PREL8 locks up when closing

I'm running Priemier Elements 8.01 on Windows 7 64-bit.
Graphics card is a Nvidia GeForce 8400 GS, driver version 197.45
Whenever I open Premire Elements 8, I get a little Red X error in the bottom corner saying that my graphics card or driver may be operating incorectly. Also, whenever I try to close the program, it locks up. Not sometimes...but every time. I have to CTRL-Alt-Delete and force close through the task manager.
As far as I know, the driver I have is the latest driver for my card. I don't want to do a roll back until I know if that's what is really causing the problem.
Thanks.

I don't know.
Windows 7 is a very stable operating system -- but it's also relatively new and not all of the drivers are completely rock solid yet.
Nonetheless, even with the patch, Premiere Elements 7 seems particularly vulnerable to any instabilities in your operating system.
Sorry. I know that's not a solution. It's just some insight. Premiere Elements 8 and Windows 7 64-bit has been an uneasy marriage since last fall, unfortunately. We're all opening Win 7 SP1 fixes patches things up between them.

Similar Messages

  • Adobe Reader 8.1 locks up when closing a pdf

    Hello All,
    Have an odd problem.  If I open a pdf file ( with Adobe Reader 8.1) and close it, after about 30 seconds no other pdfs will open until I restart my browser.  As long as I keep the 1st pdf open, I can open as many additional ones as I want.
    With the initial pdf open I get the following when I do a ps -ef | grep read
    14924 14873  2 09:09 ?        00:00:01 /opt/Adobe/Reader8/Reader/intellinux/bin/acroread --display :0.0 -progressPipe 3 -exitPipe 4
    After closing out the pdf, 30 seconds later the same ps command yields this & thats where it stays until the browser restarts
    14924 14873  1 09:09 ?        00:00:02 [acroread] <defunct>
    running a top -n1 shows the single zombie process and as soon as the firefox browser is shut down, everything returns to normal.  Don't see any memory issues either.
    I believe my issue is the same as listed in the bug from open suse :
    https://bugzilla.novell.com/show_bug.cgi?id=363381
    How ever I cannot upgrade all of the clients to Suse 11.  Is there anything else i can do here to address my issue??
    Running
    Novell Linux Desktop 9 (i586)
    VERSION = 9
    RELEASE = 9
    firefox-3.0.17
    Adobe ver="8.1.7"

    Someone may give you and answer here, but you might have more luck in the Reader forum - this is not that forum. It really sounds like a Windows issue as you suggest, but I will let others address this.

  • I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image,

    I am using a Photoshop cs2, and I wonder if it is possible to keep the settings of the guidelines when closing an image, with the actual document ? It would be nice to have the guidelines locked down, I find it than when opening the same or another image, the guidelines are not locked, it is annoying to have to lock them down again. and it would actually be nice, to ba able to give specific directions when placing the guidelines. Thanks

    Then why are the guides unlocked when I reopen a document that I saved with the guides locked ?
    Thanks.

  • Cannot save open tabs when closing, instructions on "help", don't; FF4 has crashed/locked several times also. Frequently have to hit link button (or back button) twice for it to work. Had MUCH better performance from previous version (Windows 7 user)

    previous version asked if I wanted to save tabs when closing, not version 4. "Help" suggested checking setting but does NOT indicate what to check! (I cannot find any options/settings related to saving tabs upon closing). Second option was to rename two files, did so, did not allow saving tabs (just erased history). I liked saving tabs and am very frustrated by this.
    FF has crashed a couple of times, locked a couple of times (most recently I could not even stop with windows task manager, had to reboot)
    Frequently links (or "back" button) gives no response until pressed twice

    forgot to add that pages are generally much SLOWER to load with version 4 than previous version. NOT progress!

  • Phone Freezes up when Closing out multiple Apps in Multitasking toolbar.

    Hello World...umm.. I am not sure if anyone else is experiencing this but every since I have upgraded to os 4 on my 3G S... whenever I proceed to close apps out of my multitask toolbar after the 4th app closed in a row my phone COMPLETELY LOCKS UP! Unresponsive mode major. I hold the lock button to turn it off and nothing happens I keep pressing the home button and nothing happens. It just freezes in the toolbar but the apps are still wiggling? Anyone might have heard whats going on with this? I have to hold my lock button and home button to reset it and reboot to resume usage of my phone. Thanks...

    This happens to me also. I think it's a bug in the software
    It happened on my 3GS and also happens on my iPhone 4.
    It doesn't only happen when closing out of the 4th or 5th app, sometimes it happens to me on the first app or just at random times. It takes about 2 minutes for the phone to unfreeze, or you can simply restart it.
    Apple needs to fix this, and also recall these iPhone 4s because of the antenna issue they're refusing to accept.

