PREMIER CS5 USE 100% CPU POWER WHEN  EXPORT

hi,
My computer data is as follows:
OS: WINDOWS 7 ULTIMATE 64 BIT
PREMIER VER :CS5 5.03
CPU: INTEL i7 950 3.07 ghz
MOTHERBOARD: ASUS P6X58D-E
RAM: G.SKILL 12 GB 1333 DDR 3
GPU: GIGABYTE GTX 470 1280MB DDDR5
BOOT HARD DRIVE: 60 GB SSD SATA 2
SECOND HARD DRIVE:  2X1TB WD BLACK USENIG MARVEL YPKON RAID 0
My question is
When I export a movie to FLV or AVI I notice that the CPU uses all 100% power
Must say it does not happen all the time
But often happens
Is that a problem should be normal?
If no what can be done
tanks

What type of projects are you exporting, and what are the settings?  How much "effect" and how many layers are you adding in?
I ran some tests over the weekend (including an update of PPBM5 for my machine) and noticed only about 50% of the CPU being used.  I was exporting HDV sequences with NEAT noise reduction to Blu-ray MPEG2s.
We have similar systems which is why this caught my attention.
Erik

Similar Messages

  • Multi-select LOV's hang form and use 100% CPU power

    Hello,
    We are using Designer 6i (6.5.52.1.0) and Headstart 6.5
    In one of our forms we are using 6 Multi-select LOV's.
    When we click the Cancel or Ok button (included through QMS_MSEL_LOV_BUTTONS), or hit Enter query in one of the ML_... blocks the form hangs and starts using all the CPU-power. I've tested this locally (c/s) and through the web (iAS), same result...
    I already rebuilt the LOV's but the problem isn't solved.
    We've got other forms with one or two multi-select LOV's, and these work fine.
    Has anyone experienced this behaviour before, and what is the cure?
    Thanks in advance!
    Wouter

    Wouter,
    If you are running against Solaris, you could be running into the following:
    Headstart applications that run via webforms on a Sun Solaris application server, suffer again from bug 1985903. This bug was spotted and solved a time ago and seemed to be solved at next
    releases of Forms 6i. Now, on Solaris the bug is introduced again.
    Description
    ===========
    1. When using a multi-select LOV (which is displayed in a modal dialog
    window), you select the records you want, press OK, and the application exits.
    2. When using a shuttle control to move records from left to right or vice
    versa, you select the records you want, press '>' to move them, and the
    application exits.
    This occurs in Forms 6.0.8.13.0 and 6.0.8.14.1. It did NOT occur in prior
    releases. This is some kind of forms bug.
    Workaround
    ==========
    For some reason the call to procedure renumber in qms$msel.process_records
    causes the application to exit. If you copy the code from renumber to all the
    places from which it is called, it works fine.
    - open qmslib65.pll in Form Builder
    - open package body qms$msel
    - find procedure process_records and define a local variable l_recno of type
    number.
    - find local procedure renumber and copy the body of this procedure
    (everything
    after 'begin' and before 'exception').
    - replace each call to 'renumber;' with the copied code.
    A new version of qms$msel package body is available on iXchange for download.
    See Headstart Oracle Designer 6i, Bugs and Fixes.
    Hope this helps,
    Marc Vahsen
    Headstart Team
    Oracle NL

  • Mail 6.0 in Mountain constantly uses 100% CPU power???

    Hi,
    I have upgraded to Mountain Lion and it would be perfect if there was one major issue fixed: when having Mail.app open, this application uses between 80 to 110% of the CPU power constantly. The main issue is reduction of speed of other operations but more concerning is that fan colling fan just runs endlessly.
    Has anyone experienced such issue? The activity Monitor shows that Mail uses all processing power.
    I use a macbook 13' (unibody) and Mail has an Exchange mail account active (and the iCloud email). After upgrading I recreated all mailboxes (by deleting the V2 folder), server setting is using SSL and no SASL.
    Could it be a bug or something in the server settings/account setting?
    Y.

