Prelude takes a long time to open a (new) project file

Hi,
I'm trying out Prelude, and I've created a new project and ingested (via link) about 20 hours of Canon XF footage in about 1000 files from an internal hard drive. All the media loaded correctly and all the audio peak files were generated.
When I close and reopen Prelude and try to open that project, the "loading project" window pops up, the progress bar proceeds to completion over a few seconds, and the window goes away. The issue is that Prelude is then unresponsive for the next ten or fifteen minutes! I can see the entire interface, but nothing responds. I can see the clips listed, but their thumbnails are not loaded. Windows System Monitor tells me Prelude is actively using CPU and accessing the disk. After 10-15 minutes, the thumbnails appear and I'm able to use Prelude, but this seems like a LONG time to load a not-so-big project on a pretty new system. Is this normal?
My system has one of the new i7-4770k processors, 16 GB of RAM, a Samsung 840 SSD for the system drive, and an internal Seagate 3TB 7200 RPM drive as the media drive for this project, so I would expect loading to be pretty snappy. While Prelude is unresponsive, system monitor shows it using 15-20% CPU, 11 GB of RAM, and only 5-10 MB/s disk access. I've tried recreating the project file from scratch several times, with the same result every time.
Is this wait time normal? Is there any way I can speed it up?
If it's still loading, it seems like it should provide some feedback about that, too.

Hi Michael,
I tested out Prelude with approximately half of the same footage of my
larger project. It still had a brief unresponsive period but,
interestingly, the relationship to the amount of footage didn't seem to be
linear. Whereas a project with all the footage takes 10 minutes, this one
only took about a minute.
I should also point out that, although this is all Canon XF footage and all
the media is in numbered subdirectories with metadata like on the card,
they are not contained within the "CLIPS001" directory that your Canon XF
importer uses to identify XF media. Therefore, when I import them, the
import dialog doesn't identify the media directories as such. I don't know
whether that makes a difference, just wanted to try to help narrow it down
in any way I can.
Hope that helps. Will you update me when you have something?
Thanks.

Similar Messages

Reports Take A Long Time to Open on New Server

We have a number of crystal reports. Many have sub reports. Some have a lot of sub reports.
Earlier this year we swapped out a file server. ADAPCOFP went away and was replaced by ADAPCOFP1. ADAPCOFP has been turned off for over a month now.
The reports run, but when you go to initially open up the file it takes forever to open. The reports run fast once they are open, but take forever to open them. One report, that we run daily, takes 3 minutes to open. I turned the ADAPCOFP file server back on and this same file takes 5 seconds to open.
I did some google searches and see that others have had this same problem and seem to indicate that they found UNC references to a now non-existent server, removing the references fixed the problem. We have looked and relooked and looked some more and canu2019t find any UNC references anywhere in the report. There has to be something there because the state of ADAPCOFP seems to be the key to how quickly the report opens up.
Where should I look for UNC references. We have Crystal that was delivered with Dynamics GP and 99% of our reporting is from GP.
Thanks !

Hello,
The issue is the reports are still looking for the original server because that server name is saved in the report file. You'll have to open each report up and do a Set Location to the new report. You'll need the same version of the REport Designer the reports were created in.
I suggest to call Dynamics and ask them how to update the reports.
Thank you
Don

Problem description: My macbook pro since this afteon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click- EtreCheck

