Prelude Help | Rough cuts

This question was posted in response to the following article: http://helpx.adobe.com/prelude/using/prelude-create-roughcut.html

Hi StevenGotts –
Roughcuts were originally designed with the non-editor in mind. Target user is more in the realm of the producer, assistants, journalists, etc. Roughcuts allow you to create the proper sequence for your story without having to think about the detailed edit decisions (like transitions and effects, etc). You can take the subclips you have created from the logging step and easily drag-drop them into the Roughcut Timeline and build your story. If you are a non-editor this is the final step you take before sending this to edit. Once in edit, the roughcut becomes a sequence which provides the editor the overall sense of the story the producer/assistant/etc is trying to tell. All markers and comments come along for the ride to provide additional commentary to support the vision.
For an editor using Prelude, we realize that creating a roughcut is probably not a step you want or need since you are already comfortable creating sequences in your NLE. If this is the case, you can use Prelude to ingest, log and organize your clips quickly. Then you can select your clips in the Prelude Project Panel and send them to Premiere Pro. Once in Premiere Pro you would then create your sequences and do your edit.
Let me know if you have any further questions.
Thanks for the question!
Regards,
Michael

Similar Messages

  • Rough cuts from Prelude lack audio source

    Hey everyone,
    this is my first project with a Prelude to Premiere Pro workflow and so far everything worked just fine.
    Although after creating a couple of rough cuts in Prelude and sending them to Premiere Pro I am experiencing a problem with the imported audio:
    All clips within a rough cut do not play back any audio even though they did in Prelude. I found out that after beeing sent to Premiere all clips seem to loose their audio track source.
    So what I can do to relink my audio is to righclick->audio channels -> choose the right source. If I want to do this for multiple clips at once it will only work for clips shot with the same camera / format / channel names.
    As I am working with footage of three different cameras I am trying to understand what's going on.
    Has anyone of you experienced a similar issue?
    Thanks for your help.

    Xoxidine,
    Prelude CC, the new version that has the new feature to automatically conform clips after ingest, will be shipping June 17. http://www.adobe.com/products/prelude.html
    As to forcing a reconform, please try this:
    Quit Prelude
    Clear out your Media Cache Files folder, or if you can determine specifically the files to delete-- they're named in such a way you can tell which files go with which clips surgically remove the files for the clips you want to reconform
    Mac: delete the .cfa and .pek files located in ~/Library/Application Support/Adobe/Common/Media Cache Files/
    remember "~" indicates your Home directory. On my system this is located at /Users/wplate
    another point: On Lion and Mtn Lion the Library folder is hidden by default. Hold the Option key while selecting the Go menu in the Finder and "Library" appears. Choose that and a window pointing to ~/Library appears
    Win: delete the .cfa and .pek files located in C:\Users\<your user>\AppData\Roaming\Adobe\Common\Media Cache Files\AppData is a hidden folder. Once I was in \Users\Wes I then clicked into the address bar to type the AppData name and after hitting Enter that directory was opened.
    It is also possible your media cache files are set to be elsewhere. The setting is in the Prelude preferences in the Media category.
    Relaunch Prelude
    Open the clip again, it should reconform
    I tested this with Prelude CS6 on both Mac and Win and it worked for me on both platforms.

  • Creating Rough Cuts from an Extension in Prelude CC 2014

    I am building an extension panel using extension builder 3 for Prelude CC 2014 and want to have a button to create rough cuts from a selection of markers. After looking at the CSXS API I can see that the events which I would need to use, such as com.adobe.browser.event.CreateRoughCut only seem to be available in Library mode. Therefore is there no way, now or in the future that I can program the panel to create rough cuts in Prelude if I want to run in native mode?
    Thanks,
    Jonathan

    Ok sorry, I get 25 FPS rough cut if I drag that clip onto the rough cut icon. I can't create the rough cut first and then add the clip to it.
    Would be handy to be able to decide in advance.
    Thanks!

  • Why won't my Prelude Rough Cut material appear in Premiere Pro?

    I've done everything accordingly.  I have my Rough Cut ready, but everytime I go to send it to Premiere Pro, it fails to do so.
    What am I missing here?  Is it my directory location that's the problem?  I have no idea as to why it won't do as I say.

    I'll get the image once I can obtain it - it's not appearing atm.
    I have CS6 for both programs.
    Yes, nothing happens when it's empty.  There is a failure with the connection between the softwares.  I also had this problem with trying to transfer files from Premiere to Speedgrade a while back.  I never did find out the problem.
    Is there a central hub or connecting device that provides this operation, because I have a feeling that that is what's stopping it from operating correctly.

  • I only get one audio channel when i make a rough cut.