  • 2.1 EA1: Deadlock when closing table

    Hi,
    I just closed a table's tab, and got a "Connecting to..." dialog which just kept on moving without apparent reason (there was still another open table on it's left side). When I tried to cancel it, the UI became unresponsive, so I asked for a dump:
    Full thread dump Java HotSpot(TM) Client VM (14.2-b01 mixed mode):
    "ProgressBarThread" prio=6 tid=0x04c2a800 nid=0xe08 waiting for monitor entry [0x0524f000]
       java.lang.Thread.State: BLOCKED (on object monitor)
            at java.awt.Component.setFont(Component.java:1777)
            - waiting to lock <0x131bb5e0> (a java.awt.Component$AWTTreeLock)
            at java.awt.Container.setFont(Container.java:1554)
            at javax.swing.JComponent.setFont(JComponent.java:2723)
            at javax.swing.table.DefaultTableCellRenderer.getTableCellRendererComponent(DefaultTableCellRenderer.java:210)
            at oracle.dbtools.logging.TableCellWithTooltip.getTableCellRendererComponent(TableCellWithTooltip.java:19)
            at javax.swing.JTable$AccessibleJTable.getAccessibleChild(JTable.java:7032)
            at javax.swing.JTable$AccessibleJTable.getAccessibleAt(JTable.java:7419)
            at javax.swing.JTable$AccessibleJTable.valueChanged(JTable.java:6932)
            at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:167)
            at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:147)
            at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:194)
            at javax.swing.DefaultListSelectionModel.insertIndexInterval(DefaultListSelectionModel.java:615)
            at javax.swing.JTable.tableRowsInserted(JTable.java:4468)
            at javax.swing.JTable.tableChanged(JTable.java:4404)
            at javax.swing.table.AbstractTableModel.fireTableChanged(AbstractTableModel.java:280)
            at javax.swing.table.AbstractTableModel.fireTableRowsInserted(AbstractTableModel.java:215)
            at javax.swing.table.DefaultTableModel.insertRow(DefaultTableModel.java:359)
            at javax.swing.table.DefaultTableModel.insertRow(DefaultTableModel.java:372)
            at oracle.dbtools.logging.LoggingPage.logMsg(LoggingPage.java:188)
            at oracle.ide.log.AbstractLogPage.log(AbstractLogPage.java:132)
            at oracle.dbtools.logging.LoggingPage.log(LoggingPage.java:194)
            at oracle.dbtools.logging.LogPaneHandler.publish(LogPaneHandler.java:80)
            - locked <0x1387bb68> (a java.lang.Object)
            at java.util.logging.Logger.log(Logger.java:458)
            at java.util.logging.Logger.doLog(Logger.java:480)
            at java.util.logging.Logger.log(Logger.java:524)
            at oracle.javatools.db.AbstractDBObjectProvider.suspendTimestampQueries(AbstractDBObjectProvider.java:943)
            - locked <0x16fcc7b0> (a java.util.HashSet)
            at oracle.javatools.db.DBUtil.suspendTimestampChecking(DBUtil.java:1464)
            at oracle.javatools.db.execute.StatementWrapper$ExecutionRunnable.run(StatementWrapper.java:687)
            - locked <0x10910318> (a oracle.javatools.db.execute.QueryWrapper$QueryExecutionRunnable)
            at oracle.ideimpl.db.ProgressBarExecutionWrapper.runAndLog(ProgressBarExecutionWrapper.java:136)
            at oracle.ideimpl.db.ProgressBarExecutionWrapper.access$000(ProgressBarExecutionWrapper.java:38)
            at oracle.ideimpl.db.ProgressBarExecutionWrapper$R.run(ProgressBarExecutionWrapper.java:180)
            at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
            at java.lang.Thread.run(Thread.java:619)
    "Background Parser" prio=6 tid=0x06669800 nid=0x3b4 waiting on condition [0x0773f000]
       java.lang.Thread.State: TIMED_WAITING (sleeping)
            at java.lang.Thread.sleep(Native Method)
            at oracle.dbtools.raptor.plsql.BackgroundParser$1.construct(BackgroundParser.java:111)
            at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
            at java.lang.Thread.run(Thread.java:619)
    "pool-2-thread-3" prio=6 tid=0x064b4800 nid=0xb00 waiting on condition [0x05a3f000]
       java.lang.Thread.State: WAITING (parking)
            at sun.misc.Unsafe.park(Native Method)
            - parking to wait for  <0x1648b528> (a java.util.concurrent.SynchronousQueue$TransferStack)
            at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
            at java.util.concurrent.SynchronousQueue$TransferStack.awaitFulfill(SynchronousQueue.java:422)
            at java.util.concurrent.SynchronousQueue$TransferStack.transfer(SynchronousQueue.java:323)
            at java.util.concurrent.SynchronousQueue.take(SynchronousQueue.java:857)
            at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:947)
            at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
            at java.lang.Thread.run(Thread.java:619)
    "WeakDataReference polling" prio=2 tid=0x06405400 nid=0xb78 in Object.wait() [0x0743f000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
            - locked <0x16d20930> (a java.lang.ref.ReferenceQueue$Lock)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
            at oracle.ide.util.WeakDataReference$Cleaner.run(WeakDataReference.java:88)
            at java.lang.Thread.run(Thread.java:619)
    "pool-4-thread-1" prio=6 tid=0x04da7400 nid=0xd18 waiting on condition [0x0733f000]
       java.lang.Thread.State: TIMED_WAITING (parking)
            at sun.misc.Unsafe.park(Native Method)
            - parking to wait for  <0x16d209c0> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
            at java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:198)
            at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.awaitNanos(AbstractQueuedSynchronizer.java:1963)
            at java.util.concurrent.DelayQueue.take(DelayQueue.java:164)
