Premier Elements installation seemed to work, but...
There's no icon, just a Premier 10 folder on the desktop with "contents" and read me files. I had 8 and downloaded to update to version 10. It appeard to go through the installation and set up process, but i guess a fuse blew somewhere... Do I need to kill 8 to get 10 to come up?
Premiere Elements has its own forum where the folks there are more knowlegeable about the app:
http://forums.adobe.com/community/premiere_elements
Ken
Similar Messages
-
Adobe Premier Elements 10 has stopped working error message/Audio issues
I'm working on a project for about a week. I almost finished it, "shared" it to my computer, and watched it thru windows media player. I thought of something else that I could add to the audio, so I went back into the project in PE10 and put small (2-3 seconds) audio clips on audio track 3. Once I did that, PE 10 would not allow me to put any audio effects on that track. (I went into some older longer projects that I have and it allowed me to put effects on any audio track).
So, I moved my short audio clips to the Narration and Soundtrack tracks. It finally highlighted the App;y button for the audio effects. Now, the problem is that I can't play or click onthe timeline or move the timeline indicator without PE10 closing out of my video. As soon as I try to do anything, it says "Adobe Premier Elements 10 has stopped working" and it closes the program.
I can open my other projects and everything seems to work fine on those and it doesn't close out, but it won't allow me to do anything in this particular project.
Again, I have been going into and out of the project for a week and all of the sudden it won't let me work on it. It's only about a 3 minute project, so I don't know why it would have trouble.
Oh, and it also un-rendered everything.
Any thoughts?
Thanks!LOTS more information is needed for someone to try and help
These questions below may be for a different product... but the information you need to supply is the same, for the products you use
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406 -
My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect. The separate menu panel does not appear either. Help with this?
BINGO !!!!
Thanks so much Woodsroad. I had the exact same problem with my Dell Windows 7 64 bit with AMD Radeon 6700 Video card.
All the video tests passed with flying colors.
The sniffer rename trick fixed the problem.
Thank goodness for the internet! -
I just used stellar phoenix mac data recovery and it seemed to work but now my files won't open. Even though they are "jpeg, mov" files, the error message is "could not be opened". The movie's file format isn't recognized. " Any help or are they corrupted?
Sounds to me like the file is probably corrupt. If you had hard drive corruption or damage, that could easily result in recovered files not being fully intact. If you were trying to recover accidentally deleted files, it's possible they might have been partially overwritten before recovering. There are never any guarantees with file recovery.
Without more information on the circumstances that led you to try recovery, it's hard to give advice on what to try from here. You could always try another file recovery tool, like Data Rescue 3. Just be sure you're taking appropriate precautions when doing recovery. See Recovering deleted files. -
[Fwd: Re: Mbean method seems to work, but nothing happen]
Forwarding to security news group for help ...
-------- Original Message --------
Subject: Re: Mbean method seems to work, but nothing happen
Date: 18 Jun 2004 15:25:51 -0700
From: Claudio Lazo <[email protected]>
Reply-To: Claudio Lazo <[email protected]>
Newsgroups: weblogic.developer.interest.management
References: <40d21c98$1@mktnews1>
Hi Folks,
I have news about this case and maybe help you to help me find out how
to follow
to give the next step.
I am using SimpleSampleRoleMapper sample at dev2dev to test my case. I
discovered
something I had not figure out until now.
weblogic.management.commo.WebLogicMBeanMaker creates an class called
SimpleSampleRoleMapperImpl.java which has my method "resetCache" but
empty, so
back to documentation I think i understood what they wanted to say when
said :"
If you included any custom operations in
your MDF, implement the methods using the method stubs." (Located in page
http://e-docs.bea.com/wls/docs81/dvspisec/credmap.html#1142366)
So now I can´t find a reference to do a link between
SimpleSampleRoleMapperImpl.resetCache()
method
and SimpleSampleRoleMapperProviderImpl.resetCache() method.
