Premier Elements 11 screen refresh when window not full screen

Hi,
Have following spec pc:
Pentium 4 3.6Ghz 2Gb Ram with NVidia GTS450 latest display drivers and windows XP service pack 3.
When running Premier elements in not full screen mode moving the window leaves window trails behind and screen does not refresh. In full screen things are ok?.
What can be causing this and is there anything that can be done to resolve this apart from upgrading my pc etc.
Thanks.

Welcome to the forum.
I have the same, or very similar GUI display issues with PrE 11 on an older laptop, running XP-Pro SP3 and an nVidia GeForce 8800M GTX w/ 512MB VRAM. Unfortunately, for that chip and on XP-Pro, the latest video driver is from back in 2011 (IIRC), and no new one in sight.
I feel that the only solution will be to update the OS to Win7 (allowing a newer video driver from nVidia), or replacement of the laptop (which I am doing).
PrE 4.0, PrPro CS 2, AE CS 2, and other, older Adobe programs, all work perfectly, but PrE 11 has display issues. To me, this means that the newer version's GUI interfaces more closely with the video driver, than the other programs.
Even for a company, like nVidia, the XP OS route is now a deadend.
Sorry for the bad news, but know that you are not alone.
Good luck,
Hunt

Similar Messages

Flex GUIs get a bad performance in normal screen mode when switched from full screen mode

Hi, there :
I encountered an odd situation and it is only happens on IE. Our project is a Flash 3D Game using Stage3D, and the Game's GUIs are created by CS6. When our game switch from the full screen( StageDisplayState.FULL_SCREEN_INTERACTIVE or StageDisplayState.FULL_SCREEN ) to normal screen ( StageDisplayState.NORMAL ), the performance of the Game GUIs decline to approximate a half FPS of full screen mode. But this condition is only happens on IE.
The Game is normal screen when it is initialized and the performance is as same as fullscreen. The performance degradation only happens after switching to normal screen mode from full screen mode.
p.s. : When the mouse is out of the view, the performance become better, from 20 fps up to 50 fps. But is still not as same as the original 60 fps.
p.s. 2 : My colleague told me the Flash Pro CS6 be used to built a single swc file per GUI, and then package all ui swc files to one swc file by Flex Framework SDK( the command is "compc" ). and the IE version = 9.0.8112.16421, the Flash Player Version = 11.6.602.155.
p.s. 3 : I have utilized Adobe Profiler Scout to observe the application, and I found that when it switches to normal screen mode from full screen mode, the time 「Waiting for GPU」 in 「Inactive」 grows up from 10ms to approximate 30ms which is triple. And in the 「Activity Sequence 」tab, it shows that the 「Waiting for GPU」 happens in the 「Copying to screen 」in 「DisplayObject List」.
Thanks

This does sound like a specific bug with IE. It would be great if you could file a bug report here (https://bugbase.adobe.com/), so we can get somebody to look into it.
btw, Flex is really not a good framework for games - it's really slow and heavyweight. If you're just wanting some lightweight UI elements, you might want to check out the Feathers framework, which is built on top of Starling: http://feathersui.com/

What is the keyboard shortcut to 'maximize' a window (not full screen, just maximized)?

I want to be able to use a keyboard shortcut to maximize a window completely instead of holding 'shift' while clicking the green plus circle on a window.

r0cker2 wrote:
Thanks for the quick reply
I am trying to close floating windows (effects and instruments) using ALT-W not CMD-W.
Ah, okay, never used that one. Have you checked your *Key Commands* that this shortcut actually still is assigned? Even if it is, it might just help to reassign it (to the same keycombo).
(much later:)
Mm, I did a search of Logic key commands, but I cannot find any command that closes floating windows, alt-W is not a default shortcut for anything... to what command exactly did you assign alt-W?

How to open a window in full screen mode using lf_fpm_navigation?

