; factoryBeanName=null; factoryMethodName=null; initMethodName=null; destroyMethodName=null; defined in URL [jar:file:/C:/Users/kishor.kokitkar/Desktop/SAFARI/Software/apache-cxf-2.2.7/apache-cxf-2.2.7/lib/cxf-2.2.7.jar!/META-INF/cxf/cxf-extension-http.fixml]] with [Generic bean: class [org.apache.cxf.transport.http.policy.NoOpPolicyInterceptorProvider]; scope=singleton; abstract=false; lazyInit=false; autowireMode=0; dependencyCheck=0; autowireCandidate=true; primary=false; factoryBeanName=null; factoryMethodName=null; initMethodName=null; destroyMethodName=null; defined in URL [jar:file:/C:/Users/kishor.kokitkar/Desktop/SAFARI/Software/apache-cxf-2.2.7/apache-cxf-2.2.7/lib/cxf-2.2.7.jar!/META-INF/cxf/cxf-extension-http.fixml]]
Apr 30, 2014 6:55:53 PM org.springframework.beans.factory.support.DefaultListableBeanFactory registerBeanDefinition
INFO: Overriding bean definition for bean 'org.apache.cxf.transport.http.ClientOnlyHTTPTransportFactory': replacing [Generic bean: class [org.apache.cxf.transport.http.ClientOnlyHTTPTransportFactory]; scope=singleton; abstract=false; lazyInit=true; autowireMode=0; dependencyCheck=0; autowireCandidate=true; primary=false; factoryBeanName=null; factoryMethodName=null; initMethodName=null; destroyMethodName=null; defined in URL [jar:file:/C:/Users/kishor.kokitkar/Desktop/SAFARI/Software/apache-cxf-2.2.7/apache-cxf-2.2.7/lib/cxf-2.2.7.jar!/META-INF/cxf/cxf-extension-http.fixml]] with [Generic bean: class [org.apache.cxf.transport.http.ClientOnlyHTTPTransportFactory]; scope=singleton; abstract=false; lazyInit=true; autowireMode=0; dependencyCheck=0; autowireCandidate=true; primary=false; factoryBeanName=null; factoryMethodName=null; initMethodName=null; destroyMethodName=null; defined in URL [jar:file:/C:/Users/kishor.kokitkar/Desktop/SAFARI/Software/apache-cxf-2.2.7/apache-cxf-2.2.7/lib/cxf-2.2.7.jar!/META-INF/cxf/cxf-extension-http.fixml]]
Apr 30, 2014 6:55:53 PM org.springframework.context.support.AbstractApplicationContext obtainFreshBeanFactory
INFO: Bean factory for application context [org.apache.cxf.bus.spring.BusApplicationContext@1a01e8a]: org.springframework.beans.factory.support.DefaultListableBeanFactory@7a7e40
Apr 30, 2014 6:55:53 PM org.springframework.beans.factory.support.DefaultListableBeanFactory preInstantiateSingletons
INFO: Pre-instantiating singletons in org.springframework.beans.factory.support.DefaultListableBeanFactory@7a7e40: defining beans [cxf,org.apache.cxf.bus.spring.BusApplicationListener,org.apache.cxf.bus.spring.BusWiringBeanFactoryPostProcessor,org.apache.cxf.bus.spring.Jsr250BeanPostProcessor,org.apache.cxf.bus.spring.BusExtensionPostProcessor,org.apache.cxf.resource.ResourceManager,org.apache.cxf.configuration.Configurer,org.apache.cxf.binding.BindingFactoryManager,org.apache.cxf.transport.DestinationFactoryManager,org.apache.cxf.transport.ConduitInitiatorManager,org.apache.cxf.wsdl.WSDLManager,org.apache.cxf.phase.PhaseManager,org.apache.cxf.workqueue.WorkQueueManager,org.apache.cxf.buslifecycle.BusLifeCycleManager,org.apache.cxf.endpoint.ServerRegistry,org.apache.cxf.endpoint.ServerLifeCycleManager,org.apache.cxf.endpoint.ClientLifeCycleManager,org.apache.cxf.transports.http.QueryHandlerRegistry,org.apache.cxf.endpoint.EndpointResolverRegistry,org.apache.cxf.headers.HeaderManager,org.apache.cxf.catalog.OASISCatalogManager,org.apache.cxf.endpoint.ServiceContractResolverRegistry,org.apache.cxf.binding.corba.CorbaBindingFactory,org.apache.cxf.binding.corba.wsdl.WSDLExtensionRegister#0,org.apache.cxf.jaxws.context.WebServiceContextResourceResolver,org.apache.cxf.jaxws.context.WebServiceContextImpl,org.apache.cxf.binding.soap.SoapBindingFactory,org.apache.cxf.binding.soap.SoapTransportFactory,org.apache.cxf.binding.soap.customEditorConfigurer,org.apache.cxf.binding.xml.XMLBindingFactory,org.apache.cxf.ws.addressing.policy.AddressingAssertionBuilder,org.apache.cxf.ws.addressing.policy.AddressingPolicyInterceptorProvider,org.apache.cxf.ws.addressing.policy.UsingAddressingAssertionBuilder,org.apache.cxf.javascript