Premier Pro Debug Event?

I am trying to open my project I've been working on the last four days. I'm getting this error message:
Premier Pro Debug Event
Premier Pro has encountered an error
{..\..\src\clip\MasterClip.cpp-2802]
Then when I hit continue it stops working, and I can't get into my project. I used Pluraeyes, and then I used NewBlue Color fixer last night. I've used them before and have not encountered a problem, but does this have anything to do with it. Please any suggestions, I cannot lose these four days of work?

Try this:
http://blogs.adobe.com/genesisproject/2011/02/premiere-pro-cs5-maintenance-two-great-tips. html
and then, restart, launch Premiere Pro, open a new project and then import your old project into it. If it works, then save it, try to clean out anything you don't need and hopefully that will help you.
Good luck,
Dennis

Similar Messages

Premiere Pro Debug Event - Premiere Pro has enconuntered an error.[..\..\src\TickTime.cpp-290]

Ho salvato un progetto Premiere Pro CC (2.2014) tre volte successive con i nomi: telecinema1.prproj, telecinema2.prproj e telecinema3.prproj. Tutto ha funzionato regolarmente e per fortuna ho esportato tutti i file e anche alcuni _copiati con Project Manager.
Ad un certo punto però quando ho cercato di riaprire il n.3 mi è uscito il seguente avviso: Premiere Pro Debug Event - Premiere Pro has enconuntered an error.[..\..\src\TickTime.cpp-290] con relativo crash.
Non mi sono preoccupato e ho provato ad aprire il n. 2, ma anche questo e poi anche il n. 1 mi hanno dato lo stesso problema.
Ho riscontrato che si tratta di un errore ricorrente, ma non ho trovato nessuna segnalazione con TickTime.cpp-290.
Cosa faccio? Grazie

How to repair projects that get a "TickTime.cpp-290" error after opening a specific project.

Premiere Pro Debug Event trackitemgroup

In Premiere Pro 5.5, I get a Premiere Pro Debug Event ending in "trackitemgroup.h-2" that crashes the program every time the project is opened. Premiere will open other projects/create new projects, and importing the sequence and media into a new folder will bring up the same error, but won't always cause a crash.
Thank you for any help

Thanks for the quick reply.
I basically did what you suggested, and didn't explain very clearly; created a new project file, imported the assets into that project, and then imported the original sequence. When I opened the original sequence (in the new project), all of the video showed up correctly, but I got the same error; the difference was, this time it didn't completely crash Premiere. I could just click OK and continue with the project (had to repeat that process a couple of times, but the project stayed open).
More details: this was a day-turn local news package, video shot on a Sony NX5U, reporter voice track recorded as a .wav file. This is the same workflow we've used for 6 months, and I've never run into this issue. Like I said, new projects with the same workflow are fine. I guess I could try playing each file in the timeline one at a time and see if one of them is having issues, but in the course of trying a few, they seem to be fine.

Pro Debug Event - Error 290 /tick time

Suddenly a project I was working (and all the auto-saved folders) could not open anymore by giving me the following message: "Pro Debug Event - error 290 tick time"

Whenever you enounter an error, as a general rule, search the forum to see if it's already been addressed, or to join the discussion:
TickTime.cpp-290 error after opening a specific project | Premiere CC 2014.2 | Windows 8.1
Also, I always convert/ingest my media to use the same format that runs natively in PPro and does not require conforming.
Second, with regards to losing work with projects that can't be fixed. I always save my projects incrementally to new names as I go. When I hit an issue that cannot be resolved (and occasionally I do), I reopen the previously saved project and try something else. In fact today I hit a stack error. It was a three-day edit, and I was on version "(project name)_028.prproj" I just opened up the previous version "..._027.prproj", repeated the few edits that I lost in "028" and rendered without error. Follow that?
Anyway, read the link above for a possible fix.

Getting Premiere Pro Debug Event message when trying to open project

I cannot open my project any more.
Last thing I did was saving, then exporting when Premiere pro CC crashed. Now I cannot open the file and also not all Adobe Premiere Pro Auto-Save files.
I used an AVI file exported from another Premiere project, 2 iPhone videos and an MP4 video from another mobile phone plus a WAV file for sound (home made music video).
Does anybody have an idea what I can do?
I deleted the files in C:\Users\...\AppData\Roaming\Adobe\Premiere Pro when Premiere didn't start.
The Debug Event appears everytime I start the project and when I start Premiere and open the project afterwards.