Hi Guys
For the following applications
ESS Application: HAP_START_PAGE_POWL_UI_ESS
MSS Application: HAP_START_PAGE_POWL_UI_MSS
When the user clicks on the appraisal document name, a seperate window(not full screen) is generated to display the Appraisal docuemnt.
The code is as follows:
COMP: HAP_START_PAGE_POWL_UI
Object : COMPONENTCONTROLLER
Method: FOLLOWUP_POWL
Generate the URL to be called.
    CALL METHOD cl_wd_utilities=>construct_wd_url
      EXPORTING
        application_name = 'HAP_MAIN_DOCUMENT'
        in_parameters    = lt_parameters
      IMPORTING
        out_local_url    = l_url.
    wd_this->url = l_url.
    wd_this->display_document( ).
In Method: DISPLAY_DOCUMENT
lv_alias = 'EMPLOYEE_DOCUMENT_UI_OBN'.
use FPM navigation
    ls_nav_key-key1 = 'HAP'.
    ls_nav_key-key2 = 'HAP_GENERIC_UI'.
    lr_fpm_navigation ?= lr_fpm->get_navigation( is_key = ls_nav_key iv_instance_sharing = abap_false ).
    CALL METHOD lr_fpm_navigation->get_key_from_alias
      EXPORTING
        iv_alias = lv_alias
      RECEIVING
        rv_key   = lv_key.
    lr_fpm_navigation->modify_parameters(
         EXPORTING
           id_target_key            = lv_key
           it_application_parameter = lt_appl_param
           it_business_parameter    = lt_business_param    ).
    lr_fpm_navigation->navigate( lv_key ).
Any idea how to open this window in full screen?
Highly appreciate your help.
Thank and Regards
Pramod

Hi Pramod,
This FPM navigation is achieved using settings made in Launchapd Customizing ( LPD_CUST ).
a) Execute Tran LPD_CUST
b) Go to Role HAP - Double Click to open it.
c) Open the second folder on the LHS menu - there you will find 2 entries
d) Click on second entry - in the entry setting you can see that it is configured for WD Application - HAP_MAIN_DOCUMENT
e) Click on button Show Advanced Parameters
f) There you will find a input box named as Window Features - here you can specify window features like
height=700,width=1100,position=center,menu=no,status=no,location=no,menubar=no,status=no,toolbar=no
save the settings come out and test ur app again.
change the height and width and other features as per ur req.
Regards
Manas Dua

Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
Any way to fix it?

only $99, i thought it was closer to $175.

Elements 11 organizer shows correct wb in thumbnails but when increased to full screen or in slide show changes white balance to tungsten

Elements 11 organizer shows correct white balance in thumbnails but when increased to full screen or in slide show changes white balance to tungsten. Photos where shot in raw and in auto or flash white balance. any suggestions out there?

Figured it out, if the raw default setting has the wb on 3000 (or tungsten) the slide show uses adobe raw to convert so they all showed blue LOL

Fixed window when replying in full screen mode is limiting - any fix?

If I have mail in full screen mode then click reply to an email, the message scrolls up from the bottom of my screen, ready for me to type. The problem is that it's then the only active window and sometimes I want to click on one of the windows in the background to copy some text that I wish to paste into my reply. Is there a way to prevent this? Graphically it looks beuatiful, but practically it's very limiting and only happens whenin full screen mode.

Unfortunately, that is a problem that exists in OS X when working Full Screen mode. I find full screen mode to be problematic at best and don't use it for that reason. I just enlarge the individual windows that I'm working with manually by clicking and dragging the lower left corner of the window.
Hope this helps

I am trying to make a time lapse video with Premier Element 13. When trying to publish it at about 15% of work done it stops and in a new screen it says an unknown error, what am I doing wrong?

I am trying to make a time lapse video with Premier Element 13. When trying to publish it at about 15% of work done it stops and in a new screen it says an unknown error, what am I doing wrong?

Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

Adobe Camera Raw window-Only full screen?