So Anyone know how to make that connection, or maybe some reading I can
do to
write my implementation?
Thanks again
Claudio
Claudio Lazo <[email protected]> wrote:
Hi Folks,
I have created a Custom RoleMapper Security provider, who is a MBean,
I included a custom method called resetCache who do some reset inside
it.
The problem is when I try to call the method no exception is thrown,
however no line inside the method is executed.
So my question is if there is something I am missing, I am able to see
with my client properties inside MBean.
I ejecute method using mBeanHome.getMBeanServer().invoke(mBeanName, "resetCache",null,null);
Any help is valuable, thanks
ClaudioHi Folks,
I have news about this case and maybe help you to help me find out how to follow
to give the next step.
I am using SimpleSampleRoleMapper sample at dev2dev to test my case. I discovered
something I had not figure out until now.
weblogic.management.commo.WebLogicMBeanMaker creates an class called
SimpleSampleRoleMapperImpl.java which has my method "resetCache" but empty, so
back to documentation I think i understood what they wanted to say when said :"
If you included any custom operations in
your MDF, implement the methods using the method stubs." (Located in page
http://e-docs.bea.com/wls/docs81/dvspisec/credmap.html#1142366)
So now I can´t find a reference to do a link between SimpleSampleRoleMapperImpl.resetCache()
method
and SimpleSampleRoleMapperProviderImpl.resetCache() method.
So Anyone know how to make that connection, or maybe some reading I can do to
write my implementation?
Thanks again
Claudio
Claudio Lazo <[email protected]> wrote:
Hi Folks,
I have created a Custom RoleMapper Security provider, who is a MBean,
I included a custom method called resetCache who do some reset inside
it.
The problem is when I try to call the method no exception is thrown,
however no line inside the method is executed.
So my question is if there is something I am missing, I am able to see
with my client properties inside MBean.
I ejecute method using mBeanHome.getMBeanServer().invoke(mBeanName, "resetCache",null,null);
Any help is valuable, thanks
Claudio -
MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolve this problem?
Try booting in Safe Mode by holding your Shift key down when booting. Also, try holding the eject key down when booting to eject the DVD. If you plug a mouse in and hold the clicker down when booting, that should eject the DVD.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101 -
I can't read acsm files on my e-reader after transferring them from the pc with ADE. it seems to work, but then when I try to open the files on the e-reader it says "open failure". what's wrong?
The acsm file is not the book, it is a ticket to get the book. I sometimes get library books online, here is what I do.
1. Start ADE on the computer
2. Go to library website and find the book I want to download.
3. Click on the download link
4. In windows 7 a box opens asking whether I want to open( or run) or save the acsm file
5. Click open/run and ADE downloads the book into the "Library"
6. Transfer the book (epub file) to the reader. -
Still battling Premier Element installation.
I have a download from March--will not install.
I have a download from June--will not install.
I have the CD--will not install.
I keep getting a message to uninstall and reinstall, error message:1
Quicktime no longer works.
I downloaded the Adobe Download assistant and foolishly choose to not install at that time and now it is sitting on my desktop with absolutely no menu to use it
What ticks me off is I had it installed and registered and working. When I opened PSE 12 yesterday it said I needed to register it, even though I had.already done so. It was a nuisance but within a few minutes I was back editing photos. I thought that since that was so easy I might as well do Premier elements, too. It would not open, even though it had before. I have been on a downward slide since. My feeling is this: you put the disk in, click a coupla times and it works! I have downloaded more crap from Adobe (Air, twice; Quicktime, twice; Application manger, twice: download assistant, even Creative cloud) in the fruitless pursuit to install something that really could be semi-easy but is not for reasons unknown. I've "installed" PRE STI64 installer- twice; It just sits there with Download Assitant like two lumps of clay. There is no menu to allow me to use it. It was the only .exe file I could find in the PRE12 folder.
I must stress I love PSE 12, I am not a critic of the software, I have no axe to grind; in short, I am an ally, But this business with Premier Elements is driving me to distraction. I have spent hours, many hours of frustration with this project.
