Premeire Pro is trying to load a 3rd party plug in i deleted

okay, so i downloaded the trial version of prodads plug in called mercalli. its for steadying up that shaky footage. i just wanted to see how well it did. i downloaded it once and couldn't get it to load. i unistalled and then deleted all the files and folders relating to prodad and mercalli. but still, everytime i load up premiere. at the very beginning before you can open up at projects or anything a box pops up and says cannot load/find file pro dad video shaker.dll why is it doing this? i thought i unistalled and deleted everything? what should i do to make this go away? please help me guys. thanks alot! i appreciate it.

okay, nevermind guys. i fixed it. it was another bonus plug in called video shaker that i didn't delete. it was hiding deep within the adobe folders. haha but i found it. thanks though. i just found these forums so im sure i'll be back!

Similar Messages

  • Logic pro 7 can't see my 3rd party plug-ins

    I run Logic Pro 7 on an Intel Core Duo iMac and I have a few third party plug-ins (Waves NPP, Guitar Rig, Symphonic Orchestra) that I'd also like to use with logic, but it seems that logic can't find them - when I go to try and insert one on an audio channel they're just not there as an option to choose - I can only seethe plug-ins that come with logic as part of the bundle.
    Any ideas how I can tell logic how to find them?
    They all use to work fine when I ran Logic Express 6 on my old eMac.

    Your Intel Mac runs Intel code. Before Intel Macs existed, all Macs had PPC processors, therefore all code was PPC code.
    If you don't have UB versions of your software, your software is PPC code, therefore has to run in an emulation mode, which is much slower than native performance.
    You should contact the manufacturers of your plugins to update to UB versions to run them on Intel Macs. Otherwise you have to run everything emulated (under "Rosetta"), which effectively means you're throwing away half (or more) of your available processor power.

  • 3rd party plug-ins are not displayed in channel strip audio unit insert

    I have successfully loaded several 3rd party plug-ins (Wave Masters and IK multimedia Studio Bundle) into my MacBook Pro. The files are shown in Library>Audio>Plug-ins>Components, in User>Downloads, and they appear in my Audio Unit Manager (for each the box is checked for access from Logic Pro). Yet, when I go to a channel strip to launch some of the plug-ins, the product does not show up under audio units. How do I get these plug-in files to the insert list for my audio channels? Unfortunately, I need to launch these plug-ins in order to authorize them with the vendor. I must be missing a key step, but I have not had this issue before with other 3rd party plug-ins. Thanks for any direction.

    Also, I know in the case of my IK Multimedia Classic Studio Reverb, it will NOT be available from within my 3rd party plug-in list, on a MONO channel.
    I need to be opening the list on a stereo track (or stereo Aux), in order to be able to select those plug-ins.
    See if it's something that simple...

  • How do I stop Logic Pro X from trying to load a 32 bit plug-in that's no longer installed

    How do I stop Logic Pro X from trying to load a 32 bit plug-in that's no longer installed?  I noticed it occurring on projects where I used Miroslav Philharmonik. I keep getting prompted when opening the projects. I uninstalled Miroslav thinking it would stop, but it didn't.

    Assuming you are talking about the boxed set of Logic Studio (Logic Pro 9) on DVDs the only solutions are to either borrow or purchase an external CD/DVD drive and use that with your new MBP.
    Amazon sells a very reasonably priced 'Amazon Basics' external CD/DVD drive suitable for the process...
    http://www.amazon.com/AmazonBasics-Portable-External-Optical-Drive/dp/B003M0NT1M /ref=sr_1_1?ie=UTF8&qid=1416924310&sr=8-1&keywords=CD+DVD+external+drive+amazon+ basics
    Do NOT try and copy Logic across from your Mac to your MBP using something like Time Machine or Migration Assistant... 99% of the time, doing so results in all kind of weird issues later on.
    Just install Logic pro 9 plus all it's content from scratch using the DVDs provided with Logic Studio Boxed set.....

  • Pc is not recognising PDF file ( icon ) in emails and to open these it is loading a 3rd party program on the web. I have installed Adobe several times. To open my files I need to drag them to my Adobe program. any ideas??

    Pc is not recognize PDF file ( icon ) in emails and to open these it is loading a 3rd party program on the web. I have installed Adobe several times. To open my files I need to drag them to my Adobe program. any ideas??

    Hi aadeshs
    This problem is on my laptop  running Vista ( Business) on Adobe 10.0  ,   for many years I did NOT have a problem with this . No forum Pages on this. 
    Also i would like to know how screen readers can better interact with PDF as my wife has difficultys on some email attachments on her laptop , again there seems no easy avenue for someone in her situation surfing websites and forums  for Hours maybe ok ok for sighted people, but not if you are blind & use a screenreader.  No Support Help from Adobe is available.
    thanks
    oliver654837

  • How to PERMANENTLY get rid of 3rd party Plug-ins in Logic pro 9.