.JavascriptQueryHandlerRegistry,org.apache.cxf.transport.local.LocalTransportFactory,org.apache.cxf.transport.http.policy.HTTPClientAssertionBuilder,org.apache.cxf.transport.http.policy.HTTPServerAssertionBuilder,org.apache.cxf.transport.http.policy.NoOpPolicyInterceptorProvider,org.apache.cxf.transport.http.ClientOnlyHTTPTransportFactory,org.apache.cxf.management.InstrumentationManager,org.apache.cxf.transport.http_jetty.JettyHTTPTransportFactory,org.apache.cxf.transport.jms.JMSTransportFactory,org.apache.cxf.binding.object.ObjectBindingFactory,org.apache.cxf.binding.http.HttpBindingFactory,org.apache.cxf.jaxrs.JAXRSBindingFactory,org.apache.cxf.ws.security.policy.WSSecurityPolicyLoader,org.apache.cxf.ws.policy.AssertionBuilderRegistry,org.apache.cxf.ws.policy.PolicyInterceptorProviderRegistry,org.apache.cxf.ws.policy.attachment.external.DomainExpressionBuilderRegistry,org.apache.cxf.ws.policy.attachment.external.EndpointReferenceDomainExpressionBuilder,org.apache.cxf.ws.policy.PolicyBuilder,org.apache.cxf.ws.policy.PolicyEngine,org.apache.cxf.ws.policy.attachment.wsdl11.Wsdl11AttachmentPolicyProvider,org.apache.cxf.ws.policy.attachment.ServiceModelPolicyProvider,org.apache.cxf.ws.policy.mtom.MTOMAssertionBuilder,org.apache.cxf.ws.policy.mtom.MTOMPolicyInterceptorProvider,org.apache.cxf.ws.rm.RMManager,org.apache.cxf.ws.rm.policy.RMPolicyInterceptorProvider,org.apache.cxf.ws.rm.RMAssertionBuilder]; root of factory hierarchy
Apr 30, 2014 6:55:55 PM org.apache.cxf.service.factory.ReflectionServiceFactoryBean buildServiceFromWSDL
INFO: Creating Service {http://xmlns.oracle.com/Primavera/P6/WS/User/V1}UserService from WSDL: http://localhost:8206/p6ws/services/UserService?wsdl
javax.xml.ws.soap.SOAPFaultException: Encryption is enabled but there is no encrypted key in the request.
at org.apache.cxf.jaxws.JaxWsClientProxy.invoke(JaxWsClientProxy.java:146)
at com.sun.proxy.$Proxy41.readUsers(Unknown Source)
at p3eintegration.P3eSession.getUser(P3eSession.java:1718)
at p3eintegration.P3eSession.connect(P3eSession.java:292)
Caused by: org.apache.cxf.binding.soap.SoapFault: Encryption is enabled but there is no encrypted key in the request.
at org.apache.cxf.binding.soap.interceptor.Soap11FaultInInterceptor.unmarshalFault(Soap11FaultInInterceptor.java:75)
at org.apache.cxf.binding.soap.interceptor.Soap11FaultInInterceptor.handleMessage(Soap11FaultInInterceptor.java:46)
at org.apache.cxf.binding.soap.interceptor.Soap11FaultInInterceptor.handleMessage(Soap11FaultInInterceptor.java:35)
at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:243)
at org.apache.cxf.interceptor.AbstractFaultChainInitiatorObserver.onMessage(AbstractFaultChainInitiatorObserver.java:99)
at org.apache.cxf.binding.soap.interceptor.CheckFaultInterceptor.handleMessage(CheckFaultInterceptor.java:69)
at org.apache.cxf.binding.soap.interceptor.CheckFaultInterceptor.handleMessage(CheckFaultInterceptor.java:34)
at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:243)
at org.apache.cxf.endpoint.ClientImpl.onMessage(ClientImpl.java:672)
at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.handleResponseInternal(HTTPConduit.java:2254)
at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.handleResponse(HTTPConduit.java:2134)
at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.close(HTTPConduit.java:1988)
at org.apache.cxf.transport.AbstractConduit.close(AbstractConduit.java:66)
at org.apache.cxf.transport.http.HTTPConduit.close(HTTPConduit.java:639)
at org.apache.cxf.interceptor.MessageSenderInterceptor$MessageSenderEndingInterceptor.handleMessage(MessageSenderInterceptor.java:62)
at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:243)
at org.apache.cxf.endpoint.ClientImpl.invoke(ClientImpl.java:484)
at org.apache.cxf.endpoint.ClientImpl.invoke(ClientImpl.java:310)
at org.apache.cxf.endpoint.ClientImpl.invoke(ClientImpl.java:262)
at org.apache.cxf.frontend.ClientProxy.invokeSync(ClientProxy.java:73)
at org.apache.cxf.jaxws.JaxWsClientProxy.invoke(JaxWsClientProxy.java:124)
... 3 more
End of Java messages