            at java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue.take(ScheduledThreadPoolExecutor.java:583)
            at java.util.concurrent.ScheduledThreadPoolExecutor$DelayedWorkQueue.take(ScheduledThreadPoolExecutor.java:576)
            at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:947)
            at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
            at java.lang.Thread.run(Thread.java:619)
    "Background Parser" prio=6 tid=0x04899800 nid=0x9c0 waiting on condition [0x0623f000]
       java.lang.Thread.State: TIMED_WAITING (sleeping)
            at java.lang.Thread.sleep(Native Method)
            at oracle.dbtools.raptor.plsql.BackgroundParser$1.construct(BackgroundParser.java:111)
            at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
            at java.lang.Thread.run(Thread.java:619)
    "IconOverlayTracker Timer" prio=6 tid=0x04d40400 nid=0xab4 in Object.wait() [0x07a3f000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.Object.wait(Object.java:485)
            at java.util.TimerThread.mainLoop(Timer.java:483)
            - locked <0x16c5f1a8> (a java.util.TaskQueue)
            at java.util.TimerThread.run(Timer.java:462)
    "BaseTreeExplorer.NodeOpeningExecutor" prio=6 tid=0x04d44400 nid=0x9d8 waiting on condition [0x0783f000]
       java.lang.Thread.State: WAITING (parking)
            at sun.misc.Unsafe.park(Native Method)
            - parking to wait for  <0x164a11e0> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
            at java.util.concurrent.locks.LockSupport.park(LockSupport.java:158)
            at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:1925)
            at java.util.concurrent.LinkedBlockingQueue.take(LinkedBlockingQueue.java:358)
            at java.util.concurrent.ThreadPoolExecutor.getTask(ThreadPoolExecutor.java:947)
            at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:907)
            at java.lang.Thread.run(Thread.java:619)
    "Scheduler" daemon prio=6 tid=0x06270c00 nid=0x144 in Object.wait() [0x0763f000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.Object.wait(Object.java:485)
            at oracle.dbtools.raptor.backgroundTask.TaskLinkedList.takeNextTask(TaskLinkedList.java:47)
            - locked <0x1648afa0> (a oracle.dbtools.raptor.backgroundTask.TaskLinkedList)
            at oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$SchedulerThread.run(RaptorTaskManager.java:419)
    "WaitCursor-Timer" prio=6 tid=0x062b7c00 nid=0x9e8 in Object.wait() [0x0753f000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.Object.wait(Object.java:485)
            at java.util.TimerThread.mainLoop(Timer.java:483)
            - locked <0x16477368> (a java.util.TaskQueue)
            at java.util.TimerThread.run(Timer.java:462)
    "Native Directory Watcher" prio=2 tid=0x04cd2400 nid=0xaf8 runnable [0x0603f000]
       java.lang.Thread.State: RUNNABLE
            at oracle.ide.natives.NativeHandler.enterWatcherThread(Native Method)
            at oracle.ide.natives.NativeHandler$2.run(NativeHandler.java:252)
            at java.lang.Thread.run(Thread.java:619)
    "Background Parser" prio=6 tid=0x04c81c00 nid=0xa64 waiting on condition [0x05f3f000]
       java.lang.Thread.State: TIMED_WAITING (sleeping)
            at java.lang.Thread.sleep(Native Method)
            at oracle.dbtools.raptor.plsql.BackgroundParser$1.construct(BackgroundParser.java:111)
            at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
            at java.lang.Thread.run(Thread.java:619)
    "Background Parser" prio=6 tid=0x04b61000 nid=0xfe0 waiting on condition [0x05e3f000]
       java.lang.Thread.State: TIMED_WAITING (sleeping)
            at java.lang.Thread.sleep(Native Method)
            at oracle.dbtools.raptor.plsql.BackgroundParser$1.construct(BackgroundParser.java:111)
            at oracle.dbtools.raptor.utils.NamedSwingWorker$2.run(NamedSwingWorker.java:115)
            at java.lang.Thread.run(Thread.java:619)
    "TextBufferScavenger" prio=6 tid=0x04ac7400 nid=0xfb0 in Object.wait() [0x05c3f000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            - waiting on <0x13c05430> (a java.lang.ref.ReferenceQueue$Lock)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
            - locked <0x13c05430> (a java.lang.ref.ReferenceQueue$Lock)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
            at oracle.ide.model.TextNode$FacadeBufferReference$PollingThread.run(TextNode.java:1949)
    "TimerQueue" daemon prio=6 tid=0x04a4b800 nid=0xf7c in Object.wait() [0x05b3f000]
       java.lang.Thread.State: TIMED_WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at javax.swing.TimerQueue.run(TimerQueue.java:236)
            - locked <0x139ca9a8> (a javax.swing.TimerQueue)
            at java.lang.Thread.run(Thread.java:619)
    "ChangeSetService" prio=2 tid=0x04b41400 nid=0xec0 in Object.wait() [0x0593f000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            - waiting on <0x137d0108> (a oracle.jdevimpl.vcs.changeset.ChangeSetService)
            at java.lang.Object.wait(Object.java:485)
            at oracle.jdevimpl.vcs.changeset.ChangeSetService.awaitEvents(ChangeSetService.java:178)
            - locked <0x137d0108> (a oracle.jdevimpl.vcs.changeset.ChangeSetService)
            at oracle.jdevimpl.vcs.changeset.ChangeSetService.eventLoop(ChangeSetService.java:199)
            at oracle.jdevimpl.vcs.changeset.ChangeSetService.access$200(ChangeSetService.java:56)
            at oracle.jdevimpl.vcs.changeset.ChangeSetService$2.run(ChangeSetService.java:138)
            at java.lang.Thread.run(Thread.java:619)
    "TimedCache-Timer" daemon prio=6 tid=0x02fab400 nid=0x220 in Object.wait() [0x045af000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.Object.wait(Object.java:485)