One more thing, I cannot find a means by which to edit my user name and remove my email address from it.
I wish to thank those of you who have so kindly and quickly responded to my call for help.
Davidoctopodian
I do not work for Adobe nor am I affiliated with in it in any way. I have no promotional interests in Adobe, only the interests of a fellow Premiere Elements user. So, please keep that in mind in what I am about to write.
I think we got off on the wrong foot with this thread issue. All the chat about duplicate threads did not help matters. As you can see, there was no troubleshooting of issue ever started for your issue. And, it looks like your thread (duplicate or not) got lost in the daily traffic here. I apologize for the latter since I try to make sure that no thread is left unanswered with a viable answer. I do that because I want to, not because I am told to do that. (It does not take me from June 14th to June 21st to think about an issue as reflected in the lapse of time since my last post in the thread that we are in now until now.)
If you have decided to close this thread and pursue other avenues for your video editing, we wish you the best.
If you want to get into some real troubleshooting, then please let me know. The following is a preview of my initial troubleshooting strategy based on what you wrote.
1. What computer operating system is your Premiere Elements 12 to work on?
2. The fact that QuickTime, as a standalone software, is no longer working in your computer environment implies that Premiere Elements 12 is probably not the core of the issue.
3. I would like you to contact Adobe via its Adobe Chat to sort through the topic "Downloading, Installing, and Setting Up". Two reasons...it can offer you remote control of your computer for troubleshooting and it may have undocumented information that impacts your specific situation. To do that, click on the following link, and, when it opens, click on "Still need help? Contact us." to open Adobe Chat. I set the following link to open to that web page with the "Still need help? Contact us." spot to click on. Not sure the link will hold the set. Hope so. If not, you may have some navigating to do.
Contact Customer Care
In the process you should finally arrive at what looks like the following
Under Contact options, Recommended, click on the Chat choice. This appears to be a new Adobe format for Adobe Chat
contact.
Please let us know the outcome if you do pursue this troubleshooting opportunity. If you opt not to, you need not reply to
this thread and can just consider your participation in the thread closed as of your post 4.
Best wishes
ATR -
iOS 5 seems to work on my ipad, but apparently something went wrong when restoring. I lost music and movies, and when I connect the ipad to my macbook, I get the message that itunes was interrupted when restoring. I try to restore again and I get the message "An error occurred while restoring this iPad (-50)." What happened and what should I do?
I have had the same issue since day 1 of the ios5 installation. I always hit "Cancel" and then the iPad eventually shows up again in iTunes. Then a few hours later, I get the same message again. Annoying, but I've not found a way around it.
-
Premier Elements wont open or work on Windows 8 64bit operating system.
I have a windows 8 64 bit operating system. I have Adobe Photoshop Elements 12 and Adobe Premier Elements 12 and downloaded the 64bit operating software. This is the 2nd computer I've installed the software on as I upgraded to a better computer. Photoshop works just fine however, Premier Elements will not open on this computer. Every time I attempt to open it a prompt to login within 12 days or I will no longer have access appears. I login with my adobe username and password which are the same for when I downloaded the software in 2013. I uninstalled and re-installed Premier Elements and still have the same issue. Upon re-install I was able to enter the serial number, but this still did not fix it. I can't get Premier to run and need help figuring out the problem. Has this happened to others and what's the solution if so? Thank you
jamess
Please review the solutions in the following two links related to Premiere Elements 12/12.1 Editor will not open, then let us know if any of the suggestions worked for you.
http://atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
ATR Premiere Elements Troubleshooting: PE12: Sign In Failure (Connect to Internet or Fix Computer Clock)
Thank you.
ATR -
Help? Premier Elements 10 is not working!!!
Two Adobe techs had me download Premier Elements 10. Neither one works. After my last extraction I got this window message. ' this installation package is not supported by this processor type. Contact yor product vendor'
both checked out the windows version,
my RAM
my available memory and said I was good.
