Premier pro failing after windows updates?

Hi all,
I have a windows workstation
i7 3639K chip
gigabyte X79 MOBO
NIVIDEA Quadro 4000 graphics card
32 GB ram
WD 2TB caviar green harddrive
I know the hard drive is not great but it was the best I could afford at the time.  So took computer to the shop for a power supply issue and the helpful tech has updated everything (service pack 1) [Usually I keep this machine offline and do not update when I have everything working- if it isnt broken dont fix it is my philosophy]
Premiere pro usually runs very very fast on this machine - I have been editing film quite happily without needing to render sequences first and have been getting very responsive performance from the timeline scrubber and preview window--- but now there is a long delay between moving the timeline scrubber and the preview window changing and also premiere pro is continually freezing when exporting (no error or anything - it just hangs on x% and does not go any further- when you try to cancel - then it starts "not responding" and eventually you have to crash the program to continue..[At the moment I am trying to edit and export short .png sequences from 3ds max]
I have updated Premiere pro 5.5 and tried to update graphics card to latest driver, but this has not fixed the issue,
Two questions-
1) what should I be doing to try to get Premier Pro back to working how it was?
2) any suggestions (adding an SSD or creating a RAID or changing settings?) to get better performance out of my machine (once I resolve my current issue)
Cheers all
sub

The only idea I have is to reinstall Windows from scratch, update it, then reinstall Adobe software and update that.
And leave it connected so the updates come regularly.  (They are there because something is broken, the update fixes it.)

Similar Messages

  • Intel HD Graphics driver on Yoga 2 Pro fails after Windows 10 upgrade

    Yoga 2 Pro. Everything working fine under Windows 8.1. Upgraded to Windows 10 RTM version. Intel HD Graphics device failed, message in Device Manager is "Windows has stopped this device because it has reported problems. (Code 43)". Installed the latest Windows 10 driver for Yoga 2 Pro from the Lenovo support site (driver dated 7/15/2015). This did not fix the problem. Interestingly, the first time I installed the driver from the support site (I tried it twice), I received a message stating "I already have a newer version of the driver installed". I chose to overwrite/install anyhow, as this was the supported driver from Lenovo. In addition, the Intel Graphics Control Panel (that installed with the driver) fails to come up as well. Is this a known problem? Is there anything else to try? How do I determine exactly which version of Intel HD Graphics I have (there seems to be many versions listed on Intel web site).

    cdsmith22 wrote:
    Update:  I've not had stability when using the Windows 8.1 driver on my Yoga 2 Pro running Windows 10.  The Intel HD Graphics Family driver shows "Working Properly" after first reverting back to the Windows 8.1 driver and the Micro-HDMI port works initially.  At some point though, I end up with the device showing disabled and I'm also having Audio issues.   I decided to upgrade the BIOS which went OK (upgraded from Kona BIOS Version 76CN31WW to Version 76CN43WW).  Then I re-installed the Windows 10 Intel HD Graphics Family driver from the Lenovo website (Version 10.18.15.2040 showing a data of 7/15/15 on the website but 6/16//15 once installed).  However, the driver shows disabled as not working properly so I'm not happy. I'll continue to consider purchasing a support option but figure it'll only reap an apology and perhaps some information confirming the problem but I expect paying for support won't result in a working Windows 10 driver any sooner.  I'm not aware how to report a problem like this to Lenovo without paying them to hear about the trouble they're causing me.Let me stop you from wasting your money.  I too had the problem you described.  What I made sure of was that once I installed that 8.1 driver, and in my case, the one dated March 2014, I went into Windows Update and disabled automatic updates.  That is where it kept getting updated for me.  That was a week ago and still have stability using the old driver. Hope this helps.  Intel needs to make a stable Windows 01 driver like yesterday. 

