Premier CS 6 video out not clear

Premier CS 6 video out not clear and video have some color patch (grey ) not satisfied quality.
My System -
Premier CS 6
Mac 10.8 lion, quadcore 6GB ram
Blackmajic Decklinkcard
Please help how to broadcast quality out.
thanks....................................................

The links Harm provided influenced the original build, but on his advice, I re-read them and decided to alter it and bit.
If I swap out the ASUS Rampage for the Deluxe model, replace the Velciraptor with a Seagate 2TB, and the water cooling with a COOLER MASTER, Hyper 212 EVO CPU Cooler (rated Gold by hardwaresecrets), then I can upgrade to the larger COOLER MASTER, HAF 932 Advanced and keep the price about the same.
Given my projected video editing demands, it doesn't seem like the ASUS Rampage MB offers much more than the ASUS Deluxe MB and the latter contains BT and wireless.
Since I do not intend to OC, there doesn't seem to be a great need for liquid cooling, especially with the larger tower case. At any rate, it does feel better not put "liquid" and "computer" in the same sentence!
The Corsair AX850 Gold power supply does indeed seem to be a better choice.
There doesn't seem to a concensus in the all the discussions relating to using a SSD vs a hard drive for the boot disk. However, since boot speed is not an issue for me I don't need an SSD and the Velociraptor seems to a unnessary expense. While I don't need 2TB for the boot drive, they are not much more than the 1TB.
The only question remaining is filtering the air. This machine will be in a dusty (but not dirty) environment. I read Harm's thoughts on air filtering provide in his link, but don't want to go the custom route. These aftermarket filters look nice http://www.frozencpu.com/products/11729/ffi-57/DEMCiflex_Cooler_Master_HAF_932_Magnetic_Du st_Fan_Filter_Set_-_4_Piece.html, but for the cost, I'd rather put another $50-60 into the case and get one with good filtering.
Does anyone have experience with a stock Full Tower with complete built-in filters they have actually used in a dusty environment they would be willing to share?
Message was edited by: VideoShui

Similar Messages

  • IPod TV out not clear

    Hi everyone,
    I just got a third party iPod AV cable. When I hooked it up to the TV, there was a lot of noise in the picture and it wasn't very clear. When I wiggled the cable it cleared up. Just wondering if anyone else has experience this and any possible solutions. Also, is there a cable that uses the 9 pin connector and won't make a huge dent in my wallet? Any help is greatly appreciated!

    slipstream,
    There is 3 different video out cables.
    The original video out cable that works for the iPod Photo, iPod with Color Display, and iPod Video which have a video out port that doesn't support component out. It was not designed to work with the iPod Touch, iPod Classic or iPhone.
    There are 2 different cables available for the iPod Classic, iPod Touch, and the iPhone. The Apple Composite Cable which will also work with the older iPod models, and the iPod Component cable which will work with HDTV's (output is 480ip/576p or 480i/576i depending on iPod model or iPhone).
    The ones that will work with the iPhone should say "Works with iPhone" on them.
    This article has a chart of which ones are which:
    http://docs.info.apple.com/article.html?artnum=300233
    Hope this helps,
    Nathan C.

  • MacBook video out not working

    Hi there
    I bought the mini-dvi to s-video/composite output to connect my MacBook up to a TV while away from home (to watch TV and movies) but it doesn't work. First I suspected the old TV, but works OK with the Wii connected. Then I thought it was the cable, but I tried a new cable and the sound works fine, so that's not it. Then I suspected the adapter, but when I got home I connected it to my wife's MacBook and it worked fine.
    So, looks like I have dodgy graphics card hardware?
    The MacBook detects that the adapter is connected, so some of the pins are working OK. I just can't get a signal from my MacBook to the TV and the auto detect does not work.
    Anyone got any ideas? The computer is no longer under warranty and I don't have time to take it to the dealer (it takes them three weeks to turn around a fault!) so I'm guessing that I'll have to open up the device myself and check for some bad connections?
    Any advice is appreciated!
    Regards... Jonny.

    Video out under 10.5.2 works fine for me and for a colleague of mine with a more recent MacBook Pro. I'd wager it's a problem with your Leopard install, not a universal one.
    Also, FYI, Apple doesn't read these forums; they're just for user-to-user help. If you want to leave MacBook Pro feedback for Apple, do so here:
    http://www.apple.com/feedback/macbookpro.html
    But again, I do not believe yours is a universal issue. We'll be happy to help troubleshoot though. What do you mean the image is "unstable"? Could you take a digital photograph of the external monitor's screen and upload it somewhere?

  • Digital video out not working

    For some reason on my 2011 Mac Book Pro the digital video out does not work?  It works just fine using the minii adapter for analog video out, but not for digital?
    Any advice much appreciated!
    Thx
    Mark

    It is working exactly as it is supposed to. You didn't read the description properly before buying.
    Video mirroring is available on the iPhone 4S, not the iPhone 4.
    Video out needs to be supported by the app you are using.

