Premier Pro shut down

Hello, big problem With premier Pro CC. Today When I try to open a project than usually I work with, Premier pro CC shut down immediatly.
What's up ?
Thank you to your support.
Laurent.

See reply #1 at http://forums.adobe.com/thread/1405632?tstart=0

Similar Messages

  • Premier Pro shuts down the second I mouse over the preview of an asset. Whats wrong?

    I am new to Premier Pro and am using a Mac Book Air with Windows installed.
    As soon as I create a new project and import the assets (the "Eagles Documentary" example), the whole thing shuts down when I mouse over the assets to see them move.
    Any ideas???

    Please provide the system info and other data points requested here: FAQ: What information should I provide when asking a question on this forum?

  • Premier Pro Shuts Down when trying to EXPORT

    I am a new editor, only at it for a couple month now. The problem I have is when I attempt to export, Adobe closes without warning.
    I have exported in the past, what I do is, set a work area or just highlight a clip, go to FILE: EXPORT: ADOBE MEDIA ENCODER. I have had no problems until a couple days ago. Now when I click ADOBE MEDIA ENCODER the program closes completely and shuts down.
    I am using a MATROX RTX2 and the same thing happens when I try to export using MATROX MEDIA ENCODER.
    I can however export just using MOVIE but it looks like crap and I am using HDV..
    Help?? Suggestions?

    Thanks, I'll have to give that a try if there isn't an easier answer out there somewhere. If I pull the card will I have to reload the software and drivers?
    If my project is saved and I have a copy of the project saved will I be able to reload Adobe without losing anything? What I mean is will I be able to just import my whole project once reloaded?
    I just don't understand what could have happened, since I was doing this with no problem a couple of days ago.
    Thanks for your help, it's greatly appreciated.
    Tim

  • My girlfriends Macbook Pro shuts down at the Apple Logo....

    My girlfriends Macbook Pro shuts down at the Apple Logo....
    1)I start the computer
    2)It loads to the apple logo
    3)A progress bar shows and loads about 5% then it dissappears and a few seconds later the macbook pro shuts down.
    Any solutions?
    If not, is there any way for me to reinstall the os without losing any files such as(any of her pictures, music, etc)?

    Hi S,
    See if you can run Repair Disk: Boot frominstall disc (insert disc > restart > immediately hold down c key andkeep holding it until you see “Preparing Installation”) > at first screenselect the language and click Continue > click on the Utilities Menu in themenu bar > open Disk Utility > select your HD in the panel on the leftside> click Repair Disk at bottom of main window. Run this at least twice,and keep running it until it says “appears ok” twice in a row. If that doesn’thappen, you may need a stronger utility such as DiskWarrior or if the directoryis damaged beyond repair, you may need to reinstall the OS, or you may have a damagedHD (repair utilities can only repair the directory structure, not the HDitself). When this is finished, quit Disk Utility, quit the installer, andrestart. Once booted normally, go to Applications > Utilities > DiskUtility and run Repair Permissions.

  • Soundtrack Pro Shuts down when trying to fix analized Action

    Soundtrack Pro Shuts down when trying to fix analized Action

    Thanks, I'll have to give that a try if there isn't an easier answer out there somewhere. If I pull the card will I have to reload the software and drivers?
    If my project is saved and I have a copy of the project saved will I be able to reload Adobe without losing anything? What I mean is will I be able to just import my whole project once reloaded?
    I just don't understand what could have happened, since I was doing this with no problem a couple of days ago.
    Thanks for your help, it's greatly appreciated.
    Tim

  • Macbook Pro shutting down. Hardware error code 4MEM/62/40000000:0x7f537f90

    Macbook Pro shutting down. Not the same action making it shutdown. Anywhere from being online to attaching a photo to an email to working in Word or Photoshop. Even after it's closed and not being used. I come back to it being shut off and saying it had to restart because of a problem. I ran the Hardware check and got the Hardware error code 4MEM/62/40000000:0x7f537f90.
    I must say I am quite disappointed. I have used Mac for work but had a PC since day one, and I JUST got this Macbook Pro in Dec. I was delighted that Mac usually didn't have as many problems with viruses etc as PC. And now last couple days, constantly shutting itself down. The closest store to me is a few hrs away. I am in South Dakota, store is in Minnesota Any help would be appreciated.

