Prelude source file is missing

Hi...
I'm trying to add preludes at both the module and member level to a C++ GUI project.... and keep getting this annoying error "Code editing problem: the prelude source file is missing".
Has anybody solved this one ?
I can't find a way to generate such a file, although I found a template for such a file under the examples. I can workaround it by deleting my main source.cpp file and regenerating it... as long as I keep saving the .dt file I don't seem to lose any of my preludes.....
Thanks.... Marty

It is ZEBS (Electronic up load of bank statement)
Regards,
Chansa

Similar Messages

Need to re-burn a DVD, but some source files are missing. But Media Cache folder has them all.

hi all. I have PE3 and the issue is this: I needed a DVD of a project I'd completed a year ago, and I didn't have an old copy of the DVD. So I decided to re-burn it. But on opening the project, it seems some of the source files have been misplaced on my computer, so it says 'media offline'.
I figured I'd still be able to burn it though, because the Media Cache folder contained all the required files...
However it starts to burn the DVD and then stops at 49% saying transcoding error.
Q1: can you still burn a DVD if it says 'media offline' but you know all the source files are present in the Media Cache folder?
Q2: what's the transcoding error?
thx

The Media Cache folder contains files that are only of use to PE during internal editing and will NOT solve your lost video problem.
Once a Project is completed, that have no outside value.
The contents are CFA and PEK files, which is the Conformed Audio and Waveform Display, respectively (no video here to my knowledge).
And I'm not aware of any way to make them useful (outside of PE).
If you happen to have your Project and source video/audio files intact, and then delete the contents of the Media Cache folder, upon re-opening the Project, PE will regenerate the CFA and PEK files. Again this is only if you have the Project and all the source files (Assets)...

Missing Source files when exporting to Soundtrack and LiveType

An extremely frustrating "glitch" has occurred. When exporting to LiveType or Soundtrack, I receive and error message telling me that one or more of my source files are missing. I had been editing with these files in FCP 5 for the past few days with no problems. Initially I had no problem exporting to LiveType. Yet, today when I exported to Soundtrack Pro and subsequently LiveType, my source files just disappear. I have found some references to this issue in the discussions, but found no solution. If someone has found a solution since the last posting, please inform of it.
Demetrius

Export the clip using current settings.
Then open that in LT, and work with it independently.
Then export is and import it into FCP and use it to replace the original clip in the sequence.

Error: missing ] after element list Source File: javascript:%20[object%20XULElement] Line: 1, Column: 9 Source Code: [object XULElement]

Can you help me out in letting me know what this means and how I can fix this? I found it in my tools menu under error console. It was listed as a warning, but then there was a option to highlight and evaluate the original warning message that was listed as
Warning: Expected color but found 'null'. Error in parsing value for 'background-color'. Declaration dropped.
Source File: http://www.msn.com/
When I cut and pasted message in the code evaluate box and pressed enter the warring message became an error then stated:
Error: missing ; before statement
Source File: javascript:%20Warning:%20Expected%20color%20but%20found%20'null'.%20%20Error%20in%20parsing%20value%20for%20'background-color'.%20%20Declaration%20dropped.%20Source%20File:%20http://www.msn.com/%20Line:%200
Line: 1, Column: 10
Source Code:
Warning: Expected color but found 'null'. Error in parsing value for 'background-color'. Declaration dropped. Source File: http://www.msn.com/ Line: 0
I am writing to ask for guidance on what to do and how to fix this.
I current have Firefox as my default browser. I have IE 9 and Windows 7 home ed on my HP lap top that has AOL preloaded into it as the mail provider. I am a beginner user and when I got the computer my cousin set up Mozilla and Firefox as a search browser and I like it.
I also have norton security

