Premier 13 stops working when existing project is loaded (after uninstalling Premier 9 where the project started)

I started a project using Premier 9. Then I upgraded to 13, edited and saved my existing project several times successfully. Decided that it appeared 13 was working well and I no longer needed 9 and 11 (both Photoshop Elements and Premier Elements) so I uninstalled them using the Control Panel app. Now 13 stops working when I try to load my project.
I have since uninstalled/re-installed/rebooted everything in various sequences many many times with no luck. I even purchased and installed another copy of 9 (since the original was a download and I could not find my notes & serial numbers)! The 9 install encountered a problem "an installation process has encountered an error while installing", it stopped, then rolled the install back so I have nothing for 9.
HELP
Paul L

PaulL
Probably good idea to recreate the version 9 project in version 13. Investment of time in troubleshooting version 9 is questionable as you say.
At this point, I would leave Premiere Elements 9.0/9.0.1 installed, just do not open it.
When you are between Premiere Elements 13 projects and you want to get rid of Premiere Elements 9.0/9.0.1,
consider
1. Deactivate the program from an opened project's Help Menu/Deactivate...close out of the program.
2. Uninstall the program the usual Control Panel way
3. Do a free ccleaner run through (regular cleaner and registry cleaner parts) to get rid of leftovers from incomplete installs or uninstalls.
CCleaner - Download
Note: Deactivation is not the same as uninstall.
Critical - after a project is saved closed, never move, delete, or rename files/folders that were imported into the project after the project's save close.
When you import files into a project, all you get are copies of the originals. But, those copies need to trace back to the originals in the location where
they were when they were first imported into the project. More on that later as indicated.
Please let me know if any questions or clarification needed on any of the above. Are there any Elements Organizer consideration in any of this?
If so, I would convert the Elements Organizer 9 catalog in Elements Organizer 13 before uninstalling Premiere Elements 9.0/9.0.1.
Thanks for the follow ups.
ATR

Similar Messages

Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner sti

hi

Since about 2 weeks ago for no apparent reason, the internet on my iPad suddenly stopped working (when I open Safari, it says: "Safari cannot open the page because it is not connected to the Internet"), even though the Wifi icon in the top left corner still shows full signal. However, I noticed when I went into Wifi settings (Settings>Wifi) that there is no checkmark next to my network name (only the spinning circle icon, as if it's trying to process something). This only happens at home (I can browse the internet while connected to Wifi at university). My other Apple devices (MacBook Pro and iPhone 4S) work perfectly fine at home.
I've tried resetting my router, restarting my iPad, resetting Network Settings on my iPad, and tried following Hynes' instructions on this thread:https://discussions.apple.com/thread/2453187?start=15&tstart=0, but nothing has worked so far (although I have to admit that I found the instructions on that thread somewhat confusing, so there is a chance that I accidentally did not follow them properly).
Could someone please help? It'd be VERY much appreciated.

HT1430 For some unknown reason my Apple ID password does not work when trying to down load books from the IBook or Nook Apps. It also has stop work when trying to down load new Apps. Any suggestions out their???

For some unknown reason, my Apple ID Password does not work when trying to down load IBooks, Nook books, or new Apps. Everything else seems to work. Any suggestions out their???

I appreciate the info and realize that the Nook App is not related to my Apple account but this too has stopped working. My situation first started with the Nook App not down loading and then has now spread to my IBook and new app downloads. I have checked into my ITunes account and the ID and password are correct and at times when I am asked to submit my Apple password such as setting up this Apple Support Community the ID and password work. My problem seems to be just with trying to use my ID and password when wanting to download new books or apps. I can go into the IBook, Nook, and App stores and seemingly download an item but when clicking on the new book or app nothing happens and I get a message that states it can not get into the ITunes store and it wants me to either try again or cancel. This message appears usually ten minutes after I have tried to make a purchase. At other times when I attempt to download a book or app I lose the screen and the IPad goes into the opening screen. Short of redoing my Apple account or deleting an app and attempting to reload the app (but this won't work because the App store won't load new apps) I don't have a clue what to do.

External speakers stopped working when Yosemiti was down loaded

My external speakers stopped working when I downloaded Yosemiti! how can I remedy this?

Dunno what it has to do with Yosemite, but: press the alt/option key, while clicking on the speaker icon at the right hand top of your screen. This will show you all the sound inputs and outputs for your mac. Ensure that it is set to "Line Out" or "Digital out" (depending on your speaker's capabilities. Hopefully
that works
John B

ITunes12 stops working when syncing with iPhone5. It can't copy the files. Tried everything; uninstalling, re-installing, updating... Still the same. HELP Please? :'(