            at java.util.TimerThread.mainLoop(Timer.java:483)
            - locked <0x132359c8> (a java.util.TaskQueue)
            at java.util.TimerThread.run(Timer.java:462)
    "JarIndex Timer" daemon prio=6 tid=0x039c1800 nid=0xb10 in Object.wait() [0x03eaf000]
       java.lang.Thread.State: TIMED_WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.util.TimerThread.mainLoop(Timer.java:509)
            - locked <0x131b0db0> (a java.util.TaskQueue)
            at java.util.TimerThread.run(Timer.java:462)
    "AWT-EventQueue-0" prio=6 tid=0x03961400 nid=0xed4 waiting for monitor entry [0x03faf000]
       java.lang.Thread.State: BLOCKED (on object monitor)
            at oracle.dbtools.logging.LogPaneHandler.publish(LogPaneHandler.java:70)
            - waiting to lock <0x1387bb68> (a java.lang.Object)
            at java.util.logging.Logger.log(Logger.java:458)
            at java.util.logging.Logger.doLog(Logger.java:480)
            at java.util.logging.Logger.log(Logger.java:503)
            at java.util.logging.Logger.severe(Logger.java:990)
            at oracle.dbtools.raptor.utils.DBObject.getSchemaObject(DBObject.java:448)
            at oracle.dbtools.raptor.oviewer.xmleditor.XMLBasedEditor.updateContent(XMLBasedEditor.java:232)
            at oracle.dbtools.raptor.oviewer.base.ViewerEditor.whenDbNodeChanged(ViewerEditor.java:205)
            at oracle.dbtools.raptor.oviewer.base.ViewerEditor.whenVisibilityChanges(ViewerEditor.java:183)
            at oracle.dbtools.raptor.oviewer.base.ViewerEditor.editorShown(ViewerEditor.java:168)
            at oracle.ideimpl.editor.SplitPane.doLayoutTopTabs(SplitPane.java:857)
            at oracle.ideimpl.editor.SplitPane.doLayout(SplitPane.java:520)
            at java.awt.Container.validateTree(Container.java:1507)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validate(Container.java:1480)
            - locked <0x131bb5e0> (a java.awt.Component$AWTTreeLock)
            at javax.swing.RepaintManager.validateInvalidComponents(RepaintManager.java:670)
            at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:127)
            at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
            at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
            at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
            at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
            at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
            at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
            at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
            at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    "AWT-Windows" daemon prio=6 tid=0x0398c400 nid=0xe9c runnable [0x03daf000]
       java.lang.Thread.State: RUNNABLE
            at sun.awt.windows.WToolkit.eventLoop(Native Method)
            at sun.awt.windows.WToolkit.run(WToolkit.java:291)
            at java.lang.Thread.run(Thread.java:619)
    "AWT-Shutdown" prio=6 tid=0x0398b400 nid=0xeb8 in Object.wait() [0x03caf000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.Object.wait(Object.java:485)
            at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
            - locked <0x131b0f88> (a java.lang.Object)
            at java.lang.Thread.run(Thread.java:619)
    "Java2D Disposer" daemon prio=10 tid=0x0396e400 nid=0x3bc in Object.wait() [0x03baf000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
            - locked <0x131b1018> (a java.lang.ref.ReferenceQueue$Lock)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
            at sun.java2d.Disposer.run(Disposer.java:125)
            at java.lang.Thread.run(Thread.java:619)
    "Low Memory Detector" daemon prio=6 tid=0x02fa1800 nid=0x840 runnable [0x00000000]
       java.lang.Thread.State: RUNNABLE
    "CompilerThread0" daemon prio=10 tid=0x02f9bc00 nid=0xe58 waiting on condition [0x00000000]
       java.lang.Thread.State: RUNNABLE
    "Attach Listener" daemon prio=10 tid=0x02f9a400 nid=0xe28 runnable [0x00000000]
       java.lang.Thread.State: RUNNABLE
    "Signal Dispatcher" daemon prio=10 tid=0x02f99000 nid=0xe78 runnable [0x00000000]
       java.lang.Thread.State: RUNNABLE
    "Finalizer" daemon prio=8 tid=0x02f89c00 nid=0xe74 in Object.wait() [0x0330f000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:118)
            - locked <0x13140298> (a java.lang.ref.ReferenceQueue$Lock)
            at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:134)
            at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
    "Reference Handler" daemon prio=10 tid=0x02f85000 nid=0xa6c in Object.wait() [0x0320f000]
       java.lang.Thread.State: WAITING (on object monitor)
            at java.lang.Object.wait(Native Method)
            at java.lang.Object.wait(Object.java:485)
            at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:116)
            - locked <0x13140320> (a java.lang.ref.Reference$Lock)
    "main" prio=6 tid=0x00977800 nid=0xda0 waiting on condition [0x00000000]
       java.lang.Thread.State: RUNNABLE
    "VM Thread" prio=10 tid=0x02f81000 nid=0xe60 runnable
    "VM Periodic Task Thread" prio=10 tid=0x02fabc00 nid=0x448 waiting on condition
    JNI global references: 9421
    Found one Java-level deadlock:
    =============================
    "ProgressBarThread":
      waiting to lock monitor 0x02f87cc4 (object 0x131bb5e0, a java.awt.Component$AWTTreeLock),
      which is held by "AWT-EventQueue-0"
    "AWT-EventQueue-0":
      waiting to lock monitor 0x04d76584 (object 0x1387bb68, a java.lang.Object),
      which is held by "ProgressBarThread"
    Java stack information for the threads listed above:
    ===================================================
    "ProgressBarThread":
            at java.awt.Component.setFont(Component.java:1777)