I use Elements 7.0. In an attempt to improve my photography, I’ve been concentrating on getting as close to a proper exposure in camera using zone system etc. To further get close to the appropriate exposure after the shot is taken, I’ve begun to shoot in raw. I’ve bought a couple of books, videos etc. and I’m getting the basics down fairly well.
I have one basic question. I’ve searched help both in Elements and within this forum and I can’t find anything that addresses my question.
When I select a nef image (Nikon D90) in the Organizer and go to “Edit” and then “Full Edit”, the Adobe Camera Raw box opens up in full screen with the selected image displayed. No part of the desktop is displayed, including the taskbar.
Is there a way to open up ACR that is not full screen? I’m so new that I still need to refer to help to figure out what certain sliders do. I have a 25.5 diagonal monitor, so I have the screen real estate to have a fairly large ACR window while at the same time displaying a help screen.
Thank you for your input.

Not sure if this will help, but on my ACR to the right of the Preview checkbox there is a window-double-arrow symbol that toggles full-screen mode in ACR so even if ACR started up in full-screen you could unmaximize it and then resize it somewhat smaller. I don't know how to start it up non-maximized in the scenario you describe because I don't use that scenario and my ACR starts up in whatever mode I last closed it, full-screen or not.

Can't open visualizer in itunes window. It goes to full screen and "show visualizer in full screen" won't stay unchecked. I'm running SL and everything is up to date.

I would really like to be able to view the visualizer in the itunes window. when I uncheck full screen in preferences it does not take. I'ts automatically checked when I open preferences.

I would really like to be able to view the visualizer in the itunes window. when I uncheck full screen in preferences it does not take. I'ts automatically checked when I open preferences.

Lenovo 24 inch touch screen not full screen with 1920x1080 selected (L2461xwA)

I have the L2461xwA Lenovo Widescreen Touchscreen display. When I set the resolution to 1680x1050, it is full screen as expected. When I set the resolution to 1920x1080, which is the native resolution, it is NOT full screen. There is about a 1 inch black border on the left and right sides and about a 3/4 inch border on the top and bottom when in 1920x1080 resolution. How do I make it full screen?
(I'm running Windows 7 64-bit and have installed all of the drivers. The touch functionality and camera are working great)
Thanks
Solved!
Go to Solution.

Nevermind. I resolved it. When I switched DVI ports on my video card, it worked.

Is it possible to set a finder window to full screen mode,..

... like mail, itunes and other apps? and if not, why not?
I have to say it took me a bit to get used to Lion, I began complaining all day until I decided to take some time to learn it, and now I like it very much, I see the advantages over 10.6.
But still, there are some things I don't know about, and the window of opportunity to take time to learn more has closed. And I don't know when it'll open again.
So, that's why I have joined the community, because now I'm trying to use everthing on full-screen mode, and as I was setting my desktops to work on a project in which I will be needing a lot of finder windows open with a lot of items each, I instantly asked myself:
Is it possible to set the finder windows to full screen? because I don't see any buttons.
Thanks 4 Your Time
R.D.B.

Thanks Don Archibald,
Yeah, that's what I'm doing at the moment. But I thought it would be nice to have the little full screen button just to press it so.
Besides, I'm still figuring out the finder windows' behaviour. I discovered that if you open a folder from a window that has the toolbar, the new folder would also open with a toolbar, even if you already had it set it up with just the status bar.
And one thing that still enervates me is that if you have a window with two items, and you press the green button to fit the borders up tight, instead of leavin' the 2 items in a horizontal arrangement, it moves one to the bottom and puts a slider. Arrgh.
Another thing I haven't understood is why one folder I have on the dock sometimes opens with a column layout instead of the icon layout I have arranged for it before. Totally random 4 now, can't find the why.
Anyway... I'm going to order some lapel pins about 2 flags I designed for two embassies. Anyone know a good place for doing that?