    Hey everyone,
    when I'm making a rough cut with my subclips in Adobe Prelude, he combines my two audio channels into one track. Even when i export my subclips to Premiere Pro I also get one audio track with two audio channels in it. What am I doing wrong?
    I'm working on Mac and Prelude CC 2014 and Premiere Pro CC v8.1.
    Can somebody help me?
    Sven Jansen
    Junior Video Editor
    The Netherlands

    Hi Sven,
    You are doing nothing wrong here. If you will expand the audio track in both Prelude and Premiere, you can see that both the audio channels are in place. Its just the difference in the way the channels are being represented in Prelude timeline and rought cut.
    Please let me know if you are loosing any of your audio channel.
    Thanks,
    Ramesh.

  • Error while creating rough cut plannin profile using Info structure

    Hi,
    I got the following error while creating rough cut planning profile for Info structure,
    Capacity planning is not possible for this info structure S504
    Message no. MA489
    Diagnosis
    In the planning parameters for info structure S504, no key figure for capacity planning has been entered.
    Procedure
    If you want to capacity planning to be possible for this info structure, you need to enter a capacity key figure in the planning parameters for the info structure in the Implementation Guide.
    The info structure which i used here is created by me. Can any one help me to overcome this error
    Waiting for your replies
    G.Muthamil Murugan.

    Hi addy,
    Thanks for your reply. I have maintained the following Info structure which I created,
    Under characteristic I have maintained the following,
    1.Sales Organisation.
    2.Sales group
    3. Sales office
    4. Distribution channel
    5.Division
    6.Material
    Under Key figure I have maintain the following,
    1. Order items
    2. Production
    3.Sales
    4. Stock level
    5. Target stock level
    6. Day's Supply
    7. available capacity
    8.Target days supply
    I don t know where i did mistake. can you correct me.
    Regards,
    Muthamil Murugan.G

  • Rough cut planning-sop

    Dear Friends,
    For doing roughcut plan for one finished good , first i have created versions as per product group.then next step is disaggregate to sub groups. then after to material. now i got planning qty's for particular material. to do roughcut planning as against material quantites i have created one rough cut plan by selecting one workcentre as constraint(via t-code mc35).After doing this system is giving message roughcut profile is generated. then i went for mc88 to look after my work centre capacity load. i am getting gray position on view tab. so that iam not able to click on the view tab to serve the desired.how to de-gray.
    extras>capacity situation> ______view.
    pls.suggest how to solve the problem or is there any settings involved at workcentre or routing level or any setting is needed to pop up view tab. it will be very helpful to me.

    Hi,
    Create a prod group using mc84.
    create a rc plan using mc81.
    create a rc cap profile using mc35, here give the base qty as 1, lot size etc...
    Then in the resource , give the bottle neck workcenter . & enter the time to produce one piece in that particular work center.
    use mc82, & choose the corresponding inactive version no.
    In mc82 view, after checking the capacity situation(By choosing view, capacity situation, show) you can check the load for that particular resource. Once the load is 100 %. You can save it.
    Use mc78, copy the inactive version no to active no. (a00).
    Then in mc82 view, go to Extras,
    transfer to demand management,
    Choose the strategy as LSF/VSF... according to your scenario & then click transfer.
    Hope this helps...
    Regards,
    Senthilkumar SD

  • Rough cut planning

    Dear Experts ,
                       I have done foll setting :
    Work center ugage : all task list type ( 009)
    OPU3 : SelID:roughPlng 03
    OPU5 : RCutPlg horizon 100
                SelID:roughPln 03
    Sche and general cap req is activated .
    Created rough cut profile in mc35 after putting work center its not automatically proposing time . I mean SOP is done and it has not transferred to demand ( AS capacity planning is not done )
    Secondly when I go to MC82 and check capacity situation there is blank , I mean show option is gray not selectable .
    Please help .
    Neal

    My steps in Mc35
    Entered prod group , plant + execute
    Time span 30 days
    Status 4
    From Lot Size 1 to 9999
    Usage 1
    Clicked on lense Work center,Plant,Unit- ( tried min and HR )
    after entering this there are just blank columns coming ahed of it and system wont let me save without entering values in those columen , I am suppose to enter some time or system will propose according to me SOP plan ?
    Neal .

  • How can we define time stamp in rough cut planning profile

    Hi all
    There is no time stamp(From date to date) in Rough cut planning profile and it is just time span (0-5 ,5-10,... workdays) . If I have different capacity for my resource in different intervals how should I define it so that in planning table it can take it to account and show me requirement versus avalilable capacity acoordingly.Note that we are working with repetitive plannig and our resources are lines which have different production rate between each interval.
    Regards
    Babak Bolourchi

    Dear,
    In REM you can use planning table through MF50 for your requirement.
    For time stamp in rough cut planning profile   please refer my reply from this link,
    [Rough cut planning|Rough cut planning profile]
    [Link 2|https://forums.sdn.sap.com/click.jspa?searchID=25236413&messageID=6404039]
    Hope it will help you.
    Regards,
    R.Brahmankar