  • Iphone for VGA Video Out not working

    We have the Iphone/iPad VGA to Monitor connector. We tested it with 3 different iPhone 4 phones... It worked on 2 of them, but the 3rd woudn't work. What possible reason would it not work? The 3 phones had software of 4.3 and higher...

    Dr. L,
    The previous iPod's did not support component video out for newer televisions that support it. The box for the older Video out cables do not say they support the iPhone.
    The current video out cables are available in either component or composite video out. They also say they support the iPhone on the box.
    In addition when shopping the Apple Store online for iPod or iPhone accessories there is a compatibility guide which shows icons of the iPod models or iPhone that are supported.
    Overall my personal experience is that this, and other Apple specific ones, are much smaller compatibility, and downtime driver for IT than many of them I have run across supporting a variety of computer and networking platforms over the last 23 years.
    Hope this helps,
    Nathan C.

  • Iphone Videos & Video Out not working

    Hi All,
    I have several TV programmes on my iphone, and yet when i plug the iphone into my TV using the apple composite AV cable, and tell the iphone to display on screen nothing happens, no sound or picture at all.
    I have just moved to Chicago from London so the video setting in the Iphone is PAL, could that be what is affecting it, should I change this setting ? The TV in the apartment is quite old fashioned and a brand name I don't recognise (Insignia CRT) so not sure whether it is the TV, but it has the right inputs.
    Any ideas much appreciated
    Thanks

    Dr. L,
    The previous iPod's did not support component video out for newer televisions that support it. The box for the older Video out cables do not say they support the iPhone.
    The current video out cables are available in either component or composite video out. They also say they support the iPhone on the box.
    In addition when shopping the Apple Store online for iPod or iPhone accessories there is a compatibility guide which shows icons of the iPod models or iPhone that are supported.
    Overall my personal experience is that this, and other Apple specific ones, are much smaller compatibility, and downtime driver for IT than many of them I have run across supporting a variety of computer and networking platforms over the last 23 years.
    Hope this helps,
    Nathan C.

  • Video Out not working on Ipod Classic 80gb

    I can't get video out to work on anything. I have a relatively new Onkyo home theater with an iPod dock that has video out cables, and I can't get a picture to show up on the TV. Also, my gym has StarTrac cardio equipment which has video connectivity through a built-in iPod dock. Video is supposed to show up on the TV monitor attached to the cardio machines, but all I get is "no signal".
    Since I can't get either of them to work, is something wrong with my iPod?
    Thanks!

    When you want to show the video on your TV, have you selected TV out in the video settings options?
    If that's not the problem, check this page, http://support.apple.com/kb/HT1454 to ensure you have the correct cable for your iPod, although you need to ensure you have identified your iPod model correctly. Check http://support.apple.com/kb/HT1353 if you're not sure because there is a crucial difference between the Classic and the 5th generation video models. (On the *iPod and iPhone: TV out support* page - http://support.apple.com/kb/HT1454 - look at the third table down, headed *Apple Component AV Cable with iPod Universal Dock or Apple Universal Dock* .) Notice that the Apple Universal Dock and Component cable combination works for an iPod Classic, but not for the 5th gen iPod. My point being; if the STarTrac device you mention has a built-in dock, perhaps it's designed for the iPod Classic, but if you have the 5th gen, it won't work.
    ... and no, I don't know why one dock is called the Apple Universal Dock, while the other is called iPod Universal Dock! Such a similar naming convention only leads to confusion. I know, I had to examine each box in my local store to find the iPod dock among all the Apple docks they had since they thought both docks were identical.

  • Video out not working properly

    i recently bought the Gigaware Composite A/V Cable for my 3rd Gen iPod touch at Radio Shack. It works beautifully with youtube and both iTunes videos as well as ones i uploaded myself. i get full video and sound with these. But when i try to play music there is no sound, when i try to view pictures they do not come up and when i try to use the netflix app there is no sound. I know my version of iPod is not yet compatible with video out for the netflix app, but others are saying they get sound, i get nothing. is there a setting that i need to correct or some other way to fix this? I also have a 1st generation iPod touch, and i have the same issue with this one as well. Please help.

    The video only works with specific application. I would not expect music to one of those since there is no video in music. I know on the iPad photos do not display on video out (slide shows do). The same may apply for the iPod. I can't answer about the NetFlix no sound.
    An Apple Support page says the following so there may be difference in different manufacture's cables.
    Note: If you choose to use a third-party cable, make sure it has the "Works with iPhone" or "Made for iPod" label. Learn more about iPod and iPhone accessories.

  • Video out, NOT.

    We just got a KDL 40w600b 40 inch and are disappointed to find that it has no way to get video out to another room so that the better half can watch from the kitchen and not miss or have to pause the content.Does Sony make anything that we can buy that will allow this? Do we have to go back to other steraming devicesand just let this "smart" TV  be a dumb monitor? 