You can look at the below notes at My Oracle Support site. It has the solution
Event Code: "CNFII-2364-D" When Attempting to Export to Excel (xls) [ID 1125363.1]
Error: "CNFII-2364-D - Could Not Find Installable ISAM" When Exporting To Excel From P6 Project Management [ID 898812.1]
Cause
This problem is caused when the incorrect path name is stored in the registry for the msexcl40.dll file or if this file is missing or corrupt.
Sachin Gupta

Error in Crystal report( built on Universe) preview in CMC - Failed to load DB credentials or Failed to open Connection

Hi,
      I created a Crystal Report (CR XI r2) using Universe and database is Db2.
     My report is working fine in Crystal report ,.But when i am uploading this report (Save AS ->enterprise) to repository ,and then trying to preview this report from CMC/Infoview,it throws error "Failed to load DB credentials "or sometimes it throws" Failed to open Connection" .
I have given DB user credentials correctly and used both option "prompt user for DB logo" as well as "use same database logon" .
I am not sure why it is throwing this error.I checked both "Bo server machine as well as Client machine ,both are having DB2 cleint installed and configured.
Is this an issue with Service Packs ?
As my machine configuration is -
     BO Client - BO XI R2 RTM + SP1+SP2
     BO Server (Linux) - BO XI R2 RTM
If anybody faces the same issue ,please share the solution with me,as it is very urgent .
Thanks
Nitin

Hello,
Thank you for your post.
Based on your description, your issue is out of support of VS General Question forum which mainly discusses
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I suggest that you can consult your issue directly on SAP Crystal Reports:
http://scn.sap.com/community/crystal-reports/content?filterID=content~objecttype~objecttype[thread]
  for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to resolve "Failed to open the panel socket"?

