Prem c310 Prints Wirelessly But Unable to Connect to Applications on Printer

We are unable to use any of the Applications that show on the viewer. We receive error message"There was a problem connecting to the Internet. Please try again". I am on Macbook Pro with no issues printing wirelessly. All settings say the printer is connected to the network. Thank you

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • Unable to connect to internet or print wirelessly on Boot Camp with Windows 7

    I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
    A month later, I am unable to connect to internet or print wirelessly.
    It states that I am connected to my router.
    When I trouble shoot, it cannot find the problem.
    My wireless connection and cable connection are fine on the MAC side.
    Please help.

    looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router?  Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.

  • Unable to connect hp photosmart c4480 printer to wireless network

    I just purchased a new laptop HP dv7-6169nr but I'm unable to connect to my HP printer Photosmart C4480.  I'm connected by home linksys.  I tried to set up connection by using "sharing" properties but I guess I must be doing something wrong because I'm able to find the printer but when I try to print, the computer cannot find the printer.  Can anyone help me?

    Hey there!
    Do you have a different pc available? Or if you have a friend who has a laptop will do as well. Because that will answer your question if its an issue with your pc. If it doesnt work with the other pc and you've tried a diff cable, its a big possibility its with the usb port on the printer.
    Now, if you dont know anybody with a diff pc, you might wanna check your firewall settings. Its also one reason why your pc cant detect the printer.
    You can also disable the startup programs just to make sure its not an issue with any 3rd party software. Try to follow the steps in this link in how to disable them ( and make sure you re-enable them once your done )
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=us&dlc=en&la...
    if one of my advice works or helped a little, you can click the *KUDOS* button on the left. thanks.
    Disclaimer : Even though im working for HP, all comments and suggestions are my personal opinion. HP still has a process to follow. (But i hope it will help ü)

  • I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

    I am having trouble printing I have a connection to my printer wirelessly but does not print out the correct page I want.When I do print I get a bunch of pages more than is needed and also get a code and symbols please help I am jammed at work

    This can be the result of selecting the wrong driver. An older, unsupported laser printer will sometimes work with the generic Postscript driver.

  • HP Laserjet 2820 - print spooler was unable to connect

    Working in Microsoft 2003 and printer is on a wireless network. In over a year - never had a problem until 5 days ago an error message appeared when I attempted printing which stated... print spooler was unable to connect to your printer. This can be caused by your printer being turned off, the cable being unplugges, or being connected to a VPN, which will block your access to your local network.
    Also, when I attempted accessing the Print Settings from HP Director, it would not open and gave an error message...An unknown error occurred. Make certain that the device's power cord is plugged in, the power is turned on, and that all cables are properly connected. Check the Troubleshooting tab or product documentation for more information.
    Next, I thought I would delete the software and re-install.  However - I no longer have the installation disk for the printer.I then tried changing the printer port to a standard port. That did not work.
    Help would be greatly appreciated.
    Thank you.

    hi everyone
    i have same problem on hp clj2820, half page printed, half page
    1)  i cleaned laser mirrors and verify conectors and wires of laser scanner unit ... the problem persist
    2) i inspected carousel assembly, a small plastic gear on the upper left side was wrong aligned, 1 tooth scrolled up or down, i fit this tooth in correct position ... the problem persist
    what is happening?, regards

  • How to connect printer wireless i dont have wirelee router? my printer is deskjet 4625

     i m unable to connect my printer wireless and generate code for registering at eprint.how to connect printer wireless i dont have wirelee router? my printer is deskjet 4625. please suggest ? i have installed printer on my computer and laptop. computer is having w-7 os and laptop is having w-vista.
                                                      ​      thanks
                                                      ​               p.h.thakur 

    That is not correct sabretooth04,
    The Deskjet Ink Advantage 4625 only support USB or Wi-Fi, it does not provide any Ethernet connectivity and therefore a Wireless router is essential for the web services to work.
    The specifications can be found in here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c03149922&tmp_task=prodinfoCategory&cc=us&dlc=en​...
    ichleiben57 - As your printer only support wireless connection you will either need a wireless router, bridging your wired ADSL router with a wireless access point or replacing the printer to a different model which support wired ethernet connection.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • TS1398 Can't connect to hotspot with my iPad, picks it up but unable to connect. Any sugestions?

    Can't connect to hotspot with my iPad, picks it up but unable to connect. Any sugestions?