            - waiting to lock <0x131bb5e0> (a java.awt.Component$AWTTreeLock)
            at java.awt.Container.setFont(Container.java:1554)
            at javax.swing.JComponent.setFont(JComponent.java:2723)
            at javax.swing.table.DefaultTableCellRenderer.getTableCellRendererComponent(DefaultTableCellRenderer.java:210)
            at oracle.dbtools.logging.TableCellWithTooltip.getTableCellRendererComponent(TableCellWithTooltip.java:19)
            at javax.swing.JTable$AccessibleJTable.getAccessibleChild(JTable.java:7032)
            at javax.swing.JTable$AccessibleJTable.getAccessibleAt(JTable.java:7419)
            at javax.swing.JTable$AccessibleJTable.valueChanged(JTable.java:6932)
            at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:167)
            at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:147)
            at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:194)
            at javax.swing.DefaultListSelectionModel.insertIndexInterval(DefaultListSelectionModel.java:615)
            at javax.swing.JTable.tableRowsInserted(JTable.java:4468)
            at javax.swing.JTable.tableChanged(JTable.java:4404)
            at javax.swing.table.AbstractTableModel.fireTableChanged(AbstractTableModel.java:280)
            at javax.swing.table.AbstractTableModel.fireTableRowsInserted(AbstractTableModel.java:215)
            at javax.swing.table.DefaultTableModel.insertRow(DefaultTableModel.java:359)
            at javax.swing.table.DefaultTableModel.insertRow(DefaultTableModel.java:372)
            at oracle.dbtools.logging.LoggingPage.logMsg(LoggingPage.java:188)
            at oracle.ide.log.AbstractLogPage.log(AbstractLogPage.java:132)
            at oracle.dbtools.logging.LoggingPage.log(LoggingPage.java:194)
            at oracle.dbtools.logging.LogPaneHandler.publish(LogPaneHandler.java:80)
            - locked <0x1387bb68> (a java.lang.Object)
            at java.util.logging.Logger.log(Logger.java:458)
            at java.util.logging.Logger.doLog(Logger.java:480)
            at java.util.logging.Logger.log(Logger.java:524)
            at oracle.javatools.db.AbstractDBObjectProvider.suspendTimestampQueries(AbstractDBObjectProvider.java:943)
            - locked <0x16fcc7b0> (a java.util.HashSet)
            at oracle.javatools.db.DBUtil.suspendTimestampChecking(DBUtil.java:1464)
            at oracle.javatools.db.execute.StatementWrapper$ExecutionRunnable.run(StatementWrapper.java:687)
            - locked <0x10910318> (a oracle.javatools.db.execute.QueryWrapper$QueryExecutionRunnable)
            at oracle.ideimpl.db.ProgressBarExecutionWrapper.runAndLog(ProgressBarExecutionWrapper.java:136)
            at oracle.ideimpl.db.ProgressBarExecutionWrapper.access$000(ProgressBarExecutionWrapper.java:38)
            at oracle.ideimpl.db.ProgressBarExecutionWrapper$R.run(ProgressBarExecutionWrapper.java:180)
            at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
            at java.lang.Thread.run(Thread.java:619)
    "AWT-EventQueue-0":
            at oracle.dbtools.logging.LogPaneHandler.publish(LogPaneHandler.java:70)
            - waiting to lock <0x1387bb68> (a java.lang.Object)
            at java.util.logging.Logger.log(Logger.java:458)
            at java.util.logging.Logger.doLog(Logger.java:480)
            at java.util.logging.Logger.log(Logger.java:503)
            at java.util.logging.Logger.severe(Logger.java:990)
            at oracle.dbtools.raptor.utils.DBObject.getSchemaObject(DBObject.java:448)
            at oracle.dbtools.raptor.oviewer.xmleditor.XMLBasedEditor.updateContent(XMLBasedEditor.java:232)
            at oracle.dbtools.raptor.oviewer.base.ViewerEditor.whenDbNodeChanged(ViewerEditor.java:205)
            at oracle.dbtools.raptor.oviewer.base.ViewerEditor.whenVisibilityChanges(ViewerEditor.java:183)
            at oracle.dbtools.raptor.oviewer.base.ViewerEditor.editorShown(ViewerEditor.java:168)
            at oracle.ideimpl.editor.SplitPane.doLayoutTopTabs(SplitPane.java:857)
            at oracle.ideimpl.editor.SplitPane.doLayout(SplitPane.java:520)
            at java.awt.Container.validateTree(Container.java:1507)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validateTree(Container.java:1513)
            at java.awt.Container.validate(Container.java:1480)
            - locked <0x131bb5e0> (a java.awt.Component$AWTTreeLock)
            at javax.swing.RepaintManager.validateInvalidComponents(RepaintManager.java:670)
            at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:127)
            at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
            at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
            at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
            at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
            at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
            at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
            at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
            at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
    Found 1 deadlock.
    Heap
    def new generation   total 9216K, used 8189K [0x10010000, 0x10a00000, 0x13140000)
      eden space 8256K,  94% used [0x10010000, 0x107b85c0, 0x10820000)
      from space 960K,  36% used [0x10910000, 0x10966e40, 0x10a00000)
      to   space 960K,   0% used [0x10820000, 0x10820000, 0x10910000)
    tenured generation   total 121024K, used 71944K [0x13140000, 0x1a770000, 0x38010000)
       the space 121024K,  59% used [0x13140000, 0x17782230, 0x17782400, 0x1a770000)
    compacting perm gen  total 52736K, used 52717K [0x38010000, 0x3b390000, 0x40010000)
       the space 52736K,  99% used [0x38010000, 0x3b38b500, 0x3b38b600, 0x3b390000)
    No shared spaces configured.Hope that helps,
    K.
    WinXP SP3, JDK 1.6.0_16, Oracle 10.2.0.2.0