I am trying to run some of our Flexunit tests on Unix OS. To setup my environment I followed all of the steps on http://docs.flexunit.org/index.php?title=Ant_Task document. My environment is now:
OS: RedHat 5 64bit
SDK 4.1.0
Flexunit version 4.1.0-8-as3_4.1.0.16076
Flash Player 10.3.181.34
Apache Ant 1.8.2
I am trying to compile and run the provided sample application “FlexUnit4SampleCIProject” with the included ant build script. The application gets compiled fine but flash player fails to run the tests. The only error message that I see in the console is “Failed to open the panel socket” Below is the complete log from the console. Does anyone know what I am doing wrong?
Any help is greatly appreciated!
===================================================================================
[demomictay@rdcesx09113 FlexUnit4SampleCIProject]$ ant -v clean package
Apache Ant(TM) version 1.8.2 compiled on December 20 2010
Trying the default build file: build.xml
Buildfile: /home/demomictay/proj/FlexUnit4SampleCIProject/build.xml
Detected Java version: 1.6 in: /usr/java/jdk1.6.0_26/jre
Detected OS: Linux
parsing buildfile /home/demomictay/proj/FlexUnit4SampleCIProject/build.xml with URI = file:/home/demomictay/proj/FlexUnit4SampleCIProject/build.xml
Project base dir set to: /home/demomictay/proj/FlexUnit4SampleCIProject
parsing buildfile jar:file:/home/demomictay/apache-ant-1.8.2/lib/ant.jar!/org/apache/tools/ant/antlib.xml with URI = jar:file:/home/demomictay/apache-ant-1.8.2/lib/ant.jar!/org/apache/tools/ant/antlib.xml from a zip file
[property] Loading Environment env.
Build sequence for target(s) `clean' is [clean]
Complete build sequence is [clean, init, compile, test, package, ]
clean:
   [delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target
   [delete] Deleting /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.mxml
   [delete] Deleting /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.swf
   [delete] Deleting /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/Main.swf
   [delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin
   [delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target/report
   [delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target/dist
   [delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target
Build sequence for target(s) `package' is [init, compile, test, package]
Complete build sequence is [init, compile, test, package, clean, ]
init:
    [mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target
    [mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin
    [mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target/report
    [mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target/dist
compile:
    [mxmlc] Loading configuration file /home/demomictay/sdk/frameworks/flex-config.xml
    [mxmlc] /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/Main.swf (58111 bytes)
test:
[flexunit] Validating task attributes ...
[flexunit] OS: [Linux]
[flexunit] Generating default values ...
[flexunit] Using the following settings for compilation:
[flexunit]     FLEX_HOME: [/home/demomictay/sdk]
[flexunit]     player: [flash]
[flexunit]     sourceDirectories: ["/home/demomictay/proj/FlexUnit4SampleCIProject/src/main/flex"]
[flexunit]     testSourceDirectories: ["/home/demomictay/proj/FlexUnit4SampleCIProject/src/test/flex"]
[flexunit]     libraries: ["/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-4.1.0-8-as3_4.1.0.16076.sw c","/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-4.1.0-8-flex_4.1.0.16076. swc","/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-aircilistener-4.1.0-8-4 .1.0.16076.swc","/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-cilistener-4 .1.0-8-4.1.0.16076.swc","/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-flex coverlistener-4.1.0-8-4.1.0.16076.swc","/home/demomictay/proj/FlexUnit4SampleCIProject/lib s/flexunit-uilistener-4.1.0-8-4.1.0.16076.swc","/home/demomictay/proj/FlexUnit4SampleCIPro ject/libs/fluint-extensions-4.1.0-8-4.1.0.16076.swc"]
     [null] Executing '/usr/java/jdk1.6.0_26/jre/bin/java' with arguments:
     [null] '-jar'
     [null] '/home/demomictay/sdk/lib/mxmlc.jar'
     [null] '--version'
     [null]
     [null] The ' characters around the executable and arguments are
     [null] not part of the command.
     [null] Output redirected to property: SDK_VERSION
[flexunit] Found SDK version: 4
[flexunit] Created test runner at [/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.mxml]
[flexunit] Compiling test classes: [org.flexunit.demo.EchoPanelTest, org.flexunit.demo.SampleTest]
[flexunit] Executing '/usr/java/jdk1.6.0_26/jre/bin/java' with arguments:
[flexunit] '-Xmx256M'
[flexunit] '-jar'
[flexunit] '/home/demomictay/sdk/lib/mxmlc.jar'
[flexunit] '+flexlib'
[flexunit] '/home/demomictay/sdk/frameworks'
[flexunit] '-output'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.swf'
[flexunit] '-source-path'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/src/main/flex'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/src/test/flex'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-4.1.0-8-as3_ 4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-4.1.0-8-flex _4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-aircilistene r-4.1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-cilistener-4 .1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-flexcoverlis tener-4.1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-uilistener-4 .1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/fluint-extensions-4.1 .0-8-4.1.0.16076.swc'
[flexunit] '-debug=false'
[flexunit] '-headless-server=true'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.mxml'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
     [null] Error redirected to property: MXMLC_ERROR
     [null] Loading configuration file /home/demomictay/sdk/frameworks/flex-config.xml
     [null] /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.swf (104083 bytes)
[flexunit] Using the following settings for the test run:
[flexunit]     FLEX_HOME: [/home/demomictay/sdk]
[flexunit]     haltonfailure: [true]
[flexunit]     headless: [true]
[flexunit]     display: [7000]
[flexunit]     localTrusted: [true]
[flexunit]     player: [flash]
[flexunit]     port: [1024]
[flexunit]     swf: [/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.swf]
[flexunit]     timeout: [60000ms]
[flexunit]     toDir: [/home/demomictay/proj/FlexUnit4SampleCIProject/target/report]
[flexunit] Setting up server process ...
[flexunit] Starting server ...
[flexunit] Starting xvnc
[flexunit] Attempting start on :7000 ...
[flexunit] Executing 'vncserver' with arguments:
[flexunit] ':7000'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit]
[flexunit] New 'rdcesx09113:7000 (demomictay)' desktop is rdcesx09113:7000
[flexunit]
[flexunit] Starting applications specified in /home/demomictay/.vnc/xstartup
[flexunit] Log file is /home/demomictay/.vnc/rdcesx09113:7000.log
[flexunit]
[flexunit] Setting DISPLAY=:7000
[flexunit] Entry [/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin] already available in local trust file at [/home/demomictay/.macromedia/Flash_Player/#Security/FlashPlayerTrust/flexUnit.cfg].
[flexunit] Executing 'gflashplayer' with arguments:
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner.swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to allocate the agent. Exitting...
[flexunit] Failed to invoking the agent: No such file or directory
[flexunit] Cannot launch the agent
[flexunit] The messenger is now down
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
===================================================================================

