Prem Pro CS3 audio becomes intermittent after a while

This has been going on for a while and I have only now decided to do something about it:
While working on a project in PPCS3, after a while the audio starts to become intermittent. Its as though a buffer has become full and the audio data demand is more than the buffer can supply. I can't seem to find a way to Purge any buffer (if there is one). Are there settings I can adjust to prevent this?
My system is XP64 SP2 RAM 8GB Quad CPUs
Scratch locations: C: 66GB. J: 1.2TB
Re-starting PremPro solves the problem for a while and it then starts all over again.
Any thoughts?
Thanks.
Mark

Yes, I'm planning on going to CS5.5 but I was hopeing to stay with my present XP64 OS set up, so any other suggestions would be appreciated. I'm not sure all of the AFX plug-ins that I use are happy with Win7
Thanks.
Mark

Similar Messages

Prem Pro cs3 causes windows 7/ 64 to become corrupt

Having installed prem pro cs3 in win 7/64, I get frequent crashes and eventually windows reports that windows explorer is unable to start. This means that win cannot start or if already running cannot access anything. Can only be cured by a new installation of windows.have repeated this process several times with Prem the only program installed. Might work ok for a few days then it starts all over again. Any ideas anyone? Hve tried restore and repair etc. No good.

If you have Win7 PRO read A fix via Virtual XP http://forums.adobe.com/thread/702693?tstart=0

Encore in Prem pro CS3

Have spent a while looking how to get encore to work in my downloaded trial copy of Prem pro CS3
I have put in markers
when I go to export Encore is light greyed out and not in dark grey am I missing something??

I don't have the link handy, but the last time someone asked about this I went to the download page and then looked at the FAQ
There are SEVERAL steps to take to convert the PPro3 trial to real software... part of which is not just download "some codec stuff" but actually downloading AND installing Encore3 (and OnLocation?)
So... you need to download AND install more software, not just codecs

Dears, i have purchased a new macbook pro with lion os, then after a while for a notification to update the iPhoto app, and when i tried to update it said that unable to update, then i uninstalled it, then i tried to install it but it said these apps co

dears, i have purchased a new macbook pro with lion os, then after a while for a notification to update the iPhoto app, and when i tried to update it said that unable to update, then i uninstalled it, then i tried to install it but it said these apps connot be installed on this computer!!!!!
what should i do
this problem started to annoy me, as am not able to edit any photo.
pls help ASAP

Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
Thanks really appreciating your help

Getting random white noise in Premier Pro CS3 audio

I'm working with Premier Pro CS3 on a simple 15 minute slide show with approx. 150 pictures and 3 songs in WAV format. In each of the three songs, I'm getting 1-second bursts of white noise - on left or right or both channels - approx. 3-4 times in each song. When played outside of Premier Pro, all songs are clean with no white noise. None of the songs are too 'hot'; show three have good levels in Soundbooth. I've scanned all of the audio sections in Help and can find nothing that might explain the cause and I'd appreciate some guidance. I've worked with previous versions of Premier Pro for years and have never run into this. Thanks.

Have you updated your Creative driver? That would be one of the first things that I would do.
Next, in Soundbooth, do you see the noise in the Waveform? In PrPro, when you zoom in both vertically and horizontally on the Audio Track, do you see it in the Waveform?
Some folk have had great luck using ASIO4ALL as their ASIO driver. It has cleared up many issues with a broad range of equipment. I do not recall your exact problem, but then I might have missed that one. Note: after you download and install ASIO4ALL, you'll need to go to Audio Hardware and set it as your Input and Output. This driver has been very helpful on the Audition forum, and with all sorts of issues and some very esoteric hardware.
Hope that something helps, and good luck,
Hunt

