Prelude Ingest don't work as expected with P2 material.

Hi!
I try to ingest my footage from P2 card and this is what's happening.
If I just use Ingest dialog windows with P2 mode like just clicking the card, it shows only less than half of the footage as you can see in 2 images of below.
Ok. So tryed to solve the problem and got to the "folder mode" and marking all clip parts and ofcourse check "stitch clips together mark" and choose Transcode to h264. After that, Media Encoder tells me multiple errors. It shows error box "One or more errors occured during ingest.Please check the..." And event window tells "Transcode task failed. Reason: AME unknown error!" and "Concatenate task failed. Reason: AME unknown error!". Adobe mediaencoder errorlog tells "
- Encoding Time: 00:00:15
02/06/2014 06:50:36 PM : Encoding Failed
Export Error
Error compiling movie.
Unknown error.
So... what can I try next or forget the using Prelude?
Sami

Hi,
Thank you for your post.
The two images you posted represent the different views of Prelude interprets P2 clips. On the 'File Directory" view, it shows much more footages than the 1st image under the same folder, because there are spanned clips for the two shots. When a shot or take is recorded requiring more than the file size limit of a medium, a file-based camcorder starts another file, and continues recording the shot to that file without interruption.
So, you could do the ingest from either view. For P2 clip, prelude imports all of the spanned clips within a single shot or take as a single clip. No need to transcode.
To import a group of spanned clips, select one of them to import all of them. If you select more than one spanned clip, you will import duplicates of the whole group of spanned clips as duplicate clips in the Project panel.
Hope this helps.
Best regards,
Ada

Similar Messages

PageMargins don't work as expected

Hi,
I'm printing a report with the following code:
document.PrintOptions.ApplyPageMargins(new PageMargins(1440, 0, 0, 0));
document.PrintOptions.PrinterName = dialog.PrinterSettings.PrinterName;
document.PrintToPrinter(dialog.PrinterSettings.Copies, dialog.PrinterSettings.Collate, dialog.PrinterSettings.FromPage, dialog.PrinterSettings.ToPage);
However, the margins don't work as expected. If you set thr right or bottom margin, everything is fine. However, if you set left or top, you'll get completely unexpected results.
See this illustration:
http://i33.tinypic.com/2dl8xsi.png
Arrows indicate where whitespace occurs after the margins have been set.
The only margin I want is a margin at the left, but as you can see from my illustration, it's not possible.
Setup: CR2008 SP2, VS2005, C#/.NET 2.0
Regards,
Florian

Thanks, that seems to work much better (even faster).
Here's the code that worked for me:
if (dialog.ShowDialog(this) == DialogResult.OK)
    document.ReportClientDocument.PrintOutputController.ModifyPaperOrientation(pageSettings.Landscape ? ReportDefModel.CrPaperOrientationEnum.crPaperOrientationLandscape : ReportDefModel.CrPaperOrientationEnum.crPaperOrientationPortrait);
    document.ReportClientDocument.PrintOutputController.ModifyPrinterName(dialog.PrinterSettings.PrinterName);
    document.ReportClientDocument.PrintOutputController.ModifyPageMargins(1,1,1,1);
    try
        PrintReportOptions options = new PrintReportOptions();
        switch (dialog.PrinterSettings.PrintRange)
            case PrintRange.CurrentPage:
                options.AddPrinterPageRange(this.GetCurrentPageNumber(), this.GetCurrentPageNumber());
                break;
            case PrintRange.AllPages:
                options.AddPrinterPageRange(1, totalPages);
                break;
            case PrintRange.SomePages:
                options.AddPrinterPageRange(dialog.PrinterSettings.FromPage, dialog.PrinterSettings.ToPage);
                break;
        options.Collated = dialog.PrinterSettings.Collate;
        options.NumberOfCopies = dialog.PrinterSettings.Copies;
        options.PrinterName = dialog.PrinterSettings.PrinterName;
        document.ReportClientDocument.PrintOutputController.PrintReport(options);

Some keys don't work in combination with Shift

Okay so I have the Pavilion Sleekbook 15-b011nr
Serial Number: [Personal Information Removed]
Product Number: C6N92UA
and today I noticed certain keys don't work in combination with the left Shift for example, Shift+S (both left and right), Shift+M, Shift+Z, Shift +X, Shift+C don't work, shift+F does work but gives me this FV. same with j it gives me JM instead. I installed an updated bios, ran a diagnostic test using F2 and under the compenant test for the keyboard it failed and gave me this
keyboard test failed
failure Id # U375BD-6m96P5-MFPX1F-G03B03
product id # C6N92Ua#aba
now while trying to type all this I found other letters now working as well as me not being able to input the semicolon with either shift key. frustrating since I got this laptop in June so it's still under warranty. Has anyone else encountered this problem and if so how do i fix mine? I'm pretty tech savvy so feel free to let me know, or is my only option is a replacement from HP?
Thanks!

