PrEl 9. Do star ratings affect Instant movie results?

Hi everybody.
Do the star ratings that you assign to your videos in the Elements Organizer have any weigh or effect on the clips that are chosen by Adobe when you do an Instant Movie project?
I fist did a (rather typical) zoo movie, where the elefant turned out to be the main subject of the instant movie rather than my family. I guess the elefant clip was better iluminated, steady, etc and had the right smart tags so that it was shown a lot of times.
In another project for one of my kid's birthday I assigned star ratings to the clips that I liked before I ran the auto analyzer and created an instant movie. In the end I had more of the clips I liked in my instant movie.
I don't know if this was mere coincidence or if star rating had anything to do with it. I couldn't find any reference to star ratings in the premiere elements help where it talks about instant movie projects.
What has been your experience on this?
Thanks,
Asdrubal.

Thank you Steve.
I know the star rating doesn't affect the clips, I just wondered if they had any effect on the Instant Movie algorithms.
Like you say they must be only for personal reference, as there is no mention of them in the instant movie help files.

Similar Messages

  • Star ratings for movies

    Is there any plan to implement star ratings for movies? Every other cable system I ever used had these (Cablevision, Comcast), as does Tivo. There are a lot of movies in the listings, and I have found this feature extremely useful to help choosing. When I saw this wasn't on FIOS, I was very tempted to immediately go back to Cablevision, even though I love everything else about FIOS. Please implement this!!!

    Hey Tim... Verona neighbor here.  The only thing good about Comcast was their guide DATA.  They use Gemstar and Verizon uses FYI. 
    I have voiced my opinion as much as one can.  I can only hope they are listening and one day the guide will be accurate and as complete as the competitions.
    Fingers crossed!
    tim79 wrote:
    Is there any plan to implement star ratings for movies? Every other cable system I ever used had these (Cablevision, Comcast), as does Tivo. There are a lot of movies in the listings, and I have found this feature extremely useful to help choosing. When I saw this wasn't on FIOS, I was very tempted to immediately go back to Cablevision, even though I love everything else about FIOS. Please implement this!!!

  • How can I transfer my star ratings to my new computer?

    Just bought a new Dell. I have ITunes on my old computer, and have spent lots of time creating playlists and star ratings. How can I import that into my new computer? I have a video Ipod with my complete music library on it, and when I connect it to my new computer I can listen and change the ratings, but I can't transfer the music, or any of the playlist info. Ideas?

    Welcome to Apple Discussions!
    Does this help?
    Use Your iPod To Move Songs To A New Computer
    btabz

  • How to keep star ratings between catalogs?

    I'm sure this has been addressed, but can't seem to find it. My issue is simple: I have rated keeper images in one catalog, and I want to bring them into another catalog with those star ratings intact. I have saved metadata to the file, and I have "write xmp to file" checked. I'm dealing with RAW and jpegs, LR 4.2 OSX 10.7.5  What's the solution?

    The easiest solution is to use one catalog for all of your photos. Then there is no issue now, or in the future, of making sure both catalogs have the same star ratings (and many other benefits as well).
    But if you must have multiple catalogs, you can transfer the start ratings like this: select the desired photos in one catalog, then File->Export as Catalog, then go to the 2nd catalog and File->Import from Catalog. This makes sure that the star ratings match at the instant you do it. Future changes to star ratings would require you to repeat the process, as often as necessary, as you cannot keep these two catalogs in sync any other way. Hence the suggestion in the first paragraph

  • Star Ratings not shown.

    I have Photoshop 11 and wish to put the star ratings to my photos.  They are presently not being shown.  I followed the video which states to go into View and click on Details.  I did this and all the showed up was the date!  Help please. 

    If you are zoomed out to far (the thumbnails are too small), you will not longer see additional details like the star rating or file name. Move the zoom slider at the bottom to the right to 25% or more.

  • Lost star ratings on my chosen photos in Filmstrip mode....