Hi bastini-
Could you please tell me, specifically, which version of RedHat 5 64-bit you're using? For instance, is it RHEL or RHEV; server or desktop? Just want to replicate your environment as closely as possible.
Cheers,
Thomas Fowler
bastani wrote:
I am trying to run some of our Flexunit tests on Unix OS. To setup my environment I followed all of the steps on http://docs.flexunit.org/index.php?title=Ant_Task document. My environment is now:
OS: RedHat 5 64bit
SDK 4.1.0
Flexunit version 4.1.0-8-as3_4.1.0.16076
Flash Player 10.3.181.34
Apache Ant 1.8.2
I am trying to compile and run the provided sample application “FlexUnit4SampleCIProject” with the included ant build script. The application gets compiled fine but flash player fails to run the tests. The only error message that I see in the console is “Failed to open the panel socket” Below is the complete log from the console. Does anyone know what I am doing wrong?
Any help is greatly appreciated!
====================================================================== =============
[demomictay@rdcesx09113 FlexUnit4SampleCIProject]$ ant -v clean package
Apache Ant(TM) version 1.8.2 compiled on December 20 2010
Trying the default build file: build.xml
Buildfile: /home/demomictay/proj/FlexUnit4SampleCIProject/build.xml
Detected Java version: 1.6 in: /usr/java/jdk1.6.0_26/jre
Detected OS: Linux
parsing buildfile /home/demomictay/proj/FlexUnit4SampleCIProject/build.xml with URI = file:/home/demomictay/proj/FlexUnit4SampleCIProject/build.xml
Project base dir set to: /home/demomictay/proj/FlexUnit4SampleCIProject
parsing buildfile jar:file:/home/demomictay/apache-ant-1.8.2/lib/ant.jar!/org/apache/to ols/ant/antlib.xml with URI = jar:file:/home/demomictay/apache-ant-1.8.2/lib/ant.jar!/org/apache/to ols/ant/antlib.xml from a zip file
[property] Loading Environment env.
Build sequence for target(s) `clean' is [clean]
Complete build sequence is [clean, init, compile, test, package, ]
clean:
   [delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target
   [delete] Deleting /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner. mxml
   [delete] Deleting /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner. swf
   [delete] Deleting /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/Main.swf
   [delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin
   [delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target/report
   [delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target/dist
   [delete] Deleting directory /home/demomictay/proj/FlexUnit4SampleCIProject/target
Build sequence for target(s) `package' is [init, compile, test, package]
Complete build sequence is [init, compile, test, package, clean, ]
init:
    [mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target
    [mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin
    [mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target/report
    [mkdir] Created dir: /home/demomictay/proj/FlexUnit4SampleCIProject/target/dist
compile:
    [mxmlc] Loading configuration file /home/demomictay/sdk/frameworks/flex-config.xml
    [mxmlc] /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/Main.swf (58111 bytes)
test:
[flexunit] Validating task attributes ...
[flexunit] OS: [Linux]
[flexunit] Generating default values ...
[flexunit] Using the following settings for compilation:
[flexunit]     FLEX_HOME: [/home/demomictay/sdk]
[flexunit]     player: [flash]
[flexunit]     sourceDirectories: ["/home/demomictay/proj/FlexUnit4SampleCIProject/src/main/flex"]
[flexunit]     testSourceDirectories: ["/home/demomictay/proj/FlexUnit4SampleCIProject/src/test/flex"]
[flexunit]     libraries: ["/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-4.1.0- 8-as3_4.1.0.16076.swc","/home/demomictay/proj/FlexUnit4SampleCIProject /libs/flexunit-4.1.0-8-flex_4.1.0.16076.swc","/home/demomictay/proj/Fl exUnit4SampleCIProject/libs/flexunit-aircilistener-4.1.0-8-4.1.0.16076 .swc","/home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-ci listener-4.1.0-8-4.1.0.16076.swc","/home/demomictay/proj/FlexUnit4Samp leCIProject/libs/flexunit-flexcoverlistener-4.1.0-8-4.1.0.16076.swc"," /home/demomictay/proj/FlexUnit4SampleCIProject/libs/flexunit-uilistene r-4.1.0-8-4.1.0.16076.swc","/home/demomictay/proj/FlexUnit4SampleCIPro ject/libs/fluint-extensions-4.1.0-8-4.1.0.16076.swc"]
     [null] Executing '/usr/java/jdk1.6.0_26/jre/bin/java' with arguments:
     [null] '-jar'
     [null] '/home/demomictay/sdk/lib/mxmlc.jar'
     [null] '--version'
     [null]
     [null] The ' characters around the executable and arguments are
     [null] not part of the command.
     [null] Output redirected to property: SDK_VERSION
[flexunit] Found SDK version: 4
[flexunit] Created test runner at [/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner .mxml]
[flexunit] Compiling test classes: [org.flexunit.demo.EchoPanelTest, org.flexunit.demo.SampleTest]
[flexunit] Executing '/usr/java/jdk1.6.0_26/jre/bin/java' with arguments:
[flexunit] '-Xmx256M'
[flexunit] '-jar'
[flexunit] '/home/demomictay/sdk/lib/mxmlc.jar'
[flexunit] '+flexlib'
[flexunit] '/home/demomictay/sdk/frameworks'
[flexunit] '-output'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner .swf'
[flexunit] '-source-path'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/src/main/flex'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/src/test/flex'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/f lexunit-4.1.0-8-as3_4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/f lexunit-4.1.0-8-flex_4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/f lexunit-aircilistener-4.1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/f lexunit-cilistener-4.1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/f lexunit-flexcoverlistener-4.1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/f lexunit-uilistener-4.1.0-8-4.1.0.16076.swc'
[flexunit] '-library-path+=/home/demomictay/proj/FlexUnit4SampleCIProject/libs/f luint-extensions-4.1.0-8-4.1.0.16076.swc'
[flexunit] '-debug=false'
[flexunit] '-headless-server=true'
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner .mxml'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
     [null] Error redirected to property: MXMLC_ERROR
     [null] Loading configuration file /home/demomictay/sdk/frameworks/flex-config.xml
     [null] /home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner. swf (104083 bytes)
[flexunit] Using the following settings for the test run:
[flexunit]     FLEX_HOME: [/home/demomictay/sdk]
[flexunit]     haltonfailure: [true]
[flexunit]     headless: [true]
[flexunit]     display: [7000]
[flexunit]     localTrusted: [true]
[flexunit]     player: [flash]
[flexunit]     port: [1024]
[flexunit]     swf: [/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner .swf]
[flexunit]     timeout: [60000ms]
[flexunit]     toDir: [/home/demomictay/proj/FlexUnit4SampleCIProject/target/report]
[flexunit] Setting up server process ...
[flexunit] Starting server ...
[flexunit] Starting xvnc
[flexunit] Attempting start on :7000 ...
[flexunit] Executing 'vncserver' with arguments:
[flexunit] ':7000'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit]
[flexunit] New 'rdcesx09113:7000 (demomictay)' desktop is rdcesx09113:7000
[flexunit]
[flexunit] Starting applications specified in /home/demomictay/.vnc/xstartup
[flexunit] Log file is /home/demomictay/.vnc/rdcesx09113:7000.log
[flexunit]
[flexunit] Setting DISPLAY=:7000
[flexunit] Entry [/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin] already available in local trust file at [/home/demomictay/.macromedia/Flash_Player/#Security/FlashPlayerTrust /flexUnit.cfg].
[flexunit] Executing 'gflashplayer' with arguments:
[flexunit] '/home/demomictay/proj/FlexUnit4SampleCIProject/target/bin/TestRunner .swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to open the panel socket
[flexunit] Failed to allocate the agent. Exitting...
[flexunit] Failed to invoking the agent: No such file or directory
[flexunit] Cannot launch the agent
[flexunit] The messenger is now down
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
====================================================================== =============