    When Access Connections fails to connect it asks if I want to configure the network and there's a bunch of settings. Connection type: infrastructure or Adhoc, Wireless security type "use static WEP keys", "Use Wi-Fi protected Access - Pre Shared Key (WPA-PSK)" - I choose it and under Properties there's more options. Access point authentication, WPA-PSK or WPA2-PSK; I've tried it both ways. Data encryption: TKIP or AES, I've been using TKIP. Under Pre-Shared Key, there's the only box I see to enter a password, so I enter the password there.
    Chances are pretty good that the problem is the network configuration of your PC and not the AirPort Extreme Base Station (AEBS). What configuration options you choose will depend on how you set up the AEBS's wireless network, but the following can be used as a guideline:
    o Connection Type: Infrastructure
    o Wireless Security Type:
    AirPort Setting = PC Setting
    o WEP = WEP
    o WPA Personal = WPA-PSK w/TKIP
    o WPA2 Personal = WPA-PSK w/AES

  • My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting  wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

    My time capsule seemed to have given up so I have just got a net gear router, I have no problem connecting  wirelessly but when I connect an Ethernet cable it says it's connected but pages will not load

    Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • OS 10.6.8 and Canon printer.  Prints wireless but will not scan wireless.

    Just bought a Canon MX890 multifunction.  OS 10.6.8.  Used Canon support to help me set up wireless and I can print wireless but it will not scan wireless.  Error message reads:  "Cannot communicate with scanner for these reasons:  Scanner is turned off or USB cable is disconnected."  Any suggestions?

    Sounds like you are trying to use Canon's MP Navigator application. To get this to work via wireless, you first need to open Canon IJ Network Selector which is located in Applications > Canon Utilities. With this application open it should show you the MX890 on the network. Select it and OK the change.
    Next step is to open the MP Navigator application and click on the Preferences button. Then from the General tab you need to ensure the Canon MX890 Network is set.
    With these two actions completed you should be able to scan with MP Navigator.
    Or as Carolyn has instructed, you can use Image Capture which is included with OS X to scan from the MX890.

  • I cant connect to my router wirelessly but I can connect...

    I cant connect to my router wirelessly but I can connect directly, Is there anything I can do about this?

    does the wired computer get an ip address from the router ?? check whether it pings the router's ip add ( default ip add - 192.168.1.1 )

  • Want to print wirelessly from macbook pro to wired PC and printer

    Want to print wirelessly from macbook pro to wired PC and printer using wireless router.
    I am having trouble setting this up? help? suggestions?

    > Printer is showing its location as a direct connection via USB
    But it's on the PC right ? So it's a shared network printer with a Spooler (this is how it should be configured using Prnter Setup Utility ...)
    > If I click to run dic utility there are no clickable options... only lists calculate image checksum.
    Once Disc Utility is launched, select your local hard drive then the [Repair Permissions] button bottom left will light up.

  • PDE-PXC019 Unable to connect to Application

    Hi
    I am facing following two problems while running forms in 10g IDS.
    First
    If i run the form directly from form builder it opens an html file in internet browser and shows following:
    1. URL:C:\Documents and Settings\user\Local Settings\Temp\s2pg.9htm
    2. Contents in the browser:
    <html> <head> ORACLE FORMS.</head>
    <body onload="document.pform.submit();" >
    <form name="pform" action="http://mycomp:8889/forms90/f90servlet" method="POST">
    <input type="hidden" name="form" value="C:\Documents and Settings\user\My Documents\demos\organization.fmx">
    <input type="hidden" name="userid" value="SCOTT/TIGER@orcl">
    <input type="hidden" name="obr" value="yes">
    <input type="hidden" name="array" value="YES">
    </form> </body></html>
    Now if i give the correct url directly in browser or delete the number "9" from the extension of the file in url it works fine, i don't know how theadditional value is added to the extension & everytime it is changed(1,2..,a,b...).
    Second
    If i run form in Debug mode directly from the builder it first gives the same issue as discussed above problem. After i remove the extra character from the extension it runs the form but doesnot start the debugger after reaching the breakpoint.
    if i run the form by giving the url in the browser with "DEBUG=YES" it gives following message:
    Host=mycomp
    Port=<<any number>>
    To enable debugging, enter the host & port into the attach debug dialog in the builder.
    now i go to the builder and do the same, then attach debug dialog gives following error:
    "PDE-PXC019 Unable to connect to Application."
    I am using:
    1. O/S : Windows XP professional
    2. Oracle IDS: 10g(9.0.4)
    Please tell me how to fix it.