    Finally solved.
    Had to delete the full Mail folder (+Maild Downloads) in the Library/Application Support, to recreate the full app support fmor the new version.
    Seems to work normally now.
    Thanks for the tip

  • Internet browsing uses 100% cpu

    Hello everybody.
    This situation has driven me crazy the last 4 months and till now i have not figure it out.
    Everytime i have a video streaming in my computer, CPU usage goes to 100%. It happens every time, either using internet explorer or Firefox or Google chrome. Even when i have a skype video call or a gtalk video call. Some description of each one:
    Using internet explorer: While i am watching a youtube video, CPU limits up to 100% after 1 minute or sometime 5 minutes. I am not able to watch a 15min video. Internet explorer process uses 100%CPU. When i kill it via task manager, another instance of IE
    appears with the same CPU usage. I also kill it and then 4 or 5 instances of rundll32.exe appear consuming 100CPU. If i kill them, explorer.exe uses 100% of cpu. If i do nothing and just wait, CPU is 100% for two hours. If i just kill only IE instances, taskmngr.exe
    is consuming 40-50% of CPU for 1-2 minutes, then other processes like conhost or csrss consumes the same amount of CPU and after 4-5 minutes everything comes back to normal. That's the story everytime i use IE 11.0.9600.16518
    Using Firefox: While video streaming, flash player process consumes all CPU. When i kill it, the same behaviour described above occurs.
    Using Google Chrome: When i run it, 5-6 instances of google chrome appear in task manager and after some time this browser also hungs with 100CPU.
    All above are also happening while i run Skype either i have a video call or just text messaging. Sometimes svchost is 25-30 % and system hungs.
    Operating system is Windows 7 home premium 64bit with SP1, my graphics card is NVidia Gforce GT 230M (latest drivers 20% when these situations occur, my system is extremely slow and whatever i do, it limits up CPU usage.
    Any assistance is acceptable.  Thanks for the patience.

    Hi,
    First, I would suggest that you reduce the hardware acceleration on the computer and check if it helps.
    a. Open Screen Resolution by clicking the Start button, clicking Control Panel, and then, under Appearance and Personalization, clicking Adjust screen resolution.
    b. Click Advanced Settings, click the Troubleshoot tab, and then click Change settings.
    c. Note that some video card drivers do not permit you to change settings.
    d. Move the Hardware acceleration slider toward None to reduce or turn off video hardware acceleration.
    This issue can be caused by confliction from one of the background programs or add-ons.
    You may use Process explorer as Milos mentioned to find the root cause to fix the issue:
    Process explorer:
    http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
    You can follow the references below to troubleshoot the issue:
    1. 3RD part app: Remove to check the issue
    2. Drivers: Update or install compatible version
    3. System process/service: Upload the log file for analyzing.
    I also would like to suggest you use Windows Performance Recorder to check the issue:
    Troubleshooting Windows Performance Issues Using the Windows Performance Recorder
    http://blogs.technet.com/b/askpfeplat/archive/2013/03/22/troubleshooting-windows-performance-issues-using-the-windows-performance-recorder.aspx
    To diagnose HDD and RAM,  I would like to suggest you contact your computer vender.
    Hope it helps.
    Regards,
    Blair Deng
    Blair Deng
    TechNet Community Support

  • Why is it that I'm lacking cpu power when I'm doing high tasking things but when i run a dinky little game it decides to use all the power possible?

    why is it that im lacking cpu power  when I'm doing high tasking things but when i run a dinky little game it decides to use all the power possible? its like when i need it its not there and then when i dont its there?

    Check here
    http://support.apple.com/kb/PH10900http://support.apple.com/kb/PH10900

  • Ff stalls out when opening new tabs, using 100% cpu on mac

    went to leave this in the feedback section but that doesnt work either, nothing gets sent. but anyways, new tabs always feeze or stall for over a min, using 100% cpu. running mac 10.6.8. never had problem on earlier versions of ff but ff5 is broken im sorry to say on macs. please advise or fix, more and more people are experiencing this same issue but nothing is being done to resolve.

    16gb aint enough lol> imac 27 , top of line, ssd hdd, 16gb ram, all updates, if memory was bad it would happen on other browsers or apps, only happens when you specifically open a new tab.

