Premier Elements 3 renders but then stops

This has happened before but at present I am working on a 3 hour video. It will go through all the steps (taking 3-4 hours as expected) but then just stops with the overall progress bar at about 45% and the current progress bar at about 5%. There is no error message and the DVD is not affected. I have put similar projects onto the same 8.5Gb discs before. When this has happened before, I have used other software to put a copy onto my HDD and then tried again. Sometimes this works!! Any help would be greatly appreciated.

Depending on what you're using for source files, Premiere Elements could require as much as 150 gigabytes of free, clean, defragmented space on your hard drive to create a 3 hour DVD, Geoff.
The fact that this seems to work for you intermittently might well indicate that the problem is too many "invisible" temp files taking up space, too much junk in your media cache and too much fragmentation -- in addition to the possibility that you simply don't have enough hard drive space to do it. (Remember, if you're editing video on your C drive, the operating system is constantly paging to and fragmenting the drive as you work.)
You can try our recommended maintenance. (You'll likely find several gigabytes of junk files you didn't know were there taking up space on your drive.)
http://www.adobeforums.com/webx/.3bc43f9a
But things could also depend a lot on what you're using for your source files. Video captured over FireWire from a miniDV camcorder works most efficiently. Non-DV-AVI footage, such as video from a DVD or hard drive camcorder, needs a lot more rendering space. And photos, if they aren't sized to 1000x750 pixels, can slow or choke the program's processing completly.

Similar Messages

  • Installed new Premier Elements 12 and dymamiclinkmanager has stopped working

    The Sw does not start at all I get several error messages:
    Installed new Premier Elements 12 and dymamiclinkmanager has stopped working
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    dynamiclinkmanager.exe
      Application Version:    6.0.0.0
      Application Timestamp:    523cc6d3
      Fault Module Name:    MSVCR100.dll
      Fault Module Version:    10.0.40219.1
      Fault Module Timestamp:    4d5f0c22
      Exception Code:    40000015
      Exception Offset:    0008d6fd
      OS Version:    6.3.9600.2.0.0.256.48
      Locale ID:    1035
    and after those a Message:
    Adobe Premier Elements 12 has stopped working
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    Adobe Premiere Elements.exe
      Application Version:    12.0.0.0
      Application Timestamp:    523cd4d5
      Fault Module Name:    dvamarshal.dll
      Fault Module Version:    11.0.0.0
      Fault Module Timestamp:    523cc62d
      Exception Code:    c0000005
      Exception Offset:    0000000000034961
      OS Version:    6.3.9600.2.0.0.256.48
      Locale ID:    1035
    So did I purchase piece of crap, or what should I do to get the SW working?
    Br
    -H

    First, note that this is a user-to-user forum. If you want to contact Adobe, you'll need to call or write them on their main site.
    That said, as the note says at the top of the forum, you're going to have to provide us a lot more information if you want us to help you. "Stopped working" doesn't tell us much. Does this mean that it was working in the past but then stopped? What stopped? What did it do that it's not doing now? What were you doing when it stopped? Was it when you were adding video to your project, for instance?
    What operating system are you using? If Windows, have you manually gone to Windows Update and made sure you've got the non-critical updates, which don't download automatically to your system? Have you ensured you have the latest version of Quicktime, per the program's requirements?
    How fast is your processor, how much RAM do you have and how much free, clean, defragmented space is on your hard drive?
    What model of camcorder is your video coming from and what format and resolution is it? Did you use Premiere Elements to get the video from your camcorder to your Premiere Elements project?

  • Adobe premier elements 11 downloaded but will not install

    adobe premier elements 11 downloaded but will not install?