My computer
Problem description:
My macbook pro since this afternoon has been slower, every application I open, it takes a long time to open, and shows the spinning beach ball for a while before it opens or performs some task, or responds to a click…
EtreCheck version: 2.1.8 (121)
Report generated 31 de março de 2015 18:29:15 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.3 GHz Intel Core i5 CPU: 2-core
    16 GB RAM Upgradeable
        BANK 0/DIMM0
            8 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Normal - Cycle count 250
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 0:25:47
Disk Information: ℹ️
    Hitachi HTS545032B9A302 disk0 : (320,07 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 318.84 GB (47.94 GB free) - 51 errors
            Core Storage: disk0s2 319.21 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
    [running]    com.trusteer.rapport.rapportd.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
    [loaded]    com.oracle.java.JavaUpdateHelper.plist [Click for support]
    [running]    com.trusteer.rooks.rooksd.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    UNKNOWN Hidden (missing value)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Stickies    Application (/Applications/Stickies.app)
Internet Plug-ins: ℹ️
    JavaAppletPlugin: Version: Java 8 Update 31 Check version
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
    AdobePDFViewer: Version: 10.1.13 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
    Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
    iPhotoPhotocast: Version: 7.0 - SDK 10.8
User internet Plug-ins: ℹ️
    npsf_cef: Version: sf 3.3.1.1 [Click for support]
    Google Earth Web Plug-in: Version: Unknown
Safari Extensions: ℹ️
    DivX HiQ
    DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    Perian [Click for support]
    Trusteer Endpoint Protection [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 318.84 GB Disk used: 270.90 GB
    Destinations:
        Time Machine Backups [Local]
        Total size: 999.86 GB
        Total number of backups: 60
        Oldest backup: 2012-07-15 01:16:54 +0000
        Last backup: 2015-03-29 19:28:06 +0000
        Size of backup disk: Excellent
            Backup size 999.86 GB > (Disk size 318.84 GB X 3)
Top Processes by CPU: ℹ️
        97%    rapportd
         3%    WindowServer
         1%    mds
         0%    fseventsd
         0%    distnoted
Top Processes by Memory: ℹ️
    155 MB    Safari
    120 MB    Finder
    86 MB    rapportd
    86 MB    WindowServer
    69 MB    mds_stores
Virtual Memory Information: ℹ️
    12.56 GB    Free RAM
    2.53 GB    Active RAM
    428 MB    Inactive RAM
    1.66 GB    Wired RAM
    1.04 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 31, 2015, 06:00:15 PM    Self test - passed
    Mar 31, 2015, 01:13:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-131305_[redacted].crash
    Mar 31, 2015, 01:05:42 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-130542_[redacted].crash
    Mar 31, 2015, 12:24:33 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Microsoft Error Reporting_2015-03-31-122433_[redacted].crash
    Mar 30, 2015, 05:45:38 PM    /Library/Logs/DiagnosticReports/Skype_2015-03-30-174538_[redacted].cpu_resource .diag [Click for details]
    Mar 30, 2015, 01:52:07 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Last.fm Scrobbler_2015-03-30-135207_[redacted].crash
    Mar 29, 2015, 05:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_20 15-03-29-175505_[redacted].crash
    Mar 29, 2015, 01:06:38 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130638_[redacted].hang
    Mar 29, 2015, 01:02:47 PM    /Library/Logs/DiagnosticReports/VLC_2015-03-29-130247_[redacted].hang

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Firefox takes very long time to open and often crashes for some websites

i have used firefox 3.6 with windows xp, vista and now windows 7. there is same problem i am facing at all after well usage of week. firefox takes very long time to open approx. 1 minute at first click. after refreshing computer when i click again, it becomes ready to use but meanwhile you re working firefox opens in another window perhaps for the first click. what is this please? i have reinstalled firefox but it is not fixing problem
== Troubleshooting information ==
how can firefox be ready for use at first click?

Open Activity Monitor and kill this process - rapportd.
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

ITunes takes a long time to open, or doesn't open at all.

I recently had problems with iTunes where it just wouldn't open. I did a factory reset on my computer, however it takes a long time to open and works really slow. When I try to sync, it takes around in hour.

.

It takes a long time to open up documents on my Imac. I get the multicolor circle for a long time. I have 27 In Mid 2010 3.2 ghz Intel core I3 with 16 gb memory.

It takes a long time to open up documents on my Imac. I get the multicolor circle for a long time. I have 27 In Mid 2010 3.2 ghz Intel core I3 with 16 gb memory.

There are file hidden all around in your system.
Go to Phil Stokes' info page, for a gerat uninstall primer.

AP Trial Balance - File is massive and takes a long time to open up

Hello,
We are upgrading from 11.5.10 to 12.1.3 and are running into some serioud problems with the Accounts Payables Trial Balance report in Detail Mode.
1. The Report takes upwards of 10 minutes to open up - and in many cases does not.
2. On further research we see that the report output file is > 500MB whereas comparable 11i Trial Balance files are only 19MB.
3. We tried running in various formats Text, PDF, HTML with no luck.
4. In fact HTML and Text formats gave “Authentication failed” errors when we tried to open the report.
My questions are:
1. Why is there a such a large increase in file size? Is this expected going to R12?
2. Is there a way to speed up the opening of the large files or create smaller files? - (summary mode, and smaller date ranges are not options as per business needs). Even a 2 month date range give the same problems.
3. We noticed that the XLA_TRIAL_BALANCES table has 36,521,125 records...LARGE.
4. We compared the ap_liability_balance records between 11i and R12. We have 29,171,382 in 11i and 37,769,034 in R12. But this is expected as we purge regularly in 11i production and I don't think this difference (about 30%) in the size of the tables should cause such a large difference in the size of the report files (nearly 2000%!!!).
5. Why are we getting Authentication failed errors? Just for these reports?
Of course we opened an SR, but you know how SRs go :-) and this is a time critical project with our deadlines nearing.
Any help or pointers from the experts here is greatly appreciated.
Thanks
Edited by: user11992646 on Jan 27, 2012 2:12 AM

