Preload wont upgrade because of existing preload files...

:: Retrieving packages from community...
preload-0.6.3-1 28.2K 35.5K/s 00:00:01 [#########################################] 100%
checking package integrity...
(1/1) checking for file conflicts [#########################################] 100%
error: could not prepare transaction
error: failed to commit transaction (conflicting files)
preload: /var/lib/preload/preload.state exists in filesystem
preload: /var/log/preload.log exists in filesystem
I'm guessing I should just delete those files, but why can't the updated preload just use those files?

Delete /var/lib/preload/preload.state and /var/log/preload.log.  Then you should be able to install.

Similar Messages

  • I upgraded because they said my files were too big but I've emailed files a lot prior.  now after the upgrade I have a completed file to emial to someone, enter all the data, and there is no "SEND" button.  how do i send these files and why isnt it just l

    I have often sent pdf or other files with adobe by email with no problem.
    this file it said was too big so I'd have to upgrade to send it.   so I upgraded it.  I followed all the instructions, email, etc, etc, and its' ready to go but there is no SEND button.  how do I sent my file?

    Are you still experiencing a problem with Adobe Send?  We inadvertently introduced a problem earlier today (now fixed), but you reported your issue was last night.
    Anyway, can you check again?

  • I am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

    i am trying to upgrade to yosemite (for imac) from version 10.6.8 but even though i have 70gb available on my hard drive it wont let me upgrade because it says i dont have enough memory!! what can i do??

    Install more RAM in the computer; the Mac needs to have at least 2GB of RAM and should have 4GB or more first.
    (125734)

  • Is the IOS5 upgrade for iphone 3G because mine says it is up to date and wont upgrade to IOS 5

    is the IOS5 upgrade for iphone 3G because mine says it is up to date and wont upgrade to IOS 5

    This is all true.
    The iphone 3G can only be updated to 4.2.1.  It will not support any version higher than that.

  • HT201210 My iphone will not upgrade because "a backup file is corrupt".  How do I fix this?

    My iphone will not upgrade because "backup file is corrupt"  how do I fix this?

    Turn everthing off and back on and start over, this happened to mine and that,s what i did and it worked.

  • How to delete existing templates -- because they override DW files

    I can't figure out how to crreate a new BC site and delete all the existing template files.
    Some I can. Others override the Dreamweaver files that I try to upload.

    I didn't want any BC templates. And I don't have one in DW to replace BC default one with.
    The BC CSS Style sheet defintiely overrides DW style sheets. Here's what I'm talking about after I delete lots of BC CSS files:
    http://ms-welcomemat.businesscatalyst.com/
    I can't delete this, this is from BC template:
    My Website
    Home
    About Us
    Contact
    Menu
    Home
    About Us
    Contact

  • Itunes wont work because of quicktime or something?

    ok
    well heres the deal
    itunes was working fine for me
    until one day i decided to upgrade cause it said i should
    from then on
    now it wont open because it says i need a high version of quicktime. it says i have quicktime 6.5 i and i need 7.0
    however
    everytime i try to download quicktime 7.0
    it still doesnt open
    what am i doin wrong?

    hi Connie!
    how do u kno if u have a k lite mega code pack?
    hmm. i think it's something you need to install, so if you don't know you have it, you probably don't have it.
    let's try this again, using a QT 7.0.3 standalone installer this time.
    first use the QT part of the uninstall instructions given here to get rid of that existing QT you have:
    http://docs.info.apple.com/article.html?artnum=93976
    after you do that, download the Windows Installer Cleanup utility and use it to check if you still have an entry for Quicktime. if so, remove it:
    http://support.microsoft.com/kb/290301/
    then download the standalone QT 7.0.3. save it to your hard drive (we'll run the installation from there rather than online). again, switch off any antivirus and antispyware prior to the install:
    http://www.apple.com/quicktime/download/standalone.html
    reboot after that install. will itunes run properly now?
    love, b

  • How to get data from an existing Excel file using report generation toolkit

    I'm trying to use the Excel Get Data vi from the report generation toolkit, but i can't figure out how to turn a browsable path into the right type for the VI.  I've tried using the New Report.vi, but that doesn't work unless you use a template.  It won't open an existing excel file and make it an open report to pull data from.
    Essentially, i have a bunch of excel files that have data in them and i want to use a VI to analyze the data.  So, i'm trying to pull in all the data directly from the excel file so i don't have to reproscess them all into text so i can use the more standard spreadsheet VIs.  But to even convert the excel file programtically in labview won't i still need to be able to open the excel file and get the data?
    Solved!
    Go to Solution.