    Hi JADUGGER,
    On your concern, you're using 2 TVs. One of them is Sony. How about the other one? Is it a Sony TV? If so, can you provide the complete model number so we can provide a work around if in case. 
    Thanks.
    >Joffrey
     

  • Axi 4 to video out not locking

    Hi,
    I am using the Axi 4 stream to video out and I am not able to get it to lock .I am using the IP in slave mode and  have connected the VTG_CE to gen_clken of VTC.
    I am running both the axi clock and video clock at 60  MHZ.
    There is not VDMA in my design .Its just streaming data from a camera and doing some data width conversion and feeding to to AXI4 to video out.
    I have attached the main part of my block design . I have also attached wave forms.
    Please help me on this . I am really stuck

    Hello,
    There are a few things that I'd constitute as a little 'strange' meaning not the usual use case.
    1) What exactly is the data width converter doing? Why are there so many tuser bits? Tvalid/tlast coming out of it look good, but what about tuser? It's not doing anything funny, is it?
    2) Your frame size (active) is really 120x768 pixels? Are you doing some sort of cropping? Can you put your camera in a more standard mode first to make sure everything else is correct?

  • Video out not working

    So, the audio is working fine, and the video is fine on my brother's iPod video, but the video on my iPod touch isn't working at all. What can I do to fix this?

    Hey Bender59,
    You'll need the Apple Composite AV Cable or the Apple Component AV Cable to do video out on your iPod touch.
    This article provides more information:
    http://docs.info.apple.com/article.html?artnum=300233
    Jason

  • Ipod Touch Video Out not working with IOS5?

    I normally could play video just fine from my Ipod to my TV and Exercise machine via the ipod plug in on the bottom...however since IOS5...video will play for  secs. on the TV then TV goes blank....sound works and the IPOD Touch displays the normal "Vidoe out" screen mode that normally shows when the video is being displayed on the TV.  any ideas?  any way to revert back to the previous OS?

    Downgrading the iOS is not supported by Apple.
    What cable are yu using and what is the source of the videos?
    Have yu tried another app that supports TV out?

  • S-video out not working

    I have a "cheap" dvd player that has a composite AV input. it works fine with digital cameras, etc. However, the s-video port on my powerbook does not seem to detect it. I have tried shutting down the computer, connecting it and then turning it back on, etc. but it just doesn't seem to connect with the player.
    i'm wondering if there's something wrong with the s-video on my computer or have i just missed something obvious.
    PowerBook G4   Mac OS X (10.3.9)  

    yes, i guess it doesn't say exactly for this model. i think from doing a bit of googling that it is under the keyboard on the very top right corner. make sure the computer is completely off, then ground yourself by touching some metal and letting go, and then press the button only once counting 1 mississippi.

  • Ipad Mini :Lightning /HDMI Video Out Not working

    I just tried a new Apple Ipad/IPhone AV HDMI/ Lightning adapter to try and play videos to my TV/Monitors thru their HDMI Port.
    The Ipad Mini recognized it was plugged in and notified me it was playing thru my TV.
    But I got no audio/video thru the TV and no indication it was getting a signal thru the adapter.
    What am I doing wrong?
    The HDMI input in my Flatscreen HD TV shows my Mac Mini screen perfectly and any videos I have thru it.
    Bad adapter, bad HDMI cable, operator error?
    What is the system NOT playing content?
    The $49.00 adapter should work flawlessly at this price point, imho.

    Took a trip to the Genius Bar and about 2 minutes to correct: The Dynex HDMI Cable from Best Buy didn't work. The Apple one works fine.
    Now I find my Movie Download from Comcast On Demand won't play thru the adapter. The Movie plays fine on the Mini, but I get a screen warning it's being blocked by Apples' Relationship with Starz. Funny, Comcast says it works fine. Another example of Apple forcing me to use the I-Tunes store on their products if I want to see it on their Hardware? If I pay for the rights thru Comcast, and they don't limit my Hardware, is it right for a Computer Maker too?  After the E-Books price fixing probe...are these kinds of issues next?

  • HT1454 iPhone 4s video out not working with AV cable

    I have an iPhone 4s with ios 6.0.  I recently bought the apple composite AV cable from an apply store.  Unfortunate when I connect it to my tv all I get is sound.  I've search for tv out settings but I can't seem to find them.  Any suggestions?

    im running ios 6.1.3 but have been having this problem for a while at least 2 earlier versions.I have an iphone 4s as do 2 of my work colleagues one running on the same as me and the other slightly earlier but not sure. I have a docking device that has an av out and also an iphone adater to composite av.and also vuzix wrap that supports iphone My phone doesnt work with any and i can recall starting to have problems first with the docking device which became temperamental and then wouldnt work at all.both my mates phones work with it and the glasses.My kids ipad 2s work with the composite lead and the glasses- dont fit the dock obviously ,my iphone 3 runs on all.i can only think that at some point the internals of my iphone 4s may have become damaged hence the intermittant problems with the dock at first ,and maybe its the 30 pin plug could it be that whichever of the pins carry the av signal have become damaged in some way posible dampness ,but im going to have it changed as it seems like a likey possibility.I can say one thing it was nothing to do with the software version ,nor any other device or lead.Also what i thought might be the internal 30 pin plug is i dont get a message l anymore saying the "accessory is not compatible with this iphone"therefore i dont think the phone knows theres a plug in so for the av out pins anyway as it charges up fine

Maybe you are looking for