  • Premier pro crashing after latest update

    Hi, I got a notification in creative cloud app about a update for premiere pro CC . i updated and after that it is just closing on start up of the program. its been more than a day n adobe gives false promises about resolving it n giving me a call regarding the issue.
    I need help. how do i fix this?

    well i could tell you the premier version if it opened. the problem started after i updated.
    its premier cc
    i use photoshop as well as after effects n they are fine.
    os- win 7 x64 professional
    i7 3.1GHz
    geforce gt 610
    8gb ram
    technical help representatives are available for like two hours n they dont do anything helpful.
    its been two days and i'm losing my licsense.
    i think i will take legal actions or something.

  • Dell Latitude E6520 fails to boot after Windows Updates

    Hello, 
    I have a Dell Latitude E6520 that is not starting up after Windows updates. It installs updates and requests a reboot, after which it blue screens at the splash logo and reboots again. This goes on indefinitely. The only way to repair it is to boot from
    a recovery disk and run: 
    dism /image:D:\ /cleanup-image /revertpendingactions
    This is after running dism /image:D:\ /get-packages and noticing that several updates are still in an "Install_Pending" state. These are the kb's that are pending: 
    kb2982378
    kb2978742
    kb2977629
    kb2976897
    kb2973112
    kb2972211
    There were other updates, but those showed as installed. I would post the WindowsUpdate.Log, but I do not see a button to attach a file and the log is very long. Here is what I think is relevant towards the end of the log:
    2014-09-18 10:52:04:214
    496 540
    AU Install complete for all calls, reboot  needed
    2014-09-18 10:52:04:216
    496 540
    AU Successfully wrote event for AU health state:0
    2014-09-18 10:52:04:623
    496 8a4
    AU UpdateDownloadProperties: 0 download(s) are still in progress.
    2014-09-18 10:52:04:623
    496 8a4
    AU Triggering Offline detection (non-interactive)
    2014-09-18 10:52:04:623
    496 8a4
    AU AU setting pending client directive to 'Reboot Pending'
    2014-09-18 10:52:04:623
    496 8a4
    AU Changing existing AU client directive from 'Progress Ux' to 'Reboot Pending', session id = 0x1
    2014-09-18 10:52:04:625
    496 8a4
    AU Successfully wrote event for AU health state:0
    2014-09-18 10:52:04:625
    496 1668
    AU #############
    2014-09-18 10:52:04:625
    496 1668
    AU ## START ##  AU: Search for updates
    2014-09-18 10:52:04:625
    496 1668
    AU #########
    2014-09-18 10:52:04:626
    496 1668
    AU <<## SUBMITTED ## AU: Search for updates [CallId = {7C1069F1-2D57-421E-A378-38DE401BF9F1}]
    2014-09-18 10:52:04:626
    496 166c
    Agent *************
    2014-09-18 10:52:04:626
    496 166c
    Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-09-18 10:52:04:626
    496 166c
    Agent *********
    2014-09-18 10:52:04:626
    496 166c
    Agent  * Online = No; Ignore download priority = No
    2014-09-18 10:52:04:626
    496 166c
    Agent  * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
    and DeploymentAction='Uninstallation' and RebootRequired=1"
    2014-09-18 10:52:04:626
    496 166c
    Agent  * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2014-09-18 10:52:04:626
    496 166c
    Agent  * Search Scope = {Machine}
    2014-09-18 10:52:05:210
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:07:170
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:09:475
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:09:569
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:11:590
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:14:999
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:16:887
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:18:753
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:19:623
    496 1668
    Misc WARNING: IsSessionNonstandardUI: session 65536 is an unknown session type 0; treating it as a standard session
    2014-09-18 10:52:20:673
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:22:573
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:22:773
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:24:464
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:24:651
    496 1668
    AU AU received handle event
    2014-09-18 10:52:26:366
    496 166c
    Handler Using CBS interface ICbsSession7
    2014-09-18 10:52:27:520
    496 1668
    Shutdwn user declined update at shutdown
    2014-09-18 10:52:27:520
    496 1668
    AU Successfully wrote event for AU health state:0
    2014-09-18 10:52:27:520
    496 1668
    AU AU initiates service shutdown
    2014-09-18 10:52:27:520
    496 1668
    AU ###########  AU: Uninitializing Automatic Updates  ###########
    2014-09-18 10:52:28:206
    496 166c
    Agent  * WARNING: Exit code = 0x8024000B
    2014-09-18 10:52:28:206
    496 166c
    Agent *********
    2014-09-18 10:52:28:206
    496 166c
    Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2014-09-18 10:52:28:206
    496 166c
    Agent *************
    2014-09-18 10:52:28:206
    496 166c
    Agent WARNING: WU client failed Searching for update with error 0x8024000b
    2014-09-18 10:52:28:253
    496 1668
    Report REPORT EVENT: {62FF14E3-DDBE-4DDC-BE90-12B98EC74605}
    2014-09-18 10:52:04:216-0600 1
    193 102
    {00000000-0000-0000-0000-000000000000}
    0 0 AutomaticUpdates
    Success Content Install
    Restart Required: To complete the installation of the following updates, the computer must be restarted. Until this computer has been restarted, Windows cannot search for or download new updates:  - Security Update for Windows 7 for x64-based Systems
    (KB2982378) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2973112) - Security Update for Windows 7 for x64-based Systems (KB2976897) - Security Update for Windows 7 for x64-based Systems
    (KB2918614) - Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2977629) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972211) - Security Update
    for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2937610) - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2894844) - Security Update
    for Windows 7 for x64-based Systems (KB2978742)
    2014-09-18 10:52:28:253
    496 1668
    Report CWERReporter finishing event handling. (00000000)
    2014-09-18 10:52:28:253
    496 1668
    Report CWERReporter finishing event handling. (00000000)
    2014-09-18 10:52:28:425
    496 1668
    Service *********
    2014-09-18 10:52:28:425
    496 1668
    Service **  END  **  Service: Service exit [Exit code = 0x240001]
    2014-09-18 10:52:28:425
    496 1668
    Service *************
    Please let me know if there is a better way of attaching the log to this post and thank you in advance for any help.