    Hello,
    Have recently lost my star ratings on my files while in Filmstrip mode and the marker that showed that the file had been edited has disappeared ( the little half moon things on the upper right side of the photo... Please help. Im assuming it is a setting but dont know which one

    Were they raw images? Did you move them from one folder to another?
    A raw image from a Canon or Nikon or other cameras has a raw image that cannot store any changes you make to your image. Rather, ACR creates a side-car file that must be in the same folder as the images. You will see your file and the sidecar so (for example) a cannon image might be _MG_3404.CR2 and the sidecar file would be _MG_3404.XMP. As long as those two are in the same folder, everything is great. Until you move one or the other from the folder. Then Bridge, ACR, or PS doesn't know what to do because there are no clues for the original image to KNOW that a sidecar file exists. If you still have the sidecar files, simply rejoining the two into the same folder will sove the problem.
    One easy resolution to this is to convert the original image from the original fomat to a DNG. There are MANY MANY benefits to this (and no liabiliities) but for your circumstances, the sidecar file is stored in the DNG. Your original raw image is also stored within this DNG so they cannot be separated.
    There are many ways to convert your images to DNG, one is during the original downloading: if you are using Bridge's Photo Downloader, there is an option to convert them to DNG during downloading. That's what I always do. After the fact conversion can be done using Adobe's DNG Converter.
    http://www.adobe.com/products/photoshop/extend.displayTab2.html

  • Can Aperture recognize star ratings or keywords on import?

    I do all my initial sorting and culling of images outside Aperture (Photo Mechanic, which I highly recommend). I tag images with star ratings. I would like to import only those photos with a star rating above some threshold. Is there a way for Aperture to recognize those star ratings in the import dialog, such that I could filter the photos that I want to import? I would prefer to do that in place, rather than having to move or copy all those large RAW (NEF) files to another folder just for import into Aperture.  A related question would be whether Aperture could filter by keywords or other metadata that is already associated with an image?  Thanks, David.

    Just wanted to say that your understanding of Referenced and Managed now seems correct.  Managed Masters is a very good way to start with Aperture.  There is so much to learn, and a few tall conceptual hurdles to clear, that this administration decision can be safely postponed.  Aperture makes it easy to change any Image's Master from either status to the other.
    In the longer term, however, Referenced Masters are often a better set-up -- and become necessary for large Libraries.
    Note that there is no reason not to have a mix.  "Managed" and "Referenced" refer the status of each Image's Master.  I keep my personal Library on my laptop, and keep as Managed all recently imported Images and all portfolio Images.  This allows me complete adjustment, printing, and exporting of those Images whenever I have my computer.  All the other Masters are stored on an external drive at work.
    But note, too, that Referenced Masters are not backed up in Vaults.  If you use Vaults, you will have to back up your Referenced Masters using a method other than Aperture's Vault feature.

  • LR Star Ratings into iPhoto?

    I routinely export a (relatively small) portion of my LR catalog as jpgs and import those into iPhoto ('08) for online sharing, syncing with iPod touch and a few other reasons. LR keywords move over just fine but I'm not able to get the star ratings out of LR and into iPhoto. Is there a way to do that?

    As a work around, you could also add "onestar" "twostars" type keywords to the photos in LR so that you'd be able to call them up in iPhoto and apply the iPhoto stars en masse if you wanted.
    And, with iPhoto's smart folders, it should work pretty well.

  • What happened to star informatio​n on movies?

    First it was bad enough that FiOS doesn't supply any star ratings as they really can help in choosing movies, they now don't even include the names of stars in movies. Sometimes I'm not sure about a name of a movie but can identify it by who's in it, but now there's no longer star info, at least on my STB. Does anyone know anything about this and whether it's permanent? They have to know that this makes for a poor customer experience. Are they that clueless?
    Solved!
    Go to Solution.

    Part of me thinks that if you're recording something on your DVR -- you probably should already know that you want to watch it regardless of who's in it?!?   Of course, I have myself occasionally watching a show and wondering who a particular actor is when I can't place their name/face.   But then, I have internet and IMDB for that.   :-)

  • Is there somewhere that I can buy additional instant movie themes for Adobe Premiere Elements 12?