Hi hzapata, I know that it work fine, after Load preset, but why You lost the default configs?
Is this my question to Smit.

Safari preferences don't work and opens with tabs that were shut down

safari preferences don't work and opens with tabs that were shut down. what to do?

Quit Safari.
Hold the shift key down and relaunch Safari.
Reset Safari.
Launch Safari
Click Safari in the menu bar.
From the drop down select "Reset Safari".
Uncheck the box beside "Remove stored name and passwords"
Click "Reset".
Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Turn off Extensions if any, and launch Safari.
Safari > Preferences > Extensions
Delete safari .plist file.
Quit all applications.
Option click the "Go" menu in the Finder menu bar.
Select "Library" from the drop down.
Library > Preferences > com.apple.Safari.plist
Right click it and select "Move to Trash".
Restart.

Some links look clickable but don't work - Word 2010 with Acrobat PDF creation

Windows 7
Latest Acrobat subscription
Word - Office home and student 2010
I can create PDFs via Acrobat and Word on Windows 7, but after editing the PDF with Acrobat on Mavericks OS X, only in-document links remain clickable. External web hyperlinks, both exposed URLs and blue text with URLs hidden under link text do not work in the PDFs that are edited on MacOS. They look like they work, because in the PDFs the hand cursor appears and you can click the links, but nothing happens in the browser.
I can't find any troubleshooting information about this.
My process:
Word: Options: Advanced - remove check in "use ctrl-click to follow hyperlinks"
Convert file using the Acrobat tab in the Word ribbon.
Set compatibility to Acrobat 8
Create PDF (icon)
Click Options
Check "create bookmarks"
Convert Word Headings to Bookmarks
Accept defaults, which are:
Convert document information
Enable Accessiblity
Reflow the tagged Adobe PDF.
The PDF is converted. Links all seem to work as expected.
Take the PDF to MacOS Mavericks, add pages, optimize, using Acrobat on MacOS.
Afterward, only some kinds of links in the PDF work.
This is a new problem that seemed to start when I recently began to use Acrobat's subscription version on Windows instead of FoxIt to convert the Word docs on Windows.
Q: Is this a known limitation that MacOS Acrobat creates unusable links despite the initial PDF conversion being done on Windows Acrobat?
Q: Should I do something additional so that external links remain clickable after processing on MacOs?
Thanks for any clues.

Thanks for your reply.
After some experimentation, it seems that the place where *some* links stop working is when I take a PDF file from Windows and optimize it on MacOS with Mac Acrobat Pro. All the links work *except* the kind where the URL is hidden behind blue underlined text. These look like they work but when you click them nothing happens.
So to fix it, I think I need to optimize the PDFs on Windows Acrobat Pro.
The MacOs Acrobat Pro, which I paid many hundreds of dollars for is therefore completely useless for documents with this kind of normal hypertext link.
Also, Windows Acrobat Pro is required in order to ensure that table-of-contents links made in Word (MacOS) continue to work in the PDF. The trick there is to regenerate the TOC on Windows Word before using CreatePDF to convert it.
I hope someone else benefits from this insight, because I wasted weeks of my life trying to troubleshoot this undocumented problem.

Read Key and Write Key not working as expected with paths on RT

The configuration file VIs Read Key (Path) and Write Key (Path) don't seem to work as expected (at least not as I was expecting them to) on an RT target.
When working on my WinXP PC with these two VIs, paths are translated to what looks like is supposed to be a device-independent format before being written to disk. The path C:\dir\file.txt becomes /C/dir/file.txt when writing and vice versa when reading. On my RT target, however, that same path is written to disk as C:\dir\file.txt, unchanged from the native format.
The translaton of a native path to and from the device-independent format appears to be the responsibility of Specific Path to Common Path and Common Path to Specific Path. These both use the App.TargetOS property to determine the operating system. In the case structure for these two VIs, however, there is no case for PharLap or RTX. (My RT hardware is runnng PharLap; I don't know enough about RTX to comment.) This means that the results of String to Path or Path to String are used without translating between the device-independent format to the native path format.
This isn't a problem if you create a configuration file on one machine and use it on that same machine. I noticed this only when tranferring a config file from my PC to the RT target, where the target would not open the file paths it loaded from the configuration file.
This occurs on 7.1.1 and 8.0. I don't have 8.20 to see if happens there, too.