Cannot open .project file

b I have a Turnkey installation of ES 801. It is running in a VM.
When I login to Workbench, the eclipse log records this exception (only the first few lines are listed, followed by the 'Caused by' line is listed below):
!ENTRY com.adobe.ide.singlesignon 4 4 2007-11-08 05:45:56.281
!MESSAGE login notification failed
!STACK 0
java.lang.IllegalStateException
at com.adobe.ide.singlesignon.IDESession.getProject(Unknown Source)
at com.adobe.ide.singlesignon.IDESession.getProject(Unknown Source)
Caused by: org.eclipse.core.internal.resources.ResourceException: The project description file (.project) for es801-trnkey-a 87.128 is missing. This file contains important information about the project. The project will not function properly until this file is restored.
b I also get this message when I attempt to access the repository. This is when I am browsing for a Tempplate URL when a new xfaForm process variable is being specified. Again only the first few lines of trace and the 'Caused by' line are listed.
!ENTRY com.adobe.workflow.editor 4 4 2007-11-08 06:14:10.531
!MESSAGE Failed to open repository picker dialog
!STACK 0
java.lang.IllegalStateException
Caused by: org.eclipse.core.internal.resources.ResourceException: The project description file (.project) for es801-trnkey-a 87.128 is missing. This file contains important information about the project. The project will not function properly until this file is restored.

