Prelude Names not showing up in premiere

Hi,
When I make subclips in Prelude then make a rough cut and send that to premiere, the subclip names do not carry over to Premiere.

Is it possible you only have the Rough Cut selected when you do the Send to Premiere Pro? Try selecting the Rough Cut and the Subclips and then do your send.

Similar Messages

HT1451 Why do the song names and cd name not show up on the IPod Shuffle?

Why do the song names and cd name not show up on the Shuffle?

MysticChyk wrote:
Why do the song names and cd name not show up on the Shuffle?
Err this is no longer April 1st you know.
The iPod Shuffle has never had a 'display' on which track names can be shown. See http://www.apple.com/ipod-shuffle/ if you want an iPod which does have a display on which you can see the tracks names and even the album cover art then look instead at the bigger and more expensive iPod Nano http://www.apple.com/ipod-nano/ or iPod Touch http://www.apple.com/ipod-touch/
PS. The current iPod Shuffle even though it has no display on which it can show the track names can read them out loud to you using a voice-synthesiser this is the VoiceOver feature described on the iPod Shuffle product page I listed above.

After effects color corrected clip not showing correctly in Premiere

Hello all,
I have recently made a short film with a few effects in Premiere and After effects CS4. I have used the Dynamic Link to accomplish this. I have added color correction with Color Finesse in After effects. The problem is I some of the color correction is not showing up in Premiere once it has finished. Some of them are adjustment layers and some are not and the ones that are showing up are diverse like that as well. I have rendered the footage and rendered the premiere time line, it fixes it at first but won't build a DVD the right way then the fixes just seem to disappear when scrolling through the timeline.
Is anyone else haveing this problem?
Do you think it's something wrong that an update will fix?
Maybe a new codec?

Describe the exect DL steps you took.

AVCHD 1080p50 not showing up in Premiere Elements 11

I have Premiere Elements 11, which, according to what I have read, supports editing 1080p50 (or 60 in NTSC). When I create a project it is not showing up in the list of available presets. See the available list below:
Checking the installation directories, I can see that the preset is actually installed on the computer. Screenshot below:
Comparing the two lists, all of the presets are available, except the 1080p 50. The preset has GUID 088bb726-9823-467e-b3b7-26f3703d4cf1, which is included in the Adobe Editing Modes.xml as EditingMode24, enabled on all platforms. I was going to attach both the preset and the editing modes xml to this question, but there doesn't seem to be a way to do that. They are both reasonably large files, so I am posting below only the definition of EditingMode24. I can post the contents of the preset as well, if required. I am on Windows 7 64bit.
<EditingMode24 Version="2">
<EditingMode.SupportedPlatforms Version="1">
<EditingMode.SupportedPlatformCount>1</EditingMode.SupportedPlatformCount>
<EditingMode.SupportedPlatform Version="1" Index="0">
<Second>true</Second>
<First>All</First>
</EditingMode.SupportedPlatform>
</EditingMode.SupportedPlatforms>
<EditingMode.IDs Version="1">
<EditingMode.IDCount>2</EditingMode.IDCount>
<EditingMode.ID Version="1" Index="0">
<Second>088bb726-9823-467e-b3b7-26f3703d4cf1</Second>
<First>All</First>
</EditingMode.ID>
</EditingMode.IDs>
<EditingMode.Names Version="1">
<EditingMode.NameCount>7</EditingMode.NameCount>
<EditingMode.Name Version="1" Index="0">
<Second>AVCHD 1080p Quadratpixel</Second>
<First>de_DE</First>
</EditingMode.Name>
<EditingMode.Name Version="1" Index="0">
<Second>AVCHD 1080p square pixel</Second>
<First>en_US</First>
</EditingMode.Name>
<EditingMode.Name Version="1" Index="0">
<Second>AVCHD 1080p píxeles cuadrados</Second>
<First>es_ES</First>
</EditingMode.Name>
<EditingMode.Name Version="1" Index="0">
<Second>AVCHD 1080p - Pixels carrés</Second>
<First>fr_FR</First>
</EditingMode.Name>
<EditingMode.Name Version="1" Index="0">
<Second>AVCHD 1080p pixel quadrati</Second>
<First>it_IT</First>
</EditingMode.Name>
<EditingMode.Name Version="1" Index="0">
<Second>AVCHD 1080p 正方形ピクセル</Second>
<First>ja_JP</First>
</EditingMode.Name>
<EditingMode.Name Version="1" Index="0">
<Second>AVCHD 1080p 정사각형 픽셀</Second>
<First>ko_KR</First>
</EditingMode.Name>
</EditingMode.Names>
<EditingMode.Players Version="1">
<EditingMode.PlayerCount>1</EditingMode.PlayerCount>
<EditingMode.Player Version="1" Index="0">
<Second>9728470B-5EE7-4e96-9921-630DEA0AF639</Second>
<First>All</First>
</EditingMode.Player>
</EditingMode.Players>
<EditingMode.Recorders Version="1">
<EditingMode.RecorderCount>2</EditingMode.RecorderCount>
<EditingMode.Recorder Version="1" Index="0">
<Second>7D3215DB-D698-4977-9602-7DC209B0D6B1</Second>
<First>Mac</First>
</EditingMode.Recorder>
<EditingMode.Recorder Version="1" Index="0">
<Second>AE351743-B529-451e-A2D4-9CCF1AD8D8B6</Second>
<First>Win</First>
</EditingMode.Recorder>
</EditingMode.Recorders>
<EditingMode.FrameRect1 Version="1">
<Width>1920</Width>
<Height>1080</Height>
</EditingMode.FrameRect1>
<EditingMode.FrameRect.Count>1</EditingMode.FrameRect.Count>
<EditingMode.FrameRate1 Version="1">
<Numerator>24000</Numerator>
<Denominator>1001</Denominator>
</EditingMode.FrameRate1>
<EditingMode.FrameRate2 Version="1">
<Numerator>30000</Numerator>
<Denominator>1001</Denominator>
</EditingMode.FrameRate2>
<EditingMode.FrameRate3 Version="1">
<Numerator>25</Numerator>
<Denominator>1</Denominator>
</EditingMode.FrameRate3>
<EditingMode.FrameRate.Count>3</EditingMode.FrameRate.Count>
<EditingMode.PAR1 Version="1">
<Numerator>1920</Numerator>
<Denominator>1920</Denominator>
</EditingMode.PAR1>
<EditingMode.PAR.Count>1</EditingMode.PAR.Count>
<EditingMode.FieldType1 Version="1">
<Value>0</Value>
</EditingMode.FieldType1>
<EditingMode.FieldType.Count>1</EditingMode.FieldType.Count>
</EditingMode24>
I have noticed that this editing mode does not have a frame rate of 50p, whereas some of the other EditingModes do. Is that what is causing the problem?
Any help with this is much appreciated.