Strange problem between Prem Pro CS3 and Canon ZR950

I bought CS3 and a Canon ZR950 thinking they were compatible. I ended up having to install Firewire and using the special 4-pin to 6-pin cord. It almost works.
According to Windows XP the drivers for both the "Canon DV Camcorder" and the "Texas Instruments OHCI Complaint IEEE 1394 Host Controller" are working properly. The firewire works properly with other devices. When I place the camcorder in PLAY and insert the cable the computer recognizes it as a camcorder and gives me choices of programs to use - Premiere Pro, Windows Movie Maker, Vegas Movie Studio, and Media Import 8.
I've tried uninstalling the camcorder drivers and when reattached they self install again "correctly". If I use Windows Movie Maker I get a warning "An unknown error has occured" and it stops working. If I use Vegas Movie Studio 9 I get an eror message saying "Microsoft DV Camera and VCR" could not be opened. If I use Roxio Media Import 8 I can get it to start the camcorder screen replay but none of the other computer program controls work and it's doesn' save anything or show up on the computer screen.
The only one that gets to the next step is Premiere Pro. It will actually open and wait for input. When I select Capture the window opens but nothing works until I go to the Settings tab, Device Control, Options button. There I select NTCS, Canon, Standard, and Auto detect. There is no specific choice for the ZR950. It only goes up to Z70. I've tried various settings but it doesn't make any difference.
Here's the strange thing. Regardless of whether I change the options or not, even if I only open up the Options menu and close it again, the controls on my computer screen will now control the camera for playback, foward, reverse, stop but it will only show up on the camera screen, not on my computer screen. In addition, there is no capture going on. In other words, I can use my computer as a giant controller to watch my videos on my camera screen, but that's it.
I suspect there is something wrong with the settings on the camera, but haven't gotten any word back from Canon yet. Any suggestions you can offer here would be appreciated.

Hu Simon...thanks for the answer but how i already writed in my post im on a macbook pro(internal audio card are out of the question)...
anyway are you suggesting that adobe doesnt work well with usb audio devices???
becouse for now i have to stick with it....
if somebody got a suggestion please let me know

Flash Pro (CS3) will not open after file 'AuthPlay.dll" removed from Acrobat 9.

A recent Adobe security issue recommened removal of 'AuthPlay.dll' from Acrobat Pro v9x. When trying to open Flash Pro (CS3) the program throws an error " The AuthPlay.dll/Lib is missing from the configurration folder" and the program will not run. Anyone know of a workaround or a way to open Flash Pro without the dll in question?

Mountain LION is not a supported platform for Adobe Contribute CS4. The supported versions are Latest Adobe Contribute 6.5 and Adobe Contribute CS5.X.

Premiere Elements project imported into Premiere Pro CS5.5 becomes unusable after first save

I have Premiere Pro CS5.5, and I have been trying for some time to successfuly edit an old project that was originally created in Premiere Elements (not sure which version--probably 7.0). It has the .prel extension. The project imports just fine, and I am able to edit it initially. However, if I save my new Premiere Pro project, close Pr and try to open the new project again, I get the "The project could not be loaded, it may be damaged or contain outdated elements." error message. I have tried many of the various project recovery suggestions people have made in this forum and elsewhere online, but none of them seem to work. I even opened the project in XML Wrench, but there were no errors returned when I clicked "check is well formed." Once I close the project after doing some initial editing, it is gone. Is this a known issue? Is there any way I can be able to edit the old project in Pr and save my work? Thanks!

Have you tried using the project manager to re-copy all elements and timeline etc into a totally new directory. I'm just curious to see if that would make a difference. I'd be intrested to see if when making a new project in this manor if it would because as you have stated the normal save methods haven't.

Prem Pro CS3 to Soundbooth problems

When I edit an audio track from a video file in PPCS3 using Soundbooth, I can make changes that are reflected in PPCS3, unless I convert a stereo track into mono.
Anyone know how I can convert a stereo track to mono that is automatically updated in PPCS3?
Cheers

If you have Win7 PRO read A fix via Virtual XP http://forums.adobe.com/thread/702693?tstart=0

Premier Pro CS3 audio playback problems

Hi
Could someone please help with this. I have captured film on a DV tape shot on a Canon XH A1. The sound played very well when on the camcorder, however won't playback on PP even though the wave form is visible. I have doen loads of checks, sound is enabled, have loaded software agian and captured many times. Alos tried capturing audio alone and while the wave forms were visible, I could not hear the audio. PP is OK with sound captured from other DV tapes. The DV tape is not the problem because it has other clips on it which were fine in PP.
This is really important for my work - any advise would be appreciated.

If memory serves, Canons are capable of recording to audio tracks 3 & 4 on DV, which Premiere isn't able to capture. It's the only explanation I can think of for the observed phenomena. Scenalyzer is able to capture these audio tracks, though.

Hard disk system failed before deactivation de Prem Pro cs3 legal

tout est dans le titre.le contact telephone me repond qu'il ne prend plus en charge le produit!
la deactivation a ete impossible,bien sur
merci pour ceux qui savent!
MAURICE

ask for an activation count reset from adobe support.
contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

Prem Pro CS3. Title screen resizes itself.