Thank you Jasmin. The deletion of the workbench connection config and re-creation fixed the problem.
Are you aware of WorkBench documentation that is better then Creating First LiveCycle ES Application or WorkBench ES help?
I would like details relating to properties on the various actions one puts on the process design pallet for instance.
Thanks again!
Peter Bourke

LV RTE cannot open project files that have .lvlib references in Dependencies

I'm writing a LabVIEW DLL to inspect LabVIEW project files, and I've noticed that if a project has a .lvlib reference in its Dependencies, then the Run-Time Engine contradicts itself about whether or not it can find the project file:
Project.Open returns error 7 (file not found)
Project.GetFileLVVersion is successful
Here are snippets from my G and C code that exercise this behavior:
int openStatus = StatusSuccess;
char* projectVersion = createStringWithLength(VersionStringLength);
printf("Analyzing %s\n", pathString);
OpenProject(pathString, &openStatus, projectVersion, VersionStringLength);
printf(" Project written in LabVIEW %s\n", projectVersion);
if (openStatus == StatusSuccess)
printf(" Opened project file.\n");
else
printf("Error: Could not find project file, or file was not a project file (error code %i).\n", openStatus);
However, when running in the development environment, both methods succeed.
Is this a bug, and if so, is it fixed in LabVIEW 2014?
Here is how you can reproduce it:
Prerequisites:
LabVIEW 2013 SP1 32-bit
ConEmu for a good console -- https://code.google.com/p/conemu-maximus5/wiki/Downloads
minGW for compiling a program to use the LabVIEW DLL -- http://sourceforge.net/projects/mingw/files
.lvlib reference in Dependencies breaks Project.Open in LV RTE
Unzip the attachment into a temporary directory (eg c:\xtra\temp)
Open "OpenProject.lvproj" in LabVIEW.
Build "Open Project Library".
Using ConEmu with a bash prompt, navigate to the temporary directory.
Type make
$ make
patching file `builds/platdefines.h'
gcc -std=c99 -g OpenProject.c -o OpenProject.exe -lOpenProject -Lbuilds
6. Type OpenProject 'c:\xtra\temp\OpenProject.lvproj'
$ OpenProject 'c:\xtra\temp\OpenProject.lvproj'
Analyzing c:\xtra\temp\OpenProject.lvproj
Project written in LabVIEW 13.0
Opened project file.
7. Notice that both invoke nodes execute correctly.
8. Type OpenProject 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj'
$ OpenProject 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj'
Analyzing c:\xtra\temp\OpenProjectWithLvlibDep.lvproj
Project written in LabVIEW 13.0
Error: Could not find project file, or file was not a project file (error code 7).
9. Notice that the version node succeeded while the open one failed.
10. Type diff OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
$ diff -u OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
--- OpenProject.lvproj Tue Nov 4 11:28:28 2014
+++ OpenProjectWithLvlibDep.lvproj Tue Nov 4 11:32:37 2014
@@ -13,7 +13,11 @@
<Property Name="server.vi.propertiesEnabled" Type="Bool">true</Property>
<Property Name="specify.custom.address" Type="Bool">false</Property>
<Item Name="OpenProject.vi" Type="VI" URL="../OpenProject.vi"/>
- <Item Name="Dependencies" Type="Dependencies"/>
+ <Item Name="Dependencies" Type="Dependencies">
+ <Item Name="vi.lib" Type="Folder">
+ <Item Name="NI_MABase.lvlib" Type="Library" URL="/<vilib>/measure/NI_MABase.lvlib"/>
+ </Item>
+ </Item>
<Item Name="Build Specifications" Type="Build">
<Item Name="Open Project Library" Type="DLL">
<Property Name="App_copyErrors" Type="Bool">true</Property>
Here is another way to trigger this behavior, which also shows that LabVIEW only sometimes tidies the Dependencies item:
Open "OpenProject.lvproj" in LabVIEW.
Add a new VI to the project and place the "Application Directory" file path constant its block diagram.
Select "File » Save All (this Project)" and use the default name for the new VI.
Type OpenProject 'c:\xtra\temp\OpenProject.lvproj'
Notice there is an error again, as is expected.
Remove the "Application Directory" file path constant.
Select "File » Save All (this Project)"
Type OpenProject 'c:\xtra\temp\OpenProject.lvproj'
Notice the problem is gone, as is expected.
Re-add the "Application Directory" file path constant to the block diagram.
Select "File » Save All (this Project)"
Type OpenProject 'c:\xtra\temp\OpenProject.lvproj'
Notice there is no problem, which is surprising as there should be an error since the Dependencies item hasn't been tidied.
Close the new VI and remove it from the project.
Select "File » Save All (this Project)"
Open "OpenProject.lvproj" in a text editor.
Notice the Dependencies item has been tidied.
Re-add the VI back to the project.
Select "File » Save All (this Project)"
Type OpenProject 'c:\xtra\temp\OpenProject.lvproj'
Notice there is an error again, as is expected.
Solved!
Go to Solution.
Attachments:
LVRTE_OpenProject.zip ‏10 KB