VDOSurfer
Please excuse if the following has been brought up here or in the other thread that you referenced. I have been exploring and experimenting with this issue of the "Premiere Elements 11 Windows missing AVCHD 1080p50" that some users have run into and thought that I would post my findings here just in case.
A user in France reported the problem, same syndrome, PAL AVCHD 1080p50.sqpreset in the program files, but not showing up as a choice in Premiere Elements 11 new project dialog. Program installed with French as language. I received a copy of the file to study. Except for it having more preset choices than I did, the Notepad document was identical to what I had in my Premiere Elements 11 Windows. Without resorting to your downloadable version, I was able to correct the problem by removing all the descriptions from the "bad" document, copying the same section with seemingly identical script from the "good" document, and then pasting the latter into the "bad" document. Correcting the occasional typing errors in the document, example 1 920 and 080, and removal of several descriptions/languages that I did not have in my copy had no impact on the issue.
Right now the project presets that you have posted appear to be the answer to this problem until Adobe gets around to addressing it. As for those who would like the displayed readouts associated with the preset to agreed with the preset properties, I have posted the following at the other forum that I frequent. The response was addressed to the user in France who was great in follow up.
Here is more information on what was your Premiere Elements 11 Windows missing PAL AVCHD 1080p50 project preset.
If you want VDOSurfer’s PAL AVCHD 1080p50.sqpreset file as the replacement for the file that came with your Premiere Elements 11 Windows
a. to be included and displayed in the Premiere Elements 11 Windows new project dialog listings of choice
and
b. to have the descriptions (new project dialog as well as the Edit Menu/Project Settings) agree with the PAL AVCHD 1080p50.sqpreset file,
then you need to edit further the Notepad document for VDOSurfer’s PAL AVCHD 1080p50.sqpreset file in the following two places in the Notepad document.
1. Where you see
<EditingModeGUID.Win>d10b5335-ce74-4031-bc7c-79e8b73582ee</EditingModeGUID.Win>
<EditingModeGUID.Mac>d10b5335-ce74-4031-bc7c-79e8b73582ee</EditingModeGUID.Mac>
CHANGE TO
<EditingModeGUID.Win>088bb726-9823-467e-b3b7-26f3703d4cf1</EditingModeGUID.Win>
<EditingModeGUID.Mac>088bb726-9823-467e-b3b7-26f3703d4cf1</EditingModeGUID.Mac>
2. Where you see
<VideoFieldType>1</VideoFieldType>
CHANGE TO
<VideoFieldType>0</VideoFieldType>
Also, if you have a PAL AVCHD 1080p50 file, add it to the project, and drag it to the Timeline, you will now find the project will automatically set the project preset and that project preset and description will be for PAL AVCHD 1080p50 settings.
Also be aware that VDOSurfer’s download descriptions in some cases maintain certain references to the word interlaced, presumably because he edited a Notepad document for an interlaced project preset to get his progressive 1080p50 offering. But, I have found that they do not make a difference in arriving at the above. This aspect of his document can be edited further, replacing “interlaced” with “progressive” in each of the languages offered. But I do not see the purpose in the latter at this point.
There remains many unanswered questions in pin pointing the core of the issue of the missing AVCHD 1080p50 project preset run into by some users. Particularly frustrating is trying to find differences between the Notepad document for the situation that will not work with that which will. Often the documents look identical except for perhaps a 1 920 x 080 instead of a 1920 x 1080. But those typo errors do not answer the "whys" as far as I am concerned since correcting them does not correct the problem at hand.
Until Adobe gets around to clarifying and/or correcting the situation, the work of VDOSurfer, contributions of thers, and the few suggestions that I have made for seeing more appropriate display of settings should keep things moving along. Focus export settings.
ATR

