Prelude CC 2014 Ingest - Processing takes forever

In Prelude CC 2014 when I go to ingest it says "processing" over every clip as usual. Unlike the previous version, however, it takes forever for the media to finish this processing, if at all. The media in question is Canon DSLR footage and Canon VIXIA footage (mp4), being ingested and transcoded from an external drive (WD My Passport Ultra). I've reinstalled the previous version of Prelude (2.0) and everything works normally. Is there any setting in Prelude CC 2014 that might combat this problem?

Thanks for your reply. To answer your questions:
1. The operating system is primarily OSX Mountain Lion (10.8.5). I have tested the same software in Windows 7 64 bit and had the same problem.
2. The assets in question are on an external drive, a WD My Passport Ultra. I transferred the files to an internal drive and had the same problem.
3. The steps are simply this: Open Prelude, click Ingest, select a folder to preview and wait for the previews to load.
(Screenshot 1, Prelude CC 2014 3.0.0)
Above is a folder with Canon DSLR footage (5D MkII). Granted, there are a lot of clips in this folder (177), but I've left this for 20 minutes and come back to it still saying "Processing".
(Screenshot 2, Prelude CC 2014 3.0.0)
The next image is of a Canon VIXIA folder which has mp4 footage. The previews will blink then Prelude will become non-responsive. I have to force-quit at this point.
(Screenshot 3, Prelude CC 2.2.0)
As you can see the same folder from screenshot 1 loads promptly in Prelude CC 2.2.0. Processing time takes around 15-20 seconds.
(Screenshot 4, Prelude CC 2.2.0)
Same folder from screenshot 2 loads fine in Prelude CC 2.2.0. No program issues to speak of.
I hope this sheds some light on this problem.

Similar Messages

Syncing process takes forever

Synching my ipod touch is fast and easy - but when I connect my ipad to the same imac (same imac supports my ipod touch), it takes forever to start the syncing process then when it does finally start, it takes forever to complete the sync. Running latest "OSes" on imac and ipad. It took 6 plus hours yesterday transferring >9k photos - to the ipad when most were already on the ipad -- why recopy them?
Today, the synch process -- even if initiated right after a sucessful sync (what could change in the one minute!) takes forever. Per above, running the lates updates on ipad and imac. No voice messages in the equation.

This link provides the data included with your iPhone's backup.
http://support.apple.com/kb/HT1766
Are you using a number of 3rd party apps that store data? Do you have a number of photos in your iPhone's camera roll which are not removed from your iPhone's camera after the photos are imported by your computer with the number of photos available in the camera roll continuing to increase with every photo captured by your iPhone, or saved from a received email or from a website where these photos are stored?
The backup for my iPhone takes a minute or two.

Payment processing takes forever

I am stuck with "your payment is being processed" for 30min plus.
Any solutions?
Maybe somebody experienced it and solved somehow?

I'm having the same issue here. I heard someone say that it may take 24 hours. I haven't been at it that long but I'm a bit concerned that it just isn't processing.

Partitioning takes forever

The partitioning process takes forever to finish. What I mean is, it stays stuck partioning my HDD and the status bar never moves beyond a certain point. Sorry I havent been able to take a screenshot because I dont want to try again if by some off chance I can damage the drive without first consulting as to why this is happening.
I had partioned my drive a time in the past but had to delete it because of storage needs and didnt have the money to purchase a new drive.

160GB in chunks. And yet most errors are "some files cannot be removed, you need to restore to single HFS+"
http://en.wikipedia.org/wiki/Filesystemfragmentation
So just 'nuke the drive and restore - SuperDuper.
Then try again.
However, I like to keep a boot drive as 50% free for OS X.

Imaging takes forever?

When attempting to image a 10.4 disc (from apple's retail 10.4 client), the imaging process takes forever...I've chosen to to completely bare-bones...no scripts, add-ons, extra packages, etc.
When finally telling the image utility to begin its process...it takes forever! It has spun for hours in some cases with no (apparent) progress...
I'm on the newest 17" powerbook with 10.4.2, admin tools are updated, everything is updated. I've got 1.5 GB RAM with nothing else running.
What could be going on?
Thanks,
jeremy

I had the exact same problem and it turned out I had accidently placed the wrong subnet into the Network settings. Instead of setting my subnet on the NIC as 255.255.252.0, I had instead used the standard 255.255.255.0. So traffic will go out, but more in a broadcast sense and packets will get lost on the network. As soon as I made the change to the server, I saw network traffic spike and the lab was finished in no time.

