Premere Elements 8 on (Windows 7) 64 bit version

I've seen alot of complaints about Premere and Windows 64 bit on other forums. Many are older versions, 4 and others. I'm currently running it in 32 bit Vista but I can't always leave good enough alone. I seen the new desktops at Walmart and found most come with the new Windows 7 in the 64 bit version along with a 6GB ram capacity and I thought I'd put the question out there.
Premere Elements 8 on (Windows 7) 64 bit version
YES or NO

Ok I think I know the reason for this.
Toshiba provides a password plugin with their finger print manager software. After I updated my laptop with the finger print manager, Firefox stopped working, like described above.
Solution is pretty easy:
1) Boot firefox in safe-mode
2) Go into Tools->Add Ons->Extensions
3) Hit disable on the 'Automatic password input in FX 1.0' extension
4) Restart firefox in normal mode

Similar Messages

Windows-7 64 bit version

I am about to download Windows-7 64 bit version on a separate partition as a dual-boot system. Will Adobe Premiere Elements 7 work if I install it there? (Will I find my edites, etc.?) Thanks.

That is probably a very wise decision, even if your CPU would handle 64-bit. I'm a firm believer in waiting until SP-1 for a given OS, before adopting it. There are too many horror stories in my past. I also do not bother doing any beta testing, as I need all of my computers for work.
With new technology, both software and hardware, there are dangers being out on the "cutting edge." This is often "blood" on that edge, and I do not want it to be mine.
Good luck when you build, or buy. So far, the reports on Win7 RC seem very favorable. Here's hoping that it will be the best release of an OS by MS in many decades.
Hunt

How can I get a Windows Vista 32 bit version of Photoshop, please?

How can I get a Windows Vista 32 bit version of Photoshop, please?

Hi Kevinhannan,
No current Photoshop supports this configuration.
Photoshop CS5 was the last version of Photoshop to support Windows Vista.
Photoshop Elements 12 was the last version of Photoshop Elements to support Vista as well.
We no longer offer Photoshop CS5 or Elements 12.
You might look at Amazon to see if you can get either product listed above. Just be careful when purchasing, make sure you know who you're buying from!
Regards,
Pete

ITunes for Windows 7, 64-bit version not connecting to iPod

Hi, everyone! I'm having problems connecting my iPod Touch to iTunes version 11.0.1.12. I'm running Windows 7, 64-bit version on my PC. Whenever I open iTunes with my iPod Touch connected to my PC, iTunes immediately gives me the following error message:
"This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."
This confuses me because I already have the 64-bit version for Windows 7 installed on my PC. I've already uninstalled and reinstalled the 64-bit version three times; however, I'm still getting the same error message whenever I connect my iPod Touch and open iTunes.
Any help would be greatly appreciated. Thanks!

now nothing happens when I connect the iPod by USB - it's not even charging.
Do you have a laptop, Nin?
If so, the following document might be of some assistance with that:
[iPod not recognized when connected to Windows laptop over USB|http://support.apple.com/kb/TS1401]
(That issue seems to match your recognition and charging symptoms.)

ActiveX problem in windows 7 64 bit version...

I have x64 bit windows 7 version operating system i used my all report as printmode="Activex"
1. http://i41.tinypic.com/k9861g.png
Check this URL.
I just want to know after installed the printconrol.dll, how the printcontrol.dll get registered / also in register
entry.
Let me know the procedure...
2.i hAVE INSTALLED THIS Crystal Reports Basic for Visual Studio 2008 x64 Redistributable Package (64 bit) IN MY
WINDOWS 7 64 BIT VERSION ON MY LOCAL PC WHICH HAS NO INTERNET ACCESSS
FROM THIS LINK
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap
(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes
%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636
453735364436323635373233443330333033303331333633343335333033303336%7D.do
YOU HAVE SHOWN HOW TO REGSITER FOR vs2010..
regsvr32 "%programfiles(x86)%SAP BusinessObjectsCrystal Reports for .NET Framework 4.0CommonCrystal Reports
2011crystalreportviewersActiveXControls
BUT IM NOT FINDING THE PATH LIKE the above TO REGISTER MY PRINTCONTROL.DLL IN WIN7 64BIT AFTER INSTALLING Crystal
Reports Basic for Visual Studio 2008 x64 Redistributable Package (64 bit)
so would you please tell me how the above location comes for you..? to REGISTER DLL for us we are not getting the
location in my pc.
3. I COPIED PRINCONTROLL.DLL IN D: drive of win 7 64bit THEN I USED rEGSVR32 D:PRINTCONTROL.DLL IT SHOW DLL
REGSITER succesfully on clicking print button in CR toolbar the print dilogues comes get disapper?let me know whats
the problem. I applied the same pocedure on windows xp machine it works fine..
4. I have printcontrol.dll in downloaded prgram file. I just want to register the dll, it is no registering, please
let me know how to register.
thanks lot to Ludek Uher and Don Williams hows support are very good.. I hope i will get all the aboves in details