    Hi ChristianBoman,
    We could use the OneDrive to upload the log and then paste the shared link here. For more information, please refer to the following article.
    http://windows.microsoft.com/en-us/onedrive/share-file-folder
    for the update error 0x8024000b,  please refer to the following article.
    http://windows.microsoft.com/en-us/windows/windows-update-error-8024000b#1TC=windows-7
    Please take the following steps:
    1. Run the Windows Update Troubleshooter.
    2. Click the Start button , type Run in the search box, and then, in the results list, click Run.
    3. Copy the following text, and then paste it into the Run text box:
    Cmd /c ren %systemroot%\System32\Spupdsvc.exe Spupdsvc.old
    4. Click OK.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • I try download for premier pro and after affects but says page not found what happens?

    I try download for premier pro and after affects but says page not found what happens?

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • SP 2010 - Getting "An unexpected error has occurred. " message when accessing Sharepoint site after windows update - Windows 7 Home Premium

    Hi,
    I am new to SP 2010. I have installed Share point 2010 server (trial version) on my Windows 7 Home Premium Laptop by following the below link.
    http://msdn.microsoft.com/en-us/library/ee554869%28office.14%29.aspx
    Everything went fine and was able to see the new sharepoint site after completing configuration wizard. SP2010 Central Admin also worked fine.
    However, after windows update, sharepoint site is not working. I was able to see the site working for more than a day before windows update. SP2010 Central Admin is still working. Executed "PSCONFIG" after
    update but still no good.
    I saw a warning "The Security Token Service is not available" in Central Admin and did some research to fix the issue but nothing worked. 
    Hotfix
    I believe I have all hotfixes mentioned in the forums. Here is the list.
    Windows6.1-KB976462-v2-x64
    Windows6.1-KB982307-x64
    Synchronization
    Windows6.1-KB974405-x64
    MSChart
    SQLSERVER2008_ASADOMD10
    381569_intl_x64_zip
    Windows6.1-KB976462-v2-x64
    Event Viewer
     I can see following log in Event Viewer when accessing site home page.
    Event ID:      8306
    Task Category: Claims Authentication
    Level:         Error
    Website response
    http://localhost:32843/ - "HTTP Error 503. The service is unavailable." 
    http://localhost:32843/Topology/Topology.svc - Works fine
    http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc - Returns following error. I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security) and IIS website (SharePoint Web Services
    -> IIS -> Authentication).
    HTTP Error 500.0 - Internal Server Error
       Module "WindowsAuthenticationModule" could not be found
    I even tried to uninstall Sharepoint and re-install the same. It worked even second time until it went thro' windows update. App pools are running and Websites are up and running in IIS.
    Can anyone please help me to fix this issue? 
    Thanks