  • Server 2012 R2 100% cpu usage when using search

    Hi all!
    We are experiencing issues with the built in search in WS 2012R2 (Win+Q). Upon starting to type, the explorer.exe process peaks and stays at 100% until typing is done and the search is complete. It also can't keep up with typing and hangs after
    a few keystrokes. We have done tests on 2012 R2, 2012 and 2008 R2 running as VMs with 1 cpu. The tests performed have been run on a host running only the test VM with underlying 2x8 core cpus, SSD, SAN storage and 256GB RAM. Also, we have tested
    both Hyper-V and VMware ESXi 5.0. We see that if we add another CPU to the guest it alleviates the keystroke lagging, but the explorer.exe still consumes 100% cpu.
    When the same tests are run on a physical machine (approx. same specs as the virtualization hosts) the cpu usage reaches 15-20% on one of the physical sockets (numa node). Totally negligible, but still a high number.
    We are afraid of service impact and are keen to know if anyone else is experiencing the same? Maybe someone has a fix?

    Hi TrondWH,
    Thanks for contacting Microsoft.
    Currently, would you please try cleaning boot the server and test how the issue goes. Cleaning boot can exclude some third-party application affect. Following are the detailed steps about clean boot:
    Log on to the computer by using an account that has administrator rights.
    Click Start, type msconfig.exe in the Start Search box, and then press ENTER to start the
         System Configuration Utility.
    On the General tab, click Selective Startup, and then click to clear the Load startup items check box. (The Use Original Boot.ini check box is unavailable.)
    On the Services tab, click to select the Hide all Microsoft services check box, and then click Disable all.
    Click OK, Choose Don’t show this message again and then click Restart.
    Please check if the issue is still the same.
    Please let me know the result.
    Best regards,
    Sophia Sun
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Elements 10 Playback uses 100% CPU 0% GPU

    When I play back a video clip in the Elements 10 environment the video is choppy and my system is using 100% CPU and 0% GPU.  When I play back the same files in Sony PMB the CPU runs at about 15% and the GPU runs at about 50%.
    Is there a way to get Elements 10 to use the GPU?
    System Specs:
    Windows Vista SP2
    AMD Athlon 64 X2 Dual Core 5600+ 2.8GHz
    3 GB RAM
    ATI Radeon HD 2600 XT
    Video Files are 1080i 5.1 m2ts.
    I am using the trail software now and will buy if I can get it working.
    Thanks!

    Certainly when rendering PRE uses as much of the processor capacity as possible (somewhere in these forums I posted a screen shot showing all my four cores at 100%).
    But in normal use I don't notice it hogging all processor power. I wonder if you have selected the right project setting for your video.
    What Sony camera are you using?
    What format did you record the video in?
    How did you get the clips onto your PC?
    What project setting did you use when you created your project?
    Do you see red lines across the top of the timeline when you first add your video to the timeline?
    As you edit your clips the timeline will show red lines - to perform a render press [Enter] and wait for the lines to go green.
    Are you using still images in the project? What pixel dimensions are they?
    You might find these articles helpful:
    PrE Hanging, or Crashing - Some Tips
    PrE Hanging, or Crashing - Some TipsClean, Lean & Mean Editing Machine - One Workflow
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • ITunes will uses 100% cpu and will not close in OSX Lion

    When I start up iTunes, after a few minutes, the fan kicks on and Activity Monitor shows that it is using 100% CPU. The fan kicks up and the MBP gets warm. I have to force close to get it to shut down. iTunes match is constantly running, so maybe that has something to do with it?
    I'm not running it in Mini Player mode or anything like that, so I'm not sure what's causing the problem. Any thoughts on how to diagnose it?