    Hi, im trying to get rid of some 3rd party plug-ins on logic, but it only looks like i can disable them. (sweeping them under the rug isn't helpful) This is a problem because i have one version of a plug-in that doesn't work and im gonna get another of the same version (with expansions) to replace it so im concerned that the 2 versions will conflict with one another and i wont get the expansions i payed for. Anyone have a solution to permanently get rid of plug-ins? -Tim

    The component files of the third party plugins are in:
    Local Drive\Library\Audio\Plug-Ins\Components
    You can make a backup of a given component (say in a desktop folder) and replace the component with other version etc.
    You can use [Pacifist|http://www.versiontracker.com/dyn/moreinfo/mac/12743] as well to install/extract a component from a given installation pack etc.
    Edit: Sorry Immo I duplicated your reply solutions hitting posting a few sec. later...
    !http://img59.imageshack.us/img59/4967/aglogo45.gif!
    Message was edited by: Vacheto

  • CoreAudio: Plug-in "insert 3rd party plug in names here" Not Available

    Hey guys, hoping you can help me with this one... been trying to read up on it a little and I've tried a couple of the suggestions that were made to no avail, the problem still is there.
    Basically, Logic isn't recognizing any of my 3rd party plugs that were working fine for a few months until a couple days ago. TC Powercore PCI, NI Kore 4, Arturia Mini Moog V, Sonalksis TBK's and a couple others are all not being recognized... They all were fine, now Logic won't recognize them.
    I ditched my Logic Pref's, re-installed all my plug's, repaired permissions... yet still, I get the "not available" story. If you guys can possibly help me out, I'd greatly appreciate it.
    Thanks,
    B
    G4 Dual 1.25   Mac OS X (10.4.10)   2 Gigs Ram / Logic Pro 7.2.3

    Hi,
    A couple of days ago... sounds like you did an Os update, to 10.4.10
    Which includes the 10.4.9 "fixes", which include a NEW and IMPROVED Logic Plug-In manager thingy.
    Which is why your Plug-Ins are not compatible anymore...so...
    Do a search in this very forum, and find how to fix the 10.4.9 issue.
    Hint: you'll have to re-download the OSX update manually, and re-install that.
    You'll spend time on this, but come out the wiser... ie don't let Apple's Auto-Update update anything, until you know for a fat it will not ruin your Logic experience.
    Welcome to the brave new world of still doing things manually.
    Cheers

  • Problem with 3rd Party Plug-Ins

    I am running Logic Pro 7 and recently a majority of my 3rd party plug-ins quit working. When I try to load the plug-ins or open a song that uses the plug-ins, Logic unexpectedly quits. Some of the plug-ins that cause the problem are:
    Spectrasonics Trilogy and Atmosphere
    Plugsounds PS01-06
    Ueberschall BPM120 and PLP120
    Native Instruments Kompakt
    This has happened before, but for some reason within two or three weeks, they just magically started working again. I could use an update on my OS (10.3.9) and some updates are available for the plug-ins, but why wouldn't everything continue to work as it had if nothing has changed? And is this absolutely necessary because I'd rather not because I'd have to update everything.

    Did you update or change ANYTHING on your system? I've learnt that once I have a stable system, DONT upgrade unless you HAVE to, as updated plugins are designed to work on the most recent software, and sometimes dont get tested and/or work with "older" systems.
    However, if you have not changed anything and are getting these problems, the most likely cause is either song corruption (though you said this is happening on multiple songs, so I doubt thats the problem) or preference corruption, which happened to me just a few months ago. Dont ask me how things get corrupted, but when they do you start to experience random weirdness. For example, recently all my songs stared giving me "memory errors" on stuff that use to playback fine. Once I rebuilt my preferences, every was stable again.
    Here is a link to troubleshooting tips created by Bee Jay (a wise poster here). Follow them and they should fix your problems:
    http://logicquicktips.blogspot.com/2006/10/troubleshooting-logic.html
    Note: if you created any custom key commands for logic, do not trash your old preferences, as you can import your key commands from this file. Check your manual under import key commands. Here is a link to the PDF of the manual, which is easier to search:http://www.apple.com/support/logic/
    If you want to turn off your plugins just to see if they are at fault (though it sounds to me like song/prefs corruption, not plugin problems) use the AU
    manager. I'm not in front of Logic right now, but I believe its under either the apple pulldown menu, or the file menu, or one of the other menus "up top."
    (sorry for my bad description). If you still cant find it, let me know and I'll look it up, but as I said, this sound like a corruption issue and not an issue with your plugins.
    Best of luck!

  • No RT Playback of 3rd Party Plug ins...