    Hi Henrik,
    Here is the log info.
      <EventID>8306</EventID> 
      <Version>14</Version> 
      <Level>2</Level> 
      <Task>47</Task> 
      <Opcode>0</Opcode> 
      <Keywords>0x4000000000000000</Keywords> 
      <Execution ProcessID="8436" ThreadID="8812" /> 
      <Channel>Application</Channel> 
      <Security UserID="S-1-5-20" /> 
    The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+msbin1). If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024
    bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>IIS 7.5 Detailed Error - 500.0 - Internal
    Server Error</title> <style type="text/css"> <!-- body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} .config_source code{font-size:.8em;color:#000000;}
    pre{margin:0;font-size:1.4em;word-wrap:break-word;} ul,ol{margin:10px 0 10px 40px;} ul.first,ol.first{margin-top:5px;} fieldset{padding:0 15px 10px 15px;} .summary-container fieldset{padding-bottom:5px;margin-top:4px;} legend.no-expand-all{padding:2px 15px
    4px 10px;margin:0 0 0 -12px;} legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;f'.
    I would like to let you know that I am getting following message when accessing the below link.  I am unable to see windows authentication in both Windows Features (under IIS -> WWW services -> Security)
    and IIS website (SharePoint Web Services -> IIS -> Authentication).
    http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc
    HTTP Error 500.0 - Internal Server Error
       Module "WindowsAuthenticationModule" could not be found
    Regards

  • My iPhone5 no longer detects my HP OfficeJet Pro 8600 Pro ePrinter after I updated to IOS7

    My iPhone5 no longer detects my HP OfficeJet Pro 8600 Pro ePrinter after I updated to IOS7. Is anyone else experiencing this? I was able to print from my iPhone up until I updated to IOS7.  Is there a fix for this?  Thanks!

    I hit the blue arrow on bottom of page, selected print, hit select printer, hit office jet 8600, then print.  Before update I only had to select printer once and it would remember it. Now I have to select each time. Try turning your phone off, unplugging and then plugging in again your printer. Wait until it is completely on and then turn your phone on and see if you can select it. Hope this helps

  • When douwnloading adobe premier pro fails. Writes that the installation is complete, some optional components are not installed correctly. What to do?

    When downloading Adobe Premier pro fails, write that the installation is complete, some optional components are not installed correctly. What to do?

    check your install logs for the problem, http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

  • Where can I download Color Finesse and how I can install them with Premier Pro or After Affect ?

    I recently purchased master collection 5 DVD version. On DVD box I have three serial numbers: Master collection, Ppro/AE CS4 32 Bit and Color Finesse. I used Master collection serial to activate my product. I am having 64 bit os, so I did not use Ppro/AE CS4 32 Bit serial.  My question is about Color Finesse  Serial. I searched about it and found it as an Plug-in for Premiere Pro or After Affect. Now where can I download Color Finesse and how I can install them with Premier Pro or After Affect?

    This serial is only required for the CS4 version. The CS5 version does not require an extra serial. Both versions are installed automatically with the main programs. Nothing more to do.
    Mylenium

  • Hello, I am editing my final project at university on Premier Pro CC on mac, but when I try to load my project in Premier Pro CC for windows on my home pc I get  "codec missing or unavailable".

