Preloader works in Flash, but not after upload
Hi all. I'm having problems with a preloader. When I test the
preloader in Flash (using the simulate download option) it works
like a charm. I publish and upload the file to the server...and
when you visit the site, you just get a blank white page until
everything is loaded. I have included the code. Please
remember...it works correctly when simulating a download in Flash,
but it does not work at all after upload. Any ideas?
Thanks for the help!
Naw...didn't work. I'm use CS3 and all the preloaders I ever
did (using the same code) in CS2 worked fine. I'm creating the .swf
using Actionscript 2.0 (not 3.0). Is there a problem when the
document gets published with CS3 which would stop the preloader
from working on the server?
Similar Messages
-
Flash video works onDreamweaver preview but not after uploaded to site
Hi,
I created a page with FW CS3 and opened it with Dream weaver.
Using Flash CS3 I created some video clips. I then inserted three
video files to the web page. In DW preview mode I can see the
videos. I copy the source code and pasted it to the index page of
my website as well as uploaded all the sit files from my hard drive
folder to the website. The page comes up but not the videos.Search this forum for "FLASH" "UPLOAD". You'll find hundreds
of answers.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"SERocks" <[email protected]> wrote in
message
news:g11qep$n8m$[email protected]..
> Hi,
> I created a page with FW CS3 and opened it with Dream
weaver. Using Flash
> CS3
> I created some video clips. I then inserted three video
files to the web
> page.
> In DW preview mode I can see the videos. I copy the
source code and
> pasted it
> to the index page of my website as well as uploaded all
the sit files
> from my
> hard drive folder to the website. The page comes up but
not the videos.
> -
HTML Redirect is working in muse but not after publishing... HELP!
I am setting up a "Coupon code" for a website I work on. I have set up a basic HTML Redirect box. It works properly in Muse but after publish it does not work correctly anymore. I understand the "password/coupon code" is available to find in the page code, and that's OK, thats the way i designed it. Here is the link to the page Ticket Center the coupon code is GOLDEN (all caps). It should redirect to: GOLDEN PROMO CODE Please let me know what i am missing. If it is not possible to use this code with muse after its uploaded, any suggestions would be helpful. Thanks!
Here is the promo code box code:
<div class="wrapper">
<form class="form1" action="ticket-center.html">
<div class="formtitle">
</div>
<div class="input nobottomborder">
<div class="inputtext">
Coupon Code:
</div>
<div class="inputcontent">
<input type="password" id="password" /><br />
</div>
</div>
<div class="buttons">
<input class="orangebutton" type="submit" value="Submit" onclick="if (document.getElementById('password').value == 'GOLDEN') location.href = 'promo-1sae452316ad.html'; else alert('Invalid Promo Code! Please try again. CASE MATTERS');" />
</div>
</form>
</div>Presuming that I have 13 folders/directories that are
created by iWeb for each of the 13 'pages' in my
site, then I assume that to turn off the nav_bar, I
should paste 'the code' into each of the
[foldername].js files.
Is this correct?
I believe so, yes.
And to maintain this, I should be prepared to use
MassReplaceIt (+/-) to refresh this info after
Publishing to Folder any cosmetic and content
changes.
Yes
Before I do the 'paste', I would like verification
that:
1) it is in fact the [filename].js file that is my
correct choice/target.
Yes
2) when viewing the contents of the ...js file, it
seems like there would need to be some curly braces (
{ whatever ) stuff as well.
Hmm, I think it's ok just the way Cyclosaurus put it
document.getElementById('nav_layer').style.opacity = 0; // 0 = nav layer off, 1 = nav layer on.
But I could be wrong about that.
3) Does 'the Code' need to be inserted in any
particular place in the file?
Don't think so, no, but don't put it in the middle of something, if you know what I mean. The beginning or end would be best.
4) Today, I will work on moving the Content to the
Body instead of the NavBar area, but mo betta I could
just shut off the NavBar function entirely.
Well if you can do it without editing the js (move the content) then you won't have to keep re-editing after each publish.
5) Do you like Medium Roast or Dark roast - whole
bean or ground?
Hee hee... ALL OF THE ABOVE!!! -
Site works in preview but not when uploaded to the web
I have been trying to add a link from my website to another project I have been doing, a mini site made with Flash.
I wanted the link to open up a new window with the animation playing inside, and it works perfectly when I use "preview in safari" within dreamweaver, but now I've uploaded to the web it just opens up a blank window.
This is the url for the homepage:
http://kayleighthompson.com/
and the link is the ActiveAid button at the bottom of the navigation list.
If anyone knows how to get this working I'd be very grateful! It's for a uni project due in this afternoon :SI think you may be having a problem with how Flash is displayed. The Flash on the first page doesn't display in IE8... although it does in Chrome. The second page doesn't display in either. Your link is correct. I checked that.
Wish I could be more helpful, I'm having the same issue with IE and DW CS4 myself, and can't figure it out.
This may help: http://code.google.com/p/swfobject/wiki/documentation
Good luck! Let me know if you figure it out.