    I've been trying to add a Primatte V4 green screen plug in to the short gs clip in my timeline. When I try to playback w/out rendering it kicks up the message cannot display RT(Unlimited-Dynamic-Dynamic are setting in RT-I've tried to lower it but still kicks out).
    If I use the built in Keyer it works viewing low res but it works(even with a garbage mask). Primatte was able to pull a cleaner key with one clip so it would be very helpful to be able to use Red Giant Primatte. Also this is an artist lip syncing for a music vid. So being able to match the green screen clips to the music is necessary(i guess i could cut it then key it-Is this how most ppl do it in the nle...)
    So my question is where is my system lacking to be able to drop 3rd Party Plugs like Red Giant Primatte Ver.4
    Mac Pro 2008 - 8GB Ram
    Stock Vid. card
    8 drive Raid5 via Highpoint Rocketraid 3522(seagate 7200.11 32mb cache)
    I also have an infinity pro card(intended for previewing to an ext. lcd display
    Am I missing something or is real time just not possible on a base macpro 2008 configured the way I have it...?

    Set your RT to unlimited and turn off the Warn on dropped frames.
    Patrick

  • "3rd Party Plug-Ins" Not Showing Up In Preference Pane...

    I'm trying to install a couple of 3rd-Party Plug-Ins... Apparently the procedure for this is to go to Preferences, and in the "General" pane, there should be a heading that says "3rd Party Plug-Ins" along with buttons "Choose..." and "Clear" and a path.
    On my General Preferences Pane, there is no such section... It goes right from "Content Library & Templates" to "Media," with no "3rd Party Plug-Ins" listed anywhere in the pane.
    Using Motion 3.0.2.... Did something change and they didn't change the manual to match? Or is there some setting elsewhere that's making that option disappear?
    Thanks!!!
    Nick

    Howdy,
    The "3rd party plug-ins" section in the Library and preferences really refers to AE plug-ins. Third-party FxPlug plug-ins (like dvMatte or Boris Continuum) show up mixed in with the regular filters and generators.
    That "3rd party plug-ins" path setting in the preferences doesn't appear on Intel-based Macs, as they're no longer supported. If you have a PowerPC system, they'll show up (and so will the setting).

  • How will FCPX implement 3rd Party Plug-ins?

    From a Professional standpoint, the current version of FCPX is unusable on so many levels due to the absence of basic features that made FCP series the juggernaut it was until yesterday.
    Here's my prediction of HOW Apple plans to distribute Plug-ins and Add-ons:
    Apple is pushing towards a single, universal OS -- most likely a glorified iOS. And they're forcing FCPX users to upgrade to Lion so they have Appstore on their machines just to buy FCPX. Matter of fact, theyi're seeing more profit from Appstore/iTunes than their own computers! Ever since the success of the Appstore -- Apple/Jobs has been pushing to create products and services that will bring even more profit to the Appstore/iTunes business model.
    Hence the release of the iPad and the development of iPad apps -- and the move to with OSX Lion.
    The reason for this is so that Apple can take their flagship software like FCP --- and monetize all 3rd-party plug-ins and add-ons.
    SO, once Apple has a consumer using FCPX, if they want Multi-cam or Import/Export features -- you will have to buy it as an add-on and sell all FCPX plug-ins and add-ons THROUGH THE APPSTORE.
    Furthermore -- Apple will most likely force all 3rd-party developers to build plug-ins for FCPX as an APP -- and sell it THROUGH THE APPSTORE -- where Apple gets 30% commission -- stealing that money away from the developers, who in the past with FCP7, you were able to purchase directly from the developer.
    SO -- FCPX isn't a revolution in editing....
    FCPX is a revolution in MONETIZING FINAL CUT PRO PLUG-INS through the APPSTORE!

    Apple is pushing towards a single, universal OS -- most likely a glorified iOS.
    No they are not. OS X is a far more developed, powerful and mature OS than iOS. There is no sign that it is being some reduced in power in any way.There's a whole lot of fokks claiming it is simply because a few interface features from iOS are being added  - note added - to OS X.
    And they're forcing FCPX users to upgrade to Lion so they have Appstore on their machines just to buy FCPX.
    Well I hate the argue but that's factually untrue as well. No FCPX users are not forced to upgrade to Lion. Snow Leopard users can buy FCPX today, long before Lion is introduced.
    Regards
    TD

  • How do you install 3rd party plug-in in Photoshop CC

    Our fine customer service/tech support wouldn't help me with my question/problem because 3rd party plug-ins are not an Adobe product.... Silly, isn't it since all I want to know is how do you install "any" plug-ins into Adobe Photoshop CC. Can anyone with any sanity here offer a solution?
    Thanks.