I think, the problem is with the order (in configuration file) of path to search headers:
     /opt/oracle/product/10g/10.2.0/precomp/admin/pcscfg.cfg
          sys_include=(/usr/include,/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include)
          include
          include=(/usr/include)
          include=(/opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include)
In the filesys:
     ./usr/include/sys:
     -r--r--r-- 1 bin bin 17786 Aug 13 2007 types.h
     ./opt/freeware/lib/gcc/powerpc-ibm-aix6.1.0.0/4.2.0/include/sys:
     -rw-r--r-- 1 root system 18288 Mar 22 2008 types.h
     mode_t came from:
     #include <sys/types.h>
sys/types.h:
     * POSIX Extensions
     typedef unsigned int uint_t;
     typedef unsigned long ulong_t;
     * POSIX and XOPEN Declarations
     #if defined(_LP64) || defined(_I32LPx)
     typedef uint_t mode_t; /* file attribute type */
     #else
     typedef ulong_t mode_t; /* (historical version) */
     #endif

I cannot get my photo to print for this reason -there is a photo in this print job which is missing its source file

I'm working in lightroom to print cards with a custom print size. When I set up the printer I get a message that reads "There is one photo in the print job which is missing its source file". The preview shows my card as blank. What is wrong?

I would believe what the message is saying, that a photo is missing. Do you know what photo you're trying to print, and if you look at this photo in Library, does it have a question mark on the thumbnail or other indication that the preview is there but the master photo is gone/moved?

Missing source files

Hello
I've noticed that some of the music in my iTunes library are no longer linked to source files. It says "the original file could not be found". How can I get a complete list of the songs in my library that are no longer linked with their source music files?
Thank you
Doug

"An error has occurred while creating the article.
Source files for one or more article layouts are missing."
I experienced this error message–obstacle as well, when uploading my Folio to the Folio Producer. I was able to resolve it. One of my articles had verbiage which included an email address or the URL of a few websites in my iPad Vertical layout and my iPad Horizontal layout. My error existed due to the fact that not all of the email address and URLs of the websites were set as hyperlinks yet. To correct the error, I highlighted each email address and each website address missing hyperlinks, and from the Hyperlinks Panel selected: New Hyperlink or New Hyperlink from URL. The email addresses and the website addresses became active and visible in the Hyperlinks Panel showing an envelope or active link icon. I saved the article document and loaded it back into the Folio Builder. Then selected the Folio and Uploaded it to Folio Producer!

Imovies error message missing source file

I dragged event file in imovies into a project file. Now I cannot open them an error comes up 'source clip is missing'. The videos are there but will not play. Everything is deleted from my trash. How do I fix this

Thanks to LoveFX4's search here: [https://support.mozilla.com/en-US/questions/801219 https://support.mozilla.com/en-US/questions/801219], we have an answer:
# In the address bar, type "about:config", without the quotes
# Press the enter key
# In the filter window, type "Keyword.url", without the quotes
# Double click on the "Value" field, and type in "http://www.google.com/search?q=", without the quotes
Done!

While accessing lighthammer getting missing HTML Source File error.

Hi Friends,
While tryining to logon to Lighthammer I am getting below error:
(Missing HTML Source File: D:/Lighthammer/Illuminator/Temp/HomePages/admin/HomePage_admin.htm)
On checking at location D:/Lighthammer/Illuminator/Temp/HomePages/admin I found that folder admin is not available
and when we restore it from backup it get deleted as soon as we try to logon again.
This is happening with all other users also. As a workarround we first logon to Lighthammer and when it gives error we paste folder for corresponding user (admin in this case) with home page under D:/Lighthammer/Illuminator/Temp/HomePages then it works.
We are using MII version 11.5 on windows 2003.
Please advise. Thanks in advance.
Regards
Ajay Sehgal

Hi Diana,
Thanks for you Reply.
I checked directory D:/Inetpub/wwwroot/Illuminator/HomePages and it does not exist.
But this directory also not exist on any other system including the production systems which are working fine.
Also checked the permissions and there seems to be no permission issue.
Regards
Ajay Sehgal.

Source file missing.