Contact name not showing in call/sms log even when I call/sms from my address book.

Two things have changed on my phone recently.
1. I ran the latest update 4.3.2
2. My phone was not showing all the contacts in my address book that is in my Mobile Me account. Mobile me had 166 contacts. The iPhone 4 had 136. I I unchecked the syncing of my contacts on my phone. This removed all the contacts from my phone. Then I check the syncing options again. All 166 appeared on the phone.
I'm not sure which of the two caused the issue but now anytime someone who calls their name does not appear on the display or log, just their number. I can even call people from my address book and the display shows that I am calling them with their name and photo on display. However, in the call log the name does not show just their number. This applies for text messages. I send a message directly from within the contact card in the address book and in my text log it shows only the number and not the name.
I've turned the phone off and on a couple of times.
I would appreciate any advice.
Cheers

Thanks iraghib,
In the end I reset my phone to factory settings. I created a back up of my address book and ical. Reset the phone and did a sync again. This fixed it all. I didn't need to use the backups but is was nice to know they were there. I felt entering the various passwords for all my installed apps was a much better deal than adding the international area code to the 166 contacts I have in my address book.
Good luck. And thanks for the post.

External Hard Drives not showing up in Premiere Pro Media Browser

Hello All! My external drive(s) aren't showing up in Premiere Pro... and yes, they were working just fine yesterday. The internal drives both show up, but the external drive(s) aren't accessible.
At first I thought that perhaps it was the drive (a new USB 3.0 that worked yesterday)... I tried changing the cable, changing the drive, even changing from a USB 3.0 drive to a FW 800 drive. All show up on my desktop, as well as in other applications (including After Effects, and "other" editing platforms) etc... but none are showing up in Premiere Pro.
FWIW, I tried in both Premiere Pro CC as well as Premiere Pro CS6. I have tried rebooting the computer, creating new projects, holding down the option key while starting Premiere, using Digital Rebellion's CS Repair... all to no avail. Any thoughts?
My system is a MacBook Pro (late 2011), 2.4 GHz Intel Core i7 with 16 GB Ram, running Mac OS X 10.8.5
Thanks in advance for any assistance.
-- Sue

Hi Sue_Lawson,
Welcome to Adobe Forums.
Please try to enable a root user by following the below link
http://support.apple.com/kb/ht1528
Try to check in Premiere Pro CC as well as CS6 whether your external hard drive is recognized or not.
Thanks

Server name not showing up in Chooser

mac OS 10.1.3 server. The server name is not showing up in the Chooser,. I can get to it by typing in the IP address, but this is a pain for my teachers.
It showed up for a long time, but now it will not show up.
Any ideas?