This just happened a day ago. It was when Windows failed to update. When I plugged my phone to the laptop, there seemed to be a pop-up box appearing in iTunes saying, "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available" At first only the album artworks of the songs were not copied. I tried uninstalling and re-installing it using the instructions from here: Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support. But still, it did not work. That's why I though t that maybe because Windows wasn't able to update that's why syncing keeps on crashing.
However, after that failed update yesterday, I was able to update Windows 8.1 today. After that, I tried uninstalling and re-installing iTunes. I cleared up everything even the contents from the library to start anew. After that, I tried syncing it with my phone hoping that it would finally sync. Unfortunately, that evil pop-up window appeared again.
I really don't know what to do about it. I've been using iTunes for how many years already and I have never experienced crashing.
And about that solution, well Windows haven't notified me yet. And I doubt if they will.
I really hope that someone out here could help me solve this problem. I've been stressing out about this the whole day. It's just so hard because there are a lot of files that I lost, especially music. </3
Thanks

Hi shararara,
Welcome to the Apple Support Communities!
I understand that you are receiving an error that iTunes has stopped responding. I know you have already tried some treat troubleshooting, but in this situation I would suggest working through the steps suggested in the attached article.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Best regards,
Joe

My itunes stops working when i try to add a music file to the library. how do i fix this?

when I open iTunes and try to add a music file to my library from my computer, I slecet the song and click open and then it just comes up with the error message saying that iTunes has stopped woking and closes the program... ive tried everything- uninstalling and reinstalling the program and even disabling my antivirus software. I have no other ideas about how to fix this?

If you are still having this problem, the fix below takes care of it. It was posted in another conversation by Sony Singh. I did it, rebooted, and all works!!
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
Hope this helps or you've already done the fix, especially since you posted in October.

Drag and drop feature stopped working when updated to Aurora 18.0a2. What is the problem?

Cannot drag and drop letters on Words With Friends on Facebook, or Yahoo Fantasy Football.

biggsbdavis:
Try disabling and then re-enabling the Helvetica font. Sometimes that's all it takes.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

Adobe Stop working when I open two PDF Files.

I am using the Adobe Acrobat 11.0.03 on my desktop running win-8. The big issue for me is that the adobe just stop working, when I tried to open two PDF files at the same time. But it is fine when I just open one. So could any one give me same advise? Thank you very much.

Hi, Stacy:
I am using the Adobe Acrobat XI. Currently, it works perfectly when I only open one PDF file. If I try to open two files at the same time. the Adobe Acrobat just stop working and shows "Adobe Acrobat has stopped working".
It is so frastrating becasue I always need to open and edit multiple PDF file at the same time.
I really hope I can get some helps.
Thank you, Stacy.

Why does AirPort Extreme stop working when I plug in a USB hard drive?

Why does Airport Extreme stop working when I plug in a USB hard drive? The USB drive has its own power supply. I've tried isolating the hard drive from Airport using a powered USB hub to no avail.

The USB port on the AirPort Extreme is borderline as far as its ability to supply adequate power to a hard drive. Another way of saying the same thing is that this is not a high power USB port, like you would find on a computer.
Your 2TB drive likely requires a bit more current than the USB port on the AirPort Extreme can supply. It is also possible that the drive's firmware may not support a network USB connection....only a "local" connection to a computer. Check with Seagate support on that possibility.
Try using a powered USB hub with the 2TB drive....and make sure that the drive is formatted correctly in Mac OS Extended (Journaled) or FAT32....which the AirPort Extreme USB port can accept.

Project stops working when attempting to change working times

Project stops working when attempting to change working times. I'm running a 1000+ task project, fully resource loaded with multiple resource calendars. After two months of normal operation, it now appears that Project has deleted (or corrupted)
one of the base calendars that several of the resources use. Now, when attempting to change working time for a resource, sometimes I can get as far as a blank space where the base calendar name should be and an error message stating that there is a problem
with the resource; other times the program just stops working and shuts down. Any ideas on how to restore the file?

I agree with John. Save the file as XML and reopen it. Also, if you have backup of the file, use Organizer to copy the base calendar from the backup. To use organizer, open both the files in Project.
1. In Project 2007 or earlier versions, select Tools > Organizer. In Project 2010 and later, select File, Info > Organizer.
2. Click Calendars tab.
3. Change the Calendars available in: drop down on the right to current file, and other drop down to backup. This will list all the base calendars in each file.
4. Select the base calendar in the backup. Click the "Copy >>" to restore the base calendar.
Sai PMP, PMI-SP, MCTS Project, MVP Project

When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?

When I try to set up Icloud control panel in Windows Vista, I get "your setup couldn't be started because the Icloud server stopped responding. I've tried loads of fixes suggested on the net but none worked. Can anyone help me please?

Hello, ksb2.
Thank you for visiting Apple Support Communities.
We are investigating this issue. This article will be updated as more information becomes available.
iCloud: iCloud Control Panel setup cannot be started
http://support.apple.com/kb/TS5178
Cheers,
Jason H.

LabWindows/CVI 2013 SP2 stops working when I try to open a file using the project file menu.