    Just wondering if there are any additional themes that are available to purchase and download for the program?  Thank you.

    LizzyLove
    As to your thread question..not that I have ever run into. You can customize the Adobe Instant Movies by creating an Instant Movie and then using the Break Apart Instant Movie at the Timeline level to do just that and modify that just created Instant Movie as wanted.
    There are no additional theme to purchase. And, the existing Instant Movie (Content Download type) for an Adobe design needs to be downloaded from within the program (See Instant Movie display of choices and thumbnail with blue ban at the top right corner of that thumbnail. Select Download Now (to obtain completed files for theme) or Download All (to obtain completed files for All Instant Movie theme choices).
    ATR

  • Nano star RATINGS not reflected in iTunes 7.4.1 (2) - manual sync

    Aloha,
    I rated several tunes while walking. I don't have enough room on my 4gb iPod to carry everything at once. I would like to temporarily remove those tunes that I have already rated and put some others on. I use the star ratings as my own personal way to sort by speed, favs, and junk.
    When I get back to my Mac, I know that the ones with 1 star are to be deleted - pau (pronounced pow! Pau is Hawaiian for done, did it, finished, no more).
    2 stars is slow, maybe no words
    3 is walking pace, can talk over, easy listening
    4 is dance, hike, pep up
    5 are personal fav's of a variety of speeds
    I want to have that ranking info sync up with the same songs that came from my library in the first place. Then I want to dump those and grab more music, or audiobook parts, or podcasts, whatevahs. This is the way I used to do it on my old FireWire iPod many versions of iTunes ago.
    I plan to continue to rate music as I have time and when I get back to my Mac that rating system allows me to put the music into playlists that I have essentially created on the fly.
    I can change my rating system at any time and wa-la I've got a new playlist.
    I'm open to other ways of accomplishing same onthego sorting principle. I've tried creating a playlist using iTunes, but the playlist is on my Nano and I cannot copy it or the files to a playlist on my Mac. . . . maybe I can export a playlist
    Oh, that was ugly - don't follow me! I imported the playlist into my library and I now appear to duplicates of every playlist related to music (and the two called 4star are both empty). Great (eSarcasm).

    First thing to get out of the way is ratings do not transfer from iPod to iTunes in manual syncing. Try using sync selected playlists mode. Then set up iPod to sync the playlists you want on iPod.

  • Instant-Movie - hung?

    I am making an instant movie.  I added 129 clips (mostly very short - 15-30 seconds).  It indicated that it was analyzing all of the files and now it is stuck (apparently) at 100% Analyzing Media for the last file.  When I check Task Manager the program is not hung and I see the hard drive flickering every so often.  It has been at this stage for about an hour or so.  This is not the fastest PC - Pentium 4 3.2 GHz w/2 GB RAM.  Is it possible it is still processing, and if so, is there some other way I can check to make sure it is not hung (such as tmp files changing or something)?  Thanks.

    Process Explorer is like task manager on steroids (so good that Microsoft bought the sysinternals company). If gives far more information about each process and you can drill down to get more info on those processes - this might give a better indication of whether or not PRE is still an active process.
    But ... it's not the utility I meant to recommend (oops!). I meant to recommend Process Monitor. "Process Monitor is an advanced monitoring tool for Windows that shows real-time file system, Registry and process/thread activity". i.e. you can see what it's reading and writing and therefore if PRE is still writing files. From the help file:
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Half star ratings in Windows 8.1?

    How do I enable half star ratings in iTunes in Windows 8.1?
    I know it has to be done through itunesprefs.xml but Windows 8.1 does not give you the option to go to C:\Users\<username>\appdata\roaming... to be able to locate the xml file in the first place.