Portal WebApp builds take FOREVER

Everytime I make a small change to a pageflow in a portal app, I need to rebuild
the portal webapp. This process takes FOREVER. Is there any faster way to do this
build? Can I disable the building of framework JSPs and Portal controls that seem
to be taking the most time?
Happy New Year...
Fumi

Hi,
This is BUG # 1721741, the workaround:
Create 2 additional indexes:
CREATE INDEX WWA_MODULE_BINDINGS_IDX1
ON WWA_MODULE_BINDINGS$(
SUBSCRIBER_ID,
MODULE_ID,
MODULE_VERSION,
MODULE_BLOCK_ID,
MODULE_ATTR_ID)
CREATE INDEX WWA_MODULE_LOV_BINDINGS_IDX1
ON WWA_MODULE_LOV_BINDINGS$(
SUBSCRIBER_ID,
MODULE_ID,
MODULE_VERSION,
MODULE_BLOCK_ID,
MODULE_ATTR_ID)
Those indexes are missing in the standard fresh install but present if you run an upgrade from versions 3.0.6 or 3.0.7.
*****!!!!! Please note: This workaround can be applied ONLY to Portal forms version 3.0.8.9.8. Earlier versions of the Portal do not need those indexes !!!!!******
This bug is fixed in 3.0.9.
Thanks,
Dmitry

Why does it take forever to verifiy my keychain code

When I try to verify my keychain on my Iphone 6 it takes forever to verify the code that was sent to me. Why does this process take forever to complete?

Your title and question are two different things.
I have no idea what you are asking?
Not sure if your asking why you don't get email on your phone after you've changed the password or why the email doesn't delete when you deletee it from the computer?

Prelude CC 2014 crashes on ingest

I'm using Prelude CC 2014 (3.0.1 (3) build) on mac OS X 10.9.4. When I double click to ingest or press the ingest button Prelude crashes immediately

Hi,
Thank you for your post.
Could you please send us the crash report so we can take a look?
To get the crash report , please refer the following steps:
Click the “Report…” button when the warning dialog pops-up after crash.
Copy all the content in the “Problem Details and System Configuration” and paste to Textedit, then save.
Please send the crash report file to me - [email protected]
Best regards,
Ada

TS1398 what is the trick with getting connected to airport WiFi? It takes forever to go from the settings portion then to the browser to "accept" terms. Am I missing something to speed the process?

what is the trick with getting connected to airport WiFi? It takes forever to go from the settings portion then to the browser to "accept" terms. Am I missing something to speed the process?

OK, I figured out from the various postings on here and way too many hours overnight how to pretty much make the Yoga do what it is supposed to do. I've written up a step by step at this link that may help some of you with your problems as well
Let me know if this helps!

I have an iPod Touch 4g with 4.1 software, but it takes forever to update the software, how can I speed up the process?

I have an iPod Touch 4g with 4.1 software, but it takes forever to update the software, how can I speed up the process?

Nothing you can do. Presently the Apple servers are overloaded because of iOS 6.

Prelude CC 2014 (3.1.0) - No In/Out point on Ingest?

Just installed the latest version of Prelude CC 2014 (3.1.0) this morning and I'm trying to set simple In/Out points before I ingest some footage, but "I" and "O" don't seem to be responding. Am I missing something here?

Hi -
Be sure to click on the thumbnail such that you see the play back bar appear (has the play head visible in the bar at the foot of the thumbnail). Now you can drag-drop the playhead and use I/O keys to set your IN and OUT Points - or you can use JKL shortcuts to move the playhead.
Be sure to enable transcode to turn your IN-OUT regions into new assets which will appear in the Project Panel.
New for Prelude 3.1 you can now use this same method for thumbnails in the Project panel. You can set an IN-OUT range and append it directly into an open rough cut by simply hitting the 'A' key (for Append).
Hope this helps and thanks for downloading the new version!
Michael

Firefox takes forever to open/startup. How can I fix this?

I am running Windows XP. All updates are current. IE opens up fast, but Firefox takes forever. Also, it is using way too much memory. Please advise.