1) After Installing this software https://smpdl.sap-ag.de/~sapidp/012002523100009351332008E/CRBasicVS2008_redist_x64.zip what i have to do let me know other steps and will active x print control works or i have to do some more things...
2) i asked you above if i have internet in win 7 64 bit pc on clicking print button it shows me this dialogue
http://i41.tinypic.com/k9861g.png
after clicking Install Printcontrol.dll it goes to C:\Windows\Downloaded Program Files so how it register i want to know..?
2 point is my important want....
Thanks for your quick reply
Edited by: Priya_here on Nov 16, 2011 6:14 PM

For the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

for the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

Then you might check at any of the other university book stores or software stores or any computer store in town for the 64-bit version.
If you want to use the 32-bit version from the school (you probably get it for free or very cheap) then you could purchase Parallels and run it as a virtual machine concurrently with OS X. There are some caveats:
1. You have to purchase Parallels (there may be an academic discount.) List is $79.95.
2. Your computer needs minimally 4 GBs of RAM, but realistically 8 GBs would be better.
3. Parallels creates a pseudo-drive on your hard drive. It could easily require 50 GBs of disk space.
Accommodating these might be more costly than buying 64-bit Windows 7. And, if you look online you may find them with an academic discount (or may be able to order it through the school.)

How can I reinstall Bluetooth drivers after loading windows 7 64 bit version on my 2010 iMac?

I have just uninstalled windows 7 32 bit version which I have been using for ages and upgraded to the 64 bit version. I did this from the windows partition in my bootcamp divided hard drive. I then reinstalled the drivers using the application DVD which came with my machine but the Bluetooth driver is missing. One thought I have is whether I would be able to use the driver DVD which came with my 2011 MacBook Air (which has been running fine on windows 64bit version since I bought it)
Would this work or any other ideas?

moirl wrote:
5. I can not get anything off the Blackberry (photos etc.).
As was stated above:
1. Go to Options >> Media Card (or Memory)
(some themes or BlackBerrys may call this "Settings >> Media Card")
2. Check the following settings (if they are not listed this way, then change to reflect the following:
a) Media Card Support: On
b) Mass Storage Mode Support: On
c) Auto Enable Mass Storage: Yes
3. Save the settings and exit
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Adobe Acrobat Standard 9.3.1 loads pages very slowly with Windows XP 64 bit version

Our company has purchased Dell Precision T3500 workstations with Intel XEON processor and 6 Gb of RAM. The operating system is Windows XP 64-bit version. The systems came with Adobe Acrobat Standard 9.3.1. Each one of these workstations load PDF files into Acrobat very slowly. Does anyone have a answer why?

Quote
Originally posted by Some1ne
Here's a step-by-step description of how to install the RealTek RTL8169/8110 driver, as the process isn't quite as straightforward as it should be:
1. Download the Windows AMD64 Drivers available here:
http://www.realtek.com.tw/downloads/downloads1-3.aspx?series=16&Software=True
2. Extract the files in the archive to somewhere like c:\win64drivers\ethernet
3. Once inside Win XP 64, do the following:
a. Click Start -> Settings -> Control Panel -> System -> Hardware -> Device Manager
b. Go down to the "Other Devices" section (they'll have yellow ?'s)
c. Right click on the ethernet controller and click "Update Driver"
d. Click "Install from a list or specific location (Advanced)"
e. Click "Dont search. I will choose the driver to install."
f. Double click the "Network Adapter" entry, and then click "Have Disk..."
g. Select the directory which you extracted the driver files to
i. You will get messages saying that Windows cannot verify that the driver matches your hardware, and that the driver is not WHQL certified. Ignore these and click "Continue"/"Install Anyways" and your RealTek RTL8169/8110 ethernet adapter will spring to life
after i have done this the pc just stops. and if i reboot it stops at the loading screen :/ can you tell me whats wrong i got a k8t neo serie card and windows 64 bit edition
edit: i did it :D works now

I have Windows XP, 32 bit version 2002 Svc Pack 2 and when trying to download iTunes 10.5 I am getting the following "The older version of Bonjour cannot be removed. Contact your tech." I've tried a good number of remedies to no avail. Can anyone help?