    Hello, I am editing my final project at university on Premier Pro CC on mac, but when I try to load my project in Premier Pro CC for windows on my home pc i get  "codec missing or unavailable". Something to do with Apples' ProRes 422 LT codec. Is there a way round this problem?

    I just went to the Miraizon site, who has been the sole licensee of ProRes for PC, to see if their $150/license download was still at that price.
    This is what I found ...
    They only sell a few of their other products, and the ProRes/DNxHD codec package only generates an email form to "support".
    I'm afraid you'll have to transcode those files to something like DNxHD or an avi codec or something to work them via PC. And I'd thought about purchasing that codec pack from them but kept putting it off. Now, I wish I'd bought it. Ah well.
    Neil

  • Windows Update Error 800B0109 after Windows Update Agent 7.6.7600.320 Installed

    Hi, I have this error message when running windows update, it happened after Windows Update Agent 7.6.7600.320 installed.
    Any idea how to resolve this?
    Thank you.

    Hi，
    Please make sure that your antivirus application does not scan the files in the
    %windir% \SoftwareDistribution directory on any computer on which Windows Update Agent is installed.
    You can also temporarily turn off the antivirus application and check the result.
    Or run the following commands, and press Enter after each command:
    Net stop wuauserv
    cd %systemroot%
    Ren SoftwareDistribution SoftwareDistribution.old
    Net start wuauserv
    Try to install updates again.
    Yolanda Zhu
    TechNet Community Support
    I tried the commands as well, still prompting the same error.
    Thanks

  • SOLVED Key board and mouse fail after last update

    Both my wireless keyboard and mouse failed after I updated yesterday. I'm using KNOPPIX to post they both work with knoppix so its not a hardware problem.
    KDE 4.1
    Logitech keyboard and mouse
    Last edited by normc (2008-11-08 00:05:37)

    Thanks a lot
    Just want to add that I had to edit grub at start up and add "single" at the end of the kernel line.
    The reason is that switching to runlevel 3 didn't work for me.

  • Profiles being reset after windows updates?

    Hi All
    I'm having issues with Outlook 2013 SP1 resetting our users profiles after Windows Updates have been applied. Their profiles are being reset whilst their previous profiles are being renamed to "BACKUP of <profile name>".
    Office 2013 x86 has been deployed via VL Media onto Win7 x64 machines and we are distributing the ImportPRF registry key via GPO (set to Update) in order to customise the profiles on first run. (basic email account and attaching a default PST file)
    It appears that after windows updates are applied outlook is triggering the first run process again and therefore resetting the users profiles back to the standard set in our PRF.
    We used this method to configure Outlook 2010 and for the years of deploying Office 2010 we never had any issues. Can anyone suggest what might be going on here or what might have changed in Office 2013?
    Thanks

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Firefox won't start after windows update

    After windows Updated my computer Firefox won't start. I tried a clean reinstall two times, won't work. When I tried to start the firefox the first time after booting my computer it comes with the following message.
    XML Parsing Error: undefined entity
    Location: chrome://mozapps/content/extensions/update.xul
    Line Number 14, Column 1:
    <wizard id="updateWizard"
    ^
    Any Help would be greatly appreciated. I like firefox and I'm using it the last 7 Years.
    Thanks
    DK