Apple talk is on the server and the clients. I also have another server that is connected to the same switch and it can be seen in the chooser. So I do not think it is a config problem with the switches or hubs. I have not changed anything (that I know of). I have researched this and can not find anything on it.

Account name not showing in 'Partners' Block for sold to party and ship to

Hi Experts,
I created a return order by confirming the Account.
Under 'Partners' Sold-to-party, ship-to-party, activity partner showing the account name but when i clicked on any of these links it is not showing the BP name.
Please suggest why it is not showing the BP name inside the sold-to-party,ship-to-party, activity partner.
Thanks in Advance,
Kishore

Hi Experts,
I created a return order by confirming the Account.
Under 'Partners' Sold-to-party, ship-to-party, activity partner showing the account name but when i clicked on any of these links it is not showing the BP name.
Please suggest why it is not showing the BP name inside the sold-to-party,ship-to-party, activity partner.
Thanks in Advance,
Kishore

Chapter name not showing up in Scene Selection

I have an iMovie 9 project that has three chapters. I've used the Chapter Markers to delineate where they begin and what their names are.
I've sent the finished project to Media Browser and then I go to iDVD to burn the project successfully and all seems well.
The trouble is, the first chapter's name is not showing up in the Scene Selection. It's just listed as "The Beginning" instead of the name I've given it. I checked it in the preview function before I burn the DVD, and it's not there, either. The other two chapters' names show up successfully.
Can anyone help me here? Thanks.

I just made sure that the Chapter Marker was at the very beginning of the clip, and that seemed to have solved the problem.

Contact names not showing in messages, only number

nokia 6121 no names will show when ringing or recieving texts so I dont know who they are from etc, very frustrating, how do I change it to show the contact name not number? I cant find any settings to help me? thanks

Hi, In such case, try to check the things below:
1> Make sure all contacts are stored in unique memory : sim or phone memory (recommend phone memory)
2> Try to avoid 1 contacts has few numbers and other case, similar or same names for fews contacts
3> Add your country code into the normal number format, eg: 0123455678 --> saved as +60 12345678 (+60 is the country code for MY)
4> Check the settings under Contacts folder: Contacts > Settings > Contact view or Display contacts > try to change Last name/ First name view option one by one

Picture names not showing in iphoto+mail

I recently updated to ilife ´08 and can´t figure out how to get the actual data names to show. I don´t sant to see titles,ratings and keywords.. I want to see the actual names of the pictures. Also when I hit the mail button in iphoto the pictures are put in the mail... without the pictures name. If I drag and drop the pics to a desktop folder the names ar5e of course correct. But many of the people I send mails to are not even aware how to drag and drop. If I send someone an email with 40 pictures to chose from,I want them to see the names underneath the pictures in the email without having to drag and drop. This was always how it worked in ilife ´07 and it makes choosing the pictures and telling me which ones they want in high quality a very easy process. I can´t even figure out how to sort the photos by "NAME". If there is no way to change it then I will be going back to the older version. Sometimes "improvement" is not a good thing.
Does anybody know how to do this?

When you select a pic to Email in the iPhoto Window and hit the email button you have the option to include title and comments with the photo.
Uploaded with plasq's Skitch!
In iPhoto you have two concepts that are related:
Title is a name that you give to a photo in iPhoto
Filename is the name of the file that contains the photo.
Which are you referring to when you say "name"?
Regards
TD

Vignette in Speedgrade CC not showing up in Premiere CC via Direct Link

I used the Direct Link to SpeedGrade and did some color correction on some ProRes MOV files and added another Primary color correction with a vignette. When back in Premiere, the color corrections are fine but the vignette doesn't show up. Also, the vignette doesn't show up where the widget is placed. I have to move the mask widget to the left of the frame for the vignette circle to be in the center of the frame.

The footage is a 2K ProRes MOV scaled down. The vignette is still not showing up on the adjustment layer in Pr.
The weird thing is, in SpeedGrade, the vignette widget doesn't line up correctly on screen. I have to shift it way to the left out of frame for the vignette to line up correctly. Any ideas why this is happening? The Pr comp size is 640x640. Maybe that is effecting the vignette.
Apple Power Mac
OS X 10.9.3
2 x 2.93 GHz 6-Core Intel Xeon
29 GB 1333 Mhz DDR3
Pr CC 7.2.2
Sg CC 7.2.1x100

LMS 4.2.3 variable name not show in drop-down list

Hi all,
I am trying to use performance threshold to trigger a script whild device CPU or Memory high.
There is a default threshold template called "CPU Utilization" and "Memory Utilization".
After I choose either one, there should be one or two variable name in drop down list.
But I only see "Select MIB Variable" in the list.
I try to create a template with exact the same variable but still got nothing in the list.
The strange thing is that no all the default template has this problem.
I can see variable name under some template like "Device Availability" or "Port Availability"
And this is not browser problem because I try both IE and Firefox.
Any one how to solve this?

