Premier Pro, sequence audio/video mis-linked

Does anyone know why my video and audio are automaticall un-linking? Does this have something to do with the "toggle Sync lock"? I just noticed that it was unchecked. images attached.
Not sure what this would matter... if you insert and asset with audio... it should alway be linked, right?
I'd would very apprecient your input.
Thanks,
John Q.

According to your screen shot, the Video and Audio of your clips are all still linked. This is visible in the underlining of the clips' names. Unlinked clips don't have the underline.

Similar Messages

No audio on Adobe Premier pro for some video

I have recorded a series of videos as an .MTS format and imported them on my computer. Some of the videos use audio from the onboard camera mic and some interview footage use a clip-on audio mic. When I play back the videos on premier pro cc, the onboard mic recordings are fine--but I hear nothing from the videos where I used the clip on mic. (the videos with the clip-on mic are in mono)
For the videos I recorded with the mono mic:
-I can clearly see levels that indicate audio is there.
-When I play back the video on the camera, the audio is also there, clear as day.
-For some reason, there is no audio when the computer plays back, even when I use VLC.
I searched on-line, but there does not to be much info on my specific issue. Can you suggest anything?

Try this - I had the same problem and it worked for me. Can you see waveforms in the suspect audio track in the Premiere timeline? If so, it's there and it's just a playback issue which could be a couple of things. Eg,
- you won't hear audio if Premiere is still generating peak files (to check if this is your problem, check in the bottom right hand of the corner and you'll see a little yellow bar progressing and a message saying 'generating peak audio'). This can take several hours or even over night for a big project, eg with lots of Red .r3d media.
- another reason is if the audio can't be played back without rendering. Is the playback bar at the top of the timeline yellow, green or red? If green, this could be your issue. When you go to the go to the sequence menu and go to select 'render audio' is it greyed out? If so, you need to select the 'render audio' box in the 'general' tab of the 'preferences' pane from the menu. Then render your audio and you should be fine to play back. Does this help?

Problem importing premier pro sequence. please help

I have been attempting for awhile now to import a 45 min long rendered sequence from premier pro into encore but whenever i do so, the second the sequence is imported, the program stops responding.
how can i fix this?

Can you please give your system specs?
In particular, how many physical HDD you have as well as memory. OS, CPU etc.
Also - what are the scratch disc settings in Premiere?
Finally - what is the video type - SD? HD?
Please give as many details as possible as it sounds like your system is going into overdrive.

Cant open Premier Pro-Asking for video driver update?

I have recently installed Adobe premier Pro and it comes up with the following message "Adobe Premier Pro could not find any capable play video modules.Please update your video display modules and start again"
I run Windows 7 and have a top of the range laptop which should easily be able to cope with the video output
Would really appreciate some help on this
Thank you
Andy

>top of the range laptop
Need exact brand and model... including the screen size in pixel X pixel dimensions
Also need exact brand and model of graphics adapter (ATI or nVidia or ???) and exact device driver number
To find the nVidia driver version
Right click in any open area of the Windows desktop
Select NVIDIA Control Panel from the popup window
Select SYSTEM INFORMATION at the lower left corner
Driver version should be the 1st line in Details
If your laptop has dual video (power saver and regular) read...
Dual video laptop problems
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
And, for the future, please remember that nobody here can look through the Internet to see what you have
More information needed for someone to help... please click these links and provide the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406

Getting random white noise in Premier Pro CS3 audio

I'm working with Premier Pro CS3 on a simple 15 minute slide show with approx. 150 pictures and 3 songs in WAV format. In each of the three songs, I'm getting 1-second bursts of white noise - on left or right or both channels - approx. 3-4 times in each song. When played outside of Premier Pro, all songs are clean with no white noise. None of the songs are too 'hot'; show three have good levels in Soundbooth. I've scanned all of the audio sections in Help and can find nothing that might explain the cause and I'd appreciate some guidance. I've worked with previous versions of Premier Pro for years and have never run into this. Thanks.

Have you updated your Creative driver? That would be one of the first things that I would do.
Next, in Soundbooth, do you see the noise in the Waveform? In PrPro, when you zoom in both vertically and horizontally on the Audio Track, do you see it in the Waveform?
Some folk have had great luck using ASIO4ALL as their ASIO driver. It has cleared up many issues with a broad range of equipment. I do not recall your exact problem, but then I might have missed that one. Note: after you download and install ASIO4ALL, you'll need to go to Audio Hardware and set it as your Input and Output. This driver has been very helpful on the Audition forum, and with all sorts of issues and some very esoteric hardware.
Hope that something helps, and good luck,
Hunt

Why is my sequence audio losing the link to video?

