Premier pro, can i save multiple trimmed clips in h264 to new files.

i have to reduce the size from 120gb to 20 gb by cutting out the unwanted but leave in seperate files.

You certainly can do this in Premiere by importing a clip, trimming it and exporting to whatever file type and quality you desire.  However if that's all you're looking to do, it's like using a $200,000 Bentley to take your kid down the block when all you need is a wagon.
If you are on a Mac, Quicktime Player will allow you to trim clips and resave the trimmed version, and it's free as part of the OS.

Similar Messages

  • How can I save multiple separate edited images from one original file?

    I shoot NEF raw images and am getting used to the way LR5 editing works without altering the file in any way. Now I wonder how I can create multiple edited images this way.

    Thank you, that was spot on. It will help a great deal right now as I am taking multiple crops from shots of the ocean looking for something striking.
    I doesn't seem to matter if I take a copy while editing or before I start editing, I can always reset the original and start again.
    Is it possible to rename the copy? I had a look around here and in LR Help but rename doesn't come together with virtual copy.

  • Premier pro cs5 saving multiple trimmed clips as indivdual files in format h264 mov, what is the quickest way to do it. i have 280 trimmed files.

    premier pro cs5 saving multiple trimmed clips as indivdual files in format h264 mov, what is the quickest way to do it. i have 280 trimmed files.

    Hello Ashraf,
    Sorry you didn't get any help on this post. In the future, please contact Adobe Support for 1-1 assistance on issues like this: Contact Customer Care
    Thanks,
    Kevin

  • How can I save multiple titles under the same DVD?

    I use HandBrake to rip DVD's into iTunes. How can I save multiple titles under the same DVD? For instance, I have a Jimi Hendrix documentary that comes with special features, such as concert performances. I would like to have the main feature and the special features saved in my iTunes under the same title, perhaps as different 'tracks' (kind of like how different songs can be saved under the same album).
    Is there a way for me to do this, or am I chasing phantoms?

    *This response is for iPhoto 11 (v9). If you're using an earlier version, please post back and let us know. Troubleshooting steps are not the same for different versions. To find out which iPhoto you have: iPhoto Menu -> About iPhoto)*
    Duplicate the photo first. (Photos -> Duplicate). This means that you will have multiple copies of the master as well as the edited version.
    If you use versions like this often and wish to have only one master then you can do this with Aperture.
    Regards
    TD

  • How can I save multiple Iphones into Itunes?

    How can I save multiple Iphones into Itunes as independent devises? In the way we have it now they are sinking into each other.

    How to use multiple iPods, iPads, or iPhones with one computer

  • Can't select multiple video clips to import into iMovie

    Hi, i can't select multiple video clips to import into iMovie, it only lets me import one video at a time. Apple please fix in next update or if anyone has a solution please post.

    Obviously you can not select the video to import until after iMovie populates the list of videos that are available to be imported
    LN

  • How can we save multiple IDocs as a single Flat file in R/3 system ?

    Hi,
    How can we save Multiple Idocs as a single Flat IDoc in R/3 (Not xmlized)
    Kulwinder

    Hi,
    Check this link for Mutiple IDOCs into single File.
    /people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm
    Regards,
    phani
    Reward points if Helpful:)

  • HT1338 I can not empty my trash can my MacBook Pro can not save anything because of it.No room available error.what can I do? I also have Windows 7 on  my Mac.

    I can not empty my trash and my MacBook Pro can not save anything because there is no space left".No room available error."what can I do? I also have Windows 7 on  my Mac.

    If it were me, I'd get a new hard drive or SSD and put it in an external enclosure. Boot into the recovery partition, format the new drive (not the old one) and install the OS to it. Shut down the Mac, open it up, and swap the drives. You may be able to read your data from the old one externally if you're lucky. If you're very lucky you may be able to use Migration Assistant to move all your stuff to the new drive.
    Look at ifixit.com for the exact procedure to get to the drive on your model. If it's a unibody it's pretty simple.
    http://www.amazon.com/Sabrent-2-5-Inch-Aluminum-Enclosure-EC-TB4P/dp/B005EIGUD4/ ref=sr_1_3?ie=UTF8&qid=1392154588&sr=8-3&keywords=2.5+enclosure

  • How can I send multiple pictures to the Kodak link (under file & then order prints)? if the photos are not sequential can it be done?

    how can I send multiple pictures to the Kodak link (under file & then order prints)?  if the photos are not sequential can it be done?

    Does the order matter here?Because the photos will be sent for printing. If there is any other reason, can you please cite example.

  • How can I save an EXE front panel image to a file?