The first sent me a 32bit version.
the second sent me a 64bit version... said it was easy just follow the prompts...AFTER he took control of the laptop to see what he could do....help. What more can I do?
Got the above message. I am to have an appointment tomorrow at 8am pacific time and my videos cannot load properly.
Help. Help. Help. 530-622-4011
LorrenePremiere Elements has its own forum, where the folks are more knowledgeable about the program:
http://forums.adobe.com/community/premiere_elements
Ken -
Premier Elements installation (Windows installer) problem.
I cant install premier elements 12 on my computer, I get a windows installer error message as per the following. I have tried to install the DVD and a downloaded version. Has anyone had (and overcome) the same or similar issues? Many thanks.
Error message:
Windows ® Installer. V 5.0.7601.17514
msiexec /Option <Required Parameter> [Optional Parameter]
Install Options
</package | /i> <Product.msi>
Installs or configures a product
/a <Product.msi>
Administrative install - Installs a product on the network
/j<u|m> <Product.msi> [/t <Transform List>] [/g <Language ID>]
Advertises a product - m to all users, u to current user
</uninstall | /x> <Product.msi | ProductCode>
Uninstalls the product
Display Options
/quiet
Quiet mode, no user interaction
/passive
Unattended mode - progress bar only
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
f - Full UI (default)
/help
Help information
Restart Options
/norestart
Do not restart after the installation is complete
/promptrestart
Prompts the user for restart if necessary
/forcerestart
Always restart the computer after installation
Logging Options
/l[i|w|e|a|r|u|c|m|o|p|v|x|+|!|*] <LogFile>
i - Status messages
w - Nonfatal warnings
e - All error messages
a - Start up of actions
r - Action-specific records
u - User requests
c - Initial UI parameters
m - Out-of-memory or fatal exit information
o - Out-of-disk-space messages
p - Terminal properties
v - Verbose output
x - Extra debugging information
+ - Append to existing log file
! - Flush each line to the log
* - Log all information, except for v and x options
/log <LogFile>
Equivalent of /l* <LogFile>
Update Options
/update <Update1.msp>[;Update2.msp]
Applies update(s)
/uninstall <PatchCodeGuid>[;Update2.msp] /package <Product.msi | ProductCode>
Remove update(s) for a product
Repair Options
/f[p|e|c|m|s|o|d|a|u|v] <Product.msi | ProductCode>
Repairs a product
p - only if file is missing
o - if file is missing or an older version is installed (default)
e - if file is missing or an equal or older version is installed
d - if file is missing or a different version is installed
c - if file is missing or checksum does not match the calculated value
a - forces all files to be reinstalled
u - all required user-specific registry entries (default)
m - all required computer-specific registry entries (default)
s - all existing shortcuts (default)
v - runs from source and recaches local package
Setting Public Properties
[PROPERTY=PropertyValue]
Consult the Windows ® Installer SDK for additional documentation on the
command line syntax.
Copyright © Microsoft Corporation. All rights reserved.
Portions of this software are based in part on the work of the Independent JPEG Group.download from the link here,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
G560 PXE error; OneKey Recovery seems to work, but then I get BSOD upon boot
I've got a 3-year old G560 and a few days ago, I ran into a PXE error out of the blue. I didn't really change anything about the computer's setup, and it may have been caused by commuting the laptop.
I already went through the whole F2 setup regimen of disabling network boot, changing over to compatible mode, trying every combination of boot order, etc.
When I was in compatibility mode, I was able to get the OneKey Recovery to work. There's no DVD involved, seems like it's stuck in that partition. I never set a restore point, but I didn't mind a factory reset. So I did the OneKey factory reset and it took about 15 minutes and it seemed to be okay, but then when I try to start the laptop, it will show the Windows logo, freeze there for a few seconds and then it flashes the blue screen of death for a split second (impossible to capture the error codes).
