Preload full FLV file with a preloading elements
I have a client that would like for the full flv movie to be preloaded to the end before it starts to play also they would like to some sort of preloader.
I can do this with a normal swf however I don't know where to begin with something like this.
I would like to use the FLVPlayback component if possible.
Thanks for any suggestions or help,
Chris
I don't know that you can connect more than a single iPod at one time to a computer. I seem to recall you can not.
As to preloading the video, if you set each Nano to manual updating, then the video will stay on the iPod when they plug it in. But if they change their setting for the Nano to Auto, it will then be removed.
How big is the video? One option is to ALSO load it into the drive portion of the iPod (when you set to Manual or set to Enable Disk mode) the Nano will show up as a drive on your computer. You can load any files in there you want like any other computer drive. If the clients change their iPod to auto updating, the version on the "player" section (the playable on the iPod part) will be removed, but the video would still exist in the Nano on the drive area. They could move it from the drive of the Nano and populate it into their own iTunes library if they wanted to sync the video back to the "player" part of the iPod to view on the iPod.
Patrick
Similar Messages
-
Swapping .FLV files with Spry
I'm trying to make an HTML page using Spry to play videos
with the Spry element of the page pulling in a Title, Description
and filename {clip} from an XML file. So when you click on the
Title/Description it replaces the current .flv file with the next
file {clip}.
This is all working well in any browser except IE so I
thought it must need the AC_FL_RunContent script added.
Unfortunately when I add this script the first movie in the
playlist plays but now all the other elements from the page are
lost.
It's obviously something to do with the RunContent script,
but does anyone know what exactly?
Also any other suggestions on how I could make this page (I'm
desparate to start using the new features in Dreamweaver though -
hence the XML element).
ThanksI just found the problem. Even though my Perian SAID it was up to date, it was only at 1.1.1. My old system that worked correctly still had Perian 1.1.3. I copied that component over and it works fine with the problematic FLV files.
Find it at:
(user folder):Library:QuickTime:Perian.component -
Flash Player for FLV files with alpha channel encoded
My goal is to play the the transparent background flash video on the bottom right hand corner similar to the video on this website : http://www.dropshipblueprint.com/
I already have the FLV file with alpha channel encoded. I was made to understand I will need a special flash player that can read alpha channel in the flv file to make the background transparent? Is this correct? If yes, then how to accomplish this or where do I get that player, maybe opensourece player? If the player is not a solution then how do I accomplish my end objective taking into consideration I have the FLV file with the alpha channel encoded. Thanks for your help. SamSam,
Welcome to the forum.
Where do you need to play this "sprite" (the name for such a Flash video)?
If you need to add that to a Video, then there could be a few challenges in PrE.
If you need to add it to a Web site, then Flash Player (free from Adobe) should be able to display that.
Can you please give us just a bit more info, on how you wish to use the sprite?
Good luck,
Hunt -
Urgent.
I have been not approved of this error
been back and forth with Apple
The title of the Table of Contents in portrait view is placeholder text : Book Title. Please redeliver your corrected full book file with a custom preview file. The book will not go live in the store without a matching custom preview file."
1st, how do you clarify the Table of Contents issue. No idea what I am doing wrong
2nd what is a customr preview file? I uploaded a sample book already.
Please advise ASAP
my email: [email protected]
thanksI double check my table of content and I do not have a place holder... so I don't understand the error.
-
High CPU usage when playing flv files with flash
As more and more FLV videos are moving to HD, I'm noticing
high CPU usage and lots of dropped frames when playing FLV video in
web browser with Flash 10. This is true even if the video isn't
full screen. I've tried a variety of browsers (Firefox, I.E.,
Chrome) and the problem occurs on all of them so it's pretty clear
it's a limitation in Flash.
Now my PC isn't high end (it has a Pentium M 1.86 GHz
processor), but I can take those same FLV files and load them in
something like Media Player Classic or Windows Media Player (when
using ffdshow) and play the FLV files full screen with little or no
drop in frames and an acceptable CPU rate.
This is especially annoying on sites like YouTube where I
actually have to save the video and play it back in something other
than Flash to have it play back at an acceptable rate. This doesn't
work for other sites like Amazon.
Why is the CPU usage so high when decoding and displaying
videos when compared to other media players?I've been doing research about this excessively high CPU usage problem (100%!) for weeks because I have also experienced it with my vista home premium laptop. Just recently, I have finally found the solution. The problem is not your browser or your OS or your pc's memory. The problem is caused by authorization for flash player.
Read the link (posted below) carefully and follow the steps accordingly. If you have already done steps 1 through 6 with your computer, you can go straight to step 7.
http://thetechangel.com/blogberry/2008/10/adobe-flash-player-10-fix-for-vista-xp/
PS: I am not the author of that link, so please thank the respective site owner if you find the procedure very helpful.