I have Windows XP, 32 bit version 2002 Svc Pack 2 and when trying to download iTunes 10.5.1 I am getting the following "The older version of Bonjour cannot be removed. Contact your technical support." I've tried a good number of remedies to no avail. Can anyone help?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you are running 64-bit Windows and the above steps haven't helped try installing the version of iTunes that can be downloaded from this support document. iTunes 12.1 for Windows (64-bit — for older video cards)
If you still have no luck try reinstalling iTunes 12.0, links in the user tip.
tt2

Elements 10, windows 8, 64 bit, epson artisan 835 printer: prints are really dark even after using enhancements like adjusting lighting. Prints are darker than photoshop edit screen. Prints are acceptable using paint, windows photo viewer, or gallery.

Elements 10, Windows 8, 64 bit, Epson Artisan 835 printer: Prints are really dark even after applying enhancements, like adjusting lighting. Prints are darker than Photoshop Edit Screen. Prints are acceptable using Paint, Windows Photoviewer, or Photo Gallery.

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

I want bootcamp windows7 support software for MacBook Air (mid 2011) , if any one has a windows 7 (32 Bit) version

I want bootcamp windows7 support software for MacBook Air (mid 2011) , if any one has a windows 7 (32 Bit) version? Please advise. Thanks in Advance.

Hi Syednz,
If you are looking for the BootCamp Support Software for your MacBook Air, you may find the following articles helpful:
Boot Camp: System requirements for Microsoft Windows operating systems
http://support.apple.com/kb/HT5634
Apple Support: Boot Camp Support Software 4.0.4326
http://support.apple.com/kb/DL1636
Regards,
- Brenden

Installing oracle 9i database in windows x 64 bit version

Friends, I face difficulties in installing oracle 9i database in windows x 64 bit version 2003 server. The same had worked well with 32 bit version. I could install database and work in the same system in command prompt but the same could not be connected from sqlplus moreover DPCA,Netconfiguaration assistant all are not coming in the graphical way and i couldnt able to connect from the network. which brings ora-06413 error.
please help me to get installed oracle 9i database in windows 2003 server 64 bit version.

Go Through Below link
>>>http://www.oracle.com/technology/software/products/oracle9i/index.html

IPhone 3GS can't share internet connection with a windows 7 64 bit version?

I have an iPhone 3GS with the latest iOS installed, then the personal hotspot option is ON and it shares internet connection to a laptop with Windows 7, 32 bit version and with the latest version of itunes installled (10.6.1.7).
But when I connect this same iPhone to another laptop with Windows 7, 64 bit version with the latest version of itunes 64 bit, there is no internet sharing, no error, no signal of fails, it is just as if the hotspot option were OFF.
Its is posible to share internet from iPhone 3GS to a PC with Windows 7, 64 bit version?

Hey there @slee , welcome back
I would suggest trying the steps in this guide for the installation troubles you are having on your one specific Windows 7 computer.
Windows 7: The Progress Bar on the Software Installation Stops or Stalls
You can also try disabling your firewall while you run the installation to see if that helps.
Let me know the results!
Have a great Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

No LaserJet M1319f software bundle for Windows 7 (64 bit) version.

Does anyone know if HP is going to have the entire software bundle for the HP LaserJet M1319f Multifunction Printer under the Windows 7 (64 bit) version? After updating my software,firmware and drivers for my new Win7-64bit pc I realized there was no software bundle installed. The drivers installed and I can print but no other software. It looks like they have it for the Win7-32bit and I tried to install it just to see if it would work and of course in errored out incompatible. Any information would be appreciated.

Below is a link to the HP site to download the printer software for Win 7x64. You will also notice an option to download a printer firmware update that is available for this model printer.
I hope this helps..
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3547...
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

Compatibility of Quicktime and Windows Vista 64 Bit Version

I am currently using Win Vista Home Premium 32 bit. However, I'd like to try the 64 bit version (which I have).
I see the latest version of Itunes is compatible with Windows Vista 64 bit versions. However, that does not appear to be the case with Quicktime. Can anyone confirm this?
If Quicktime is not compatible with Vista 64 bit, is the so called Quicktime Alternative a viable solution?

Hi,
bellow is the link for the latest software download for win vista :
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2100&lc=en&cc=us&dlc=en&sw_lang=&product=3053...
I work for HP but my posts and replies are my own.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Premere Elements 8 on (Windows 7) 64 bit version

Similar Messages

Maybe you are looking for