[email protected] -
Sound works when testing, but not when uploaded
I used the Behaviors pallet to stream my mp3 files, and it
works fine when tested locally, but as soon as I upload everything
and test it online, nothing plays. The site is
www.spidersandsnakes.net/media08.htm.
Any ideas?I suspect this is where my issue lies, but I am not sure how
to fix it. I have attached some code that defines the image
location. I am able to successfully retrieve documents with the
following, is this the same type of scenerio,
http://www.skytitleagency.com/documents/Land_Contract.doc,
except in the images folder ? -
GPRM Button scripts work in Simulate, but not after burning
Hello everyone:
I have a question regarding GPRM-based buttons and scripting menu navigation. My scripts work perfectly in DVD Studio Pro's simulate mode, but after building and formatting a DVD, the scripts do not function properly on a set top box, in Apple DVD Player, or when playing from the Video TS folder. The scripts were based off of a tutorial by Hal MacLean at dvdstudiopro.co.uk.
Essentially, I have one track which is accessed via a Main Menu or a Chapters Menu. There is an animation that plays at the head of each menu, so menu has a loop point. The user should return to the correct screen, the correct button should be highlighted, and the menu should jump to the loop point. All of these things happen in simulate mode, but after burning, the loop point is ignored: The correct menu and buttons are highlighted, but the menu plays from the beginning. Here is how the project is laid out:
From the main menu, if the user chooses Play Movie, the following script plays:
mov GPRM 0, 1
Jump Feature
From the main menu, if the user chooses Chapters, the following script plays:
mov GPRM 0, 0
Jump Chapters Menu
Each of the chapter buttons is assigned to the start of a scene. The feature's menu call is assigned to the following script:
mov GPRM 1, SPRM 8
div GPRM 1, 1024
Jump Main Menu(Loop) [GPRM 1] if (GPRM 0 = 1)
Jump Chapters Menu(Loop) [GPRM 1]
I was able to make the menus behave properly by writing the scripts this way:
mov GPRM 1, SPRM 8
div GPRM 1, 1024
Jump Main Menu Script [GPRM 1] if (GPRM 0 = 1)
Jump Chapters Menu Script [GPRM 1]
Main Menu Script:
Jump Main Menu(Loop)
Chapters Menu Script:
Jump Chapters Menu (Loop)
But, although the user is returned to the correct menu and the loop point, now only the default button is highlighted.
Has anyone run into the same issues? Can anyone see any flaws in my scripts, or have any suggests? i would really appreciate any thoughts you all have. Thanks for your time!Do you have any pre scripts atached to the menus? I was having the same problems as you and found that pre scripts and GPRMs don't play nice (at least in DSP). Removing the pre scripts solved my issue.
http://discussions.apple.com/message.jspa?messageID=4643747#4643747
Good luck! -
[SOLVED] broadcom-wl works during install, but not after.
I have this macbook air which I'm beating into submission, and it has a broadcom wifi chip. I followed the instructions here for the installation and it worked perfectly. After booting into my newly installed system I do the same, but when I do 'modprobe wl' it fails with:
# modprobe --verbose wl
insmod /lib/modules/3.14.5-1-ARCH/extramodules/wl.ko.gz
modprobe: ERROR: could not insert 'wl': Invalid argument
I checked with 'lsmod' and none of the blacklisted modules are loaded. I have no idea how to proceed but it should work since it worked during installation. Any pointers would be greatly appreciated!
EDIT: As user Namarrgon on irc pointed out, I needed to rebuild the broadcom-wl package. The reason it worked in the live usb and not in the installed system is probably because the installed system had a later kernel than the one on the live usb.
Last edited by l4than-d3vers (2014-06-05 11:31:35)At least for rt2870sta, it's a retarded bug in Linux that was introduced in 2.6.31 and is still not fixed. It works in the live environment because it has an older kernel.
Kernel 2.6.31 module conflicts
The 2.6.31 kernel caused the rt2870 driver to conflict with other wireless modules. The fix in this thread says that you need to blacklist the rt2800usb rt2x00usb and rt2x00lib modules by modifying the MODULES array in /etc/rc.conf
MODULES=( ... !rt2800usb !rt2x00usb !rt2x00lib ... ) -
Page background images show in preview but not after uploading
Hi -
I've built a page with a flash animation, and some other
minimal information below the movie. I have a page background image
that should be repeating horizontally behind everything. When I
preview it, all looks great! After I upload it to the actual site
the background images disappear. The code is all within the page.
Any ideas?never mind... problem resolved.
my error in not checking my files over. oops. -
Events on a SWC work in Flash but not AIR
I built a SWC (UIMovieClip document) in Flash CS5.
When I use it with Flash (Flash player 10), I can register events directly on all the symbols in the SWC.
When I use it in AIR (2.0), the only thing I can get events for is the SWC's document member (there are no errors when adding events to other symbols in the SWC, they just never fire).