This is caused by an update to iCloud. More info here: Crash with keyframe.h-146 error when you open a saved project

PP CS6 "Premiere Pro Debug Event"

Hi,
i've got CS6 Production Premium with Plugins (Element 3D, RedGiant ColorSuit, Keying Suit, Trapcode, Universe)
Sinc today I have a Problem by opening a PP-Project:
I deleted the Cache. - no effect
I move the Common Plugins to a Backup-Folder - no effect
I reinstalled CS6 PP - no effect
I reinstalled CS6 PP and run the Adobe Cleaning Tool - no effect
I made a System Restore from my Windows 8.1 (4 weeks ago)
The last time I worked on a Project was one week ago - so the error could not be caused from the System
Who knows this "Debug Event"? What can I do?
This Error comes on all Projects when I open a Project work on it and press "Save". The next time I want to open it - the Error comes.
Pleas help me!
Jojo

OK
just saw that i'm not alone with this Problem...
Debug event f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe

PREMIERE PRO DEBUG EVENT Premiere pro has encountered an error. [c:\cloudroom\releases\2014.09\shared\adobe\mediacore\mediafoundation-.

potete darmi una mano a risolvere il problema?

Delete the Effect Presets and Custom Items.prfpset, which is stored in
C:\Users\<username>\Documents\Adobe\Premiere Pro\8.0\Profile-<username>
when succesfull make new project and iimport old one into new one.
Might need to reset current workspace and pull down the audiotracks first.

Premiere Pro Debug Event Error

When loading Adobe Premiere CS4 I get an error message.
"Premiere Pro has encountered an error.
[..\..\Src\ImporterProcessClient.cpp-127]"
I have windows 7 Proffesional 64bit operating system. And the CS4 student edition.

Thank you sir. Seeing that two Adobe experts suggested the same thing, I went ahead and sliced and diced, narrowing the sequence down to a single problematic .MOV file. I went to the original project, and replaced the file with the same video file and it worked! So the issue was a corrupt file link from it's folder to the Premiere project.
The problem is now solved!
Michael

Premiere Pro Debug Event Problem [HELP NEEDED]

Hello guys & fellas, hello staff!
Since a few hours I've got a huge problem starting premiere pro cc 2014!
Since the beginning I'm not able to load an existing or begin a new project anymore, which is very annoying, because of the fact that I am a youtuber and I have to edit videos to upload them. Now I have to make a break until the problem is solved.
Thank you very much for your help!
Best regards
Kevin

Hey there thank you for your quick answer!
I was looking for the data you were writing of, all I could find was this: (of course in german)
Which one do I delete?

Premiere Pro Debug event

Anyone seen this one?
...\..\Src\AudioRender\AudioPrefetch.cpp-84
Plays just fine, encodes just fine, but damned if you wanna touch that file -- instant crash.
everything else is working good, until oooh! we're in that sequence, touch the audio and DOOOOH! Crash!
This is a clean install of CS-3, right after a clean install of the O/S (WinXP) with nothing else involved.
opened a project I'd been working on, all the other 54 scenes appear to be playing friendly, and the audio files in question are part of clips used throughout the project (Repeatedly) it's just in this one instance they are going nutzoid.
Ideas?

I just ran into this problem, trying to figure ways around it.

Debug Event

As soon as I touch anything within the program I get the notification 'Premiere Pro Debug Event' with the error [..\..\src\AudioRender\AudioPrefetch.cpp-87]. Then the projgram shuts down. Am using Premiere Pro CS5 on a newer Windows 7 64 bit machine. Haven't had problems before. Tried clearing memory, reboot, import sequence into a new project... I have only a mix of 1920 px images and GoPro footage plus an mp3 as a sound track. Any help would be a ppreciated!

Ann -it didn't help... Same message appeared after I played sequence about 5 seconds...

Debug Event when importing HDV footage

In short:
When I try to import HDV footage into a project (.mpeg format),
I receive the following message:
Premiere Pro Debug Event
premiere pro has encountered an error.
[..\..\src\time.cpp-105]
Subsequently premiere fails to import the files...
I first noticed this problem last week, so I thought it might
be related to a product update. But even when uninstalling Premiere
Pro and re-installing it (thus being version 3.0) the problem
still exists. Updating to 3.2 doesn't solve the issue either.
Does anyone recognize this issue?
regards,
Reinout van Schie

Perhaps
this?
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Premier Pro Error: [..\..\Src\Video\VideoSegment.cpp-55]