    I C.
    Got it,
    the reason why I can view it using my Excel file because its in .CSV.
    I open Microsoft Excel to open .CSV file.
    But you can also open .csv file with notepad.
    So, you cannot open .xls with Read Spreadsheet File
    I learn something everyday
    Best regards,
    Krispiekream

  • MDT 2012- Unattend.xml, or worse, No existing catalog file found.

    Hello. Back again with a new issue.
    MDT2012. Win 7 pro/ x64..  I've got a an issue with a recently Sysprep/Captured image. It was successfully captured with no errors, but won't deploy... citing
    I initially had an issue with an Unattend.xml (the dreaded "5212 Welcome wizard failed" error) and it was suggested I:
    Edited Unattend.xml file and : Navigated to the SPECIALIZE step
    –highlighted “”amd64_Microsoft-windows-IE-InternetExplorer_neutral”” and
    edited the “”IEWelcomeMSG”” feild, and unticked “”write image value.””
    This did not resolve my issue, matter of fact, it may have made things worse, but since I'm not an expert, here I am.
    The image I captured has IE11 (bad idea?) and the machine is fully patched as of a week ago. My latest error is when I got BACK to UNedit the Unattend.xml file...  I'm greeted with this:
    Performing operation "generate" on Target "Catalog".
    Starting: "C:\Program Files\Microsoft Deployment Toolkit\Bin\Microsoft.BDD.Catalog35.exe" "C:\DeploymentShare\Operating Systems\WIN7PRO-X64-JAN29
    \WIN7PRO-X64-JAN29.wim" 1 > "C:\Users\(mynameremoved)\AppData\Local\Temp\Microsoft.BDD.Catalog.log" 2>&1
    No existing catalog file found.
    PROGRESS: 0: Starting.
    PROGRESS: 0: Creating mount folder: C:\Users\(mynameremoved)\AppData\Local\Temp\IMGMGR_WIN7PRO-X64-JAN29_WIN7PRO-X64DDrive_pnjtetms.yq5.
    PROGRESS: 5: Creating temp folder: C:\Users\(mynameremoved)\AppData\Local\Temp\IMGMGR_WIN7PRO-X64-JAN29_temp_2c1hyp2l.h5y.
    PROGRESS: 10: Mounting Windows image: C:\DeploymentShare\Operating Systems\WIN7PRO-X64-JAN29\WIN7PRO-X64-JAN29.wim. This might take a few minutes.
    ERROR: Unable to generate catalog on C:\DeploymentShare\Operating Systems\WIN7PRO-X64-JAN29\WIN7PRO-X64-JAN29.wim: System.ComponentModel.Win32Exception:
    The process cannot access the file because it is being used by another process
    at Microsoft.ComponentStudio.ComponentPlatformInterface.WimImageInfo.PreCreateCatalog()
    at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageInfo.CreateCatalog()
    at Microsoft.BDD.Catalog.Program.DoCatalog()
    Non-zero return code from catalog utility, rc = 2002
    Then upon closing the above window, this sits behind it: ""Unable to edit the unattend.xml for this OS because no catalog could be located or generated""
    I see the (an?) error regarding NO EXISTING CATALOG FILE FOUND... as well as PROCESS IN USE BY ANOTHER..
    What can I do to resolve the above? And did I give you enough info here...?
    Thanks!

    The part for the disk drivers is ignore able. It applies the image to the disk perfectly it is the unatend.xml file that is missing. Also I have it set up
    so if the second disk is missing that is would keep executing. You will notice this further down the line. 
    I have tested this on real hardware and a VM. the log that I have posted it from a VM (I typed it out by hand). The log for the real machine is basically the same except with out the disk errors (because It has two HDDs).

  • ITunes store wont open after upgrade & iphone wont upgrade! Help!