Please let me know also if the link solves your problem. I am sharing this because Adobe seems unable to provide solutions to this, and I don't want to hear people suffer.
My blog:
http://literaryworks101.blogspot.com
http://bookofsalamat.blogspot.com
Thanks -
How do I replay a FLV file with flvPlayback AS3
Hey Everyone.
Pretty new to Flash and AS3- so I apologize in advance if my terminology is all wacked out. I've researched this topic for the better part of a day and cannot find my solution.
I've got a .flv file uploaded on my server that plays just fine. I created the video in Apple Motion, exported out a .MOV reformatted it using Adobe Media Encoder. Imported into Flash using the import video menu command. I ended up with a .swf and a .flv. I upload both to my server, built a webpage and use the swf to play the .flv.
Anyway. Everything plays. I need a button that a viewer can push and replay the video once it stops.
I can create shapes in flash and can turn them into buttons. Easy enough. Seems like I need to create a script to go with that frame in the timeline?
I keep reading about creating a listener and an event? But it's confusing finding answer because the is no clarification whether people are using AS2 or AS3 and I feel like I'm just chasing my tail.
Can anyone point me to a tutorial or help me out? Any advice is appreciated.
You can see the video here.
http://www.evisland.com/Pages/How_It_Works.htmlWhat you need to do is
1 drag the movie to the stage.
2 give frame 1 a lable of "frame1" You can do this by clicking on frame one, then in the property inspector there is a field labled frame lable.
3 Go to the last frame and make a play button. Give the button an instance name of "player"
4 here is the event listener code that will activate when the "player" button is clicked. It will go back to frame 1 and play.
To Clarify this is Action Script 3
stop();
player.addEventListener(MouseEvent.CLICK,startOver);
function startOver(event:MouseEvent)
gotoAndPlay("frame1");
Thats all. -
Any FLV files with Nellymoser audio are required
Hi,
I'm writing a converter of FLV with Nellymoser audio into MP3
format.
I've tested it with NM audio of 8 kHz, but I need yet to test
it with
audio of higher sampling rates (like 11 kHz, 22 kHz and 44
kHz).
Could anybody help me with a small sample of FLV file,
encoded with
Nellymoser audio with a sampling rate higher than 8 kHz?
Thanks in advance.I just found the problem. Even though my Perian SAID it was up to date, it was only at 1.1.1. My old system that worked correctly still had Perian 1.1.3. I copied that component over and it works fine with the problematic FLV files.
Find it at:
(user folder):Library:QuickTime:Perian.component -
Any FLV files with Nellymoser audio is required
Hi,
I'm writing a converter of FLV with Nellymoser audio into MP3
format.
I've tested it with NM audio of 8 kHz, but I need yet to test
it with
audio of higher sampling rates (like 11 kHz, 22 kHz and 44
kHz).
Could anybody help me with a small sample of FLV file,
encoded with
Nellymoser audio with a sampling rate higher than 8 kHz?
Thanks in advance.I just found the problem. Even though my Perian SAID it was up to date, it was only at 1.1.1. My old system that worked correctly still had Perian 1.1.3. I copied that component over and it works fine with the problematic FLV files.
Find it at:
(user folder):Library:QuickTime:Perian.component -
Using FLV files with media playback components
I can import an mpeg video to flash and export the movie as a
.swf for use on the web. However, I'd like to learn how to use the
components, and I must say the documentation is extremely
confusing. Anyway, it appears I need a .flv file to use them. I
have the flash video exporter, but I don't know how to use it. I
tried opening the mpeg in quicktime, but it won't play (I don't
have quicktime pro, if that's the problem). Can I use the flash
video exporter in Windows Media Player? Why is this so difficult?
Is there an easy way for me to put a nice little movie controller
on my .swf movie? That's all I really want.
thanks!My solution may not be the most technical but it works. We use a combination of iWeb, dreamweaver and straight code on our site. We lay a graphic in where the flash is going to go then we replace the code with the flash player. You have to make sure the flash is in a div and is identified as a object.
http://www.them-us.com/SVint.html
http://www.them-us.com/Reality.html -
HT3775 Using .flv files with iBooks Author
Hi
Does anybody know how to convert .flv files to work within iBooks Author?
Thanks
Julian DMy solution may not be the most technical but it works. We use a combination of iWeb, dreamweaver and straight code on our site. We lay a graphic in where the flash is going to go then we replace the code with the flash player. You have to make sure the flash is in a div and is identified as a object.
http://www.them-us.com/SVint.html
http://www.them-us.com/Reality.html -
How to replace Adobe Flash media player for flv files with GOM player?