Each time I open the titling screen it will gradually enlarge the two left hand panels (a little each time I open it) eventually squeezing the right hand side properties panel (fonts etc) down to almost nothing.
I have to keep dragging things back to resize all the time very annoying.
Can anyone please tell me how to stop this annoying fault.
Thanks

Actually somebody presented a "fix" for this.
If I remember right, the "fix" was to put the tools-bin in the bottom of the Title-screen (but it could be somewhere else).
It was a long time ago, but maybe a search will bring up something.
Dag

Audio greyed out after a while

Hi all,
Can't seem to find a definite solution to this. When I keep my iMac on for several days going in to sleep mode every time I leave it for the night I end up with a greyed out speaker icon and thus no sound.
When going into the sound settings and changing between either 'internal speakers' and 'wavtap' it activates the icon again but still no sound. Restarting, unplugging does not help. Plugging in the headphone jack, nothing. out again. nothing.
One time it worked changing. Now it no longer does.
Then strangely enough when typing this message I was still using my itunes and playing a songs and suddenly during a song it suddenly started playing again. Definitely some driver issue.
Anyone a solution that is not about restarting the PRAM?? I mean, there should be plenty of people having this. What is going on? I recently changed to mac it this bugs me a lot.
Thanks guys.

Hi,
Try the following.
Open windows Control Panel, open Windows Update, select 'View update history' in the left hand pane and then select 'Installed updates' link in the following window.
Locate update KB2962407, right click it and select Uninstall. When done, restart the notebook, open windows Control Panel, open Windows Update and select 'Check for updates'. You'll see the update you just uninstalled being offered again - right click and select 'Hide Update'.
After this you may or may not need to delete and reload the Audio driver - if you do, the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Audio stops working after a while (30+ minutes uptime with audio)

I'm having one hell of a time with the audio on my machine hope someone can help...
(edit: forgot to mention, installed packages: pulseaudio-alsa, pulseaudio-gconf and paprefs, using i3 WM and SDDM. Switching to i3 and SDDM are the biggest recent changes I made before this started, although I did pacman -Syu at some point around then too)
Here's what I'm experiencing:
Start up my machine, and usually watch some videos and play some video games.
After things have been running for a while (anywhere between 30 mins and a few hours) I'll quit my game, load up a different video, or do something else that involves quitting an application that plays audio.
From this point on, any new application that are opened (including new tabs in any web browser) will not play audio, even if other applications are currently playing audio.
I haven't been able to reproduce the issue reliably.
I've tried examining the output of "pacmd list", and I thought I had found some differences yesterday between when its working and when its not, bot today the output is different when audio isnt working than it was yesterday. (actually, I just checked again, and now it is the same as yesterday). I can post the output from when its working vs when its not working if that helps diagnose anything. The only differences that seemed significant is that there is a second module called "module-alsa-card" listed after the sound stops working, two new sources are listed for what I believe are my headphones and mic plugged in the rear panel, and a new card shows up which I think is the onboard audio. It almost seems like pulseaudio is taking over my soundcard when I stop using it, and in doing so prevents audio from playing.
There are a couple of times when it just started working again, without me doing anything at all. I'm really losing my mind over this, any advice is welcome!
Last edited by beizhia (2015-05-28 05:15:19)

Hi,
Try the following.
Open windows Control Panel, open Windows Update, select 'View update history' in the left hand pane and then select 'Installed updates' link in the following window.
Locate update KB2962407, right click it and select Uninstall. When done, restart the notebook, open windows Control Panel, open Windows Update and select 'Check for updates'. You'll see the update you just uninstalled being offered again - right click and select 'Hide Update'.
After this you may or may not need to delete and reload the Audio driver - if you do, the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Acrobat Pro asks for serial number after update while being part of CS4 package

Hello, frustrating: I installed CS4 on a new Mac as the old one wasn't fast enough anymore. I deactivated the package (Master collection) on the old one, and activated it on the new one.
Everything works fine. Then there was Adobe updater, updating Acrobat pro. No problem.
But when it launches, it asks for a serial number. And my CS 4 number doesn't work on this. Weird, it seems the Acrobat pro isn't linked to the master collection anymore ? But we did nothing
with the software, just ran the update as suggested by Adobe updater.
PLEASE HELP! as we cannot use Acrobat Pro now and we need to use it!!!
thanks
Maaarten

Hi,
I suppose you have installed Creative Cloud Desktop App, or Latest Adobe Application Manager (http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773).
You can also try following steps:
Launch the product
On Trial Screen click on License this software
On Sign in Screen, click on “Not My Adobe ID” (if displayed), else click on signin (do this even if it shows a valid ID).
Sign in with your Adobe Id
Software should now be lincensed.
Can you please share your adobeID and mail oobelib.log and amt3.log from %temp% on Windows, or /tmp in Mac, if it is still not working to [email protected]
-Priyank

Prem Pro CS3 audio becomes intermittent after a while

Similar Messages

Maybe you are looking for