  • Rough Cut Planning Profile in SOP

    Hi,
    Need an input on the Values keyed in to the Rough cut capacity profile? Is there any documentation on the same?
    I have maintained the Time span as 1 work day and the basse quantity as 1. In the resource table, i have keyed in the work center and the unit as H. Now when i maintain a value of 1 under the first day the capacity req is 1 in SOP but when i maintain a value of 1 in day 1 and day 2- the capacity requirement doubles
    Edited by: Karthikeyan Balasubramaniam on May 9, 2008 4:28 AM
    Edited by: Karthikeyan Balasubramaniam on May 9, 2008 4:29 AM

    Hi Karthikeyan,
    The follwoing information given by sap will be useful.
    help.sap.com/printdocu/core/Print46c/en/data/pdf/PPCRPSOP/PPCRP_SOP.pdf
    help.sap.com/saphelp_45b/helpdata/en/a5/63211443a211d189410000e829fbbd/frameset.htm
    Reward if useful.
    Thanks and Regards,
    /N

  • Rough cut planning profile

    Hi Gurus,
    Our scenario is we have two plants.The sales orders and the PIRs will be created in the Plant 1 and these requirements will be transferred as Stock transport orders to plant 2(with special procurement key) .All the materials will be manufactured in plant2.BOMs and routings are maintained in Plant 2.
    In this case if i want to maintain the rought cut planning profile , how can i map the scenario.
    Please help me in this.
    Thanks in advance,
    Ravi

    Hi Krishna,
    There are two plants.
    Plant 1
    Plant 2
    We will be creating PIRs in Plant 1.There is a special procurement key maintained for material which will say stock transfer from plant 2.
    The below are the steps:
    1. Create PIRs in the plant1.
    2. Run MRP
    3. STO req. will be created in Plant 1 against the PIRs.
    4. As the special procurement key is maintained in material master Planned orders will be generated in plant 2 against these  STOs from plant1.And production will be done in plant 2.
    So, now if i want to do rough cut plannig profile how can i proceed.
    Thanks,
    Ravi

  • Costs in Resource Leveling of Rough-cut planning Grayed out

    Hi PP Gurus,
    I have created PG and Rough-cut planning profille.
    In MC81-Create Rough cut planning, I have been not able to see Costs under Views->Capacity situation->Rough cut planning->Costs.
    Because Costs are greyed out.
    Please Help me.
    Thanks in Advance
    Shiva

    closed

  • Rough Cut Issues in Premiere

    REALLY FRUSTRATED!
    So I send my rough cut to Premiere, then I drag my rough cut to the timeline, all seems to be fine. But if I delete that rough cut from the timeline it is no longer available to bring into the timeline again, it is just blank and error message "No content in sequence In/Out Range".
    I've tried it with the "write XMP ID to files on import" checked and unchecked. I don't even know if this has anything to do with the rough cut, ugh!
    Also, if I rearrange the bins I sent from Prelude in any manner whatsoever the rough cut is lost!
    So frustrated I am beginning to think I have wasted months of time making rough cuts in Prelude,

    Hey Michael,
    Thanks for getting back to me so soon   Sorry, I have to give you links to imgur for pictures of my desktop. I tried everything people suggested, but I still cannot get the insert link or insert photo on the forum to work, ugh!
    The problem I was having yesterday is that the rough cut sequence file remains in the Premiere Pro Project Panel after deleting it from the timeline, but does not contain anything once it is deleted from the timeline, the thumbnail becomes blank/black and the rough cut footage cannot be brought back into the same or a different timeline without going back to Prelude and resending the rough cut and associated footage to Premiere. I was getting "No content in sequence In/Out Range". 
    http://i.imgur.com/74uBHvI.jpg
    However, this morning I start up my computer, reopen Prelude and start Premiere project from scratch. Then I sent the same rough cut as yesterday to Premiere. This time when I drag the rough cut to the timeline Premiere makes a new duplicate sequence. That did not happen yesterday. I have no idea why as all settings are identical.
    http://imgur.com/L0KirVB
    *Note I put the additional sequence on the timeline cause I wanted to see if it was identical.
    So, my next step was to delete the rough cut from the timeline and bring it back into the timeline. I get the same message "No content in sequence In/Out Range".
    Then I repeated everything again, only this time if I double click the rough cut to bring it into the timeline instead of dragging it. It does not make a duplicate sequence.
    http://i.imgur.com/YlfvQ2h.jpg
    Then I delete the rough cut in the timeline and try to bring it back in to the timeline and get the "No content in sequence In/Out Range" message. So in order to have access to that rough cut again I have to go back to Prelude and have it send the roughcut and associated footage back into Premiere.
    http://i.imgur.com/iQ9ozDY.jpg
    All the footage used in the rough cut sent over to Premiere from Prelude is still accessible in the project panel after deleting the rough cut from the timeline. It is the rough cut itself that is no longer available once it is ingested into the timeline and then deleted.
    My real concern in working with my rough cuts from Prelude is the stability of the rough cut. Once I start working within the roughcut footage and I decide to add, edit or delete clips am I going to have issues. If I have to start going back to Prelude to resend rough cuts then this will be a huge issue and it would just be better for me to start with my original footage as opposed to the rough cuts.
    I hope this gives you a better understanding of the problem. If you need any more info or if you need to do remote access to my system please let me know. Thanks again!