In LV 8.2, this was fixed.
The problem is App.TargetOS returns "Pharlap" on RT systems, and "Pharlap" is handled by the default case ("invalid OS target") in LV 8.0. In LV 8.2 the default case is "Windows 95/NT", however. The reason you could write and read an .ini file on RT in LV 8.0 and earlier is because these two VIs (listed below) were both running the default case of "invalid OS target".
vi.lib\Utility\config.llb\Common Path to Specific Path.vi
vi.lib\Utility\config.llb\Specific Path to Common Path.vi
As you saw, this fails when you perform one operation in Pharlap but the other in Windows. You can fix this by modifying the two VIs listed above. Just go to the case structure and make "Windows 95/NT" the default case.

ServiceDesk software not working as expected with new Firefox version

After recently upgrading to Firefox 5.0, I have discovered that the ServiceDesk software I use with Firefox no longer works as expected. This software is ManageEngine ServiceDesk Plus 8.0. The problem is irratic but unique to Firefox. I don't have this problem with Chrome or IE.
The problem is this: When I open an issue, several fields become active, one of which is the description field where the user who sent the issue typed the description of their problem. When editing the issue and the active fields become active, sometimes this description field is completely blank, meaning their description is gone, but not really. I have to close the page and try to re-open hoping this time, the description will be shown. Also, there is a tab for me to enter a resolution when I want to close it. I cannot enter anything in this field, or rather I can, but when I save it, nothing gets saved to this field, so the user doesn't get to see my resolution. The default font for ServiceDesk is Arial, but I know something is amiss because the default font is Times. If the font shows as Arial, then I know everything will be okay.

I knew I would figure this out as soon as I posted it...
This is the behavior you see if the SamAccountName field is not included.

ArrayDeque as a stack doesn't work as expected with complex objects

Trying to use ArrayDeque as a strorage for complex values <PSList<PSol>> (i.e. Arraylists of structured Values PSol), this doesn't work as expected. The code below should produce different values of pSLWk, being stored on bkStack, which are then to be retrieved by pop() to the variables pSL1, pSL2, pSL3.
However, retrieval only ends up with three identical data sets (variables) pS1,pS2, pS3.
        public PSList<PSol> pSL;
        private ArrayDeque<PSList<PSol>> bkStack=new ArrayDeque<PSList<PSol>>();
        pSLWk=new PSList<PSol>();       // Constructor copies some Array (static field) to the PSLists
        pSL=new PSList<PSol>();
        pSLAux=new PSList<PSol>(pSLWk);   // Constructor copies from existing PSList
        pSLWk.checkResult("pSLWk prior to setDefaults - modifies pSLWk !");
        setDefaults();                                                            // Modifies pSLWk only
        pSLWk.checkResult(" pSLWk after setDefaults");              // .. got changes (o.k.)
        pSL.checkResult(" pSL after setDefaults");                  // .. unchanged (o.k.)
        pSL.checkResult(" pSLAux after setDefaults");               // .. unchanged (o.k.)
        bkStack.push(new PSList<PSol>(pSLWk));                      // store changes in bkStack
        pSLWk.getEl(77).setVal(new StringBuffer("4"));              // change pSLWk again (value 4 @ 77)
        pSLWk.checkResult("pSLWk, after PUSH, THEN modify 4@77");   // .. got change (o.k.)
        pSL.checkResult("pSL after setVal 77");
        bkStack.push(pSLWk);                      // store changes in bkStack
        pSLWk.getEl(80).setVal(new StringBuffer("8"));              // change pSLWk again (value 8 @ 80)
        pSLWk.checkResult("pSLWk after setVal 8@80");               // .. got change (o.k.)
        pSL.checkResult("pSL after setVal 80");
        bkStack.push(new PSList<PSol>(pSLWk));                      // store changes in bkStack
        pSL1=new PSList<PSol>(bkStack.pop());
        pSL1.checkResult("pSL1 after 1st pop");
//      pSL1=bkStack.pop()                                          // Straightforward way doesn't work either...
        pSL2=new PSList<PSol>(bkStack.pop());
        pSL2.checkResult("pSL2 after 2nd pop");
        pSL3=new PSList<PSol>(bkStack.pop());
        pSL3.checkResult("pSL3 after 3rd pSLWk=..pop()");Here the result from the code above:
debug:
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSLWk prior to setDefaults - modifies pSLWk !
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2   63 <C.R.> pSLWk after setDefaults
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.> pSL after setDefaults
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.> pSLAux after setDefaults
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 463 <C.R.>pSLWk, after PUSH, THEN modify 4@77
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSL after setVal 77
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSLWk after setVal 8@80
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSL after setVal 80
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL1 after 1st pop
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL2 after 2nd pop
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL3 after 3rd pSLWk=..pop()
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSLWk prior to setDefaults - modifies pSLWk !
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2   63 <C.R.> pSLWk after setDefaults
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.> pSL after setDefaults
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.> pSLAux after setDefaults
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 463 <C.R.>pSLWk, after PUSH, THEN modify 4@77
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSL after setVal 77
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSLWk after setVal 8@80
1 8 9   4 5 42 9 7 5 2 6 4 923     1 7   3         86   7 5 3 69     2   63 <C.R.>pSL after setVal 80
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL1 after 1st pop
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL2 after 2nd pop
128 96 4635 42 9 7945 2 6 47923     1 7   3 9       86   7 5 3 69     2 4638<C.R.>pSL3 after 3rd pSLWk=..pop()What's the problem with this ?
Rem: I tried the simple approach as well:
bkstack.push(pSLWk);
...