Premier Elements 11 installed but does not launch

I installed premier elements 11, the installation did not have any problems, but when I click on the icon nothing happens. It does not give an error message, is does not try to do anything, it simply does not launch. I uninstall, turn off the norton software, did a clean boot to prevent other services to load, re-installed the software and the problem continues.
I have window 7 64 bits 8 gb memory, more than enough disk space. What else can be wrong that is preventing the application from launching?

Hi,
Could you please try the following solutions and see if any of these work:
1. Navigate to 'PhotoshopElementsEditor.exe' located inside:
    Win x64: C:\Program Files (x86)\Adobe\Photoshop Elements 13
    Win x32: C:\Program Files\Adobe\Photoshop Elements 13
     Right click on 'PhotoshopElementsEditor.exe' and select 'Run as Admin'
2. Just after this keep on pressing 'Ctrl+Alt+Shift' on Windows (or Command+Option+Shift on Mac). You will get a popup asking to delete Elements settings file. Click Yes.
If the above does not work, please try the following:
3. Please rename SLCache folder present at location "<root drive:>\Program Files (x86)\Common Files\Adobe\SLCache"
Also please rename opm.db on your machine to resolve this issue @ <root drive>\Users\<user name>\AppData\Local\Adobe\OOBE
Now re-launch the application.
4. In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
5. Try launching with anti-virus off or removing PSE from conflicting list.
If none of these work, please let me know.
Regards,
vaishali

Today, when using the full screen mode, when I switch out of it, its automatically returning to full screen mode one second later. And ideas?

Lightroom is acting up today. If I enter the fullscreen mode to view images, when I try to exit out of it back to the library or develop mode, after one second its returning back to the full screen mode. The only way to exit is to command Q. Any ideas?

Found this on another thread. Havent tried it yet, but am about to.
4. Re: lightroom 5.4 gets stuck in full screen preview?
mohammedabidally Jun 1, 2014 10:53 PM (in response to freophotos)
Hi ye I followed the procedure given here https://forums.adobe.com/inbox?objectType=2&objectID=6355272 and it worked for me.
You need to do it with the cursor.....
"restarted Lightroom then using the menu with cursor only (NOT THE F KEY) I went to window …. Screen mode….. and tried the various modes.. Screen Mode with Menu…..Full Screen…. then the Full Screen Preview (this is was my issue) Once in Full Screen Preview I got out of it using the escape key which worked…. Then I hit the F-Key which again took it into Full Screen Preview then I tried the F-key to get out and it worked!!….. "

How to avoid pop up appearing in the screen middle top when playing video full-screen ?

I created a landing page with embedded video hosted on Vimeo. When I click to play the video full-screen there's always a pop up window in the middle top saying the meaning like Vimeo is playing full-screen, press escape to get out of it. I don't want that pop up from appearing, I am wondering if any code I can put on the embedded video to prevent the pop up ? Thank you very much.

No, as a web developer, you can't tamper with that message. The point is to prevent a situation where the user is trapped in full screen, as would happen if full screen is initiated by the page and the page doesn't provide controls to exit full screen.
If users trust the site in question, they can check the "Never ask me again for this domain" checkbox to avoid the message in the future.
Users can also get rid of all such messages altogether:
# Install Stylish and restart Firefox when prompted.
#* https://addons.mozilla.org/firefox/addon/stylish/
# Click the Stylish icon on the navigation toolbar and choose Write New Style, then Blank style.
# Paste the following in the text box, give the style a name, then click the Save button.
<pre><nowiki>
@namespace url(http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul);
#fullscr-toggler,
#full-screen-warning-container {
display: none !important
</nowiki></pre>
If you don't want to install an add-on, you can use the ''userChrome.css'' file instead, but I don't recommend it. In that file, the first line of the style should only appear once at the top.
* http://kb.mozillazine.org/UserChrome.css

Premier Elements 11 screen refresh when window not full screen

Similar Messages

Maybe you are looking for