  • Rough -cut plan with capacity requirment calculation

    Hi all,
    We checking SOP with rough-cut plan
    We created Rough-cut profile in mc35 for our bottle neck work center with base quantity -1 and time span - 1
    then we selected new work center (there is no existing cap req). and assigned base unit measure:min.
    and we assigned 1min for each day and saved the profile.
    Now we went to mc88 and checked the material's active version production plan. (period split- DAY)
    in View -> capacity situation -> rough cut planning -> show.
    System calculates some capacity requirement for our production plan.
    Say for tomorrow's date i given 1000 qty - production plan.
    but system showing capacity req
    Work center:  TESTWC3                  Plant: 0001         Capacity:  001
    Info structur  Material          Plant   Order qty     Unit     From              To          Capacity reqmts      Unit
    S076            TESTFERT14    0001  1000.000       EA    29.01.2010  11.02.2010   9000.000              MIN
    with 9000min and cap load more than 652% ( Actuallly  it has to show 1000min as per rough cut plan profile)
    Our available capacity of work center per day - 1380 min
    We cant understand the capacity requirement calculation in MC88..
    Help us out...
    Thanks in advance

    Hi,
    Rough cut planning is genrally done for the group of material say product group, group of workcentre rather than individual material or workcentre.
    As standard, in resource table whatever the value you enter that corresponds to no. of days. Each column represents one day.
    Pl. refer this link for clear understanding of the same.
    http://help.sap.com/saphelp_47x200/helpdata/en/a5/63212e43a211d189410000e829fbbd/frameset.htm
    Madhava

  • Rough cut planning & available capacity

    I need one clarification, in the rough cut planning, the existing load
    is not considering for available capacity.It is considering only from
    the resource capacity.
    E.g : Avaialble capacity of for Resource A (today) is 24 hr
          One Order is created and released for 4 hr with Resource A
          As per that now my available capacity of the resource is only 20 hr
          In SOP planning view, it showing as 24 hrs.
          And If i am running the SOP today at 1400hrs for calculating the
    resource capacity. Practically my avaialble capacity is 10hrs. But
    in the system it showing as 24hrs.
    How to capture the above both requirements?
    2. Through roughcut planning we can able calcualte the cost, material and
    PRT availability also. But it is not coming the the SOP screen.
    Is it any configuration i missed out? Help me out
    Regards,
    sakthivel
    <Title of the thread has been changed. Please use meaningful title.>
    Edited by: Csaba Szommer on Nov 15, 2010 9:52 PM
    Edited by: Csaba Szommer on Nov 15, 2010 9:58 PM

    Hi!
    Available capacity means the total capacity available for use in production. Presence of an requirement will not reduce the available capacity.
    Regarding SOP. Check for the starting time of the order or requirement. See if you can schedule from the current time instead of start of the day.
    Regards,
    S.Satish Kumar

Maybe you are looking for

  • Downloads/purchases from AppleTV versus iTunes

    When I purchase a movie on iTunes (on my computer or iPhone) it immediately begins downloading and is added immediately to my "purchased" list on AppleTV.   However, when I purchase a movie from AppleTV, most of the time it does not download and is o

  • Novice question: ArrayList error

    Two classes: Bank and Customer. Customer class has this constructor: public class Customer { protected String cust_name; protected int card_number; protected double current_bal; protected double credit_limit; public Customer(String ID, int CCN, doubl

  • Asset Issue to Employee Vendor

    Dear All, Scenario to be mapped PO is raised against an Asset. GR is done and It has to be issued to an Emloyee vendor. this has to be shown in inventory in order to issue to a vendor, but it is an asset. How this can be mapped in SAP Regards. Edited

  • Tabular Form - new row at top not working

    I'm trying to add a new row to the top of a tabular form (not manual) vs the bottom using Denes example - http://apex.oracle.com/pls/otn/f?p=31517:215 but it's not working. I absolutely need the records to sort on the date and time, but when I add a

  • Problem in Hyperion Business Rules

    Hi All, I have an urgent requirement. I have a dimension Period with weeks(Wk1,Wk2....Wk52) as level 0 members. I have account member called "Addition". User will enter value for "Addition" in any week say Wk5. I have to calculate "Process" (another