    Hi,
    What's the secondary tunnel VPN? The Checkpoint VPN is a third-party product, about its issue, it's recommended you contact its official support.
    If you point to the Windows 8.1 built-in VPN, here I suggest you follow this guide to check your operation step by step:
    Set Up and Edit VPN Connections in Windows 8
    https://technet.microsoft.com/en-us/library/jj613767.aspx
    And troubleshoot its connection via this tutorial:
    Why am I having problems with my VPN connection?
    http://windows.microsoft.com/en-us/windows7/why-am-i-having-problems-with-my-vpn-connection
    Note: It's also applied to Windows 8.1.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How do I overcome the Failed Downloads for Instant Movies from the Adobe Server?

    I have a Windows 8.1 PC , Premiere Elements ver. 12, and I have a  dedicated DSL for computer only. In my best efforts, even when disabling  McAfee completely, I have had almost 4 days of frustration trying to  download an Instant Movie from the online content server. At times the  DL works, slowly, then it pauses, sometimes the DL reverses the count  and I lose 10mb and it resumes (I have never seen that before). Most  frustrating is when the DL is nearly complete and the message pops up  that I need to check my connection as the download has failed. I have  1.6TB disc space, and no restrictions in place at my end. I tried from 2  of the PCs, both Win 8.1. I have tried at all hours of the day for  traffic on the server, but that doesn't seem to matter. I have attempted the Secret Agent file DL at best 10x.  Is there a  setting I need to change to receive this content, or go to a different  site where I can directly access this content?
    I have purchased Three PE 12 programs for 3 replacement PCs and I need some real direction.
    Thank you, Jerry

    Jerry W B
    There will be those that report Content download of a few minutes. Although we are happy for them, many have found that this is not usually the case. Download of the Premiere Elements 11 and 12 Content download is often a slow process which demands a lot of patience whether the download be "Download Now" or "Download All".  Just two of the factors in this situation are the Internet Speed/Status and the status of the Adobe Server. Many times it is time of the day.
    http://www.atr935.blogspot.com/2013/05/pe11-no-content-disc-content-downloads.html
    http://atr935.blogspot.com/2013/12/pe12-content-download-considerations.html
    I have DSL Service on the east coast of the USA. It is now about 6 pm Saturday February 22, 2014.
    I right clicked the blue ban at the top right corner of the Instant Movie thumbnail for the Secret Agent theme. I selected Download Now to download just that one Instant Movie theme.
    a. The file size was given as 75.8 MB, not 118.7 MB. It took 11 minutes and 19 seconds to download that Instant Movie.
    I checked the download on two different computers, one Windows 7 64 bit and the other Windows 8.1 64 bit. The Instant Movie Secret Agent had a file size of 75.8 MB according to the download pop up in the opened project.
    b. If you are talking days for this download, then I would first check with your Internet provider. There is no other place for these downloads except from within the program. And, when you do get them, I would encourage you to save them as per my blog posts on this topic to avoid having to go through an labored downloading processes again.
    Do you find the downloading of Content to be the same for all the other categories requiring this type of download, not just Instant Movies?
    Please review and update us on your progress.
    Thank you.
    ATR
    Add On...Although you did say that you disabled McAfee, be advised that McAfee's recent update(s) have created some serious problems for Premiere Elements. So, I would re-evaluate McAfee's possible role in all this along with the firewalls settings.

  • Instant Movie Themes Download Error

    I have just upgraded to PE11 and have a series of jpg images in a PE file that I was trying to create as a slideshow.
    I have been using the expert view (although I cannot see that makes any difference) and thought I would try out the instant movie themes.
    The Pan and Zoom theme works fine, but I cannot get any of the other themes to work.   Selecting the theme and clicking the next button, PE11 shows the dialogue box in the attached image suggesting it is downloading content.   BUT, it never finishes and just cycles around the download with the blue bar filling, clearing and then starting again.   There is no error message, just a constant cycling of the blue bar.
    Has anyone else come across this?
    Thanks.

    As you can see, the program will download the other themes as needed. That's what it's trying to do in the illustration you provided.
    Have you registered the program and signed in with your Adobe ID?
    Do you have a good, reliable internet connection?
    If the answer to both of those questions is yes, you may have just caught the Adobe site offline. Try again. Depending on your internet speed, it can take a couple of minutes.

Maybe you are looking for