    It could be complex depending on your OS and user ID permissions.    Adobe Photoshop CC Mac version only supports new Mac with Intel 64bit processors, Photoshop CC windows supports  both 64 bit systems and 32 bit systems.  If you have a 64 bit system both the 32 bit and 64 bit version of Photoshop are installed so windows has both a 32 bit Plug-in Folder and a 64 Bit Plug-in Folder.  Prior to CC Photoshop Preference let you add you own Plug-in folder tree to Photoshop Plug-in folder tree.   I still install Plug-in that way however I have to add the link manually for adobe removed that option from its Preferences UI in Photoshop CC.  I always have more the one versions of Photoshop and all installed versions use the same Plug-in, Actions and Scripts that I add to Photoshop.   There is One exception.  The Way the Image Processor Pro plug-in script is coded expects it and it default XML file to be installed into Adobe's folder so I made and exception for it.   You user ID need to have permission to modify and add files to system folders if you want to install plug-ins into the folders that Adobe created for third party plug-ins to be installed into.
    Adobe Photoshop CC installer creates a folder in  Photoshop version   ...\Plug-ins\... so on my Window 7 64 bit system there are two folders
    "C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\" and
    "C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Plug-ins\"
    All I add to these are the Adobe ScriptListener.8li Plug-in and a link to my  Plug-ins folder.

  • CS5 & 3rd Party plug ins

    I have PS/CS5 (standard version, not extended) and I have not upgraded to Lion as of yet.  I have OnOne, Topaz and Nik plug ins that I use every so often.  Has anyone used PS/CS5 with the various plug ins with Lion?  And if so did you have any trouble?  Our local Apple resale store said to wait to see if the companies who make the plug ins have an upgrade before I upgrade to Lion.
    Thought I would see what experiences anyone has had.
    Thanks,  Sue

    They sort of say DON'T USE OLD 3rd party PLUG INS!
    "As with all previous versions of Photoshop, don't copy old third-party plug-ins, or plug-ins from previous versions of Photoshop, into the Photoshop CS5 plug-ins folder.  If you have set the Additional Plug-Ins Folder in the Plug-Ins preferences to a folder, deselect this option."
    Well where the heck are they supposed to go then?  :-/   Their installers put them in the Plug-Ins folder...
    I found for the couple I really wanted to import, and tried, once in 32 bit mode on startup (Switch this under "Get Info" for those reading along) -  they worked just fine.  Yes, 64 bit would probably be better, but I suspect that in many cases 64 bit "upgrades" aren't free - even though the features are no different.
    For now, for my needs, this works and has been solved - thanks!

  • Using native Logic OSC support with 3rd party plug-ins & new touchOSC maps

    Hi All.
    Now that logic from 9.1.2 has native OSC support, I wandered if anyone has used it succesfully with their own customised touchOSC maps?
    I'm not so interested in using touchsc as a transport/mixer for logic - which is what the default logic map that comes in touchosc s focused on, but more to control a few 3rd party plug-ins inside logic (FXPansion Geist & Strobe) - which would mean I need to create my own maps. It doesn't seem clear however if or how you can edit or use touchOSC maps which use the native OSC support bult into Logic
    Anyone had any joy with this, or able top shed some light on possibilities & limitations?

    For now they are OSCulator reliant, and that has some advantages: primarily that the user can easily remap anything that doesn't suit their needs. I've been using these for weeks and the combination has been rock solid so I wanted to go with it rather than wait for (and learn) the SDK.
    The best part is that these bundles will include everything you need, including custom Kontakt multis, VSL matrix files and of course the OSCulator mappings - and building those may have caused carpal tunnel syndrome! Talk about a mammoth task... Anyway, the goal is for it to be an easy plug & play experience.
    Trying to wrap up today or tomorrow - just waiting on some website reorganization...
    Stay in touch!

  • Importing 3rd party plug-ins into CS5

    Coming from CS3, I've tried drag and drop but no joy. 
    How do I get my plug-ins/filters moved over - or do I have to continue to use CS3 if I want to use them???
    It's been some time and I'm not sure I even have the original installers or not - it would take some real hunting around to find them if I did.  Some don't matter if I lose them, while many are used often.  There *should* be a simple drag and drop, migrate or import function for this - where is it?

    They sort of say DON'T USE OLD 3rd party PLUG INS!
    "As with all previous versions of Photoshop, don't copy old third-party plug-ins, or plug-ins from previous versions of Photoshop, into the Photoshop CS5 plug-ins folder.  If you have set the Additional Plug-Ins Folder in the Plug-Ins preferences to a folder, deselect this option."
    Well where the heck are they supposed to go then?  :-/   Their installers put them in the Plug-Ins folder...
    I found for the couple I really wanted to import, and tried, once in 32 bit mode on startup (Switch this under "Get Info" for those reading along) -  they worked just fine.  Yes, 64 bit would probably be better, but I suspect that in many cases 64 bit "upgrades" aren't free - even though the features are no different.
    For now, for my needs, this works and has been solved - thanks!

Maybe you are looking for