All the examples I found on the net are using Flash CS3 for display in a web browser.
Could someone point me to a working solution for incorporating SWC's from Flash CS 5 into AIR 2.0?Only only the symbols in the SWC that are converted into a SWC Component can be used in Flex.
I don't really understand your problem but if you wawnt to import a symbol made in Flash into Flex do this:
1. Create your symbol
2. Convert it into a Flex Component (Commands -> Convert symbol to Flex component)
3. Get the SWC file
4. Add it into your project (you don't really have to do this but i prefer to)
5. In your Flex project right click it -> Propreties -> Flex Build Path -> Add SWC or Add SWC Folder
6. Select the file/folder with your SWC
7. Use the symbols into your project
The symbols will be taken from the library not the stage. Oh ya... one more thing... if you want to use var myVar:MovieClip = ... use UIMovieClip instead.
P.S. Sorry if I wrote this 'lil tutorial and that's not what u wore locking for... -
Backlight works on startup but not after further unlocking???
As above really, turn the phone off and on again and the backlight works fine, leave it to self lock or manually lock it and the backlight will not work again.
It will flash extremely quickly when I press the home or sleep button then nothing.
Any help?sounds like a hardware failure. You need to bring your phone into Apple for replacement.
-
Link works in iweb but not after it's published
It only just started after I added a shape (I made sure to send it backward and whatnot). Anyways, yeah, the link works when I click it in iWeb but refuses to work when it's published. How can I fix this?
Nevermind. I fixed it.
-
Dynamic text works in preview but not when uploaded
Can someone help me resolve as to why my dynamic text works
in DW8 preview by I get an error after FTPing the page.
Warning: require_once(/Connections/oneandone.php)
[function.require-once]: failed to open stream: No such file or
directory in /homepages/0/dxxxx/htdocs/xxxcom/index_by_town.php on
line 1
Fatal error: require_once() [function.require]: Failed
opening required '/Connections/oneandone.php'
(include_path='.:/usr/local/lib/php5') in
/homepages/0/dxxxx/htdocs/xxxcom/index_by_town.php on line 1
My testing server is my remote server.
Thanksah ha sorted - seems to have something to do with relative
links. Changing site root relative links to document relative links
has done the trick.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=263&threadid=1154447&hi ghlight_key=y&keyword1=virtual%28%29 -
Titles work in iMovie but not after I export them
Everything seems to be working normally in my iMovie project but when I export the video, some of the titles are no longer readable (they seem too transparent). When I view the project is full screen mode - it works but once I finalize it and export it, the last few titles get messed up.
I cannot change the color of the text because I am using the "pixie dust" title (which is only in one color).
I have tried clearing the cache, closing iMovie, restaring my computer, duplicating the projects and deleting the old ones...
What else can I do?
THANK YOU!Open it in QuickTime Player. Then press Command-I to open the Inspector.
Tell us what you see next to the word FORMAT: and also tell us the dimensions. -
cannot start apple mobile device. error code 193: Oxc.1
Actually my iTunes just started!!!!
So if anyone else is having this problem, the last thing I tried was copying the QTMovieWin.dll from my C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to my C:\Program Files (x86)\iTunes folder and started my iTunes Helper.exe
Hope that can help someone! -
After uninstalling and downloading the latest Abobe Flash player, I can no lnger play youtube videos. I get the message "blocked plug-in". It works in Firefox, but not Safari?
Frostbitblue,
in Safari’s Preferences, select its Security tab, and make sure that its “Internet plug-ins: Allow Plug-ins” checkbox is checked.
Maybe you are looking for
-
SCDPM 2012 R2 Backup with Exchange 2013 SP1 CU6 DAG
Hi, Correct me if I'm wrong. DAG setup as follow, 1. Server1\MBX01 (Active) 2. Server2\MBX01 (Passive) DPM 1. Select Full for Active 2. Select Copy for Passive We always select active copy so that logs can be purge. On the other hand, if we select b
-
WS-SDK Scheduling two instances of the same report with different params
I'm using the web services SDK for Business Objects XI 3.1 SP 2 to schedule reports. I've got it so that I can successful schedule a report with prompts, setting the value for the prompt and running the report. However, I'm now trying to schedule two
-
BR error BR0301W SQL error -980 at location BrDbfInfoGet-33 , ORA-00980
Hi <br/> i get this error by all kind backup and by checkdb, verify db<br/> <br/> Oracle 10.2.0.4, RHEL 4 32bit, <br/> Netweaver 2004s (7)<br/> <br/> I have one Oracle NW7 for Netweaver PI (NW7) and Portal (EP7)<br/> <br/> <br/> <br/> BR0051I BRBA
-
Processing an XML "command file"
Hi! I am planning to implement an application where the middle-tier (a DataWebBean relying on BC4J?) processes XML files. These XML files would be "command" files to insert/update/delete data in the database - actually they would be very similar to d
-
Is it possible to run Java Web Start without using Tomcat? I was given a server to run my website but the jnlp file does open the Java Web Start program.