The message says c:\documents and settings\my name/my documents\my pictures\adobe\digital camera\photos needs to be reconnected. I have received other messages indicating my picture file is missing. I thought I deleted it by accident but it is not in my trash file and I have not emptied my trash file. Any help to get to my pictures?

vincentrlarson,
It's genuinely heartbreaking to hear about lost files, because at one point or another, it's happened to so many of us, and photos are so valuable to us.
I default to the hope that people simply moved files around in folders, and that simply broke the links, and that the files are not lost. But of course the worse scenario is always possible.
The operating system was designed to allow peoplel to delete files. It's always the hope that people would only do this on purpose, and there are warnings along the way; Windows will warn you before deleting files, 'Are you sure you want to move this file to the recycle bin?'. Then they even stay in the recyble bin, allowing you to retrieve them if you didn't mean to delete them. But there were limits to what Starter Edition could do to interfere with file management functions in the operating system, and we were unable to augment file management with additional warnings or security, because of technical limitations (which we really did consider), so they don't exist.
What makes it hard for people to understand or accept is that the previews that they may still see in Starter Edition were rendered when the files were present on the hard drive, but they are just miniature versions of files, they are not the originals themselves. It's agonizing to believe that files have been lost, but they exist in Starter Edition, and the fact is, they don't, despite appearances. The program sits 'on top' of the operating system, it does not replace it.
If the files were recently deleted, and the hard drive space where the files used to reside has not be overwritten with other files, then there are file retrieval services and software that will try to restore accidentally deleted or corrupt files, but I've not been very successful myself using them, so I can't make any recommendations about what might work.
I truly regret these cases, but I hope you can understand that the program is not the cause of loss, but just the messenger, so to speak, for the operating system, which does the actual managing of file storage, movement or deletion.

UPDATE : Toshiba Recovery Wizard 'cannot read from source file or disk' error (satellite L500)

UPDATE 2: Phoned Toshiba tech support again, guided by techie to begin the recovery again. Just before phoning I was able to go into recovery options and view the drive setup and all the files that couldn't be read are on the CD so I've no idea why the error kept occuring, and neither did the techie. Fingers crossed it works this time but I'm not overly hopefully given that we've just done exactly the same as I did before. UPDATE 1: I got into the BIOS and reset everything back to defaults and yay, my toshiba recovery wizard now starts! :-D On the down side, when trying to do a factory default software / out of the box recovery I continually get error messages with regards to copying the files, for example
cannot read from source file or disk
7z.dll
Type application extension
size 585kb
date modified 7/14/2009 10.26pm
other read / copy errors include PREINST6.SWM, BOOT_32, BOOTPRIORITY, CHECKMAXPTSIZE, CHGBOOT, CPU, CPUCHECK, CREATEPARTITION, CTRLDRVINFO, DISKWIPE, DMI, DPINST32, EBLIB.DLL, ERRORDIALOG, EW3BOOTSEQ, FWLINK, FWLINK.SYS, GETHDDINFO, GETKEYSTATE, IMAGEX, INFILED, INITRECAREA, KRAIADAPI.DLL ..... at which point I decided to 'skip all' :-/
Any explanations as to what's going on and how I might be able to fix it would be very much appreciated! :-) Thank you!
I have a two and half year old satellite L500 with an Intel i-3 and 4 gigs of RAM, on which I was running Windows 7.
Admittedly it’s had rather a hard life (I ran some very demanding CAD / graphics software on it) but it had always performed well until just recently, when after suffering several BSOD (which had never happened before), the hard drive failed.
I partitioned and formatted a brand new hard drive (which is perfectly fine and functions normally when hooked up to another laptop with a SATA to USB cable) and obtained system recovery discs from Toshiba. Unfortunately, when I try and run the first disc, windows starts to load files but then generates an error screen with the message Error F3-F100-0003 and a request to turn the computer off.
When I use the windows Memory Diagnostic to get into the Windows Boot Manager Screen I get the following;
Windows failed to start. A recent hardware / software change might be the case.
To fix the problem
Insert your windows installation disc and restart your computer
Choose your language settings and click ‘next’
Click ‘repair your computer’
File: \boot\memtest.exe
Status: 0xc000000f
Info: the selected entry could not be loaded because the application is missing or corrupt.
I can also use F8 on startup to get into the advanced boot options but selecting any of them simply results in the F3-F100-0003 error message. I’ve run a memory test using the UBCD, which tells me the memory is fine, and tried another hard drive (which also works perfectly well in another laptop) but no joy. On phoning Toshiba support the techie said my hard drive had failed, but as I say, both hard drives are perfectly fine / usable when hooked up to another laptop. I’m now completely stuck as to what the problem is and how I might resolve it – any advice / suggestions would be most gratefully received! Thank you in advance :-)