    I upgraded to newest version of iTunes yesterday when prompted. (windows 7)
    iTunes now wont access the store.
    I uninstalled everything and re installed it with latest version ans still wont access store.
    Existing tunes are playing but taking ages to play!
    I also tried to upgrade iphone too and it went to backing up the iphone and just jammed, I left it for a good time but it just stopped responding.
    HELP!!!!
    Thanks

    Well I don't know what "tried everything possible" means!
    top fixes for a new iTunes install/upgrade are
    - turning off security software such as Norton before the install as Apple suggests
    - installing QuickTime standalone, not regular
    http://www.apple.com/quicktime/download/standalone.html
    - setting up Norton to allow iTunes
    - scanning for malware with ewido (Free at www.ewido.net/en/)
    - last but not least, using MSCONFIG to find Windows conflicts
    http://docs.info.apple.com/article.html?artnum=302538
    Post back with any questions or your solution.

  • Quicktime wont load because the installer thinks I have a newer level quicktime installed already.

    quicktime wont load because the installer thinks I have a newer level quicktime installed already.  Thus the newest level of iTunes and quicktime will not install, help... Thanks.

    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
    After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
    Restart the PC, and try another install. Does it go through properly this time?

  • HT1926 itunes wont update because of invalid signature?

    on Windows Pro, trying to update itunes and it stops towards end of download, wont install because of "invalid signature".  how do i do a "manual update"?

    cannot remove an older version of bonjour
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another install. Does it go through this time?

  • Itunes wont download because I dont have 10.6.8 or greater. But I just installed the snowlion disk thing and my macbook is a 10.6.8 version so how do I get itunes to download?

    Itunes wont download because I dont have 10.6.8 or greater. But I just installed the snowlion disk thing and my macbook is a 10.6.8 version so how do I get itunes to download?

    Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so... Purchase a Snow Leopard Install Disc...
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Other countries...
    http://support.apple.com/kb/HE57
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
    Be sure to make a Backup of your Current System Before Upgrading...

  • Im trying to download the newest version of i tunes because i just got the i phone 5c..it wont download because i have to have i tunes 10.6.8 but it wont letme download that either because i need i tunes 10.6 to get it and i cant find that download..what

    I'm trying to download the newest version of I tunes because I just got the I phone 5c..it wont download because I have to have I tunes 10.6.8 but it wont let me download that either because I need I tunes 10.6 to get it and I can't find that download anywhere..I need to get the book for school on my I pad or phone by tomorrow...what do I do?

    Welcome to Apple Support Communities
    The iPhone 5c needs iTunes 11.1, which requires Mac OS X 10.6.8. See if your Mac can be upgraded to Mac OS X Snow Leopard > http://support.apple.com/kb/sp575 If so, buy Mac OS X Snow Leopard > http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Then, make a backup of your data with Time Machine or Disk Utility's Restore, insert the disc and follow its steps to upgrade to Mac OS X Snow Leopard. You shouldn't lose compatibility with any application. After upgrading, open  > Software Update, and install the latest version. It will install iTunes 11.1, so you will be able to sync the iPhone 5c with your Mac

  • How to Append an existing Excel file?

    I am using the jexcel api to write to a new excel file. Each time i run my program, it creates a new Excel File by the name i give it. my code to create the excelFile is as below:-
    File excelFile=new File(workDir+"\\"+fileName+".xls");
    WritableWorkbook workbook = Workbook.createWorkbook(excelFile);
    After this code i write some data to a worksheet in the above mentioned excel file. But my requirement is that I want to create the excel if it does not exist, and if it exists, then the data should be appended to the worksheet in the existing excel file. At present it creates a new excel file and does not append it.
    How can it be done? does anyone have any suggestions as to how can i tackle this problem? please suggest something.
    Ankit

    There is no ready-to-run example, as you are searching for, available.
    This has several reasons:
    - It depends on the version of Excel. Examples for Excel 2007 might not work with Excel 2010 for instance.
    - No one just wants to open Excel without doing anything with it.
    The second point is something, i want to ask you:
    Why do you want to open an existing Excel file at all? What is it, what you want to do after opening it?
    If you have LV/C/C#/VB examples doing what you are looking for, why do you want to have it in TestStand directly, so NOT using existing code (saving time and effort) and basically re-inventing the wheel?
    ActiveX is an interface for remote controlling and embedding applications with/in other applications on Windows systems. It is a PROGRAMMING interface.
    So naturally, examples and tutorials exist for programming languages. Those examples are easily converted to TestStand sequences with a basic knowledge of the programming language and TestStand. Providing links for such tutorials/examples is a valid way to give support to fellow developers because we expect the fellow to have that basic knowledge. 
    If that knowledge is not present, i highly recommend to fill that gap.
    just my 2 cents,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

Maybe you are looking for