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls
Create a new profile as a test to check if your current profile is causing the problems.<br />
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

File encoded with x264 takes forever to load in Encore CS 5.5

I use Encore mostly because it takes h.264 video encoded with the x264 compressor, which provides much higher quality than any other compressor. The problem is that these files take forever to load. For example, right now I'm trying to load a video that is about 1 hour and 20 minutes long, encoded at 38 Mbps, and the file is 20.9 GBytes. Now it's 3 PM and I imported this file along with the AC3 file over an hour ago. The Encore process shows as not responding, but when I open the Windows 7 Resource Monitor, in the disk tab it shows that it's reading the video file at a rate of about 45 MB/s, so I didn't kill the Encore process. I know eventually it's going to stop and load the file, but I don't understand why it takes so long. The encoding parameters that I used in x264 are these:
x264 --level 4.1 --bluray-compat --preset slow --bitrate 38000 --keyint 30 --min-keyint 2 --open-gop --weightp 0 --slices 4 --vbv-bufsize 30000 --vbv-maxrate 40000 --rc-lookahead 40 --tff --output "output" "input"
This comes from a family video that is 1080 59.94i. This time these two parameters appeared because I selected Blu-ray as the target: --bluray-compat and --open-gop, which I don't normally use, but still, even when I don't use them, video encoded with x264 takes forever to load. Does anybody here know what could be the problem?

What's weird is last year I encoded a file that was almost two hours long and Encore took it without trouble, although it was CS5, not 5.5. Since I had kept the avs and bat files, and also the x264.exe from that encode, I brought them into the current working folder and I just modified the file names in the avs and bat files to point to the new avi and encode to the new h264 file. So I encoded this file, I imported it into Encore, and it still hangs. Maybe it was a change from CS5 to 5.1 that introduced a problem. x264 has been certified to be Blu-ray compliant since over a year ago, and I already put this file to a Blu-ray with TSMuxer, since it was a family video and I didn't really need menus, and it plays perfectly fine in my Blu-ray player.
But I'm sure there must be something, one or two parameters that would make it compatible. For example, after encoding the file again the last time, now I can import it into Encore, and it doesn't stay frozen forever, but it doesn't show me the video and as soon as I try to move the timeline cursor it freezes and doesn't let me do anything for several minutes. So still it's not usable. But it's a change from the first encode where the progress dialog would be there for several hours and do nothing at all.

IPhone 3.0 download takes forever

I've been trying to download the new 3.0 upgrade for my IPhone but it takes forever to back up my files. The process is extremely slow and I get half way through it and then get a message stating that my phone disconnected. Can someone help me with this?

You are free to work with any released SDK.
Beta/unreleased SDKs are for review and use by committed developers so that Apple can control their exposure as they are prepared for the general public.
Paying the fee to register as a developer brings additional benefits, one of which is access to pre-release software. A recent pre-release of iTunes was part of this program as well, again, providing a controlled environment that brings not only a first-look, but associated risks common to pre-release products. It isn't hard to imagine a free-for-all scenario leading to issues that would sidetrack an otherwise organized process.
if i plan to sell it i pay them an additional 30% of my income!?
You are also of course free to establish your own mobile platform, OS, app store, sales, marketing, development, support and distribution network where you can keep 100% as you like...after expenses, of course, whatever those may be