    The methods to save a VI front panel image to a file don't work on executable applications. How can I save an EXE front panel image to a file? (LabVIEW 6.1)

    Hi,
    i wrote some vi that save FP to image and created exe and it works fine. How do you save FP to image in VI?
    If you use VI server method "Get Panel Image" and use "Write JPG file" ( or BPM) it works fine.
    Attachments:
    fp.zip ‏40 KB

  • How can I save a "trimmed" QuickTime movie at original high rez?

    I use QuickTime 10.1
    In the past, after lobbing off part of a QT movie using the "Trim" function, I was never asked what quality to save it in, it just saved when I clicked Save. I never imagined I was losing quality by saving a trimmed movie.
    Now, however, when I click Save a window pops up giving me two choices: 480p or 720p. Are we to assume the movie we're working on was no greater resolution than 720 to start with? Or is our movie being condensed against our will?
    A test suggests the latter is true. Even if I lob off just a teensy bit, a file saved at 720p is VASTLY reduced in size. What is going on here, and how can I save my movies at the same high quality they start out with? I find nothing in Help about this.
    Secondly, if I may slip this less important question in as well: Sometimes when I click Save I get an error message that "This operation cannot be completed," and QT crashes. This has happened a number of times, and I can't see that I'm doing anything wrong. Any clues?
    Many thanks.

    In the past, after lobbing off part of a QT movie using the "Trim" function, I was never asked what quality to save it in, it just saved when I clicked Save. I never imagined I was losing quality by saving a trimmed movie.
    Are you referring to a previous version of QT or your current v10.1 Lion version? Since the introduction of Snow Leopard and QT X v10.0, Apple has been moving towards a single combined "Save", "Save As...", and "Export" function with the name shifting from "Save" to "Export" as it evolved. (I.e., in the latest Mountain Lion rendering you are advised to read the "pop-up" option description to tell if you are performing a "Save/Save As..." or an "Export" action.)
    Now, however, when I click Save a window pops up giving me two choices: 480p or 720p. Are we to assume the movie we're working on was no greater resolution than 720 to start with? Or is our movie being condensed against our will?
    Since you have not indicated the encoded or anamorphic dimensions for the file you are working on, it is difficult to determine if the QT X player is acting normally or not here. Basically, whatever you are doing is triggering an export action which limits the dimensions to specific category levels. You cannot, for instance, export a 1280x544 (2.35:1) aspect file to a 1920x816 (2.35:1) aspect file but you can export it to a 720p 2.35:1 aspect file because it woud fit within the 1280x720 defined 720p dimension window. I.e., unlike QT 7 Pro, the application will not let you "upscale" the source file during the encode since this would reduce export quality and is the same as exporting the file at its current dimensions and simply rescaling the playback dimensions—a much faster workflow. As to "being condensed against our will," this could be the case in some instances. For instance, a 1280x720p30 file might be re-compressed to a 960x540p30 file for mobile device compatibility which, in turn, usually depends on the specific method of accessing the export action.
    A test suggests the latter is true. Even if I lob off just a teensy bit, a file saved at 720p is VASTLY reduced in size. What is going on here, and how can I save my movies at the same high quality they start out with? I find nothing in Help about this.
    If you are referring the to QT 7 Pro "Save As..." workflow and you still have your QT 7 Pro registration key, then the obvious answer would be to install the QT 7 v7.6.6 Player and key it for "Pro" use. Both QT players can be installed and used under OS X v10.6, v10.7, or v10.8 simultaneously. (I.e., by default QT X installs and runs/updates in "Applications" folder while QT 7 Pro installs and runs/updates from within the "Applications/Utilities" folder where they should be left.
    Secondly, if I may slip this less important question in as well: Sometimes when I click Save I get an error message that "This operation cannot be completed," and QT crashes. This has happened a number of times, and I can't see that I'm doing anything wrong. Any clues?
    This would be more difficult to answer. Since QT X is a product "in development" and has proven to be less stable than QT 7 Pro and includes far fewer editing features, I, for one, do not use it for any serious edits no matter how minor they may be. On the other hand, I have no real problems with its playback and conversion features as long as I work within the application's intrinsic limitations as it continues to evolve.

  • How can I save multiple links using the "save link as" function?

    I'm trying to save about 300 pdf files. The link to each one is listed ona website. To save each one I'm right clicking on the link, selecting "save link as" and repeat.
    How can I select multiple links and save them?

    Actually you can save multiple page pdf's in elements.
    Try something like this:
    (This is easier if you have the project bin open)
    1. Select the first page
    2. Right click on that page in the project bin and choose Add Blank Page or as many pages as you need.
    3. Use the move tool and drag your pages down into the blank pages in the project bin
    4 Then File>Save As>Acrobat.PDF

  • How can I copy multiple text clips and paste them separetly?