Hi Hussein,
Thanks for your prompt reply and my apologies for the substantial delay in mine.
We did some trouble shooting since then.
We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
My earlier questions here now boil down to the following questions.
Q1. Is the huge XML Publisher's .out file expected in R12? It really is massive! The text file from 11i was just 19MB
Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text. I would expect plain text file to be much smaller. How can we get the output in plain text?
1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
2. The authentication error is resolved. It was because of formatting the reports incorrectly.
3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
I will appreciate if others can share any experiences if you have faced this situation and how you have handled it.
Thanks in advance for your time!

Crystal report with prompts takes very long time to open in infoview BOXI3.

Crystal report with prompts takes very long time to open in infoview BOXI3.1?
Is there any way to increase the performance.

Ramsudhakar,
There are several items that could cause these slow down problems. Without knowing more about the way your environment is setup, I could cause more problems, by giving out performance tips. You would need to be more specific in your post.
What we know. BOXI3.1
What we don't know.
O/S
App. Server
Hardware Spec's
ETC.
I see that this post has been out here for some time. So if this is still a problem for you I'll try and help, if you provide more information.
Thanks
Bill

Outlook 2010 takes a long time to open emails with embedded images

Hello,
outlook 2010 on windows 7 both with latest updates applied. outlook is in online mode and the option "Don't download automatically in HTML email messages or RSS tiems" is not selected.
it takes a long time to open the message with an embedded picture: at 6 sec to open an image size of 75kb
When I open the same message in OWA no delays at all.
I am using Exchange server 2010 Sp2 and I already created new outlook profiles for the users affected. no changes.
Any ideas?

Hi Aprylmsx,
According to your description, I recommend you refer to the following methods to troubleshoot the issue:
1. Please check if there is any anti-virus software on your client PC, if yes , please disable it and check the result.
2. Please check if there are any 3rd party add-ins in your outlook, if yes, please remove it and check the result.
In addition, How many users encounter this issue? a lot or just only you?
Best regards,
Niko
Niko Cheng
TechNet Community Support

My mac takes a long time to open an internet page

My mac takes a long time to open on internet page and it's not the connection as all our other apple products in the house are working fine. Any suggestions?

Here are some troubleshooting steps.
Does this behavior persist if you: (1) Try it from a different user account, e.g., Guest? (2) Try it after starting up in Safe Mode ? (3) Try it after turning off all Safari Extensions? (4) Turn off all virus scanners, system cleaners, and third party optimizers? (5) Delete all malware, (6) Temporarily disable all internet plug-ins? (7) Make a burnt offering to Zeus?

Downloaded 4.0 and having problems.webpages take a long time to open & when opened, I get a "firefox is not responding" message.yahoo email is not loading.Is there a problem with firefox 4? is the problem going to be fixed?

firefox problems after installing version 4.0

Hi Hussein,
Thanks for your prompt reply and my apologies for the substantial delay in mine.
We did some trouble shooting since then.
We repolved the problem by choosing a pdf format instead of the seeded RTF format. This opened up the output in a couple of minutes because the pdf formatted output was about 50mb vs the RTF output which was 300MB+.
But the ORIGINAL problem still remains. The xml tagged .out file is still huge with a size of nearly 1gb!
My earlier questions here now boil down to the following questions.
Q1. Is the huge XML Publisher's .out file expected in R12? It really is massive! The text file from 11i was just 19MB
Q2. Oracle does not seem to offer the option to format the output in plain text ...We see PDF, RTF but no plain ugly text. I would expect plain text file to be much smaller. How can we get the output in plain text?
1.Yes our stats are upto date. Let me emphasize that we do not have a performance problem with the report itself. The issue we are having is opening up the output.
2. The authentication error is resolved. It was because of formatting the reports incorrectly.
3. We did not use the usual tuning procedures such as tkprof because we do not have a performance problem.
4. We checked the OPP file and there are none. I reiterate, The report does complete without issues. It is just that the output takes a long time to open up in the RTF
I will appreciate if others can share any experiences if you have faced this situation and how you have handled it.
Thanks in advance for your time!

Every time I open a new illustrator file it says "print.ai" file unknown. I can open previous work but no new files. Any fixes?

Every time I open a new illustrator file it says "print.ai" file unknown. I can open previous work but no new files. Any fixes?