Creating the index takes forever

Hi,
I'm trying to index ~1100 PDF documents, who size varies between 20KB and 4MB, those PDF are stored in two directories on our Web server, so I use a URL_DATASTORE to get them. I have a column that contains the correct URL to the PDF, the column is a VARCHAR2(2000). 55% of documents are in French, the 45% remaining are English documents. I created this set of preferences :
begin
ctx_ddl.create_preference('AAPDF_DATA_PREF','URL_DATASTORE');
ctx_ddl.set_attribute('AAPDF_DATA_PREF','NO_PROXY','acaiq.com');
ctx_ddl.set_attribute('AAPDF_DATA_PREF','Timeout','60');
end;
begin
ctx_ddl.create_preference('LEXIQUE_ANGLAIS','BASIC_LEXER');
ctx_ddl.set_attribute('LEXIQUE_ANGLAIS','index_themes','no');
ctx_ddl.set_attribute('LEXIQUE_ANGLAIS','index_text','yes');
ctx_ddl.set_attribute('LEXIQUE_ANGLAIS','theme_language','english');
end;
begin
ctx_ddl.create_preference('LEXIQUE_FRANCAIS','BASIC_LEXER');
ctx_ddl.set_attribute('LEXIQUE_FRANCAIS','index_themes','no');
ctx_ddl.set_attribute('LEXIQUE_FRANCAIS','index_text','yes');
ctx_ddl.set_attribute('LEXIQUE_FRANCAIS','theme_language','french');
end;
begin
ctx_ddl.create_preference('LEXIQUE_GLOBAL','MULTI_LEXER');
ctx_ddl.add_sub_lexer('LEXIQUE_GLOBAL','DEFAULT','LEXIQUE_ANGLAIS');
ctx_ddl.add_sub_lexer('LEXIQUE_GLOBAL','french','LEXIQUE_FRANCAIS','fre');
end;
begin
ctx_ddl.create_preference('PREF_FUZZY', 'BASIC_WORDLIST');
ctx_ddl.set_attribute('PREF_FUZZY','FUZZY_MATCH','FRENCH');
ctx_ddl.set_attribute('PREF_FUZZY','FUZZY_SCORE','30');
ctx_ddl.set_attribute('PREF_FUZZY','FUZZY_NUMRESULTS','200');
ctx_ddl.set_attribute('PREF_FUZZY','SUBSTRING_INDEX','TRUE');
ctx_ddl.set_attribute('PREF_FUZZY','STEMMER','FRENCH');
end;
And I created the index with this DML :
CREATE INDEX ACAIQ.aapdf_index ON AA_PDF(AAPDF_CONTENU) INDEXTYPE IS ctxsys.context PARALLEL 1 PARAMETERS ('datastore AAPDF_DATA_PREF lexer LEXIQUE_GLOBAL language column AAPDF_LANGUE_ISO wordlist PREF_FUZZY memory 10M');
The problem is that it takes forever to create the index. I started the create process yesterday after lunch, and it still running :-/ I looked at my Web server logs and I do see my Oracle server fetching the PDF, but it fetch ~12 PDF per hour.
I'm doing this on our test server, it's a P4 1.4 Ghz with RedHat Linux 8 and Oracle 9i 9.2.02. It's not a fast server, but still I don't think it's normal to take 24 hours to index about 1 GB of data.

I recreated the index with a 50M memory parameter instead of 10M. It don't speed up the process, in 40 minutes it only indexed 17 documents.
vmstat stats when indexing the PDF documents :
# vmstat -n 15
procs memory swap io system cpu
r b w swpd free buff cache si so bi bo in cs us sy id
1 2 0 116104 6796 18120 489684 0 0 3 0 3 7 4 7 2
0 3 0 116104 6776 18200 489256 0 0 62 1500 671 317 48 3 49
1 1 0 116104 7084 18216 489728 0 0 37 1578 673 333 44 3 53
0 1 0 116104 6776 18256 489256 0 0 24 1577 669 322 50 3 47
1 0 0 116104 6908 18300 489876 0 0 18 1375 662 305 33 3 65
0 1 0 116104 7000 18328 488136 0 0 19 1425 662 314 33 3 64
0 1 0 116104 7812 18356 488892 0 0 31 1066 609 207 44 2 53
1 1 0 116104 6776 18380 489168 1 0 19 1198 648 285 19 2 79
0 1 0 116104 6776 18412 488212 0 0 23 1193 627 244 41 2 57
2 0 0 116104 6776 18432 489324 0 0 34 1524 664 313 48 3 49
1 0 0 116104 6780 18456 488572 0 0 26 1430 660 308 39 3 58
2 0 0 116104 6776 18500 488424 0 0 32 1484 667 316 45 3 52
1 1 0 116104 6776 18516 487488 0 0 11 1301 650 287 28 3 69
0 1 0 116104 6776 18560 488316 0 0 35 1183 637 264 30 2 68
0 1 0 116104 6776 18584 487344 0 0 34 1363 645 276 47 3 50
2 0 0 116104 6776 18604 488424 0 0 22 1437 660 306 39 3 58

Prelude CC 2014 Ingest - Processing takes forever

Similar Messages

Maybe you are looking for