Satellite L655-S5096
Downloads here.
the second disc gives me the the "cannot read from source file or disk PREINST8.SWM"
My best guess is that the disc is not readable. Try copying it to another. Sometimes that works.
Otherwise, order new discs from Toshiba.
-Jerry

How do I relink my video files when the source files are located in an AVCHD folder structure?

I am using FCP X 10.1.1 and I was completely done with editing a simple multicam video for a choir track and when I was exporting it it failed. I re-opened FCPX and found that there are several missing files, when I had just been working with them just a second ago! I know about relinking video files, but when I try to locate the source files (knowing where they are), the browser will not let me select ACHD file contents to get at the video files. Also, I cannot open the Library file for my project either.
Here is a snap shot:

If it comes down to it, use clip wrap to carve your .mov files out of the SD. I am confused tho - if you were originally able to import all you needed and still have the original media ? Why can't you do it again to add other clips? To "get in" to your Library, control click on it>show paskage... but do NOT MOVE anything only copy.
Perhaps soeone else can shed light on this?

Can I change original source files in the project?

I have a project which has become very disorganized over the last year of editing due to PPs poor ability to effectively share sequences/projects across multiple computers. My assistant editor used a different computer and so the links in the sequences point to multiple "source" files in the project (some in imported folders). However, there is ultimately only one original video clip. The problem is that Premiere Pro won't allow me to delete the nested versions of the source files without also REMOVING the clips in each of the sequences that uses them. For example, the project folder looks like this:
- Original File Folder
-- videoClip-001.mov
- Imported File Folder (imported on one of the many exchanges between editor and assistant editor)
-- videoClip-001.mov
- Sequence version 1 (Uses the second video clip, not the first - although they are ultimately the same video file)
If I delete the Imported File Folder, which only has a mirrored reference to the same video file as in the Original File Folder, then the clip in Sequence Version 1 dissapears. What I expect, rather, is to see a "missing media" message in the sequence so I can reconnect it to the version in the Original File Folder. But I can't. BIG HOLE in Premiere Pro CC.
Why do I want to do this? In a large project with hundreds of video clips, keeping order is very important. With the sequences using multiple "versions" of the same video clip, that order goes down the tubes and it becomes impossible to work.
Thanks for your help.

I don't know of any way to clean up this project, but in the future, don't import the project, just import the sequence. That will not create duplicates.

Error while using Oracle Table as source file :- ODQ for ODI

Hi All,
I am getting some errors while working on ODQ with Oracle Tables as source file.
If I am trying with text files (*.txt) as source and output it works fine.
Please let me know how we can connect to an oracle table which is my source file.
In the exported project -> “settings” folder
In the file named eN_transfmr_pXX.stx
For
/CATEGORY/INPUT/PARAMETER/INPUT_SETTINGS/ARGUMENTS/EN
TRY/DATA_FILE_NAME=
What I need to give? (URL – source file)
I tried with
1. jdbc:oracle:thin:@xxx.xxx.x.xx:1521:ORCL
2. jdbc:oracle:thin:UserName/Password@// xxx.xxx.x.xx:1521:ORCL
i am not sure , is there any thing missing ???
(Note: for text file I am giving “D:\Sourcefolder\customer.txt”)
If I am running the batch file directly from CMD Prompt it’s displaying the error message
“Cannot open file”
If I am connecting with ODI it’s displaying the error
com.sunopsis.dwg.function.SnpsFunctionBaseException: OS command returned 3503. …………………….
Thanks in advance…
Rathish A M