    I have canceled the "Connecting to ..." dialog many a times and things were normal.
    It takes special skills to do the cancel in those special split seconds !!
    Logged Bug 9063158: EA1: OTNFORUM: DEADLOCK WHEN CLOSING TABLE
    -Raghu

  • TS3694 Ipad  locked up when doing iOS upgrade .  Screen shows iTunes logo and connector    . Any suggestions on how to reboot/ restart

    iPad locks up when doing iOS upgrade. Screen shows iTunes icon and connector. System will not power up or restart. Any ideas?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • Error message when Closing PS CS6

    I keep receiving a error message when closing PS CS6 which says "Adobe Media Core CS6 has stopped working"
    What can I do to resolve this issue?
    I'm running Windows Vista professional

    If you want help you may have to provide some more information … and a Forum- or web-search might also be worth trying.
    http://forums.adobe.com/message/4509053
    http://forums.adobe.com/thread/1025148
    http://forums.adobe.com/message/4495683

  • Lock tables when load data

    Are there any way to lock tables when i insert data with SQL*Loader? or oracle do it for me automatically??
    how can i do this?
    Thanks a lot for your help

    Are there any problem if in the middle of my load (and commits) an user update o query data ?The only problem that I see is that you may run short of undo space (rollback segment space) if your undo space is limited and the user is running a long SELECT query for example: but this problem would only trigger ORA-1555 for the SELECT query or (less likely since you have several COMMIT) ORA-16XX because load transaction would not find enough undo space.
    Data is not visible to other sessions, unless, the session which is loading data, commits it. That's the way Oracle handle the read committed isolation level for transaction.
    See http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96524/c21cnsis.htm#2689
    Or what happens if when i want to insert data someone has busy the table?You will get blocked if you try to insert data that has the same primary key as a row being inserted by a concurrent transaction.