    I cheated a little bit and put the issue url in a working version of firefox:
    chrome://mozapps/content/extensions/update.xul
    What I got was a page that looked like this below and console:
    blah blah parser:
    <pre><nowiki> xml-stylesheet
    xml-stylesheet
    <wizard id="updateWizard" xmlns="http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul" title="Firefox Update" windowtype="Addons:Compatibility" branded="true" onload="gUpdateWizard.init();" onwizardfinish="gUpdateWizard.onWizardFinish();" onwizardcancel="return gUpdateWizard.onWizardCancel();" onclose="return gUpdateWizard.onWizardClose(event);" buttons="accept,cancel" pagestep="1" currentpageid="dummy" firstpage="true" lastpage="true">
    <script type="application/javascript" src="chrome://mozapps/content/extensions/update.js"></script>
    <stringbundleset id="updateSet">
    <stringbundle id="brandStrings" src="chrome://branding/locale/brand.properties"></stringbundle>
    <stringbundle id="updateStrings" src="chrome://mozapps/locale/extensions/update.properties"></stringbundle>
    </stringbundleset>
    <wizardpage id="dummy" pageid="dummy"></wizardpage>
    <wizardpage id="offline" pageid="offline" next="versioninfo" label="Firefox is working offline" onpageadvanced="return gOfflinePage.onPageAdvanced();">
    <description></description>
    <checkbox id="toggleOffline" checked="true" label="Go online now." accesskey="G" oncommand="gOfflinePage.toggleOffline();"></checkbox>
    </wizardpage>
    <wizardpage id="versioninfo" pageid="versioninfo" next="mismatch" label="Checking Compatibility of Add-ons" onpageshow="gVersionInfoPage.onPageShow();">
    <label>
    Checking your add-ons for compatibility with this
    </label>
    <separator class="thin"></separator>
    <progressmeter id="versioninfo.progress" mode="undetermined"></progressmeter>
    <hbox align="center">
    <image id="versioninfo.throbber" class="throbber"></image>
    <label id="versioninfo.status" flex="1" crop="right"></label>
    </hbox>
    <separator></separator>
    </wizardpage>
    <wizardpage id="mismatch" pageid="mismatch" next="checking" label="Incompatible Add-ons" onpageshow="gMismatchPage.onPageShow();">
    <label></label>
    <separator class="thin"></separator>
    <listbox id="mismatch.incompatible" flex="1"></listbox>
    <separator class="thin"></separator>
    <label>
    Firefox can check if there are compatible versions…
    </label>
    </wizardpage>
    <wizardpage id="checking" pageid="checking" next="noupdates" label="Checking for Compatible Add-ons" onpageshow="gUpdatePage.onPageShow();">
    <label></label>
    <separator class="thin"></separator>
    <progressmeter id="checking.progress"></progressmeter>
    <hbox align="center"></hbox>
    </wizardpage>
    <wizardpage id="noupdates" pageid="noupdates" label="No Compatible Add-ons Found" onpageshow="gNoUpdatesPage.onPageShow();">
    <description></description>
    <separator class="thin"></separator>
    <hbox id="updateCheckErrorNotFound" class="alertBox" hidden="true" align="top"></hbox>
    <separator class="thin"></separator>
    <description id="noupdatesCheckEnabled" hidden="true"></description>
    <vbox id="noupdatesCheckDisabled" hidden="true"></vbox>
    <separator flex="1"></separator>
    <label></label>
    <separator class="thin"></separator>
    </wizardpage>
    </nowiki></pre>
    I do not see much about coloum 14, but I am guessing this file is stored somewhere and its corrupt. Update.xul suggests that it is the update file. Do you still have this in your downloads folder? There are two places for update and for a clean reinstall:
    [http://www.mozilla.org/en-US/firefox/new/] in a private window will give you a new install or you can choose from here: [https://www.mozilla.org/en-US/firefox/all/]
    This is what the file should look like; [http://hg.mozilla.org/mozilla-central/log/7a2edc5171e6/toolkit/mozapps/extensions/content/update.xul] If you can copy and paste that file from a working browser we can see the issue, but it will just look the same as the error.
    if you can replace the contents of the file locally with what it should look like it will fix the error, but who knows if there are other errors. May be best to delete the updater and save all the profile folder contents.

  • I want to backup my pinned tabs and my bookmarks as they have been lost several times after windows updates

    several times after system crashes and sometimes after windows updates my pinned tabs have disappeared. How can I back up the pinned tabs and bookmarks??

    Firefox stores the bookmarks and the browsing history in the places.sqlite database file..
    There are 10 rotating daily JSON backups (bookmarks-####-##-##.json) in the bookmarkbackups folder within the Firefox profile folder, one for each day that Firefox is started.
    *http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
    Pinned (App) tabs and tab groups are stored in the sessionstore.js file.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    See also:
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile

Maybe you are looking for