    Hunt
    What you just wrote may have revealed the Photoshop Elements Premiere Elements integration consideration. If you have Premiere Elements 11, you need Photoshop Elements 11 for the integration between the programs to produce the DVD version of the Photoshop Elements Slideshow.
    All along I was picturing Meyerswalter already in Premiere Elements 11/Publish+Share/Disc/DVD and being told to install Premiere Elements to get the burn to disc accomplished.
    But, if Meyerswalter is using Premiere Elements 11 and a non integrated version of Photoshop Elements for this matter, that could very well fit.
    So, Meyeswalter, so that we can dispel those thoughts
    a. What versions of Photoshop Elements are you using with Premiere Elements 11? And, are you in the Photoshop Elements Slideslide Show Editor using the Output of Burn to Disc DVD or Edit with Premiere Elements Editor and getting the load software message somewhere along the line?
    b. To prove this point, if you have not already, what happens if you take Photoshop Elements out of the equation. Import some media into Premiere Elements 11 and try to burn to disc from there Publish+Share/Disc/DVD?
    If that is the core of the issue, I will post a list of Photoshop Elements Premiere Elements integrated combos as a guideline for you.
    If this is the core of the issue, you could always keep the non Photoshop Elements 11 version that you have, output the slideshow to a wmv file sized for DVD and then import that into Premiere Elements 11 via its Add Media. More on that later if necessary since right now I am speculating on an explanation for what you are encountering.
    Thanks.
    ATR

  • Red rendering line in timeline turns green after rendering but then reappears.

    I''m a new user of Premiere Elements 10 and relatively new to video editing.  My system info is: 2010 Mac Pro quadcore 2.66 Ghz with 12 Gigs of memory, NVIDIA GeForce GT120 512Mb running Lion 10.7.3.  The red rendering line in my project turns green, as expected, after rendering but then reappears red after I close the project and reopen it.  The project is saved regularly after rendering and everything works normally.  No changes are made to any clips and as I stated the render line is green when the project is saved and closed.  Any ideas what I might be doing wrong.  Thanks in advance. 

    Thank you for that information. It kills about all of my theories.
    Something is keeping PrE from seeing the links that it created to the Render Files, so PrE cannot find them - the link is dead.
    I know so very little about Mac's, that I cannot even imagine where to begin. Maybe a Mac-user will drop by, and have an idea, and then we both will learn something.
    Wish that I had more to offer, but good luck,
    Hunt

  • My Yahoo Mail is not Working on any of my Apple devices,  It attempts to download new email but then stops.  Any ideas?

    My Yahoo Mail is not Working on any of my Apple devices,  It attempts to download new email but then stops.  Any ideas?

    I, too, am having a problem with my Yahoo email account on my first generation IPad. I can't download my emails to my IPad from the server. The IPad looks like it's trying to download them but can't do it. I am able to send emails from my IPad with my Yahoo account.
    This problem started yesterday, Aug., 25th, the day after I uploaded the last update from Apple. I am able to set up another email account through Sbcglobal that will download my emails to my IPad but it is not sync'ed with my desktop mail which creates a mess when I move or delete emails.
    I've tried deleting my Yahoo account and then adding it back. Also I've reset my IPad and I've done a full restore.
    I think it has something to do with the last update, which I believe was a security update, which may have reset the firewall. That's just a guess.
    Has anyone figures out anything else?

  • I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then onl

    I have moved old Back Up files from my external hard drive to the trash and as the Trash previews the files, i.e. counts them (over 850,000 files) it then begins to delete but then stops. Is it possible to move the files out of the Trash file and then only delete a small amount at one time?

    See
    Deleting backups via the Finder on Lion 10.7.x or later:
    http://pondini.org/TM/12.html
    Hold option (alt) while emptying the Trash.
    See also
    http://pondini.org/TM/E6.html
    Message was edited by: WZZZ

  • Mavericks has broken most stock apps, app store ,preview, messages, facetime ect the list goes on they bounce in the menu then nothing its been like that since installing mavericks fixed briefly by reinstalling but then stopped again very quickly

    mavericks has broken most stock apps, app store ,preview, messages, facetime ect the list goes on they bounce in the menu then nothing its been like that since installing mavericks fixed briefly by reinstalling but then stopped again very quickly
    any help ?