  • Lock Code when turn on - 5800XM

    When I had v40 I had to tenter the Lock Code when I turned the phone on (something I did rarely so no problem).
    When I updated to v50 it doesn't ask for the Lock Code now. Any one know how I can set this to happen please?
    Mark

    I tried to paste something from the extended user manual, but it looked weird on the screen, so I've tried to make it look sensible.  I hope the following does the job:
    Select Menu > Settings and Phone > Phone mgmt. > Phone and SIM card. PIN code request — When active, the code is requested
    each time the device is switched on.

  • PSU causing lock ups when gaming? K9A2 Platinum

    I am having black screen and occasionally grey screen lock ups when Im playing games. It can happen within 10 minutes or up to an hour. I have to press the power button to restart and dont get any windows errors or blue screen. I have no issues when watching videos or just tooling around. My PSU is a OCZ600MXSP and Im thinking its not up to spec. I have everything running stock. Is it likely my PSU doesnt cut it or is the black/grey screen freeze thing an cpu/gpu overheating issue?

    All of my drivers are up to date (I do use driver sweeper as well). It happens pretty much in all games, from BFBC2 and TF2 to some crappy kid game my son plays online (Wizard 101?). Im not sure what the temps are under load but at idle they are good (cant recall what exactly they were but were in the proper temp range). My monitor has just finally died as Im typing this on my laptop (bad caps on power board  ) so Ill test the temps while gaming when I can hook it up to my big LCD.
    Could the lock up with no blue screen/error report indicate a component overheating?

  • Lock-up when opening file

    I have a problem with dreamweaver locking up when I open a
    file. The index file, other files open up fine. I am thinking I
    need to delete the preference files but don't know how to do this.
    Can someone help me on this?

    If it's just that one file and dw works normally on other
    files- then it is
    probably what's IN that file that is causing the problem.
    url address of the uploaded problem file?
    > I have a problem with dreamweaver locking up when I open
    a file. The index
    > file, other files open up fine. I am thinking I need to
    delete the preference
    > files but don't know how to do this. Can someone help me
    on this?

  • Windows always shows lock screen when idle, ignores setting

    On Windows 8, I had my computer set up so that the screen would turn off after a period of inactivity. When I would move the mouse or press a key, it would resume without asking me to log in. After upgrading to Windows 8.1, it is now always showing me the
    lock screen when resuming from idle. In the lock screen settings, I found a new option named "When my PC is inactive, show the locks screen instead of turning off the screen". I have disabled this setting, but my computer still locks every time the
    screen turns off.
    How can I get my computer to stop locking when it is idle?

    Hi,
    What about the settings in Screen Saver? Please check the Option "On resume, display logon screen" is unchecked.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • 2nd iPod Classic locking up when connecting to MacBook Pro

    I'll sum up the lead-in story as best I can.
    I have a 2010 MacBook Pro 13". Just got an new iPod Classic a couple weeks back. I discovered that when playing the iQuiz game, I had a few lock-ups (freezing). Then a handful of times, it locked up when connecting it to the MacBook for charging or syncing. It didn't lock up EVERY time. But about 1 out of every 4 syncs on average.
    I naturally thought something was wrong with the Classic, and brought it into the Apple store when it was locked up, and they gave me a new one.
    But now this one is doing the same thing. Occasional lock-ups when connecting to the MacBook Pro. Doesn't matter which USB port. And doesn't seem to matter if the computer has been on, or if it's a fresh boot.
    What could be going on here? I doubt highly that both Classics I've gotten have the same exact issue with occasional lock-ups when connected to the computer. My MBP otherwise has given me no problems. And no problems with other USB devices, ever.
    Any ideas?

    Update: bought a new usb sync cable to try, and no change. the Classic locked up the first try with the new cable.