I have windows 7 on my system and sometime late last year I starrted getting a Windows dialog telling me that LabWindows/CVI has stopped working when I try to open a file from the project file menu. I also get an error when I run a project debug mode and use a selectFilePopup in the code. The error says, "The program has suspended execution at address 0x75D5025E. No source line information is available." I've tried removing and reinstalling CVI to no avail. Any suggestions?

Constantin,
Thank you for your response. I've attached screnshots showing the version details for kernal32.dll and ntdll.dll. I also looked at the updates to see which might have been installed when the problem started. Unfortunately there are 15-20 updates every month. I didn't take note of when the error started to occur. At first it only affected my ability to open files from within the project (i.e. file->open->Source, etc). Then I went back to modify a project that had a SelectFilePopup and found that that wouldn't work either.
Attachments:
ntdll.dll version.jpg ‏15 KB

Premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?

I can open a project, import files or other projects, but when I want to play the sequence the program stops working and closes. When I try to save the project or close the program I get a "software not responding" message.
I hope someone can help me with this as I cannot work on any projects.
thanks.

Hi john,
thanks for taking the time to help me. I have updated the software and rendered the files and now I am able to play them, but still neither the sequence nor the clip play/show on the corresponding screens, I can only hear the audio file. I also continue having problems when saving the project, the software stops working and I get the "non responding" error from microsoft.
As you suggested, and I have to say I am pretty much a dummy with the codecs and alike, I installed the mediainfo and run one of the files.
This is the info that appears on the screen
I am not getting any error messages from Premiere, so I am kind of stock. If you need other info let me know.
Thanks for your help and patience.
Arantza
Date: Mon, 23 Apr 2012 09:12:15 -0600
From: [email protected]
To: [email protected]
Subject: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
    Re: premiere pro 5.5 stops working when playing a sequence, saving a project or closing,any ideas why?
    created by John T Smith in Premiere Pro CS5, CS5.5, & CS6 - View the full discussion
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037What is a CODEC... a Primer http://forums.adobe.com/thread/546811What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037.Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing.For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/enFor Mac http://mediainspector.massanti.com/.http://blogs.adobe.com/premiereprotraining/2011/02/red -yellow-and-gree n-render-bars.html.If you have a red line over the timeline after importing a video and before adding any effects... your project is wrong for your video... read above about codecs.Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project.H.264 will NOT work inside an AVI http://forums.adobe.com/thread/854115.More information needed for someone to help... click these links and provided the requested information-http://forums.adobe.com/message/4200840-http://forums.adobe.com/thread/416679.For CS5 and later, the easy way to insure that your video and your project matchSee 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4354727#4354727
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4354727#4354727. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS5, CS5.5, & CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

RoboHelp 9 Stops Working when Opening Projects

Hi,
I'm having a massive problem with RoboHelp 9.0.2. It "stops working" whenever I try to open, convert, or create a new project. It fails 100% of the time - with the sample projects, our projects, and new projects. I'm running Windows 7 Ultimate SP1 64-bit on a Dell Lattitude E6400 with 2.66GHz processor and 4GB memory.
RoboHelp 8.0.2 ran fine on this system.
At first, I thought Win7 SP1 might be the culprit, as I was the only one in the dept. who had upgraded. But when the entire department upgraded to SP1 a week later, nobody suffered the same problem.
I've tried the ususal techniques such deleting the CPB file, moving projects to the "My RoboHelp projects" folder, etc. I tried to use RH9 in Windows Diagnostic Startup mode - same result.
The Visual Studio Just-in-Time Debugger gave this error, "An unhandled win32.exception occurred in RoboHTML.exe [6596]"
Does anyone have any suggestions? Or, what additional information can I provide?
Thanks,
Roger

Does RH always crash with the unhandled exception or does it just freeze and you have to kill it using task manager? I'm thinking if it only freezes, maybe your dialog boxes fell off the screen and you can use the following process to get them back.
1. Perform an action that will freeze RH, like File > Open or Insert > Image.
2. Press Alt, then spacebar, then M.
3. Press any arrow key.
4. Waggle the mouse. The missing dialog box should snap to the cursor.
5. Click to drop the dialog box where you want it.

PSE 10 stops working when trying to convert a project to wma

The project is about 400 pictures with music selected to it. About 40 minutes long. When it has converted about 148 000 kb it stops working "has to shut down"
I´ve tried a lot of solutions but nothing seems to work. Please help.

Thanks for your reply.
IE version 9.0.8112.16421; Adobe Reader version 10.1.3. Only in the last week IE stops responding when I try to open a .PDF file from the web – eg bus route map, catalogue etc. The messages sometimes say “error in preview handler” and sometimes “runtime error – abnormal program termination” – each time the program is terminated. The Reader opens any previous saved files OK, both downloaded from web or via email. Occasionally one from the web displays, with the error message over the top, but am unable to scroll the document or picture, enlarge it etc. I tried copying the PDF file to put on the desktop, but all that copied was the icon for the file.

Premier 13 stops working when existing project is loaded (after uninstalling Premier 9 where the project started)

Similar Messages

Maybe you are looking for