    Vista OS

    The "clipboard" is a Vista function, not a Firefox support issue. I don't use Vista and with WinXP I use an external program called Clip Trakker to save multiple clipboard entries for later recall. Try this forum for help: <br />
    http://lounge.windowssecrets.com/index.php

  • New email system - how can I save multiple email a...

    In the previous system it was possible to "save attachments" as a single click operation.  I can find no way of doing this in the new system.  Do I really have to save each attachment separately? (Have just received an email with 17 attachments!!)
    Can't say I'm enjoying the new system - it's slow, cumbersome and times out all the time - even in mid email. 

    Use an email client such as Thunderbird. I do and have had no sign of the issues that you and others have reported here; as it happens, I received an email last week with 32 attachments - no problem. In addition, storing you stuff on your computer (properly backed up) is inherently safer than the cloud (ask the starkers celebs) and the quirks and cosmetics of the new webmail are invisible.
    You can click the white star next to this message if you think it was helpful.

  • Premier Pro CC 2014 crashing, wasting enormous time, not able to load files into previous rev - this is crazy!!!

    SOMEONE AT ADOBE PLEASE HELP!!!
    I have had no problems editing Red Epic 4K R3D files in the past revisions of Premier CC but ever since creative cloud updated me to the latest Premier CC 2014 (8.0.1) I cant get any serious work done as my system is crashing on startup, or after a few minutes of work, freezing on playback at times, giving me artifacts at times and is just a miserable and frustrating experience I can get NOTHING done with!!!
    How could Adobe release a piece of so called professional software like this with these now obvious MAJOR issues so many of us are experiencing, wasting massive time and money for all of its users and how can I get this running properly and stable as our livelihoods depend on this software to work and thats what we pay Adobe for ???
    I am currently working on :
    Mac OSX 10.9.3
    Mac Pro 5,1 Tower
    Nvidia GTX 660 2GB Graphics card
    Cuda Drivers 6.0.37
    I use a SSD swap drive and boot drive of 1/2 TB
    I have a 6TB internal Raid for all my media files
    I am editing 4K Red R3D files in a 4K timeline that I had no problem editing in previous version of Premier CC ???
    If Adobe would have thought before changing the file compatibility with the new Premier Pro CC 2014 where you cant load a file updated to this new version back into Premier Pro CC previous revision or included some kind of import / export to and from previous versions I think we would all at least be operational again right now until Adobe can fix its errors in this new revision but they obviously didn't care to think about compatibility, safeguards for users and just adding more new features with a new file format in a buggy piece of software?
    I have wasted days now on trying to solve these problems following other users in this forums suggestions including the following listed below:
    • Reinstalled my OS downgrading to 10.9.3 originally thinking it was something OS related since I updated to 10.9.4 around the same time this all started happening
    • Uninstalled / reinstalled Premier Pro CC 2014
    • I have updated my permissions to read/write on my main user account on the Adobe Library files
    • I have updated my permission to read/write on my main user account on my overall drive
    • I have reverted my CUDA drivers back one revision as these were recently updated as well
    I AM TIRED AND FRUSTRATED WITH ALL OF THIS NONSENSE WHEN I JUST NEED TO EDIT SO CAN SOMEONE AT ADOBE PLEASE SHED SOME LIGHT ON ALL OF THIS AND GET ME BACK TO A PLACE WHERE I CAN USE THE SOFTWARE I PAY FOR AND NEED TO BE ABLE TO WORK WITH TO KEEP MY BUSINESS OPERATING AND COMPLETE THE WORK MY CLIENTS ARE WAITING FOR ???
    Originally I was very impressed with Adobe CC and Premier CC once I started to work with it after many years of abandoning the use of Premier as a Final Cut Pro 7 user but later decided to try Adobe again when Apple abandoned its pro base with the original Final Cut X. I also did not think this new cloud software model was all that bad over the old boxed method. This was all also before the big Final Cut Pro X update in December 2013/early 2014 where Apple appears to be back to support the real Pros but I have stuck with Adobe CC and Premier CC and been happy since that time. Now I am wondering if this was wise as I have had a number of other issues with other CC Apps, updates, etc and this is starting to feel like Creative Cloud is becoming a big, sloppy, buggy mess to me?

    Also...
    Add to right click menu of timelines an entry for "go to next keyframe" and "go to last keyframe" a la After Effects, we should also be able to assign a kb shortcut to this.
    There are buttons on either side of the create keyframe button to advance forward or backward in the effects control panel or timeline.
    You can also advance forward or backward in the effects control window by holding shift while dragging the playhead.
    Allow copy/paste of selection of audio/video effects, not just one at a time. Sure we can copy/paste attributes but since we can also copy/paste effects it would only make sense to allow to copy/paste a selection of effects.
    I guess I don't get this one. If I have 5 effects on a clip, I can simply command-click on the ones I want to copy over to the other clip.

Maybe you are looking for