Thanks for your advice.
Now all my devices are connected in Layer View [Devices View], but User Tracking still not shows me informations from several switches about hosts. Its works like randomizer. Now 5 devices form User Tracking don't show me informations.[WS3550 2 devices and 2 WS-C2960S-48LPS-L]. In lists devices Acquisition Action i check acquisition for this 5 devices. After that acquisition complete, but User Tracking still empty ( all ports on this devices are active).
SNMP, Credentials all is good.
I try resolve this problem many days, but without results. Its semmes like a bug.
ANy propositions?

Blackberry Pearl 8120-contacts names not showing

I just upgraded to this phone and half the time when my phone rings contact names do not show up, just the phone number. What's going on?

Do you have those names/numbers in your BlackBerry Adress Book?
also, read this:
There could be any one of three solutions... Try these:
1. Make sure you set your own country code at Phone Dialer Screen > Options > Smart dialing.
Set your country code in this format: "+xx" where xx = your country code. Some countries have two or three digit Country Codes. Do not place the '+' in your contact's entry.
* In the US, set this Country Code as "+1", and place your loca area code in the proper box (this normally the default setting in a new BB).
2. At the same location, change the National Number Length to the number of digits for your country (since some countries will have less than 10 as set as the default in the BB). Find out the total digits, minus the country code. Do not place the '+' in your contact's entry.
* For example, some countries have a total number to 8 (plus 3 for country code). You would enter "8".
3. You may have "Content Protection" set on your Address Book.
Look at Options > Security > General Settings. Scroll down to Content Protection > Include Address Book = NO.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Host name not showing up under Active Clients

When I go into my router and check active connections, I can see all host names like "Acer Laptop", "IPhone" etc..., IP and MAC address' that are connected to router. Today, when I was in there looking, I saw an asterisk where host name should be for the TouchPad. (it took me a while to figure out it was the TouchPad) Is there a reason why Host name would not show up?
I have gone into "Device Settings" and set "Name" as "Chucks TouchPad". Is that the host name that should be showing on router?
Thank You for any assistance.
Post relates to: HP TouchPad (WiFi)

Sure is, but it will involve some commandline work. First, you're going to need to install the SDK. You only need the Novacom part of the SDK, but AFAIK there's no seperate download for Windows... you have to get the whole thing. The SDK is available here: https://developer.palm.com/content/resources/develop/sdk_pdk_download.html
Next, you're going to need to enable Developer mode on your TouchPad, here's how to do that:
Start a Just Type search and enter webos20090606
A Developer Mode icon will display, tap it
Tap the toggle switch to turn it On
Leave the password blank and tap Sumbit
Close the Developer Mode app
Now, connect your TouchPad to your computer. Next, you're going to find a file called Novaterm.bat. It's buried in the install directory of the SDK. I don't remember the exact path (I don't use Windows anymore) but it's something like C:\Program Files\Palm SDK\Current\bin (keep digging around for bin folders in the C:\Program Files\Palm SDK path and you'll find it eventually). Doubleclick that to start a nice little terminal app. Choose your TouchPad from the drop down list and click connect.
Now, time for some command line stuff. Run the following commands in the terminal:
mount -o remount,rw /
cd /etc/dhcp
vi dhclient.conf
Press the I key on your keyboard to go into edit mode (this is a Vi specific thing)
Remove the # at the beginning of line 14 and change the andare.fugue.com inside the quotes to whatever you want your TouchPad reporting as. For example: #send host-name "andare.fugue.com"; would become send host-name "RidiusTouchPad";
To save your changes, hit the ESC key (to exit edit mode), then type :wq and hit enter. Note there is a colon in there. Again, this is Vi specific stuff.
sync
mount -o remount,ro /
Once you've done this, disable and re-enable your Wi-Fi and your TouchPad should be reporting a hostname. Kind of a lot of work if you ask me (unless you already have the SDK installed).

Prelude Names not showing up in premiere

Similar Messages

Maybe you are looking for