Thank you for your comments, although I see we still don't have a common understanding of the problem.
Firstly, I add the code for the PSList and the PSol classes, so you might find some problem with that:
     public class PSol     {
          private StringBuffer val;
          private int zI;
          private int sI;
          private int bI;
                    // == Konstruktor
          public PSol( StringBuffer v, int z, int s, int b )     {
               this.val=v;
               this.zI=z;
               this.sI=s;
               this.bI=b;
                    // == Getter,Setter
          public StringBuffer getVal()     {return val;}
          public int getZ()     {return zI;}
          public int getS()     {return sI;}
          public int getB()     {return bI;}
          public int getVSize()     {return val.length();}
          public void setVal(StringBuffer v)     {val=v;}
          public boolean hasVChar( StringBuffer ch, boolean delCh )     {
               boolean bT=false;
               StringBuffer fSt=getVal();
               if (!(fSt.indexOf( ch.toString() )     == -1))     {
                    bT=true;
                    if (delCh)     {
                         setVal(fSt.deleteCharAt(fSt.indexOf( ch.toString() )));
               return bT;
     }     // PSol
     public class PSList<E> extends ArrayList<PSol>     {
               /**     Construktor 1: PSList(v,z,s,b) - makes list from single arrays
          private static final long serialVersionUID = 4711L;                         // ### JAVAC Warning! ###
        public PSList (String[] vS, int[] z, int[] s, int[] b) {
               StringBuffer[] v=new StringBuffer[valDim];
            for (int i=0;i<valDim;i++) {
                v=new StringBuffer(vS[i]);
//ArrayList<PSol> pSL=new ArrayList<PSol>;
               for (int i=0; i<valDim; i++) {
                    this.add( new PSol( v[i], z[i], s[i], b[i] ) );
/** Konstruktor2 : makes list from matrix array
public PSList () {
for (int j=0; j<nDim; j++) {
for (int i=0; i<nDim; i++) {
this.add( new PSol( new StringBuffer(sGuiArr[i][j]), i, j , i/locDim + (j/locDim)*locDim) );
                    /**     ------- Construktor 3 : PSList(PSList pS) - makes list as a copy of an existing one
public PSList ( PSList<PSol> pX )     {
               super (pX); // ArrayList-Constructor (Collection)
// get Element <PSol>
public PSol getEl ( int i )     {return get(i);}
     public int getCount()     {return size();}
     public int getTValLg()     {
               int lg=0;
               for (int i=0; i<getCount(); i++)     {
                    lg=lg + getEl(i).getVal().length();
               return lg;
                    /**     ------- checkResult()     -     Check if alll elements are single char +dump
     public boolean checkResult(String messg)     {
               boolean allOne=true;
               for (int i=0; i<size(); i++)     {
                    if ( getEl(i).getVal().length() > 1 )     {
                         allOne=false;
                         System.out.print(" ");
               else     {
                    System.out.print(getEl(i).getVal());
               System.out.println("<C.R.>"+messg);
               return allOne;
     }     // Class PSList
Secondly, I don't really see what you mean by pointing out to 'only one "pSLWk" instance of PSList'. The variable pSLWk is the variable to be worked upon; after some change of the contents, I want to save this state of contents to the stack. When I pop that variable from the stack, I wouldn't want to restore it to pSLWK, but to some other variable, e.g. by public PSList<PSol> pSL1;
pSL1=new PSList<PSol>(bkStack.pop());Again - to my understanding (which comes from old days of microprocessor coding... - there shouldn't be a need to know how the data came there, or what was the name of the variable who stored it there. And : the implementation of ArrayDeque returns 'elements' of class E, not references !
Thirdly, you're right, that the method of using a copy constructor for retrieval looks 'weird'. However - I had some other versions that didn't work either, e.g. the straightforward one, as I pointed out.
And fourthly: yes, I'm almost sure that I'm messing up something somewhere. I went to this forum hoping to clarify that ... :)
If you don't mind, could you please sketch a few lines of code, how to 'push' a complex variable to a ArrayDeque stack, and retrieve it - by 'pop()' - to some to other variable of the same class later ?
Might make our discussion much easier, to see how things REALLY work.
Thank you !