All nee AI files are based on document profiles, which are actually plain AI files.
Print.ai is one of them. You may try and select a different profile to see if it's just the Print.ai
But it may of course be all of them that somehow got corrupt.
Could be that the files are corrupt or that Illustrator doesn't have access privileges.
The files are located in your user folder. Find the exact location in this article:
http://blogs.adobe.com/adobeillustrator/2009/05/startup_profiles_a_great_tool.html
In case the files are completely corrupt you may try and rebuild the preferences or even do a complete reinstall.

It takes a long time to open an app and sometimes it will just crash, any idea how to fix it?

My four year old Macbook Pro couldn't start yesterday and after going through solutions and all, it worked. But now it's freaking laggy and whenever I want to open an app, it takes a long time or the app will just crash. Any idea how to fix it? I really need the speed and everything back.

noeleeeen,
so you have an external hard disk, onto which you deleted/moved files from your internal hard disk, so that you now have 143 GB or so free on your internal hard disk — is that correct? Is the external disk purely for backups (e.g. a Time Machine destination), or does it function as a supplement to your internal disk?
Was it entirely your personal data files (documents, photos, movies, music, &c.) which you’d deleted or moved to the external disk, or did you also delete/move apps, libraries, &c. over there?
I’m not familiar with Echofon Lite, so I can’t comment on it, but an Apple-supplied app like the App Store shouldn’t crash.
Have you tried running Disk Utility yet, to see if its verification process gives your disks its seal of approval?

Excel files with fields linked to other excel files take a long time to open from SharePoint library

Trying to track a problem for a user.
Most of the documents opened from our SharePoint libraries appear to open in a timely fashion.
But...one user has noticed an issue, and I just noticed something with her files that are a little less common than other stuff we've seen.
she has a lot of pricelist excel files. there are some master price list files, and then other files that link to fields from within the master files.
the files that contain links to other files appear to be the ones that open very slowly.
the files are being opened via excel itself, not the owa viewer or editor.
is there a trick to setting up either the library, the site, site collection or web app... or some client-side setting that affects how quickly/efficiently excel will open files that link to other excel files shared within sharepoint?

Hi carphuntin_god,
According to your description, my understanding is that when you click a hyperlink which redirect to other files , the file are opened very slowly via excel client.
How about you download the same file and open it using excel client? If it is opened quite fast, the issue should be caused by some third-party add-ins in the office program or antivirus soft.
Here is a similar thread you can have a look:
http://social.technet.microsoft.com/Forums/en-US/ff0c5306-5300-4010-a760-c4cca320b6fc/excell-file-taking-long-time-to-open-and-edit?forum=officesetupdeploylegacy
http://social.technet.microsoft.com/Forums/en-US/5c746958-418a-44f6-a777-9f8bddf6dbb6/sharepoint-file-open-takes-long-time?forum=sharepointdevelopmentlegacy
If you want to open the files using excel service after click the link in the excel file, you can create the hyperlink in the following way:
General Syntax:
http://<server_name>/<site_name>/_layouts/ xlviewer.aspx?id=<workbook path>&range=<location>
For example:
http://CorpServer/DeptA89/_layouts/ xlviewer.aspx?id=http://Mfct/Stats/Shared%20Documents/Parts.xlsx&range=Widgets!A1:F25
For more information:
http://office.microsoft.com/en-001/sharepoint-server-help/using-hyperlinks-in-excel-services-HA010173679.aspx
If you want to open the files using Office Web Apps after click the link in the excel file, you can create the hyperlink in the following way:
http://<server name> / <site name> / <library name>/<your file name> ?web=1
For example:
http://sp/Shared%20Documents/exceltest.xlsx?Web=1
Best Regards,
Eric
Eric Tao
TechNet Community Support

Takes a long time to open small MS Word Documents on SSL VPN

I have an issue that when users connect to my ASA 5520 via SSL VPN it takes from fifteen seconds to three minutes to open up small Microsoft Word documents, it also takes a long time to save changes. Users also reporting Word crashes when on the VPN, but not when they are on the LAN. I have checked the endpoint speed of my cable modem and all is well there. The DNS and WINS settings are correct on the ASA. I have turned off compression and enabled DTLS. Any suggestions? Thanks

Reduce the mss to 1300. If that doesn't fix it, keep lowering it by 100 each time. If you get down to 1000 and it still doesn't work, then we need to look at something else.
sysopt connection tcpmss 1300

Prelude takes a long time to open a (new) project file

Similar Messages

Maybe you are looking for