    Can you post a screen shot of About This Mac -> (More Info) -> System Report -> Memory and click on each DIMM and post the bottom right pane. You can also do the same without a screen shot using just text version using the following highlighted command in OSX Terminal. The output is also listed.
    system_profiler SPMemoryDataType
    Memory:
        Memory Slots:
          ECC: Disabled
          Upgradeable Memory: No
            BANK 0/DIMM0:
              Size: 8 GB
              Type: DDR3
              Speed: 1600 MHz
              Status: OK
              Manufacturer: 0x02FE
              Part Number: -
              Serial Number: -
            BANK 1/DIMM0:
              Size: 8 GB
              Type: DDR3
              Speed: 1600 MHz
              Status: OK
              Manufacturer: 0x02FE
              Part Number: -
              Serial Number: -

  • My 15" Macbook Pro, shuts down by it self (Random occurrence).

    My 15" Macbook Pro, shuts down (randomly) by it self, some times it will not turn on, and some other times (very rarely) the fans go on “very loudly” the second I turn it on. But the computer, does not turn on at all, even with the battery fully charged and the fans runing full blast.
    Some other times, it will not wake up. It will only turn on or wake up if connected to the power adapter, even if the battery is fully charged.
    I have already reset (a couple times) de firmware, the smc and he pmu and the problem persists.
    Al this goes on randomly and unpredictably. Some times it works just fine for 4 or 5 days and the suddenly something happens.
    I also think that some times the computer runs extremely hot.
    PLEASE HELP!!!!!!
    [email protected]
    15' MacBook Pro   Mac OS X (10.4.8)  

    I have the same thing happening with a new macbook I bought my wife and I called apple today and after going back and forth between apple care and apple customer service they are shipping me out a new replacement macbook as it is less than 30 days since I bought it. I am waiting for their email with the Fed ex info so I can send this one back and then they will send out the new one.
    If it is still in warranty I suggest you call Apple customer service and let them know how bad it is and insist on a new one!
    This one also reboots at the slightest movement and it took me several tries to finally log in on it tonight to delete all the user accounts before I send it back!
    Hopefully the replacement one is glitch free!
    Powerbook G4 1 ghz   Mac OS X (10.4.8)  
    Powerbook G4 1 ghz   Mac OS X (10.4.8)  

  • Mac Pro shuts down after setting up RAID (HELP!)

    So, I recently purchased a rev 1 Mac Pro and decided to setup a RAID using 4 750gb WD drives. I am not using a RAID card, simply using Disk Utility.
    I first combined drives in bays 1 and 2 (striped) and then combined drives in bays 3 and 4 (striped) to give me essentially two 1.5tb drives.
    I then created a mirrored RAID using the two striped raids so that I would have the speed of a striped RAID with the safety of a mirrored RAID.
    Once I did this, it showed up as one hard disk on my desktop (I was booting with an external). I then cloned my external drive to the new RAID disk on the desktop, and did so successfully.
    However, now when I try to boot from the RAID, it chimes, the Apple appears, and then the Mac Pro shuts down. I tried holding down option and all 4 drives appear. I tried booting from a different drive, and the same thing happens. I should also note that the firmware bar flashes on the screen before shutting down (looks like a really long pill).
    Any ideas? Does it sound like I did something wrong? I hate to start from scratch, as it takes all night to clone my external drive to the Mac Pro. Thanks for any help.

    Hello, Hatter. Thanks so much for the information. I went with the information from the Macworld article (I believe) "RAIDing the Mac Pro" and according to it this setup was supposedly a great idea. But, yes, it's not working out so perhaps not in this case.
    So, I have four brand new 750gb Caviar Black drives installed. If I understand you correctly, I should stripe 3 disks together, then use a 4th as backup (using Time Machine?). So, if I use the drives I have, I'll have a striped configuration that gives me 2.25TB of space, and a 750gb hard drive for backup. That technically would work for now, as I have about 660gb of data on the system (although in the future I'd need to swap out that 4th drive for a 2TB.
    So, if that is what you're suggesting, would you mind telling me exactly how I do that? I think I understand, but just want to make sure as this is my first Mac Pro and first time setting up a RAID. Thank you so much for your response.
    p.s.: I'm guessing I'll need to do a fresh start and clone my external drive all over again, correct?