    I also have this problem which has been getting worse with recent successive updates of Firefox. As a long-time user and advocate, I am about ready to look for an alternative browser. Firefox will not close and exit properly, requiring direct cancellation through Task Manager; starts up very slowly (often 1 to 2 minutes); and frequently locks up the CPU with 100% of cycles while doing NOTHING; offers to restart crashed sessions, but cannot recover and reload those sessions; will not operate correctly while any other application accesses the internet, like uTorrent. Firefox is set to delete cookies, etc. whenever the session closes, sqlite database is vacuumed regularly, CCleaner regularly wipes remaining accretions, and disk is defragged. Currently running 3.5.5 but will NOT upgrade until this problem is solved since later builds report the same problems. I know several other users who have experienced the same problem and I can no longer automatically recommend Firefox to users and clients. Is anybody paying any attention to this problem? What is being done to address this fault? Why is there no response to the original poster? Is this really a support forum or just a way to preoccupy and distract the users who suffer this malfunction? Wireless 54Mbps connection. No Adobe Flash, QuickTime, MS Silverlight, etc. installed on this machine. Firefox 3.5.5 with the following add-ons:
    Aardvark 3.0
    Adblock Plus 1.2.1
    Adblock Plus: Element Hiding Helper 1.0.6
    Free Download Manager plugin 1.3.4
    Highlighter 0.1.4
    MR Tech Toolkit 6.0.4
    repagination 2006.4.5.1
    Save Complete 1.0.1
    Session Manager 0.6.8.3
    Tab Mix Plus 0.3.8.4
    Unhide Passwords 1.2.5.1
    User Agent Switcher 0.7.2
    Thanks for any help or suggestions.

  • Oracle uses 100% CPU

    Hi,
    I have installed Oracle 10g R2 on 64bit linux. It was working fine, until last week. I got alert that oracle uses 100% CPU.
    Some lines from alert:
    4894 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 56.3 12978 7720 22860 oracle
    9244 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 50.4 10357 7720 22860 oracle
    11798 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 41.1 4429 7720 22860 oracle
    11740 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 28.3 45350 7724 22864 oracle
    1516 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 24.2 29968 7728 22868 oracle
    17006 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 21.8 21913 7724 22864 oracle
    19449 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 21.5 20865 7720 22860 oracle
    24877 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 21.0 18708 7728 22868 oracle
    26566 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 18.4 5727 7724 22864 oracle
    1788 /opt/oracle/product/10.2.0/db/perl/bin/perl /opt/oracle/product/10.2.0/db/sysman/admin/scripts/db/dbresp.pl 17.1 3319 7724 22864 oracle
    When I log in to EM, I can see section
    Host CPU
    It is 100%.
    I have only instance named "parama". and it uses 1% CPU ant the picture shows that 99% CPU is used By Other.
    What is Other? Why does it use that much CPU?
    I had another oracle instance few months ago, but I is not used now (it is not even started).
    How do I restore normal system performance?
    Can I kill these processes?

    Hello,
    I have a similar problem. I see 2 perl processes related to Oracle that are taking up 99% of 2 cpus. These 2 perl processes have been running for days and keeping the load average high (above 2) on a mostly idle system.
    The 2 perl processes are running:
    /oracle/app/product/10.2.0/db_1/perl/bin/perl /oracle/app/product/10.2.0/db_1/sysman/admin/scripts/db/dbarchfull.pl
    and
    /oracle/app/product/10.2.0/db_1/perl/bin/perl /oracle/app/product/10.2.0/db_1/sysman/admin/scripts/db/dbresp.pl
    Has anyone seen this problem? Can I kill the perl processes?
    --Dan                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Make Spotlight (& the OS) use more CPU power?

    I've noticed that a lot of the time that the OS, specifically when using Spotlight doesn't use all of it's power.
    For example I have iStat menus displaying the CPU usage. When I do Spotlight searches I'll start typing but before I can finish typing my search Spotlight will start grinding away, not letting me finish what I want to type. But looking at the CPU usage in the menu bar both cores are only at around 50%. I'll have to wait for Spotlight to calm down before I can finish typing my search.
    I looked around in System Preferences > Energy Saver > Options & set Processor Performance to highest but it seems a lot of the time the OS doesn't use as much CPU power as it could.
    Is there any way to make the OS, specifically when using Spotlight use more CPU power?

    Spotlight will use as much CPU as it needs - It really doesn't take that much unless it's drawing image previews, etc.... The other-and probably more important- issue is hard disk speed and whether or not the disk is doing anything else when you initiate the search.