By default, Firefox opens Adobe Flash for flv files. Flv files aren't listed in my application page. How can I swap Flash for GOM or another player?
Sam,
Welcome to the forum.
Where do you need to play this "sprite" (the name for such a Flash video)?
If you need to add that to a Video, then there could be a few challenges in PrE.
If you need to add it to a Web site, then Flash Player (free from Adobe) should be able to display that.
Can you please give us just a bit more info, on how you wish to use the sprite?
Good luck,
Hunt -
How to play flv-files with Flashplayer
Hello,
I encoded avi's getting flash 8 flv's; I used Adobe Première Pro CS3 and Adobe Flash Encoder as well.
I would like to play these flv's with Flashplayer 8; how should I proceed?
With the VLC-player 0-8-6c the flv's are displayed nicely.
Thank you very much,
MarcFlash video is played in a browser with the Flash plug-in installed. The video needs to be authored in Flash where a player interface is created. The video is either embedded in a web page or linked to the page. The player interface is downloaded with the video from the host.
-
Windows Vista Home Premium SP2, Firefox 3.16, Adobe Flashplayer 10.2.153.1
Thanks. I was clicking on a .flv file thinkin that I needed to download it from Khan Academy, however, that was not necessary. All I had to do was click on the forward arrow appearing above the download location to actually play the video. I now understand how to play the videos.
Thanks again. -
High CPU usage when playing flv files with VideoDisplay
Hi all,
Now i develop a project with VideoDisplay, my problem is when i play f4v file, my CPU usage is very high.., I also play the same file with Adobe Media Player, the problem is still exist.
Can anybody help me ~? thanks~,and sorry for my poor english~I'm pretty sure one reason is that Flash "watches" the video so it can sync up the frames with other animations you might want to overlay.
Alex Harui
Flex SDK Developer
Adobe Systems Inc.
Blog: http://blogs.adobe.com/aharui -
How to create java classes when multiple xsd files with same root element
Hi,
I got below error
12/08/09 16:26:38 BST: [ERROR] Error while parsing schema(s).Location []. 'resultClass' is already defined
12/08/09 16:26:38 BST: [ERROR] Error while parsing schema(s).Location []. (related to above error) the first definition appears here
12/08/09 16:26:38 BST: Build errors for viafrance; org.apache.maven.lifecycle.LifecycleExecutionException: Internal error in the plugin manager executing goal 'org.jvnet.jaxb2.maven2:maven-jaxb2-plugin:0.7.1:generate': Mojo execution failed.
I tried genarate java classes from multiple xsd files, but getting above error, here in .xsd file i have the <xe: element="resultClass"> in all .xsd files.
So I removed all .xsd files accept one, now genarated java classes correctly. but i want to genarte the java classes with diffrent names with out changing .xsd
Can you please tell me any one how to resolve this one......
regards
prasad.nadendlaGregory:
If you want to upload several Java classes in one script the solution is .sql file, for example:
set define ?
create or replace and compile java source named "my.Sleep" as
package my;
import java.lang.Thread;
public class Sleep {
public static void main(String []args) throws java.lang.InterruptedException {
if (args != null && args.length>0) {
int s = Integer.parseInt(args[0]);
Thread.sleep(s*1000);
} else
Thread.sleep(1000);
create or replace and compile java source named "my.App" as
package my;
public class App {
public static void main(String []args) throws java.lang.InterruptedException {
System.out.println(args[0]);
exit
Then the .sql file can be parsed using the SQLPlus, JDeveloper or SQLDeveloper tools.
HTH, Marcelo.
Maybe you are looking for
-
I can't do anything between the computer and the iPod... cannot sync purchases, music, anything... I tried resetting my iPod, which was a HUGE mistake because now, none of my music is on it and I can't sync the thousands of songs I've purchased to it
-
Hi all! I was trying to download my pictures from my iphone to my MAC for storage so that I can erase them off my iphone but could not find an easy was to do this? The whole sync operation seems cumbersome and only allows you to upload photos from yo
-
Placing Google Map with CS5 [subject edited by moderator]
I have dreamweaver CS5 and want to know how to embed a google map image please. I have successfully placed a link to the map, but not the image of the map.
-
Charged a large amount $68 by iTunes California . I can't get to anyone in support and when I challenged the amount on my card, now my Apple ID has been disabled. Anyone else having similar problems?
-
DB connection pooling to remote server, pls help!
Hi guys, I really need help with this and I am not exactly the most experienced developer. I have a java application which connects to a remote MS SQL server using the connection pooling object model described in Sun docs at: http://java.sun.com/deve