I right click the video and the stereo files and they say they are linked, but every time I move the video the audio stays put.

Click the icon to the right of the magnet under the sequence timecode.

Premier Pro CS3 audio playback problems

Hi
Could someone please help with this. I have captured film on a DV tape shot on a Canon XH A1. The sound played very well when on the camcorder, however won't playback on PP even though the wave form is visible. I have doen loads of checks, sound is enabled, have loaded software agian and captured many times. Alos tried capturing audio alone and while the wave forms were visible, I could not hear the audio. PP is OK with sound captured from other DV tapes. The DV tape is not the problem because it has other clips on it which were fine in PP.
This is really important for my work - any advise would be appreciated.

If memory serves, Canons are capable of recording to audio tracks 3 & 4 on DV, which Premiere isn't able to capture. It's the only explanation I can think of for the observed phenomena. Scenalyzer is able to capture these audio tracks, though.

Encore having trouble loading my sequence from Premier Pro CC.

I have made DVD's before with Premier Pro CC and Encore, but today it is stalling when I try to import my timeline from PPCC. It says," Import Premier Pro Sequence. Loading." It will stay on this for hours not moving. Is Something wrong with my Encore? Is something wrong with my sequence?

You can't import a sequence from Premiere CC to Encore CS6, you have to export the video out of Premiere as a Mpeg2dvd and import the two files, one audio and one video, into Encore. Encore CS6 is the last of the Encore releases and will not directly link to any of the CC programs.

Premier Pro CS4 having trouble with HDV video

Recently I had a video shot with an HD camera and use the HDV codec. I couldnt even open these files in Adobe Premier - until someone was able to install Final Cut Pro on the computer (assumin FCP came with some sort of codec). I just dont know how to use final cut pro - but that program seems to have no problems with this video file.
So im trying to edit it using Premier PRO - but the video is very delayed - almost in slow motion. Does anyone know what i can do? I really need to make some simple edits to this video and then render it out as an FLV - i dont have time to learn final cut pro before this needs to be done.
Any information or tips would be greatly appreciated.
Thanks,
amanda

Amanda,
It would appear that you are on a Mac. I'm not sure if G-Spot will run on a Mac, unless you also have some form of Windows system on it, i.e. Bootcamp, or similar. You might get info on this from the G-Spot site.
If it will not run, you'll be missing a wonderful tool. Instead, open QuickTime Player. Load one of these files. Hit Ctrl-j (Command-j on the Mac, I think) to get to the Properties screen. Look there to find out the CODEC's used in these files. Let us know about them. I do not know FCP, but it probably has a built-in Properties utility, that might yield more and better info on the files, that QT Player will. Would be worth a look and a try.
You are probably correct that it's a CODEC issue and that FCP has access to the proper one. It could well be that PrPro cannot even use that one, but until we find out what it is, we'll not know.
BTW, what make and model of camera?
Good luck,
Hunt

Problems importing Sony Handycam mpg files into Premier Pro CS4

I'm investigating Premier Pro CS4 for video editing and if I can make it work okay then I will purchase the Master Collection. Otherwise I may go to the MAC and use Final Cut. I need immediately to edit files downloaded from a Sony HandyCam that come off in an mpg format I believe it is (MPEG-2). My understanding is that the Premier Pro supports the importing of mpg files.
When I attempt to import one of theses mpg files I get the error, "Unsupported file format or damaged file." I know the files are okay because I can play them with Windows Media Player and have been able to edit them with Window Movie Maker. Now I need a more robust editing environment and am looking at Premier Pro to be the solutions.
Has anyone had experience with importing mpg files? Is there a Codec needed? If so where can I get it and how do I install it?

Adobe wouldn't help me on the phone, as I haven't got a support contract. Perfectly rational by them, just stupid.
I've asked my software supplier to forward on some questions and a link to this thread to Adobe support and they should be looking at it soon.
Also, there is another possible solution that might help those of you with full versions.
There is some advice here on one way to give Premiere Pro the ability to import MPEGs.
http://www.mediacollege.com/adobe/premiere/pro/import/mpeg-ac3.html
This is very attractive to me - as I know the AC3 audio codec is used by my MPEG files and it sounds like it could be a solution. Of course, I've tried it, and I still get the same error.
I ran the files through TSRemux and got the same 'file format not supported' error message.
I've also been trying to import a .mov file into the trial version and I get the same error. Jim, would you be able to help me by saying in which other ways the trial version is limited?