If I try it in safe mode, it shows the files that are being loaded, and it BSODs right after classpnp.sys
Now, I guess my main question is if OneKey will appear to work and yet maybe the HDD (hard drive) does not work. Could it be a matter of just replacing the hard drive? I did pull out the hard drive and re-mount it. Also the motherboard and re-mounted it. Is the OneKey function separate from the hard drive?
The laptop is so old that I wouldn't want to invest much money in its repair (warranty is past expiration date), but it's also been my daily computer, so I wouldn't mind if it was just a case of replacing a hard drive. With these problems, would it just be possible to make Ubuntu into my primary operating system by using an install disc?hi stophammertime,
Welcome to the Forums.
It looks like you have some bad sectors on the HDD that's why the OKR didn't work or for some reason, OKR worked but the bad sectors corrupted the OS installation files. To verify this, you will need to run diagnostics on the HDD (try ultimatebootcd as it has diagnostic tools for ever brand of HDD's)
Also, the OneKey Recovery runs on a hidden partition on the HDD (usually the last few sectors of the drive). It's possible to trigger the OneKey Recovery if the partition structure isn't damage but if the target drive has bad sectors (i.e. Drive C:\), it may fail to image the drive or corrupt the installation files.
If verified that you have bad sectors on the HDD, you will need to replace the HDD and from here, you can:
1. Use a recovery disc to restore the default OS (this is only psosible if you have created one using this method)
2. If you can still read the COA product key at the bottom, you can burn an ISO copy on this website and use it to clean install Windows into your PC (if you get issues activating Windows, try to activate by phone).
3. Scratch Windows and use Ubuntu as you're primary OS.
Hope thish elps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
New AIrport Extreme - seems to work, but....
Hey all:
Just received an Airport Extreme to replace old D-Link wireless router. Connected everything, and all seems to work as it should. But.... The AE unit's amber light on the front is continuously flashing. The Setup Guide says this indicates one of a number of malfunctions, but I'm able to connect to the internet fine via two wireless computers. I'm also able to print via the USB-to-AE connected printer.
What does this mean? Should I be looking for what's up? Any ideas?
Thanks,
Carlos AldenIf it is functioning, then that means you may not have secured your network, or some feature in the process was ignored that is unnecessary for your service to work. If it ain't broke don't fix it. But securing your network with WPA2 or better encryption if possible is a good idea since it will avoid others from using your bandwidth on your connection, in addition avoiding the possibility that a non-secure website might gather personal information easier when it is unsecured.
Message was edited by: a brody -
Premier elements installer question
I downloaded premier elements 12 and photoshop elements 12 and neither will lauch an installer.
how do I get this software installed and operable?Nobody can know. you have not provided any system information. The installers not even launching, however, probably means that you don't meet the system requirements. Look them up on the product pages.
Mylenium
Maybe you are looking for
-
Does ColdFusion support nested complex data types when building Web Services? See example CFCs below. I keep getting a ServiceMethodNotFoundException. In my SubmitNoticeOfAppt.cfc, the cfargument data type is NoticeOfAppointment.CFC which referenc
-
NullPointerException in oracle.jdbc.driver.T2CConnection.logon
Hiya, I know little about Java, so I'm a bit lost when I get this error: java.lang.NullPointerException at oracle.jdbc.driver.T2CConnection.logon(T2CConnection.java:325) at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:347) at
-
Hide navigation pane of adobe reader through scripting
Hi.. I'm looking for a script to hide the navigation pane of the adobe reader through scripting, is there any way I can achieve that? my main objective is to restrict user from attaching a file by using navigation pane because I'm already giving butt
-
I have Photoshop Elements 11, downloaded with a serial number. I have now upgraded my computer. Can I load that version to my new computer?
-
Upgrade Oracle Lite 9i to Oracle Lite 10g rel3
Can you please advise me on the effort and impact in attempting to upgrade Oracle Lite 9i to Oracle Lite 10g rel3 ? Thank you.