NInjaneer_wow wrote:
The same behavior occurs in LabVIEW RTE: a new project with an Application Directory constant in a blank vi will return error 7 - file not found, but still return the correct version of LabVIEW in which the project was created.
I've been experimenting with workarounds for this behavior, and I found one.
When I provide the LabVIEW path for libdir in my executable's ini file, the run-time is able to load and inspect the project file.
libdir="C:\Program Files\National Instruments\LabVIEW 2013"
While it's expected that a stand-alone executable may be placed on a system that doesn't have the LabVIEW IDE, it's still surprising to me that the Run-Time Engine cannot find LabVIEW's standard library without some explicit guidance. What other considerations contribute to that behavior?
References:
LabVIEW configuration file/Paths -- http://labviewwiki.org/LabVIEW_configuration_file/Paths

Opening projects that have a DVD menu.

I am unable to re-open projects that contain a DVD menu after I have correctly closed the project. Specifically, I have a series of MPEG videos (saved by Premiere Elements). They all open fine and run welel individually and collectively. I then put a DVD menu in with all the Chapter and Scene menu markers and then saved it and closed the project to come back to it at a later time. When I re-open I get the error "Sorry, a serious error has occured that requires Adobe Premiere elements to shut down . . ." and the whole program closes.
I have tried this twice with different videos and get the same result. I have never before tried to include a DVD menu in a Premiere 9 project. I have Windwos 7, 32 bit, plenty of memory and disc space, I have tried two different disc drives(both NTFS format) and reinstalled Premiere. Any suggestions would be appreciated. Thank you.

Welcome to the forum.
Unfortunately, you have posted to the Tips & Tricks sub-forum, which is a repository for articles on how to do specific things in Premiere. Few general users stop by here, so there will be few, if any, "eyes" on your issue. Maybe our tireless MOD, Steve Grisetti, can move this out to the main forum, where many more users will see your post.
I do not recall anyone else having issues with Opening any Projects, with DVD/BD Menus and navigation. The addition of those elements should not affect the ability to Open such Projects, but in your case, they do. I cannot imagine what is happening to cause those Projects to fail to Open, but maybe others will have similar experiences, and can offer some help. If the post can be moved to the main forum, it stands a greater chance that those users will see it, and can help.
Good luck,
Hunt

Failed to open the connection via BOE XI 3.1 CMC and Infoview

Beginning Migration Project to move Crystal Enterprise 9 reports to Crystal Reports 2008 w/ intention to schedule and view reports via BusinessObjects Enterprise XI 3.1 Central Management Console and InfoView.
I have created reports using Crystal Reports 2008 Designer and the reports run. Saved the reports to Business Objects Enterprise. I am able to view the reports via Crystal Reports viewer via Central Management Console and InfoView.
However, if scheduling the reports to run via CMC or InfoView, receiving the message "Failed to open the connection".
Any suggestions would be greatly appreciated.
Thanks
Edited by: Gale Waters on Oct 21, 2010 5:35 PM

Which is the version of your Sybase server?
Which is the version of your Sybase ODBC driver?
Do you use directly the ODBC drivers or do you use a universe that connects over an ODBC driver?
Regards,
Stratos

"failed to open document" help

I have been working on a flash file for school using CS5.5. Everything was working, and I even downloaded a trial of CS5.5 on my computer to work on the project, but now I am in class and it will not open. It keeps saying "failed to open document." I'm not sure what went wrong, and I need this file by next thursday for my class. I need to know if there is any way to fix this without redoing my entire project from scratch.

thank you! I'll let you know if it worked!
the only problem is that none of my tweens and actions are correct.

Link error: Failed to open external module

Newbie question #2... I'm in chapter 5 of the tutorial, just added the button to calculate min and max values of the sinewave. I get two link errors when I try to run the program.
2 Project link errors:
Failed to open external module
Failed to open external module
If I comment out the MaxMin1D function and fudge the min and max values the program runs.
Any ideas?
The function I added is as follows which appears to be identical to the sample in the tutorial.
int CVICALLBACK FindMaxMin (int panel, int control, int event,
       void *callbackData, int eventData1, int eventData2)
   ssize_t min_index;
   double min;
   ssize_t max_index;
   double max;
//   max = 5;
//   min = 3;
   switch (event)
       case EVENT_COMMIT:
           MaxMin1D(sine, 100, &max, &max_index, &min, &min_index);
           SetCtrlVal(panelHandle, PANEL_MAX, max);
           SetCtrlVal(panelHandle, PANEL_MIN, min);
           break;
       case EVENT_RIGHT_CLICK:
           break;
   return 0;

I searched for analysis.h, found it and copied it to the same folder as sample1.c and the program now links and runs.
I'm wondering if I'm missing something in the configuration (not smart enough to know where to search)???
Thanks

PREL 2.0 - Fails to open project

Similar Messages

Maybe you are looking for