  • Acrobat X Pro shuts down unexpectantly

    Acrobat X Pro shuts down when the comments pane is clicked.  Windows XP 32bit, Office 2007.  I don't have any issues on the XP 64bit install just on all my XP 32bit installs.  A couple machines show a generic error and others just close the program.  Any ideas?
    Thanks

    Does it crash? Will it be possible for you to share the crash dump with us?
    Method for generating the crash dump:
    1) Install 32bit windbg from internet.
    2) Launch the command prompt
    3) Navigate to folder "cd C:\Program Files\Debugging Tools for Windows (x86)"
    4) Type "windbg -I" and press enter
    5) Now do the steps to reproduce the crash. (Launch Acrobat and click comments pane)
    6) After it crashes observe if a windbg window is launched with the crash details. Click Yes if it asks you to save it.
    7) A windbg window will open with a rectangular text box at the bottom of it where you can type text.
    8) Create a folder "C:\labfiles"
    9) In the text box mentioned in step 7 enter the following: .dump /ma c:/labfiles/AcrobatCrash.dmp
    10) Press enter.
    11) Share the file @ C:\labfiles\AcrobatCrash.dmp
    Thanks in advance.
    -Abhilasha

  • Macbook pro shuts down when iPhone 5 is immediately connected

    I wanted to transfer photos form my phone to my iphoto and my macbook pro compeltely died immediatly. I tried a different macbook pro and immedialty the second macbook pro shut down. I tried again but it shut down again. Any ideas why?

    Do you have the latest iTunes 11.1.4?

  • Macbook pro  shuts down at 15% battery

    ok so my macbook pro shuts down at 15% battery by it self without warning just started happening yesterday i got this model in october 2009. Need to know if i have to get a new battery confused with what is wrong with it any reply would be greatly appreciated

    In System Profiler/Power what does it say about the Cycles and Condition ?
    Reset the SMC (System Management Controller) and re-calibrate the Battery (you should re-calibrate every couple of months).

  • MacBook Pro shuts down when i close the lid

    Hey,
    My MacBook Pro shuts down when i close the lid.
    It started to do this one or two times, but now it is every time.
    I have the latest battery update, so this should not be the issue here..
    Any sugestions??
    I have started to suspect the it might be some faulty conecctions or somthing..

    If it's unable to go into the proper sleep state for some reason then it will do that.
    Run /Utilities/Console and click 'All Messages' top left then close the lid, wait a minute then open it again - if it's shut down then reboot and open Console again and check the latest log lines looking for 'sleepimage' - it should give you an indication of what happened/didn't. If you're not sure what it all means post _just those lines_ here.

  • Macbook pro shuts down intermittently

    my macbook pro shuts down intermittently i do not know what the problem is ?

    Dsannin,
    if you boot your MacBook Pro in Safe mode, does it behave in the same way?

  • Macbook Pro Shuts Down During or Soon After Start-Up

    My macbook pro shuts down after booting up. Sometimes it makes it to the desktop, but sometimes just to the gray screen. Also, at desktop, it asks if I want to shut down. Is something pressing on the shutdown button? Any help on what to do?

    Try resetting the SMC.

  • MacBook Pro shuts down and won't turn on

    My MacBook Pro shuts down suddenly and won't start after pushing the power button??????

    Hi r,
    Is it running very hot, as in, could this be a thermal shutdown? Download iStat Pro if you don't already have it.

Maybe you are looking for

  • Displaying Keynote on TV

    I want to show a looping keynote slideshow on my TV- my TV has a USB port in additional to the yellow, red, white plugs. Can I use the USB port to do this?  What kind of cords do I need? Do I need additional cords if I want sound as well?

  • Replacing MacBook Pro Screen with higher resolution screen?

    I bought a MacBook Pro 15" today which has the lower end screen resolution.  I originally wanted the higher resolution screen but the guys in the shop said they didn't sell them in the shops, only online, but since I wanted one before I headed off to

  • Attention ! my R/3 system is in the army ! it includes powerful weapons...

    Hi, If you have a SAP R/3 4.7 system, go in transaction SMW0. Select "Binary Data for WebRFC applications" and press "F8" twice. You get the list of binary objects. Check object /ISDFPS/LEOPARD, download it as a file named leopard.jpg. open this jpg

  • G4 Hard Drive Question

    Hello- I have been having some on again off again troubles with my G4 PowerMac. I recently fixed up a kernal panic issue and everything has been working fine, I removed some memory and everything appeared to be great. I was listening to a show on the

  • How to install CS2 on another computer

    I have CS2 installed on my main workstation, but now I have a laptop and it would be great to have it installed there as well. I've tried customer support but I don't have that many hours to wait on the phone. Is there a way I can get an additional l