    You most likely ran a defective third-party "utility" such as "CleanMyMac" or "MacCleanse" that purports to "clean up" "junk" files. What it really does is to corrupt the operating system and many applications.   
    The first thing you need to do is remove that software according to the developer's instructions. Never install it, or anything like it, again. Then see below.
    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

  • HT201272 This method is exactly how I'm trying to get my music on my new iPod touch, it starts downloading but then stop and says unable to download at this time. What the **** is going on ?

    This method is exactly how I'm trying to get my music on my new iPod touch, it starts downloading but then stop and says unable to download at this time. What the **** is going on ?

    Try going to Settings>Store and sign out and sign back in.
    It also could be due to an Apple server problem. and yu will just have to wait and try again.

  • What do I do if I can't upload photos into my photobook?   My upload always starts but then stops.  All I have the option of doing then is cancel or retry.  Has anyone else had this problem and found a solution?

    What do I do if I can't upload photos into my photobook?  Every time that I try, the upload starts but then stops.  Then the only options I have are to cancel or retry.  Has anyone else had this problem and how have they solved it?

    I solved the problem. Had nothing to do with Mac or iphoto. Problem must be my the internet connection to my provider.
    Upload at my office worked without any problem. One problem solved, now i am aware with a lot of discussions with my providers helpdesk  ;-)

  • Creative Cloud locked up and had to Uninstall. Upon reinstall it initializes and downloads 2/3 but then stops every time. How to remedy this?

    Creative Cloud locked up and had to Uninstall. Upon reinstall it initializes and downloads 2/3 but then stops every time. How to remedy this?

    After running cleaner tool, follow below steps :
    End all Adobe process from Task Manager .
    1) Open Control Panel and Navigate to Control Panel\Programs\Programs and Features .
    Under Program and Features list,If present remove Adobe Creative Cloud option.
    2) Open C:drive and navigate to C:\Program Files (x86)\Common Files\Adobe.
    Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
    3) Navigate to C:\Program Files (x86)\Adobe.
    Open Adobe folder and if present delete Adobe Creative Cloud folder.
    4) Press Windows button (located between Ctrl and Alt buttons) along with R button together at a time , you will get a run command window.
    Type in below command and hit 'Enter' key.
    appdata
    Then navigate to Local>Adobe.
    Open Adobe folder and delete folders named AAMUpdater and OOBE.
    5) Click on the below link and download Adobe Application Manager and install the same.
    Once the installation process is completed , it will create shortcut icon on Desktop.
    Double click on it and update, it will get updated to Creative Cloud :
    http://download.adobe.com/pub/adobe/creativesuite/cc/win/ApplicationManager9.0_all.exe

  • How can I open Premier Elements 11 Organizer when it Stops Working before it opens up?

    I have brand new Premiere Elements 11 Software but cannot get the Organizer to start up.  It trys to open then shows an error message saying Elements 11 Organizer has stopped working.Thanks.

    Richardbeds
    1.On what computer operating system is your Premiere Elements 11 running? And, just to get it out of the way, do you have the latest version of QuickTime installed, and are you running Premiere Elements 11 from a User Account with Administrative Privileges?
    1. Delete the settings (preferences) file which is name .psa.prf. Assuming Windows 7 or 8 64 bit, the route to it is:
    Users
    Owner
    AppData
    Roaming
    Adobe
    Elements Organizer
    11.0
    Organizer
    and in this Organizer Folder is the psa.prf file that you delete.
    Make sure that you have the Folder Option "Show Hidden Files, Folders, and Drives" active so that the path will be visible.
    The shortcut to all that is...as you hold down the Shift+Ctrl+Alt computer main keyboard keys (altogether), double click the Organizer tab at the bottom of the Premiere Elements 11 Expert view workspace. A pop up should appear asking your permission to delete this settings file. Click Yes to that.
    2. How are you trying to gain access to the Elements Organizer...
    a. Welcome Screen - Organizer
    or
    b. Clicking on the Organizer tab at the bottom of the Premiere Elements 11 Expert view workplace.
    If a or b lets you get into the Organizer, then you might consider creating a new catalog (File Menu/Catalog Manager) as well as disabling Auto-Analyzer options et al under Elements Organizer workspace Edit Menu/Preferences/Media-Analysis.
    Let us start there. We will be watching for your results.
    Thanks.
    ATR

  • Download starts but then stops...