  • I lose the connection when closing the CMD

    Hi guys,
    I have configured a standalone listener as following:
    C:\Program Files (x86)\Java\jre6\bin> java -Dapex.home=D:\list -Dapex.images=C:\images -jar D:\apex.war
    Afterward,
    If I close the CMD, I will lose the connection, and I have to reconfigure it again.
    If I open APEX locally , I mean by using the shortcut "Get Started With Oracle Database 11g Express Edition" , Then I will lose the connection that uses the default port of the listener, that is 8080.
    After I configured the listener I got this message on the CMD
    -- listing properties --
    PropertyCheckInterval=60
    ValidateConnection=true
    MinLimit=1
    MaxLimit=10
    InitialLimit=3
    AbandonedConnectionTimeout=900
    MaxStatementsLimit=10
    InactivityTimeout=1800
    MaxConnectionReuseCount=1000
    APEX Listener version : 1.1.2.131.15.23
    APEX Listener server info: Grizzly/1.9.18-o
    May 21, 2011 5:14:41 PM com.sun.grizzly.Controller logVersion
    INFO: Starting Grizzly Framework 1.9.18-o - Sat May 21 17:14:41 GST 2011
    INFO: http://localhost:8080/apex started.
    Using JDBC driver: Oracle JDBC driver version: 11.2.0.2.0
    Regards,

    Hi,
    I'm not sure I got your question right, but I'll try to find some solution anyway.
    If I close the CMD, I will lose the connection, and I have to reconfigure it again.That's what happens when a shell is terminated - all associated processes will stop as well. However, if you have a apex-config.xml in your apex.home you shouldn't need to configure your APEX Listener each time your start it, but it would reuse an existing configuration.
    If I open APEX locally , I mean by using the shortcut "Get Started With Oracle Database 11g Express Edition" , Then I will lose the connection that uses the default port of the listener, that is 8080.Now, if you have XE running on the same (local) machine as you have your APEX Listener running in standalone mode, you probably have a port conflict: By default, both APEX Listener in standalone mode and the Embedded PL/SQL Gateway (EPG) use port 8080. The EPG is activated as web server for APEX in XE after a fresh installation, the APEX Listener would be an alternative in that case. You can either stop the EPG, or reconfigure any of the two web servers to use a different port, if you want to run them parallel.
    To change the port used by the APEX Listener in standalone mode, you simply add another parameter to the startup: -Dapex.port=8888 and you're done.
    To change the port used by the EPG, connect as sys and run the following
    EXEC DBMS_XDB.SETHTTPPORT(8888);
    COMMIT;If you want to disable the EPG, simply set the port to *0* .
    After I configured the listener I got this message on the CMDThat's what it should look like.
    No, since your topic is "lose the connection when closing the CMD", I assume you search for an alternative. You could run the APEX Listener as a Windows service, even in standalone mode. To do this, you create a batch file, e.g.
    %JAVA_HOME%\java -Dapex.home=D:\oracle\APEX_Listener\_home -Dapex.images=D:\oracle\apex_4_0_2\images -Dapex.port=8888 -jar D:\oracle\APEX_Listener\apex_listener.1.1.2.131.15.23\apex.war >>D:\oracle\APEX_Listener\apex_listener.1.1.2.131.15.23\my_apex_listener.log 2>&1Note that you have to set JAVA_HOME as system property or replace the call with the absolute path to your JDK or make sure the JDK is in your PATH variable.
    Of course, you can and should change the other directories as well to fit to your system.
    Next, create a Windows service, e.g. using [url https://iain.cx/src/nssm/]NSSM (free) or [url http://support.microsoft.com/kb/137890]SRVANY (MS, non-free), that starts your batch as a windows service.
    The command for creating that service using NSSM could look as follows
    nssm install APEX_Listener D:\oracle\APEX_Listener\apex_listener.1.1.2.131.15.23\startup.cmdYou can edit the service properties afterwards, e.g. change the start mode from "Automatic" to "On Demand".
    I hope this answers your question. If not, please point me into the right direction.
    Thanks,
    Udo

Maybe you are looking for

  • Finder keeps crashing (and restarting)

    I recently installed StuffIt 11 and Toast 8 around pretty much the same time. Ever since, I find that Finder keeps crashing whenever I am trying to do something using the right click context menu (i.e. move to trash or open with etc) I had a look at

  • Steps to create a logical system for client 001.

    Hi, In client 000 go to transaction scc4. There you create your new client for sap netweaver abap trial version for BI? Here, can you give me steps to create a logical system with client 001 using tcode scc4. Thanks, Kannan

  • DIRADMIN account not working anymore

    I have seen many other posts related to this issue, and I have tried all the suggestions I have seen. I can't log into Workgroup Manager as diradmin and can't re-kerberize my domain as it doesn't take the diradmin account and password in slapconfig.

  • Sound out of iTunes is "Warbling"

    Today, when I opened iTunes to listen to radio, the sound coming out of it was "warbling", like every tone is repeated once. I was running 5.0.1, so the first thing I did was update to 6.0.1, but the same thing was still happening. When I open Window

  • Illustrator CC 2014, nothing happens

    I just installed illustrator cc 2014 trail version, started with a fresh screen, clicked on join tool, pencil tool and nothing happens...please helps!!!