  • Airport using 100% cpu on 20" Core 2 Duo iMac.

    My 10.4.8 C2Duo 20"iMac has this strange problem with the airport. I have it connected to a linksys router.
    Every now and again, especially after waking up from a sleep I notice that the iMac is running a little slowly. When I then go into activity viewer to analyse the problem. I can see that the "airport" process is using 100% cpu, i.e. one of the cores. It seems to be in a loop of some sort.
    When i force quit it, the iMac speed returns to normal and wireless connectivity is not dropped or affected in any way
    Anyone seen this? Any ideas? Its strange, and irritating.

    Start with this:
    Open System Preferences, select the Network pane and select AirPort in the "Show:" popup menu.
    Set the "By default, join:" popup menu to "Preferred networks."
    Delete the listed preferred networks using the "-" button but this time we did not add it back again with the "+" button as Apple recommends.
    Set the "By default, join:" popup menu to "Automatic."
    Restart.
    Manually rejoin the AirPort network using the AirPort menu icon, i.e. selecting the network (or selecting "Other" and typing in the network name if hidden) and typing in the WPA (or WEP) password.
    If you are using the Checkpoint Secure Client software, then you need to uninstall it.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • [x86_64] nvidia 180.29: kde4 plasma and others use 100% cpu

    i have a problem with the latest beta drivers from nvidia (185 series):
    plasma uses 100% cpu, when i kill it, krunner uses 100% ..  deleted plasma configs and kdm configs but that didnt change a thing..i also switched from kdemod to kde from extra, same problem..
    nay idea what else i can try?
    do you guys have success with this (propably outstanding) driver and kde4 ?
    Last edited by aantipop (2009-04-09 15:13:28)

    i was using xorg-server 1.5.3..
    after upgrading to 1.6 i can use 180.44.
    but still 185.19 + xorg 1.6 does not work here , but the errors were not kde related this time:
    dlopen: /usr/lib/xorg/modules/drivers//nvidia_drv.so: invalid ELF header
    (EE) Failed to load /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (EE) Failed to load module "nvidia" (loader failed, 7)
    (EE) No drivers available.
    Fatal server error:
    no screens found

  • I upgraded to iTunes 10.5 on XP and now it and applemobiledeviceservice.exe use 100% CPU. How do I fix this?

    I upgraded to iTunes 10.5 on XP and now it and applemobiledeviceservice.exe use 100% CPU. How do I fix this?

    When I called Apple Support to ask about the 100%  CPU usage, they wanted to charge me because my Ipod was out of warranty.  I insisted on talking to someone and finally got to talk to a software engineer for free.  He said that he had never heard of the problem in his three years at Apple.  Nonetheless, he sounded really interested and suggested that it might be a conflict with anti-virus software.   I deleted the antiviruse and that DID NOT HELP AT ALL.
    It seems as if Apple could care less.    There is no official response.   Their primary response is to look at the Forum.   At least you find out that the problem isn't your fault, it really is Apple!!!!
    So far the best solution is just to delete iTunes and use Mediamonkey to sync your pod.
    Apple, please fix this!!!!!

  • My TreeCellEditor takes 100% CPU-power

    Hi,
    I have a custom TreeCellEditor on a JTree which displays a JComponent with (a JCheckBox and a JLabel). When I click once on a label ( on a checkbox, everything is normal ), the nodes is selected and the TreeCellEditor is invoked. But when I open the Windows Task Manager, I see that the thread is using 100% processer power. This stops as soon as I click on a JCheckBox or when I expand or collapse another node in the tree.
    I've put tracing code in all my methods, but none of them seem to cause an infinite loop... Any ideas...?
    Thanx!

    I really don't have the time to search the relevant peaces of code, but maybe you can help me find the problem myself. When I override the paint() method in my component and I dump the stack before calling the super.paint(), I can see that the repaintmanager considers the component as a 'dirty region' and repaints it, over and over and over...
    Do you, or anybody else, know when the repaintmanager considers a component as 'dirty' ?

Maybe you are looking for