    So I've read other forums and searched this website for one, but I still can't find the answer. Whenever I try to download the file it will start but then after some time get stuck on a percentage(different every time) and then stop all together. I've tried using different browsers and a download manager, I have plenty of storage space also. It still won't work
    I've heard that this may have something to do with my internet and secruity? Or something? Can someone tell me how to fix that? My technical skills are very very low and this is the first time I've used a mac.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem(s)?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Premier Elements 11 installed but does not launch

    I installed premier elements 11, the installation did not have any problems, but when I click on the icon nothing happens. It does not give an error message, is does not try to do anything, it simply does not launch. I uninstall, turn off the norton software, did a clean boot to prevent other services to load, re-installed the software and the problem continues.
    I have window 7 64 bits 8 gb memory, more than enough disk space. What else can be wrong that is preventing the application from launching?

    Hi,
    Could you please try the following solutions and see if any of these work:
    1. Navigate to 'PhotoshopElementsEditor.exe' located inside:
        Win x64: C:\Program Files (x86)\Adobe\Photoshop Elements 13 
        Win x32: C:\Program Files\Adobe\Photoshop Elements 13
           Right click on 'PhotoshopElementsEditor.exe' and select 'Run as Admin'
    2. Just after this keep on pressing 'Ctrl+Alt+Shift' on Windows (or Command+Option+Shift on Mac). You will get a popup asking to delete Elements settings file.  Click Yes.
    If the above does not work, please try the following:
    3. Please rename SLCache folder present at location "<root drive:>\Program Files (x86)\Common Files\Adobe\SLCache"
    Also please rename opm.db on your machine to resolve this issue @  <root drive>\Users\<user name>\AppData\Local\Adobe\OOBE
    Now re-launch the application.
    4. In case any network printer is attached try to launch without network or printer uninstall or make different printer as default.
    5. Try launching with anti-virus off or removing PSE from conflicting list. 
    If none of these work, please let me know.
    Regards,
    vaishali

  • Firefox begins to start but then stops before loading any screen. Profile manager/safe mode appear then disappear. Task manager shows programs briefly in CPU then they disappear. Uninstall & reload makes no difference. Any ideas please ?

    When we clicked as usual on the firefox icon the egg-timer started then went off. Nothing started up.
    Checking the Task Manager showed firefox.exe briefly using the CPU then it dropped off the list.
    We tried to uninstall and reload from the mozilla site (http://www.mozilla-europe.org/en/firefox/). Installation seemed to work ok, but the same problem recurred when we tried to start firefox.
    Did this again, this time removing bookmarks, etc. same result.
    Tried to use the profile manager - the screen came up but disappeared before we could use it.
    Same thing happened when we tried to start in safe mode - screen briefly appeared but then disappeared.
    Tried googling in IE to solve the problem but nothing seems to apply.
    Have run all security checks but no apparent bugs or problems.
    Have had to abandon firefox and use another browser. How do we get it back please ?

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox without informing you about that, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox.
    See [[Server not found]] and [[Firewalls]] and http://kb.mozillazine.org/Firewalls

  • Export beging, show some progress in the export bar, but then stops

    Hi !
    Having problems exporting my edited files from Lightroom 4 in my IMAC. After editing my photos to export them, there is an immediate indication of transfering, but suddenly stop and there is no further progress in the transfer. Please help.
    Gilberto

    Works OK one at a time?
    Depends on which photos? or which photos don't make a difference.
    Depends on export service, or settings, or ...
    Any other info you can think of that might be pertinent - do provide..
    When you're having a strange problem, the devil's in the details.. - usually everything works (partial "ha-ha" there).

Maybe you are looking for