    Thanks a lot Frank
    But i dont have accessibility to Metalink right now so i need to solve it by myself. I've solved Second problem but first is still their, see if you can do something for it.
    Thanks once again

  • Unable to read information of application in app store. Still can download but unable to read the application infor before downloading

    Hi,
    Please help, unable to read information of application in app store. Still can download but unable to read the application infor before downloading.
    I'm using iphone4, ios 6

    Yes it sounds like your application could be corrupt.
    First I would make sure you don't have a program like backup software or virus protection trying to read the files when you try to start the application. If not,
    Do you have any backups or data exports? If so, I would try to restore them for the application
    If you do what EsbHelper suggests, you will have to recreate the database. I think he is missing a few steps.
    If you are going to try to recreate the application, you need to copy your outline rules files calc scripts and report scritps (.otl, CSC, REP and rul files) to s saved directory.
    If you delete the directory using the file system, you orphan things in the security file. It's better to try to do it from EAS.
    Once it has been deleted, and recreated from EAS, then copy back in the objects. You will have everything but data and security. those will have to be recreated.
    As aI said first, the best way to do this is from some sort of backup. othersiwe it can get a bit messy

  • I can no longer print using wifi. I have to connect a USB cable to print. Setup and pref show that I should be able to print wireless but I keep getting printer not found msg when trying.

    I can no longer print via wifi. I could at one time but now I have to connect to printer with USB. All settings appear correct in printer and macbook. Sys pref shows printer with green light next to idle. Sending a print prompt results in "searching for printer, printer not found, ensure printer is turned on". I have reinstalled printer in my print list and reinstalled printer software on macbook. Kodak 5250 AiO printer shows it's configured for and on wifi channel. I go online with laptop using wireless but cannot print. Help!

    If you know the IP address of the printer, then you can check if there is a working path between the Mac and printer. This can be done using Network Utility or a web browser.
    If you open Network Utility and select the Ping tab, you can enter the IP address of the Kodak and then press the Ping button. If there is a working connection then you should get a reply to each packet sent.
    With the web browser, many devices have a built-in web server so you can type the IP address of the printer into the browser and if there is a working connection then you will open the printers web page.
    So, are you able to confirm you have a working connection between the Mac and printer?

  • DexterM - Printer connected wireless but Notebook cannot connect to printer?

    Hi all,
    I will be a brief and clear as possible. I really hope someone can help! thanks in advance.
    DexterM, if your still arond I think maybe you would be familiar with this type of thing. I will be as concise as possible.
    I incorrectly removed some HP folders in an effort to remove the bloatware. (shop and participation program etc).
    Anyway, I damaged my install because Solution Center disappeared! I needed it to scan multiple page PDF docs.
    I tried to uninstall and re-install the Full Software package (my printer is B110a) 10s of times. Each time the Installer showed that 'Solution center' is already installed. It was not installed.
    Eventually after days of trying to fix this, I took the drastic measure of remving some HP keys from the registry. Not randomly of course, but from a solution post on this board. I only removed about 4 HP keys. I was very careful not to remove any Windows ones. (I se Win7).
    So.. Solution center then installed. Hooray! Everything seemed perfect. EXCEPT....
    I had removed 2 keys related to the Network. Something like NET HPz12 and something similar. 
    Now when I tried to connect my printer wirelessly (using the USB to wireless process) it cold not find any wifi networks even though there were several in the vicinity.
    I found a solution on this forum which involved right clicking on the network.msi file and choosing uninstall, then re-installing it. This did the trick! now when I ran the "USB to Wireless" process it instantly found my wireless "your PC is connected to SSID blah blah blah, is this correct". Yes. It continued the network diagnostic but always failed at this point.
    I think because some service or reg key is missing the computer cannot commnicate directly with the printer, but it can see it at http://192.18.1.2 etc via browser. so all is connected properly, but something is preventing the laptop from commnicating with the printer. 
    So to recap.
    Laptop works perfectly with printer via USB.
    Printer is connected to my wireless without isse. I can see it at http://192.168.1.2 etc
    Laptop cannot connect to printer though, and fails everytime I run the 'usb to wireless' process.
    I suspect one of the NET keys I deleted frmo the reg is to blame? Or some missing windows service?
    The network diagnostic utility says "network software missing, please reinstall or fix and try again". I have uninstalled and reinstalled 10s of times now. It's not putting back no the required network service/key thats missing.
    Argh. please can anyone help. Someone must have been here before? I have a screen shot too of the 'USB to wireless' process failing. It shows the connection is there, but something is not right.
    image 0 - the 'usb to wireless process' picks up my wireless without any problem. ok
    image 1 - during the 'running diagnostic on network' part of the process it fails
    image 2 - not much to go on here. I reinstalled and uninstalled 4 or 5 times already. same thing. 

    Nobody? Im really stuck here... Been onto support 3 times and they cannot help. I need someone with expert skills who will understand which windows service or driver or key is preventing the notebook from talking to the printer even though both are on the same network successfully. No AV or FW on the network either.

Maybe you are looking for