I have been editing a project for three days now and last night as I was placing the "In" mark on a scene, I got a popup that said,"Premiere Pro Debug Event", "Premiere Pro has encountered an error", "[..\..\Src\Video\VideoSegment.cpp-55]".
I rebooted the machine and the error still occurs. No matter which scene I try and pull from the trim bin I get the error as soon as I mark a "In" spot on the scene.
I am using Premiere Pro CS3 ver. 3.2.0, running on Windows XP (will all updates), a Pentium Dual Core 2.66GHz, 4 Gig of RAM, NVIDIA GeForce 7600 GS Video Card.
I thought the scene from the bin was corrupted somehow but they all have the same problem.
Any Ideas???
Thanks,
Kameraman1

Process PID CPU Description Company Name
System Idle Process 0 97.66
Interrupts n/a 1.56 Hardware Interrupts
DPCs n/a Deferred Procedure Calls
System 4
smss.exe 560 Windows NT Session Manager Microsoft Corporation
csrss.exe 628 Client Server Runtime Process Microsoft Corporation
winlogon.exe 912 Windows NT Logon Application Microsoft Corporation
services.exe 956 Services and Controller app Microsoft Corporation
svchost.exe 1148 Generic Host Process for Win32 Services Microsoft Corporation
svchost.exe 1196 Generic Host Process for Win32 Services Microsoft Corporation
svchost.exe 1288 Generic Host Process for Win32 Services Microsoft Corporation
svchost.exe 1404 Generic Host Process for Win32 Services Microsoft Corporation
svchost.exe 1464 Generic Host Process for Win32 Services Microsoft Corporation
spoolsv.exe 1596 Spooler SubSystem App Microsoft Corporation
AppleMobileDeviceService.exe 1236 Apple Mobile Device Service Apple Inc.
mDNSResponder.exe 1248 Bonjour Service Apple Inc.
nvsvc32.exe 1392 NVIDIA Driver Helper Service, Version 175.19 NVIDIA Corporation
svchost.exe 1556 Generic Host Process for Win32 Services Microsoft Corporation
Tablet.exe 1824 WacomService Wacom Technology, Corp.
ULCDRSvr.exe 1980 ULCDRSvr Ulead Systems, Inc.
upsd.exe 2028 upsd Delta
WLService.exe 808 WLService GEMTEKS
WMP54GS.exe 1672 Wireless Network Monitor Cisco Linksys Corporation
iPodService.exe 2332 iPodService Module Apple Inc.
alg.exe 2576 Application Layer Gateway Service Microsoft Corporation
svchost.exe 2968 Generic Host Process for Win32 Services Microsoft Corporation
FNPLicensingService.exe 3616 Activation Licensing Service Acresso Software Inc.
lsass.exe 968 LSA Shell (Export Version) Microsoft Corporation
explorer.exe 1932 Windows Explorer Microsoft Corporation
AiNap.exe 136
realsched.exe 192 RealNetworks Scheduler RealNetworks, Inc.
rundll32.exe 200 Run a DLL as an App Microsoft Corporation
RTHDCPL.exe 212 Realtek HD Audio Control Panel Realtek Semiconductor Corp.
issch.exe 244 InstallShield Update Service Scheduler InstallShield Software Corporation
iTunesHelper.exe 812 iTunesHelper Module Apple Inc.
DVD43_Tray.exe 820
msmsgs.exe 836 Windows Messenger Microsoft Corporation
ctfmon.exe 844 CTF Loader Microsoft Corporation
MUPS.exe 880
TabUserW.exe 884 TABUSERW Wacom Technology, Corp.
jsm.exe 112 Settings Microsoft ???????
Adobe Premiere Pro.exe 1116
PhotoshopServer.exe 3368
procexp.exe 2912 0.78 Sysinternals Process Explorer Sysinternals - www.sysinternals.com
rundll32.exe 180 Run a DLL as an App Microsoft Corporation
aaCenter.exe 3352

Adobe Premier Pro CS3 Debug event

I have Preimeir Pro CS3 with a Debug Event error
..\..\Src\Audo\monitormixer.cpp-153
what is it, how do i fix it

Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used and your project and output settings

An error has occurred while opening the Premiere Pro CC 2014: Premiere Debug Event

An error has occurred while opening the Premiere Pro CC 2014: Premiere Debug Event
[c: \ cloudroom \ releases \ 2014.9 \ shared \ adobe \ mediacore \ mediafoundation\API\in
I don't know what to do, any help?

Delete the Effect Presets and Custom Items.prfpset, located in
C:\Users\<username>\Documents\Adobe\Premiere Pro\8.0\Profile-<username>
when succesfull make new project and import old one into new one.
Might need to reset current workspace and pull down the audiotracks first to reveal videotracks.

Premier Pro Debug Event?

Similar Messages

Maybe you are looking for