Hi Ratish,
ODQ supports files as inputs not Oracle tables, what you should do is:
- define an ODQ process that takes a file as an input.
- create an ODI process that dumps your Oracle table into a file that will be used by ODQ. (interface or OdiSqlUnload step)
- run the ODQ process in ODI (in a package)
- create an ODI interface that will load your ODQ output file into a DB.
You can profile Oracle tables directly using Oracle Data Profiling.
Thanks,
Julien

Related to calculation of value from two source files

Hi, we have two files based on volume and costs
Time,Item,site,ASM,Retail are dimensions..
The volume one is:
May-09     item 1     Site 1     ASM 1     Retail     VOL     100
May-09     item 2     Site 1     ASM 1     Retail     VOL     150
May-09     item 3     Site 1     ASM 1     Retail     VOL     130
May-09     item 4     Site 1     ASM 1     Retail     VOL     120
May-09     item 4     Site 1     ASM 2     Retail     VOL     150
May-09     item 4     Site 2     ASM 3     Retail     VOL     100
The Cost one is:
May-09     item 1     Site 1     1.2
May-09     item 2     Site 1     1.3
May-09     item 3     Site 1     1.1
May-09     item 4     Site 2     1.3
May-09     item 4     Site 1     1.5
note that in the second file site,ASM are missing (this was the problem for us from source file)
Here in essbase we need to calculate VALUE = VOL * COST with respect to item and site,such that in selection critera
the value must be represented with respect to ASM and Retail dimension also.
Psl post the approach and the sollution how to load this and how to calculate..

Hi,
You would have to transform the second file to include the ASM and Retail dimension members. It is essential that you have one to one relationship between Site, ASM and Retail. You can maintain the mapping in a separate file and then read the cost file and get values for ASM and Retail from mapping file.
Otherwise in the load rule, you will have to specify one single member from each dimension - ASM, Retail in the header definition.
Once you have the data in the system, you can run a calculation to calculate the value of VALUE. Or else, you can also define a formula on VALUE.
Let me know if it helps.
Cheers
RS

Moving and copying events and projects to an external hard drive using Imovie09-Source clip is missing

Some background on what I am doing is importing all of my home video into an event in IMovie. Since DVD's can only hold about 2 hours of footage, I am making a new project for each 2 hours so I can burn the footage onto a DVD. I want to make space on my internal hard drive so I am trying to move the projects that are completed to an external drive. Because I also don't want to lose any footage I have imported into the event I am also copying the home video event to the external drive. (didn't want to move it yet until I know what i am doing, just in case it is lost somehow).
I tried moving a project to the external drive (it was a slideshow for my daughters first birthday which contained photos and video clips from the event that was already copied to the external drive). The project did move to the external hard drive but on the video clips there is a yellow triangle that says source clip is missing. I am moving and copying from within Imovie and NOT the finder so I don't understand why it says the clip is missing when it is definitely a part of the event that is already on the external drive.
What is interesting is the source clip is missing error showed on the first birthday project but it did NOT show as an error when I moved the 2 hour home video project. (All of the video in these projects are coming from the same home video event)
I am trying to make sure that when I move the projects permanently off the internal hard drive and onto the external drive, that I am not losing any part of my projects. I want to be able to easily move them back and forth if needed without any missing files.
Any suggestions as to why I am still receiving the yellow triangle?

As I can't see what you are doing, I can't tell you what you might be doing wrong.
You could try trashing the preferences.
Many weird things happen as a result of corrupt preferences which can create a vast range of different symptoms, so whenever FCP X stops working properly in any way, trashing the preferences should be the first thing you do using this free app.
http://www.digitalrebellion.com/prefman/
Shut down FCP X, open PreferenceManager and in the window that appears:-
1. Ensure that only FCP X is selected.
2. Click Trash
The job is done instantly and you can re-open FCP X.
There is absolutely no danger in trashing preferences and you can do it as often as you like.
The preferences are kept separately from FCP X and if there aren't any when FCP X opens it automatically creates new ones . . . instantly.

Prelude source file is missing

Similar Messages

Maybe you are looking for