Second Level Subdomains | wildcard domains on Azure don't work as expected

Hi,
We're having issues with the Custom Domain functionality of Azure Websites.
In short, a wildcard CNAME record has been set up to point to the Azure Website instance:
*.mydomain.com -> mydomain.azurewebsites.com
In Azure portal, in the custom domains section, the wildcard is also set up with a valid entry
e.g. *.mydomain.com (record in custom domains section).
Problem:
visiting www.level2.mydomain.com results in a 404 error from Azure 'Error 404 - Web Site not found!' etc.
Every other single-level subdomain gets through fine e.g. level1.mydomain.com is fine.
Question:
Are we doing something unsupported here?
Thanks in advance,
H

Hi Petr,
Many thanks for your response!
With the knowledge that double wildcard certificates are not supported with Azure Websites, I set up a simple test to see if second-level subdomains would work on Azure Websites
without SSL.
Test:
- a template MVC5 app, no SSL endpoint binding and a single custom domain *.mydomain.com.
- Home controller index action with a simple redirect to another site
- published to a Shared Azure Website instance
- DNS entry from *.mydomain.com to <azurewebsitename>.azurewebsites.net
- wait for everything to propogate
Result:
- 'Error 404 - Web Site not found!' on Azure when navigating to www.secondlevel.mydomain.com
- Successful redirect when navigating to random.mydomain.com (where random is
not an explicitly mapped subdomain in the DNS service: therefore, wildcard catchall is working as expected for single-level wildcard subdomains)
Assessment:
The non-support of second-level subdomains is not restricted to the fact that Azure Websites don't support double wildcard certificates? The issue extends to Azure Website's non-support of double wildcard Custom Domains?
Thanks,
H

Financial Reporting - don't work condition "starts with"

Hi All,
I want exclude rows from report where dimension members name start with "9", I try suppress row with condition "starts with", but this don't work.
When I explore Conditional Suppression feature I got positive take only for "contains" condition.
Please help me how I can exclude rows from my report.

I make sense, condition "starts with" work perfect, error in hierarchy on my dimension.
Hyperion Financial Reporting the best :8}

FLV Playback controls don't work as expected

Hi
I have a FLVPlayback component that I feed with flv through
the url paramterer.
The movie loads and play fine, but I the controls do not work
as expected.
Eg. If the movie has ended I can not rewind and play it again
(without reloading the host page)
Does anyone know whats wrong here?
Thanks in advance
T

Hi
I have a FLVPlayback component that I feed with flv through
the url paramterer.
The movie loads and play fine, but I the controls do not work
as expected.
Eg. If the movie has ended I can not rewind and play it again
(without reloading the host page)
Does anyone know whats wrong here?
Thanks in advance
T

Http cache don't work as expected in an applet

Hi, everyone!
I write an applet which dynamic connect a http server and fetch content from it. I wish the content could be cached in browser's cache system.
Here is my code, it's work well in MS JVM, but when I turn to sun plugin, the cache system don't work. Every time I get a Response code 200 ( wish to be 304)
==================My code================================
URLConnection conn=(URLConnection)url.openConnection();
conn.setUseCaches(true);
conn.setAllowUserInteraction(false);
conn.connect();
java.io.ObjectInputStream ois=null;
Object o=null;
try
ois=new ObjectInputStream
(new java.util.zip.InflaterInputStream(conn.getInputStream()));
return ois.readObject();
finally
if(ois != null)
ois.close();
==================My code================================
I tested on sun JDK 1.42 and IE6.
My Http Server is Jetty ,and I do have add a last_modified tag in http response.
I look into the Java plugin control panel ,only the jar file is cached.