Constantly get "unhandled win32 exception occurred in Adobe Premire Pro.exe [1048]" in Premier Pro CC v8.1 Caravan

I originally downloaded the trial version for evaluation two days ago and everything was working fine. As of yesterday the program is crashing constantly (every 5 - 10 minutes) when I am editing videos with MP3 sound and mpg video files. It crashes while I am trying to edit and insert Title text in the video sequence containing the song lyrics.
This makes this program unusable for my purposes unless I can find a solution for this problem. I had planned to buy it and PS CC 2014 as well until this started.
I am running Windows 7 Professional 64 bit with Service Pack 1 on a Dell Vostro 3560 with 8GB memory.
System Error Log shows:
EventData:
Adobe Premiere Pro.exe
8.2.0.65
5486db4a
VideoFilterHost.dll
8.2.0.65
5486bf85
000000000006d692
2234
01d074d0fe54f0e9
C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\Adobe Premiere
C:\Program Files\Adobe\Adobe Premiere Pro CC 2014\VideoFilterHost.dll
f800a97e-e0c5-11e4-a943-c4ec3514e91f
Has anyone encountered this problem and found a solution for it?
Adobe support is useless.
Message was edited by: Michael Scott
Thank-you for your response. I will review it ASAP.

Zooropa75
Thanks for chiming in.
Before today I was unaware of the issue as it had not presented itself as an issue to me.
I tried (because you suggested it) dragging a sequence into a pre-opened AME window. All that happend was the sequence window detached itself from the main Premier window.
After restoring the window - I went to the now opened AME and used File>Add Premier Pro Sequence and it all ran smooth as silk...
Thanks for the tip... Even though I couldn't identify the "drag" route I got the import sequence nailed.
I still look forward to this being resolved as the original flavour is the one I like best.
Thanks
Dave

After effects and Premier pro corrupted after dynamiclinkserver crash CS6

Hi guys,
The title says it all really.
I was trying to render an after effects file in CS6
I opened Premier Pro and created a dynamic link. this crashed after a while and both programs now fail to start up.
I have tried most of the suggested fixes to no avail.
For information: I also have CC installed and it runs fine. If i log in as another user with a clean profile then they run fine. So im guessing its a common user based issue.
premier pro just stops working on launch
After effects freezes on the mediacore loading. It then gives a message saying Quicktime is not installed on this computer (It is). If i click okay it then proceeds to crash with a dialogue box which refers to the dynamiclinkserve.exe
Becasue it seems to be profile based im thinking a reinstall wont make any difference here.
All help greatly appreciated
all the best
chris

FIXED!
if you have this issue the best way to see if the dynamiclink server is in a crash loop. It will intermittently freeze your machine. On the task manager you will see it starting and quitting.
see http://forums.adobe.com/message/3196845#3196845
post 15. Solved it for me (the prefs in dynamiclinkmanager)
cheers
chris

When I try to import video clips into Premier Pro 6 the audio and video aren't synced.

When I try to import video clips into Premier Pro 6 the audio and video aren't synced. I can moved both of them around without the other. This creates a lot more work. I have looked on forums etc but can't find the answer Can you please help.

More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
-and Source Patching http://forums.adobe.com/thread/1442800?tstart=0
Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
https://forums.adobe.com/thread/1070933 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

My video has no sound but i want to add the audio using premier pro

My video has no sound but i want to add the audio using premier pro.
when I want to import the file,it said:your video file has no audio.
But i want to add the sound to my video!!
Does anyone know how to solve this problem??

So you have a video (.mov) that some how you got from Flash.
It has no sound on it.
Does the .mov import into Premiere?
If it does..you edit it in the timeline (sequence) and add audio to the audio track(s) before exporting it.

Import AVCHD video footage into Premier Pro CS6 - MAC - AUDIO MISSING!

Hi,
Ive been attempting to import AVCHD video footage captured on a Panasonic into Premier Pro CS6 on my MacPro. I've tried this from the camera and after copying the entire folder to my desktop. The footage is there, but has no audio! I have read loads, forums, advice, YouTube vids and Adobe manuals, trouble shooting and help, but found no simple answer to this simple issue.
Any help would be appreciated.

Thanks too Jeff. Sandeep's post is a simple redirect to a post on Adobe which naturally I've already read before turning to the forum. The link then sends you to another link! Info. is too light on specifics, doesn't help! I have 6.0.5 as downloaded from Adobe... no joy! All remains the same, picture but still no audio! Maybe a compatibility issue with Panasonic's HC X900... but Panasonic's website is as light on info. as Adobe. I'm off to the shop to buy FCP or Avid.

Premier Pro, sequence audio/video mis-linked

Similar Messages

Maybe you are looking for