Sorry for the confusion, of course you are right and it seems to be a bug.
I ment that the method name setUseCaches itself might be confusing because it does not force caching, it just allows it when available.
There are several bugs about the plugin caching (4912903, 5109018, 6253678, 4845728, ...) even if they might not fit 100% to your problem they show that plugin caching is an issue which sun really should improve.
You might have a look at them and vote for them or submit a new bug.

Paint of Focus don't work on Buttons with Borders/or opaque Buttons! Why?

Hi, if I use the Metal Look&Feel Buttons with Borders (RaisedBevelBorder) never paints the focus, under the Windows L&F only raised TextButtons don't paint.
The default of true for the value FocusPainted is unchanged
and they are all in the FocusTraversePolicy (without Borders it works fine).
If you set Buttons or the surrounding panel with images or text opaque (without Borders) you face similar problems.
This may caused by the reason that the layer, which is needed for the paint of the focus is never painted.
But that's not the behavior I expected.
Has anyone a clue to solve this problem or is it a bug?
Greetings Michael

Hi, I have modified your program a little bit to demonstrate the problem. Please replace the gif with any small image.
setOpaque doesn't make any problems -- sorry (The focus seemed to be consumed by my Background).
But the problem seems to be, if you shrink the buttons to their preferred sizes (That may the cause why the focus isn't so good visible, if you use pack).
In my example it makes no difference.
Thanks for your help.
I'm looking forward to your reply.
Greetings Michael
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.border.*;
public class ButtonTest extends JFrame
    public ButtonTest()
        JButton button1 = new JButton("Raised Bevel Border");
        button1.setBorder( new BevelBorder(BevelBorder.RAISED) );
        //button1.setOpaque(false);
     setContentPane(new JPanel());
     // The panel shrinks the Button and that seems to be the clue
     JPanel p1 = new JPanel();
     p1.add(button1);
        //getContentPane().add(button1, BorderLayout.NORTH);
     getContentPane().add(p1);
     //JButton button2 = new JButton( "Default Border" );
     ImageIcon icon = new ImageIcon("add.gif");
     JButton button2 = new JButton( icon );
     // That's important, the shrink prevents also the paint of the focus.
           button2.setPreferredSize( new Dimension(icon.getIconWidth(), icon.getIconHeight()) );
        getContentPane().add(button2);
    public static void main(String[] args)
        ButtonTest frame = new ButtonTest();
        frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
        //frame.setSize(200, 100);
        frame.pack();
        frame.setVisible(true);
}

Albums don't work as expected

New to itunes and am importing my CDs...
1) An album like Actually where the artist is always Pet Shop Boys groups as one album as expected.
2) An album like Into The Woods, various artists, does not group at all (all individual songs are not in same album).
3) Some albums with various artists do group together under the same album correctly (not many).
Question 1) Particularly for #2 above, how do you get albums to group together correctly?
Questions 2) What does the 2nd column (after the art work) mean? It has a number in it, and for albums that group correctly, it makes sense, track 1, 2 etc. For for albums that don't droop, I will have a long song that says 15 for that number. There is a number column for track #. Additionally, the 2nd column cannot be hidden.
Thanks!
bob

See this: Why aren't songs with the same album art grouped together? http://support.apple.com/kb/TS1468

After restoring 5S from 5, notifications from many news APPs don't work (no problem with my iphone 5 running iOS 7.0.2)

I used iphone 5 and have updated it to iOS 7.0.2. Everything worked with it. I can receive all the notification from news APPs.
After receiving iphone 5s, I set it up by restoring the backup from iphone 5. However, not all APPs were synced. Also, many notifications are not working especially with the news APPs I was using.
The notification of those APPs affected are turned on in the notification center.
I have restored iphone 5S to factory setting and set up again, but still not all the notifications are working.
What should I do?

A workaround is to reinstall lazy apps, mostly for those that were restored but don't appear on notification center, eg. Whatsapp. In my case I have more than 500 apps installed.
We need a correct solution for this problem.
I also had this problem on the past moving from 4s to 5.
And now from 5 to 5s.
The only notifications working after restore in my iPhone are those from Facebook.

Prelude Ingest don't work as expected with P2 material.

Similar Messages

Maybe you are looking for